regulator: add smb208 support
Subsystems (4)
PATCH 1/1 regulator: add smb208 support
Smb208 regulators are used on some ipq806x soc. Add support for it to make it avaiable on some routers that use it.
--- Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 4 ++++ drivers/regulator/qcom_rpm-regulator.c | 9 +++++++++ 2 files changed, 13 insertions(+)
Documentation/devicetree/bindings/mfd/qcom-rpm.txt +4 -0
@@ -61,6 +61,7 @@ Regulator nodes are identified by their compatible: "qcom,rpm-pm8901-regulators" "qcom,rpm-pm8921-regulators" "qcom,rpm-pm8018-regulators" + "qcom,rpm-smb208-regulators" - vdd_l0_l1_lvs-supply: - vdd_l2_l11_l12-supply:
@@ -171,6 +172,9 @@ pm8018: s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l14, lvs1 +smb208: + s1a, s1b, s2a, s2b + The content of each sub-node is defined by the standard binding for regulators - see regulator.txt - with additional custom properties described below:
drivers/regulator/qcom_rpm-regulator.c +9 -0
@@ -925,12 +925,21 @@ static const struct rpm_regulator_data rpm_pm8921_regulators[] = { { } }; +static const struct rpm_regulator_data rpm_smb208_regulators[] = { + {"s1a" , QCOM_RPM_SMB208_S1a, &smb208_smps,"vin_s1a" }, + {"s1b" , QCOM_RPM_SMB208_S1b, &smb208_smps,"vin_s1b" }, + {"s2a" , QCOM_RPM_SMB208_S2a, &smb208_smps,"vin_s2a" }, + {"s2b" , QCOM_RPM_SMB208_S2b, &smb208_smps,"vin_s2b" }, + { } +}; +static const struct of_device_id rpm_of_match[] = { { .compatible ="qcom,rpm-pm8018-regulators" , .data = &rpm_pm8018_regulators }, { .compatible ="qcom,rpm-pm8058-regulators" , .data = &rpm_pm8058_regulators }, { .compatible ="qcom,rpm-pm8901-regulators" , .data = &rpm_pm8901_regulators }, { .compatible ="qcom,rpm-pm8921-regulators" , .data = &rpm_pm8921_regulators }, + { .compatible ="qcom,rpm-smb208-regulators" , .data = &rpm_smb208_regulators }, { } };MODULE_DEVICE_TABLE (of, rpm_of_match);
Signature · 1 line
2.25.0
Quoted 8 lines · Ansuel Smith
Smb208 regulators are used on some ipq806x soc. Add support for it to make it avaiable on some routers that use it.
Signed-off-by Adrian Panella <[email protected]>Signed-off-by Ansuel Smith <[email protected]>--- Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 4 ++++
Quoted 2 lines
drivers/regulator/qcom_rpm-regulator.c | 9 +++++++++ 2 files changed, 13 insertions(+)
Signature · 4 lines
Lee Jones [李琼斯] Linaro Services Technical Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
Quoted 11 lines · Ansuel Smith
Smb208 regulators are used on some ipq806x soc. Add support for it to make it avaiable on some routers that use it.
Signed-off-by Adrian Panella <[email protected]>Signed-off-by Ansuel Smith <[email protected]>--- Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 4 ++++ drivers/regulator/qcom_rpm-regulator.c | 9 +++++++++ 2 files changed, 13 insertions(+)
Mark Brown
maintainerApplied "regulator: add smb208 support" to the regulator tree
In reply to Ansuel SmithThe patch
regulator: add smb208 support
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
From b5f25304aece9f2e7eaab275bbb5461c666bf38c Mon Sep 17 00:00:00 2001
From: Ansuel Smith <[email protected]>
Date: Wed, 19 Feb 2020 17:37:11 +0100
Subject: [PATCH] regulator: add smb208 support
Smb208 regulators are used on some ipq806x soc. Add support for it to make it avaiable on some routers that use it.
--- Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 4 ++++ drivers/regulator/qcom_rpm-regulator.c | 9 +++++++++ 2 files changed, 13 insertions(+)
Documentation/devicetree/bindings/mfd/qcom-rpm.txt +4 -0
@@ -61,6 +61,7 @@ Regulator nodes are identified by their compatible: "qcom,rpm-pm8901-regulators" "qcom,rpm-pm8921-regulators" "qcom,rpm-pm8018-regulators" + "qcom,rpm-smb208-regulators" - vdd_l0_l1_lvs-supply: - vdd_l2_l11_l12-supply:
@@ -171,6 +172,9 @@ pm8018: s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l14, lvs1 +smb208: + s1a, s1b, s2a, s2b + The content of each sub-node is defined by the standard binding for regulators - see regulator.txt - with additional custom properties described below:
drivers/regulator/qcom_rpm-regulator.c +9 -0
@@ -925,12 +925,21 @@ static const struct rpm_regulator_data rpm_pm8921_regulators[] = { { } }; +static const struct rpm_regulator_data rpm_smb208_regulators[] = { + {"s1a" , QCOM_RPM_SMB208_S1a, &smb208_smps,"vin_s1a" }, + {"s1b" , QCOM_RPM_SMB208_S1b, &smb208_smps,"vin_s1b" }, + {"s2a" , QCOM_RPM_SMB208_S2a, &smb208_smps,"vin_s2a" }, + {"s2b" , QCOM_RPM_SMB208_S2b, &smb208_smps,"vin_s2b" }, + { } +}; +static const struct of_device_id rpm_of_match[] = { { .compatible ="qcom,rpm-pm8018-regulators" , .data = &rpm_pm8018_regulators }, { .compatible ="qcom,rpm-pm8058-regulators" , .data = &rpm_pm8058_regulators }, { .compatible ="qcom,rpm-pm8901-regulators" , .data = &rpm_pm8901_regulators }, { .compatible ="qcom,rpm-pm8921-regulators" , .data = &rpm_pm8921_regulators }, + { .compatible ="qcom,rpm-smb208-regulators" , .data = &rpm_smb208_regulators }, { } };MODULE_DEVICE_TABLE (of, rpm_of_match);
Signature · 1 line
2.20.1