Tighten qemu-img rules on missing backing format
v2 cover Tighten qemu-img rules on missing backing format
In v2:
- patch 3 changes to ALWAYS warn if -b provided without -F (rather than being silent on raw or json:) [Peter]
- patch 3 changes to ONLY write implied format if probe read raw (all other probes are still mentioned, but not implicitly written) [Peter]
- couple more tests converted in patch 1 [fallout from the above]
Eric Blake (3):
iotests: Specify explicit backing format where sensible
block: Add support to warn on backing file change without format
qemu-img: Deprecate use of -b without -F
qemu-deprecated.texi | 15 +++++++++++ include/block/block.h | 4 +-- block.c | 34 ++++++++++++++++++++++--- block/qcow2.c | 2 +- block/stream.c | 2 +- blockdev.c | 3 ++- qemu-img.c | 10 ++++++-- tests/qemu-iotests/017 | 2 +- tests/qemu-iotests/017.out | 2 +- tests/qemu-iotests/018 | 2 +- tests/qemu-iotests/018.out | 2 +- tests/qemu-iotests/019 | 5 ++-- tests/qemu-iotests/019.out | 2 +- tests/qemu-iotests/020 | 4 +-- tests/qemu-iotests/020.out | 4 +-- tests/qemu-iotests/024 | 8 +++--- tests/qemu-iotests/024.out | 5 ++-- tests/qemu-iotests/028 | 4 +-- tests/qemu-iotests/028.out | 2 +- tests/qemu-iotests/030 | 26 +++++++++++++------ tests/qemu-iotests/034 | 2 +- tests/qemu-iotests/034.out | 2 +- tests/qemu-iotests/037 | 2 +- tests/qemu-iotests/037.out | 2 +- tests/qemu-iotests/038 | 2 +- tests/qemu-iotests/038.out | 2 +- tests/qemu-iotests/039 | 3 ++- tests/qemu-iotests/039.out | 2 +- tests/qemu-iotests/040 | 47 +++++++++++++++++++++++++---------- tests/qemu-iotests/041 | 37 ++++++++++++++++++--------- tests/qemu-iotests/042 | 4 +-- tests/qemu-iotests/043 | 18 +++++++------- tests/qemu-iotests/043.out | 16 +++++++----- tests/qemu-iotests/046 | 2 +- tests/qemu-iotests/046.out | 2 +- tests/qemu-iotests/050 | 4 +-- tests/qemu-iotests/050.out | 2 +- tests/qemu-iotests/051 | 2 +- tests/qemu-iotests/051.out | 2 +- tests/qemu-iotests/051.pc.out | 2 +- tests/qemu-iotests/056 | 3 ++- tests/qemu-iotests/060 | 2 +- tests/qemu-iotests/060.out | 2 +- tests/qemu-iotests/061 | 10 ++++---- tests/qemu-iotests/061.out | 10 ++++---- tests/qemu-iotests/069 | 2 +- tests/qemu-iotests/069.out | 2 +- tests/qemu-iotests/073 | 2 +- tests/qemu-iotests/073.out | 2 +- tests/qemu-iotests/082 | 16 +++++++----- tests/qemu-iotests/082.out | 16 ++++++------ tests/qemu-iotests/085 | 4 +-- tests/qemu-iotests/085.out | 6 ++--- tests/qemu-iotests/089 | 2 +- tests/qemu-iotests/089.out | 2 +- tests/qemu-iotests/095 | 4 +-- tests/qemu-iotests/095.out | 4 +-- tests/qemu-iotests/097 | 4 +-- tests/qemu-iotests/097.out | 16 ++++++------ tests/qemu-iotests/098 | 2 +- tests/qemu-iotests/098.out | 8 +++--- tests/qemu-iotests/110 | 4 +-- tests/qemu-iotests/110.out | 4 +-- tests/qemu-iotests/114 | 4 +-- tests/qemu-iotests/114.out | 1 + tests/qemu-iotests/122 | 27 ++++++++++++-------- tests/qemu-iotests/122.out | 8 +++--- tests/qemu-iotests/126 | 4 +-- tests/qemu-iotests/126.out | 4 +-- tests/qemu-iotests/127 | 4 +-- tests/qemu-iotests/127.out | 4 +-- tests/qemu-iotests/129 | 3 ++- tests/qemu-iotests/133 | 2 +- tests/qemu-iotests/133.out | 2 +- tests/qemu-iotests/139 | 2 +- tests/qemu-iotests/141 | 4 +-- tests/qemu-iotests/141.out | 4 +-- tests/qemu-iotests/142 | 2 +- tests/qemu-iotests/142.out | 2 +- tests/qemu-iotests/153 | 14 +++++------ tests/qemu-iotests/153.out | 35 ++++++++++++++------------ tests/qemu-iotests/154 | 42 +++++++++++++++---------------- tests/qemu-iotests/154.out | 42 +++++++++++++++---------------- tests/qemu-iotests/155 | 12 ++++++--- tests/qemu-iotests/156 | 9 ++++--- tests/qemu-iotests/156.out | 6 ++--- tests/qemu-iotests/158 | 2 +- tests/qemu-iotests/158.out | 2 +- tests/qemu-iotests/161 | 8 +++--- tests/qemu-iotests/161.out | 8 +++--- tests/qemu-iotests/176 | 4 +-- tests/qemu-iotests/176.out | 32 ++++++++++++------------ tests/qemu-iotests/177 | 2 +- tests/qemu-iotests/177.out | 2 +- tests/qemu-iotests/179 | 2 +- tests/qemu-iotests/179.out | 2 +- tests/qemu-iotests/189 | 2 +- tests/qemu-iotests/189.out | 2 +- tests/qemu-iotests/191 | 12 ++++----- tests/qemu-iotests/191.out | 12 ++++----- tests/qemu-iotests/195 | 6 ++--- tests/qemu-iotests/195.out | 6 ++--- tests/qemu-iotests/198 | 2 +- tests/qemu-iotests/198.out | 3 ++- tests/qemu-iotests/204 | 2 +- tests/qemu-iotests/204.out | 2 +- tests/qemu-iotests/216 | 2 +- tests/qemu-iotests/224 | 4 +-- tests/qemu-iotests/228 | 5 ++-- tests/qemu-iotests/245 | 3 ++- tests/qemu-iotests/249 | 4 +-- tests/qemu-iotests/249.out | 4 +-- tests/qemu-iotests/252 | 2 +- tests/qemu-iotests/257 | 3 ++- tests/qemu-iotests/267 | 4 +-- tests/qemu-iotests/267.out | 6 ++--- tests/qemu-iotests/270 | 2 +- tests/qemu-iotests/270.out | 2 +- tests/qemu-iotests/273 | 4 +-- tests/qemu-iotests/273.out | 4 +-- tests/qemu-iotests/279 | 4 +-- tests/qemu-iotests/279.out | 4 +-- 122 files changed, 476 insertions(+), 351 deletions(-)
Signature · 1 line
2.25.1
PATCH v2 1/3 iotests: Specify explicit backing format where sensible
There are many existing qcow2 images that specify a backing file but no format. This has been the source of CVEs in the past, but has become more prominent of a problem now that libvirt has switched to -blockdev. With older -drive, at least the probing was always done by qemu (so the only risk of a changed format between successive boots of a guest was if qemu was upgraded and probed differently). But with newer -blockdev, libvirt must specify a format; if libvirt guesses raw where the image was formatted, this results in data corruption visible to the guest; conversely, if libvirt guesses qcow2 where qemu was using raw, this can result in potential security holes, so modern libvirt instead refuses to use images without explicit backing format.
The change in libvirt to reject images without explicit backing format has pointed out that a number of tools have been far too reliant on probing in the past. It's time to set a better example in our own iotests of properly setting this parameter.
iotest calls to create, rebase, convert, and amend are all impacted to some degree. It's a bit annoying that we are inconsistent on command line - while all of those accept -o backing_file=...,backing_fmt=..., the shortcuts are different: create and rebase have -b and -F, convert has -B but no -F, and amend has no shortcuts.
--- tests/qemu-iotests/017 | 2 +- tests/qemu-iotests/017.out | 2 +- tests/qemu-iotests/018 | 2 +- tests/qemu-iotests/018.out | 2 +- tests/qemu-iotests/019 | 5 ++-- tests/qemu-iotests/019.out | 2 +- tests/qemu-iotests/020 | 4 +-- tests/qemu-iotests/020.out | 4 +-- tests/qemu-iotests/024 | 8 +++--- tests/qemu-iotests/024.out | 5 ++-- tests/qemu-iotests/028 | 4 +-- tests/qemu-iotests/028.out | 2 +- tests/qemu-iotests/030 | 26 +++++++++++++------ tests/qemu-iotests/034 | 2 +- tests/qemu-iotests/034.out | 2 +- tests/qemu-iotests/037 | 2 +- tests/qemu-iotests/037.out | 2 +- tests/qemu-iotests/038 | 2 +- tests/qemu-iotests/038.out | 2 +- tests/qemu-iotests/039 | 3 ++- tests/qemu-iotests/039.out | 2 +- tests/qemu-iotests/040 | 47 +++++++++++++++++++++++++---------- tests/qemu-iotests/041 | 37 ++++++++++++++++++--------- tests/qemu-iotests/042 | 4 +-- tests/qemu-iotests/043 | 18 +++++++------- tests/qemu-iotests/043.out | 16 +++++++----- tests/qemu-iotests/046 | 2 +- tests/qemu-iotests/046.out | 2 +- tests/qemu-iotests/050 | 4 +-- tests/qemu-iotests/050.out | 2 +- tests/qemu-iotests/051 | 2 +- tests/qemu-iotests/051.out | 2 +- tests/qemu-iotests/051.pc.out | 2 +- tests/qemu-iotests/056 | 3 ++- tests/qemu-iotests/060 | 2 +- tests/qemu-iotests/060.out | 2 +- tests/qemu-iotests/061 | 10 ++++---- tests/qemu-iotests/061.out | 10 ++++---- tests/qemu-iotests/069 | 2 +- tests/qemu-iotests/069.out | 2 +- tests/qemu-iotests/073 | 2 +- tests/qemu-iotests/073.out | 2 +- tests/qemu-iotests/082 | 16 +++++++----- tests/qemu-iotests/082.out | 16 ++++++------ tests/qemu-iotests/085 | 4 +-- tests/qemu-iotests/085.out | 6 ++--- tests/qemu-iotests/089 | 2 +- tests/qemu-iotests/089.out | 2 +- tests/qemu-iotests/095 | 4 +-- tests/qemu-iotests/095.out | 4 +-- tests/qemu-iotests/097 | 4 +-- tests/qemu-iotests/097.out | 16 ++++++------ tests/qemu-iotests/098 | 2 +- tests/qemu-iotests/098.out | 8 +++--- tests/qemu-iotests/110 | 4 +-- tests/qemu-iotests/110.out | 4 +-- tests/qemu-iotests/122 | 27 ++++++++++++-------- tests/qemu-iotests/122.out | 8 +++--- tests/qemu-iotests/126 | 4 +-- tests/qemu-iotests/126.out | 4 +-- tests/qemu-iotests/127 | 4 +-- tests/qemu-iotests/127.out | 4 +-- tests/qemu-iotests/129 | 3 ++- tests/qemu-iotests/133 | 2 +- tests/qemu-iotests/133.out | 2 +- tests/qemu-iotests/139 | 2 +- tests/qemu-iotests/141 | 4 +-- tests/qemu-iotests/141.out | 4 +-- tests/qemu-iotests/142 | 2 +- tests/qemu-iotests/142.out | 2 +- tests/qemu-iotests/153 | 14 +++++------ tests/qemu-iotests/153.out | 35 ++++++++++++++------------ tests/qemu-iotests/154 | 42 +++++++++++++++---------------- tests/qemu-iotests/154.out | 42 +++++++++++++++---------------- tests/qemu-iotests/155 | 12 ++++++--- tests/qemu-iotests/156 | 9 ++++--- tests/qemu-iotests/156.out | 6 ++--- tests/qemu-iotests/158 | 2 +- tests/qemu-iotests/158.out | 2 +- tests/qemu-iotests/161 | 8 +++--- tests/qemu-iotests/161.out | 8 +++--- tests/qemu-iotests/176 | 4 +-- tests/qemu-iotests/176.out | 32 ++++++++++++------------ tests/qemu-iotests/177 | 2 +- tests/qemu-iotests/177.out | 2 +- tests/qemu-iotests/179 | 2 +- tests/qemu-iotests/179.out | 2 +- tests/qemu-iotests/189 | 2 +- tests/qemu-iotests/189.out | 2 +- tests/qemu-iotests/191 | 12 ++++----- tests/qemu-iotests/191.out | 12 ++++----- tests/qemu-iotests/195 | 6 ++--- tests/qemu-iotests/195.out | 6 ++--- tests/qemu-iotests/198 | 2 +- tests/qemu-iotests/198.out | 3 ++- tests/qemu-iotests/204 | 2 +- tests/qemu-iotests/204.out | 2 +- tests/qemu-iotests/216 | 2 +- tests/qemu-iotests/224 | 4 +-- tests/qemu-iotests/228 | 5 ++-- tests/qemu-iotests/245 | 3 ++- tests/qemu-iotests/249 | 4 +-- tests/qemu-iotests/249.out | 4 +-- tests/qemu-iotests/252 | 2 +- tests/qemu-iotests/257 | 3 ++- tests/qemu-iotests/267 | 4 +-- tests/qemu-iotests/267.out | 6 ++--- tests/qemu-iotests/270 | 2 +- tests/qemu-iotests/270.out | 2 +- tests/qemu-iotests/273 | 4 +-- tests/qemu-iotests/273.out | 4 +-- tests/qemu-iotests/279 | 4 +-- tests/qemu-iotests/279.out | 4 +-- 113 files changed, 414 insertions(+), 338 deletions(-)
tests/qemu-iotests/017 +1 -1
@@ -66,7 +66,7 @@ echo "Creating test image with backing file" echo TEST_IMG=$TEST_IMG_SAVE -_make_test_img -b "$TEST_IMG.base" 6G +_make_test_img -b "$TEST_IMG.base" -F $IMGFMT 6G echo "Filling test image" echo
tests/qemu-iotests/017.out +1 -1
@@ -269,7 +269,7 @@ wrote 65536/65536 bytes at offset 4295032832 No errors were found on the image. Creating test image with backing file -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=6442450944 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=6442450944 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT Filling test image === IO: pattern 1
tests/qemu-iotests/018 +1 -1
@@ -66,7 +66,7 @@ echo "Creating test image with backing file" echo TEST_IMG="$TEST_IMG_SAVE.orig" -_make_test_img -b "$TEST_IMG_SAVE.base" 6G +_make_test_img -b "$TEST_IMG_SAVE.base" -F $IMGFMT 6G echo "Filling test image" echo
tests/qemu-iotests/018.out +1 -1
@@ -269,7 +269,7 @@ wrote 65536/65536 bytes at offset 4295032832 No errors were found on the image. Creating test image with backing file -Formatting 'TEST_DIR/t.IMGFMT.orig', fmt=IMGFMT size=6442450944 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT.orig', fmt=IMGFMT size=6442450944 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT Filling test image === IO: pattern 1
tests/qemu-iotests/019 +3 -2
@@ -74,7 +74,7 @@ echo "Creating test image with backing file" echo TEST_IMG="$TEST_IMG_SAVE.orig" -_make_test_img -b "$TEST_IMG_SAVE.base" 6G +_make_test_img -b "$TEST_IMG_SAVE.base" -F $IMGFMT 6G echo "Filling test image" echo
@@ -98,7 +98,8 @@ for backing_option in "-B " "-o backing_file="; do echo echo Testing conversion with $backing_option"$TEST_IMG.base" | _filter_testdir | _filter_imgfmt echo - $QEMU_IMG convert -f $IMGFMT -O $IMGFMT $backing_option"$TEST_IMG.base" "$TEST_IMG.orig" "$TEST_IMG" + $QEMU_IMG convert -f $IMGFMT -O $IMGFMT $backing_option"$TEST_IMG.base" \ + -o backing_fmt=$IMGFMT "$TEST_IMG.orig" "$TEST_IMG" echo "Checking if backing clusters are allocated when they shouldn't" echo
tests/qemu-iotests/019.out +1 -1
@@ -269,7 +269,7 @@ wrote 65536/65536 bytes at offset 4296015872 No errors were found on the image. Creating test image with backing file -Formatting 'TEST_DIR/t.IMGFMT.orig', fmt=IMGFMT size=6442450944 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT.orig', fmt=IMGFMT size=6442450944 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT Filling test image === IO: pattern 43
tests/qemu-iotests/020 +2 -2
@@ -70,7 +70,7 @@ echo "Creating test image with backing file" echo TEST_IMG="$TEST_IMG_SAVE" -_make_test_img -b "$TEST_IMG.base" 6G +_make_test_img -b "$TEST_IMG.base" -F $IMGFMT 6G echo "Filling test image" echo
@@ -126,7 +126,7 @@ _make_test_img -b "json:{'driver': '$IMGFMT', 'image': { 'driver': 'file', 'filename': '$TEST_IMG.base' - }}}" + }}}" -F $IMGFMT # Just write anything so committing will not be a no-op $QEMU_IO -c 'writev 0 64k' "$TEST_IMG" | _filter_qemu_io
tests/qemu-iotests/020.out +2 -2
@@ -269,7 +269,7 @@ wrote 65536/65536 bytes at offset 4295032832 No errors were found on the image. Creating test image with backing file -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=6442450944 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=6442450944 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT Filling test image === IO: pattern 1
@@ -1090,7 +1090,7 @@ Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 backing_file=json:{'driv 'image': { 'driver': 'file',, 'filename': 'TEST_DIR/t.IMGFMT.base' - }}} + }}} backing_fmt=IMGFMT wrote 65536/65536 bytes at offset 0 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) qemu-img: Block job failed: No space left on device
tests/qemu-iotests/024 +4 -4
@@ -83,7 +83,7 @@ TEST_IMG="$TEST_IMG_SAVE" echo "Creating COW image" echo -_make_test_img -b "$TEST_IMG.base_old" 1G +_make_test_img -b "$TEST_IMG.base_old" -F $IMGFMT 1G io_pattern writev 0 $((4 * CLUSTER_SIZE)) 0 1 0x33 io_pattern writev $((8 * CLUSTER_SIZE)) $((4 * CLUSTER_SIZE)) 0 1 0x33
@@ -109,7 +109,7 @@ io_pattern readv $((15 * CLUSTER_SIZE)) $CLUSTER_SIZE 0 1 0x00 echo echo Rebase and test again echo -$QEMU_IMG rebase -b "$TEST_IMG.base_new" "$TEST_IMG" +$QEMU_IMG rebase -b "$TEST_IMG.base_new" -F $IMGFMT "$TEST_IMG" io_pattern readv $((0 * CLUSTER_SIZE)) $CLUSTER_SIZE 0 1 0x33 io_pattern readv $((1 * CLUSTER_SIZE)) $CLUSTER_SIZE 0 1 0x33 io_pattern readv $((2 * CLUSTER_SIZE)) $CLUSTER_SIZE 0 1 0x33
@@ -159,7 +159,7 @@ OVERLAY="$TEST_DIR/$OVERLAY_WREL" TEST_IMG=$BASE_OLD _make_test_img 1M TEST_IMG=$BASE_NEW _make_test_img 1M -TEST_IMG=$OVERLAY _make_test_img -b "$BASE_OLD_OREL" 1M +TEST_IMG=$OVERLAY _make_test_img -b "$BASE_OLD_OREL" -F $IMGFMT 1M echo
@@ -176,7 +176,7 @@ $QEMU_IO "$BASE_NEW" \ echo pushd "$TEST_DIR" >/dev/null -$QEMU_IMG rebase -f "$IMGFMT" -b "$BASE_NEW_OREL" "$OVERLAY_WREL" +$QEMU_IMG rebase -f "$IMGFMT" -b "$BASE_NEW_OREL" -F $IMGFMT "$OVERLAY_WREL" popd >/dev/null # Verify the backing path is correct
tests/qemu-iotests/024.out +3 -2
@@ -33,7 +33,7 @@ wrote 131072/131072 bytes at offset 786432 128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) Creating COW image -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824 backing_file=TEST_DIR/t.IMGFMT.base_old +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824 backing_file=TEST_DIR/t.IMGFMT.base_old backing_fmt=IMGFMT === IO: pattern 0x33 wrote 262144/262144 bytes at offset 0 256 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -146,7 +146,7 @@ read 65536/65536 bytes at offset 983040 Formatting 'TEST_DIR/subdir/t.IMGFMT.base_old', fmt=IMGFMT size=1048576 Formatting 'TEST_DIR/subdir/t.IMGFMT.base_new', fmt=IMGFMT size=1048576 -Formatting 'TEST_DIR/subdir/t.IMGFMT', fmt=IMGFMT size=1048576 backing_file=t.IMGFMT.base_old +Formatting 'TEST_DIR/subdir/t.IMGFMT', fmt=IMGFMT size=1048576 backing_file=t.IMGFMT.base_old backing_fmt=IMGFMT wrote 131072/131072 bytes at offset 0 128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -158,6 +158,7 @@ wrote 65536/65536 bytes at offset 196608 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) backing file: t.IMGFMT.base_new (actual path: TEST_DIR/subdir/t.IMGFMT.base_new) +backing file format: IMGFMT read 65536/65536 bytes at offset 0 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
tests/qemu-iotests/028 +2 -2
@@ -76,7 +76,7 @@ echo "Creating test image with backing file" echo TEST_IMG="$TEST_IMG_SAVE" -_make_test_img -b "$TEST_IMG.base" $image_size +_make_test_img -b "$TEST_IMG.base" -F $IMGFMT $image_size echo "Filling test image" echo
@@ -101,7 +101,7 @@ io_zero readv $(( offset + 32 * 1024 )) 512 1024 32 _check_test_img # Rebase it on top of its base image -$QEMU_IMG rebase -b "$TEST_IMG.base" "$TEST_IMG" +$QEMU_IMG rebase -b "$TEST_IMG.base" -F $IMGFMT "$TEST_IMG" echo echo block-backup
tests/qemu-iotests/028.out +1 -1
@@ -70,7 +70,7 @@ wrote 512/512 bytes at offset 3221225984 No errors were found on the image. Creating test image with backing file -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=4294968832 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=4294968832 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT Filling test image === IO: pattern 196
tests/qemu-iotests/030 +19 -7
@@ -32,8 +32,12 @@ class TestSingleDrive(iotests.QMPTestCase): def setUp(self): iotests.create_image(backing_img, TestSingleDrive.image_len) - qemu_img('create', '-f', iotests.imgfmt, '-o', 'backing_file=%s' % backing_img, mid_img) - qemu_img('create', '-f', iotests.imgfmt, '-o', 'backing_file=%s' % mid_img, test_img) + qemu_img('create', '-f', iotests.imgfmt, + '-o', 'backing_file=%s' % backing_img, + '-F', 'raw', mid_img) + qemu_img('create', '-f', iotests.imgfmt, + '-o', 'backing_file=%s' % mid_img, + '-F', iotests.imgfmt, test_img) qemu_io('-f', 'raw', '-c', 'write -P 0x1 0 512', backing_img) qemu_io('-f', iotests.imgfmt, '-c', 'write -P 0x1 524288 512', mid_img) self.vm = iotests.VM().add_drive("blkdebug::" + test_img,
@@ -199,7 +203,8 @@ class TestParallelOps(iotests.QMPTestCase): iotests.create_image(self.imgs[0], self.image_len) for i in range(1, self.num_imgs): qemu_img('create', '-f', iotests.imgfmt, - '-o', 'backing_file=%s' % self.imgs[i-1], self.imgs[i]) + '-o', 'backing_file=%s' % self.imgs[i-1], + '-F', 'raw' if i == 1 else iotests.imgfmt, self.imgs[i]) # Put data into the images we are copying data from odd_img_indexes = [x for x in reversed(range(self.num_imgs)) if x % 2 == 1]
@@ -544,7 +549,8 @@ class TestQuorum(iotests.QMPTestCase): qemu_io('-f', iotests.imgfmt, '-c', 'write -P 0x55 0 1024', backing_img) qemu_img('create', '-f', iotests.imgfmt, - '-o', 'backing_file=%s' % backing_img, child_img) + '-o', 'backing_file=%s' % backing_img, + '-F', iotests.imgfmt, child_img) opts.append("children.%d.file.filename=%s" % (i, child_img)) opts.append("children.%d.node-name=node%d" % (i, i))
@@ -585,7 +591,9 @@ class TestSmallerBackingFile(iotests.QMPTestCase): def setUp(self): iotests.create_image(backing_img, self.backing_len) - qemu_img('create', '-f', iotests.imgfmt, '-o', 'backing_file=%s' % backing_img, test_img, str(self.image_len)) + qemu_img('create', '-f', iotests.imgfmt, + '-o', 'backing_file=%s' % backing_img, + '-F', 'raw', test_img, str(self.image_len)) self.vm = iotests.VM().add_drive(test_img) self.vm.launch()
@@ -848,7 +856,9 @@ class TestStreamStop(iotests.QMPTestCase): def setUp(self): qemu_img('create', backing_img, str(TestStreamStop.image_len)) qemu_io('-f', 'raw', '-c', 'write -P 0x1 0 32M', backing_img) - qemu_img('create', '-f', iotests.imgfmt, '-o', 'backing_file=%s' % backing_img, test_img) + qemu_img('create', '-f', iotests.imgfmt, + '-o', 'backing_file=%s' % backing_img, + '-F', 'raw', test_img) qemu_io('-f', iotests.imgfmt, '-c', 'write -P 0x1 32M 32M', test_img) self.vm = iotests.VM().add_drive("blkdebug::" + test_img) self.vm.launch()
@@ -879,7 +889,9 @@ class TestSetSpeed(iotests.QMPTestCase): def setUp(self): qemu_img('create', backing_img, str(TestSetSpeed.image_len)) qemu_io('-f', 'raw', '-c', 'write -P 0x1 0 32M', backing_img) - qemu_img('create', '-f', iotests.imgfmt, '-o', 'backing_file=%s' % backing_img, test_img) + qemu_img('create', '-f', iotests.imgfmt, + '-o', 'backing_file=%s' % backing_img, + '-F', 'raw', test_img) qemu_io('-f', iotests.imgfmt, '-c', 'write -P 0x1 32M 32M', test_img) self.vm = iotests.VM().add_drive('blkdebug::' + test_img) self.vm.launch()
tests/qemu-iotests/034 +1 -1
@@ -58,7 +58,7 @@ $QEMU_IO -c "write -P 0x55 0 1M" "$TEST_IMG" | _filter_qemu_io TEST_IMG="$TEST_IMG_SAVE" -_make_test_img -b "$TEST_IMG.base" 6G +_make_test_img -b "$TEST_IMG.base" -F $IMGFMT 6G echo echo "== zero write with backing file =="
tests/qemu-iotests/034.out +1 -1
@@ -4,7 +4,7 @@ QA output created by 034 Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=134217728 wrote 1048576/1048576 bytes at offset 0 1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=6442450944 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=6442450944 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT == zero write with backing file == wrote 196608/196608 bytes at offset 65536
tests/qemu-iotests/037 +1 -1
@@ -74,7 +74,7 @@ backing_io 0 256 write | $QEMU_IO "$TEST_IMG" | _filter_qemu_io TEST_IMG="$TEST_IMG_SAVE" -_make_test_img -b "$TEST_IMG.base" 6G +_make_test_img -b "$TEST_IMG.base" -F $IMGFMT 6G echo echo "== COW in a single cluster =="
tests/qemu-iotests/037.out +1 -1
@@ -514,7 +514,7 @@ wrote 512/512 bytes at offset 130048 512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 512/512 bytes at offset 130560 512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=6442450944 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=6442450944 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT == COW in a single cluster == wrote 2048/2048 bytes at offset 0
tests/qemu-iotests/038 +1 -1
@@ -71,7 +71,7 @@ backing_io 0 256 write | $QEMU_IO "$TEST_IMG" | _filter_qemu_io TEST_IMG="$TEST_IMG_SAVE" -_make_test_img -b "$TEST_IMG.base" 6G +_make_test_img -b "$TEST_IMG.base" -F $IMGFMT 6G echo echo "== Some concurrent requests touching the same cluster =="
tests/qemu-iotests/038.out +1 -1
@@ -514,7 +514,7 @@ wrote 65536/65536 bytes at offset 16646144 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 65536/65536 bytes at offset 16711680 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=6442450944 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=6442450944 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT == Some concurrent requests touching the same cluster == wrote 65536/65536 bytes at offset XXX
tests/qemu-iotests/039 +2 -1
@@ -133,7 +133,8 @@ echo "== Committing to a backing file with lazy_refcounts=on ==" TEST_IMG="$TEST_IMG".base _make_test_img -o "compat=1.1,lazy_refcounts=on" $size -_make_test_img -o "compat=1.1,lazy_refcounts=on,backing_file=$TEST_IMG.base" $size +_make_test_img -o "compat=1.1,lazy_refcounts=on,backing_file=$TEST_IMG.base" \ + -F $IMGFMT $size $QEMU_IO -c "write 0 512" "$TEST_IMG" | _filter_qemu_io $QEMU_IMG commit "$TEST_IMG"
tests/qemu-iotests/039.out +1 -1
@@ -66,7 +66,7 @@ No errors were found on the image. == Committing to a backing file with lazy_refcounts=on == Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=134217728 -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT wrote 512/512 bytes at offset 0 512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) Image committed.
tests/qemu-iotests/040 +34 -13
77 lines not on this page · raw message
tests/qemu-iotests/041 +25 -12
@@ -44,7 +44,8 @@ class TestSingleDrive(iotests.QMPTestCase): def setUp(self): iotests.create_image(backing_img, self.image_len) - qemu_img('create', '-f', iotests.imgfmt, '-o', 'backing_file=%s' % backing_img, test_img) + qemu_img('create', '-f', iotests.imgfmt, + '-o', 'backing_file=%s' % backing_img, '-F', 'raw', test_img) self.vm = iotests.VM().add_drive(test_img, "node-name=top,backing.node-name=base") if iotests.qemu_default_machine == 'pc': self.vm.add_drive(None, 'media=cdrom', 'ide')
@@ -157,7 +158,8 @@ class TestSingleDrive(iotests.QMPTestCase): self.assert_no_active_block_jobs() qemu_img('create', '-f', iotests.imgfmt, '-o', 'cluster_size=%d,backing_file=%s' - % (self.image_len, backing_img), target_img) + % (self.image_len, backing_img), + '-F', 'raw', target_img) result = self.vm.qmp(self.qmp_cmd, device='drive0', sync='full', mode='existing', target=self.qmp_target) self.assert_qmp(result, 'return', {})
@@ -227,7 +229,8 @@ class TestSingleBlockdev(TestSingleDrive): def setUp(self): TestSingleDrive.setUp(self) - qemu_img('create', '-f', iotests.imgfmt, '-o', 'backing_file=%s' % backing_img, target_img) + qemu_img('create', '-f', iotests.imgfmt, + '-o', 'backing_file=%s' % backing_img, '-F', 'raw', target_img) args = {'driver': iotests.imgfmt, 'node-name': self.qmp_target, 'file': { 'filename': target_img, 'driver': 'file' } }
@@ -265,7 +268,8 @@ class TestMirrorNoBacking(iotests.QMPTestCase): def setUp(self): iotests.create_image(backing_img, TestMirrorNoBacking.image_len) - qemu_img('create', '-f', iotests.imgfmt, '-o', 'backing_file=%s' % backing_img, test_img) + qemu_img('create', '-f', iotests.imgfmt, + '-o', 'backing_file=%s' % backing_img, '-F', 'raw', test_img) self.vm = iotests.VM().add_drive(test_img) self.vm.launch()
@@ -282,7 +286,8 @@ class TestMirrorNoBacking(iotests.QMPTestCase): def test_complete(self): self.assert_no_active_block_jobs() - qemu_img('create', '-f', iotests.imgfmt, '-o', 'backing_file=%s' % backing_img, target_img) + qemu_img('create', '-f', iotests.imgfmt, + '-o', 'backing_file=%s' % backing_img, '-F', 'raw', target_img) result = self.vm.qmp('drive-mirror', device='drive0', sync='full', mode='existing', target=target_img) self.assert_qmp(result, 'return', {})
@@ -297,7 +302,8 @@ class TestMirrorNoBacking(iotests.QMPTestCase): def test_cancel(self): self.assert_no_active_block_jobs() - qemu_img('create', '-f', iotests.imgfmt, '-o', 'backing_file=%s' % backing_img, target_img) + qemu_img('create', '-f', iotests.imgfmt, + '-o', 'backing_file=%s' % backing_img, '-F', 'raw', target_img) result = self.vm.qmp('drive-mirror', device='drive0', sync='full', mode='existing', target=target_img) self.assert_qmp(result, 'return', {})
@@ -316,7 +322,8 @@ class TestMirrorNoBacking(iotests.QMPTestCase): qemu_img('create', '-f', iotests.imgfmt, '-o', 'size=%d' %(TestMirrorNoBacking.image_len), target_backing_img) qemu_img('create', '-f', iotests.imgfmt, '-o', 'cluster_size=%d,backing_file=%s' - % (TestMirrorNoBacking.image_len, target_backing_img), target_img) + % (TestMirrorNoBacking.image_len, target_backing_img), + '-F', iotests.imgfmt, target_img) result = self.vm.qmp('drive-mirror', device='drive0', sync='full', mode='existing', target=target_img)
@@ -335,7 +342,8 @@ class TestMirrorResized(iotests.QMPTestCase): def setUp(self): iotests.create_image(backing_img, TestMirrorResized.backing_len) - qemu_img('create', '-f', iotests.imgfmt, '-o', 'backing_file=%s' % backing_img, test_img) + qemu_img('create', '-f', iotests.imgfmt, + '-o', 'backing_file=%s' % backing_img, '-F', 'raw', test_img) qemu_img('resize', test_img, '2M') self.vm = iotests.VM().add_drive(test_img) self.vm.launch()
@@ -481,7 +489,9 @@ new_state = "1" # Test COW into the target image. The first half of the # cluster at MIRROR_GRANULARITY has to be copied from # backing_img, even though sync='top'. - qemu_img('create', '-f', iotests.imgfmt, '-ocluster_size=131072,backing_file=%s' %(backing_img), target_img) + qemu_img('create', '-f', iotests.imgfmt, + '-ocluster_size=131072,backing_file=%s' %(backing_img), + '-F', 'raw', target_img) result = self.vm.qmp('drive-mirror', device='drive0', sync='top', on_source_error='ignore', mode='existing', target=target_img)
@@ -501,7 +511,8 @@ new_state = "1" self.vm.shutdown() # Detach blkdebug to compare images successfully - qemu_img('rebase', '-f', iotests.imgfmt, '-u', '-b', backing_img, test_img) + qemu_img('rebase', '-f', iotests.imgfmt, '-u', '-b', backing_img, + '-F', 'raw', test_img) self.assertTrue(iotests.compare_images(test_img, target_img), 'target image does not match source after mirroring')
@@ -573,7 +584,8 @@ new_state = "1" self.blkdebug_file = target_img + ".blkdebug" iotests.create_image(backing_img, TestWriteErrors.image_len) self.create_blkdebug_file(self.blkdebug_file, "write_aio", 5) - qemu_img('create', '-f', iotests.imgfmt, '-obacking_file=%s' %(backing_img), test_img) + qemu_img('create', '-f', iotests.imgfmt, + '-obacking_file=%s' %(backing_img), '-F', 'raw', test_img) self.vm = iotests.VM().add_drive(test_img) self.target_img = 'blkdebug:%s:%s' % (self.blkdebug_file, target_img) qemu_img('create', '-f', iotests.imgfmt, '-osize=%d' %(TestWriteErrors.image_len), target_img)
@@ -668,7 +680,8 @@ class TestSetSpeed(iotests.QMPTestCase): def setUp(self): qemu_img('create', backing_img, str(TestSetSpeed.image_len)) - qemu_img('create', '-f', iotests.imgfmt, '-o', 'backing_file=%s' % backing_img, test_img) + qemu_img('create', '-f', iotests.imgfmt, + '-o', 'backing_file=%s' % backing_img, '-F', 'raw', test_img) self.vm = iotests.VM().add_drive(test_img) self.vm.launch()
tests/qemu-iotests/042 +2 -2
@@ -64,8 +64,8 @@ _check_test_img echo echo "== Rebasing the image ==" -$QEMU_IMG rebase -u -b "$TEST_IMG.orig" "$TEST_IMG" -$QEMU_IMG rebase -b "$TEST_IMG.orig" "$TEST_IMG" +$QEMU_IMG rebase -u -b "$TEST_IMG.orig" -F $IMGFMT "$TEST_IMG" +$QEMU_IMG rebase -b "$TEST_IMG.orig" -F $IMGFMT "$TEST_IMG" _check_test_img # success, all done
tests/qemu-iotests/043 +9 -9
@@ -46,7 +46,7 @@ _supported_proto file size=128M _make_test_img $size -$QEMU_IMG rebase -u -b "$TEST_IMG" "$TEST_IMG" +$QEMU_IMG rebase -u -b "$TEST_IMG" -F $IMGFMT "$TEST_IMG" echo echo "== backing file references self =="
@@ -54,8 +54,8 @@ _img_info --backing-chain _make_test_img $size mv "$TEST_IMG" "$TEST_IMG.base" -_make_test_img -b "$TEST_IMG.base" $size -$QEMU_IMG rebase -u -b "$TEST_IMG" "$TEST_IMG.base" +_make_test_img -b "$TEST_IMG.base" -F $IMGFMT $size +$QEMU_IMG rebase -u -b "$TEST_IMG" -F $IMGFMT "$TEST_IMG.base" echo echo "== parent references self =="
@@ -63,12 +63,12 @@ _img_info --backing-chain _make_test_img $size mv "$TEST_IMG" "$TEST_IMG.1.base" -_make_test_img -b "$TEST_IMG.1.base" $size +_make_test_img -b "$TEST_IMG.1.base" -F $IMGFMT $size mv "$TEST_IMG" "$TEST_IMG.2.base" -_make_test_img -b "$TEST_IMG.2.base" $size +_make_test_img -b "$TEST_IMG.2.base" -F $IMGFMT $size mv "$TEST_IMG" "$TEST_IMG.3.base" -_make_test_img -b "$TEST_IMG.3.base" $size -$QEMU_IMG rebase -u -b "$TEST_IMG.2.base" "$TEST_IMG.1.base" +_make_test_img -b "$TEST_IMG.3.base" -F $IMGFMT $size +$QEMU_IMG rebase -u -b "$TEST_IMG.2.base" -F $IMGFMT "$TEST_IMG.1.base" echo echo "== ancestor references another ancestor =="
@@ -76,9 +76,9 @@ _img_info --backing-chain _make_test_img $size mv "$TEST_IMG" "$TEST_IMG.1.base" -_make_test_img -b "$TEST_IMG.1.base" $size +_make_test_img -b "$TEST_IMG.1.base" -F $IMGFMT $size mv "$TEST_IMG" "$TEST_IMG.2.base" -_make_test_img -b "$TEST_IMG.2.base" $size +_make_test_img -b "$TEST_IMG.2.base" -F $IMGFMT $size echo echo "== finite chain of length 3 (human) =="
tests/qemu-iotests/043.out +10 -6
@@ -4,20 +4,20 @@ Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 == backing file references self == qemu-img: Backing file 'TEST_DIR/t.IMGFMT' creates an infinite loop. Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT == parent references self == qemu-img: Backing file 'TEST_DIR/t.IMGFMT' creates an infinite loop. Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.1.base -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.2.base -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.3.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.1.base backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.2.base backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.3.base backing_fmt=IMGFMT == ancestor references another ancestor == qemu-img: Backing file 'TEST_DIR/t.IMGFMT.2.base' creates an infinite loop. Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.1.base -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.2.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.1.base backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.2.base backing_fmt=IMGFMT == finite chain of length 3 (human) == image: TEST_DIR/t.IMGFMT
@@ -25,12 +25,14 @@ file format: IMGFMT virtual size: 128 MiB (134217728 bytes) cluster_size: 65536 backing file: TEST_DIR/t.IMGFMT.2.base +backing file format: IMGFMT image: TEST_DIR/t.IMGFMT.2.base file format: IMGFMT virtual size: 128 MiB (134217728 bytes) cluster_size: 65536 backing file: TEST_DIR/t.IMGFMT.1.base +backing file format: IMGFMT image: TEST_DIR/t.IMGFMT.1.base file format: IMGFMT
@@ -40,6 +42,7 @@ cluster_size: 65536 == finite chain of length 3 (json) == [ { + "backing-filename-format": "IMGFMT", "virtual-size": 134217728, "filename": "TEST_DIR/t.IMGFMT", "cluster-size": 65536,
@@ -49,6 +52,7 @@ cluster_size: 65536 "dirty-flag": false }, { + "backing-filename-format": "IMGFMT", "virtual-size": 134217728, "filename": "TEST_DIR/t.IMGFMT.2.base", "cluster-size": 65536,
tests/qemu-iotests/046 +1 -1
@@ -69,7 +69,7 @@ backing_io 0 32 write | $QEMU_IO "$TEST_IMG" | _filter_qemu_io mv "$TEST_IMG" "$TEST_IMG.base" -_make_test_img -b "$TEST_IMG.base" 6G +_make_test_img -b "$TEST_IMG.base" -F $IMGFMT 6G echo echo "== Some concurrent requests touching the same cluster =="
tests/qemu-iotests/046.out +1 -1
@@ -66,7 +66,7 @@ wrote 65536/65536 bytes at offset 1966080 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 65536/65536 bytes at offset 2031616 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=6442450944 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=6442450944 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT == Some concurrent requests touching the same cluster == blkdebug: Suspended request 'A'
tests/qemu-iotests/050 +2 -2
@@ -58,13 +58,13 @@ $QEMU_IO -c "write -P 0x5a 0 1048576" "$TEST_IMG" | _filter_qemu_io TEST_IMG="$TEST_IMG_SAVE" -_make_test_img -b "$TEST_IMG.old" $size +_make_test_img -b "$TEST_IMG.old" -F $IMGFMT $size $QEMU_IO -c "write -z 0 1048576" "$TEST_IMG" | _filter_qemu_io echo echo "== Rebasing the image ==" -$QEMU_IMG rebase -b "$TEST_IMG.new" "$TEST_IMG" +$QEMU_IMG rebase -b "$TEST_IMG.new" -F $IMGFMT "$TEST_IMG" $QEMU_IO -c "read -P 0x00 0 1048576" "$TEST_IMG" | _filter_qemu_io # success, all done
tests/qemu-iotests/050.out +1 -1
@@ -7,7 +7,7 @@ wrote 1048576/1048576 bytes at offset 0 Formatting 'TEST_DIR/t.IMGFMT.new', fmt=IMGFMT size=10485760 wrote 1048576/1048576 bytes at offset 0 1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=10485760 backing_file=TEST_DIR/t.IMGFMT.old +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=10485760 backing_file=TEST_DIR/t.IMGFMT.old backing_fmt=IMGFMT wrote 1048576/1048576 bytes at offset 0 1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
tests/qemu-iotests/051 +1 -1
@@ -70,7 +70,7 @@ device_id="drive0" _make_test_img $size cp "$TEST_IMG" "$TEST_IMG.orig" mv "$TEST_IMG" "$TEST_IMG.base" -_make_test_img -b "$TEST_IMG.base" $size +_make_test_img -b "$TEST_IMG.base" -F $IMGFMT $size echo echo === Unknown option ===
tests/qemu-iotests/051.out +1 -1
@@ -1,6 +1,6 @@ QA output created by 051 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT === Unknown option ===
tests/qemu-iotests/051.pc.out +1 -1
@@ -1,6 +1,6 @@ QA output created by 051 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT === Unknown option ===
tests/qemu-iotests/056 +2 -1
@@ -54,7 +54,8 @@ class TestSyncModesNoneAndTop(iotests.QMPTestCase): def setUp(self): create_image(backing_img, TestSyncModesNoneAndTop.image_len) - qemu_img('create', '-f', iotests.imgfmt, '-o', 'backing_file=%s' % backing_img, test_img) + qemu_img('create', '-f', iotests.imgfmt, + '-o', 'backing_file=%s' % backing_img, '-F', 'raw', test_img) qemu_io('-c', 'write -P0x41 0 512', test_img) qemu_io('-c', 'write -P0xd5 1M 32k', test_img) qemu_io('-c', 'write -P0xdc 32M 124k', test_img)
tests/qemu-iotests/060 +1 -1
@@ -163,7 +163,7 @@ $QEMU_IO -c 'write 0k 64k' "$BACKING_IMG" | _filter_qemu_io # compat=0.10 is required in order to make the following discard actually # unallocate the sector rather than make it a zero sector - we want COW, after # all. -_make_test_img -o 'compat=0.10' -b "$BACKING_IMG" 1G +_make_test_img -o 'compat=0.10' -b "$BACKING_IMG" -F $IMGFMT 1G # Write two clusters, the second one enforces creation of an L2 table after # the first data cluster. $QEMU_IO -c 'write 0k 64k' -c 'write 512M 64k' "$TEST_IMG" | _filter_qemu_io
tests/qemu-iotests/060.out +1 -1
@@ -100,7 +100,7 @@ read 512/512 bytes at offset 0 Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=1073741824 wrote 65536/65536 bytes at offset 0 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT wrote 65536/65536 bytes at offset 0 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 65536/65536 bytes at offset 536870912
tests/qemu-iotests/061 +5 -5
@@ -187,7 +187,7 @@ echo "=== Testing zero expansion on backed image ===" echo TEST_IMG="$TEST_IMG.base" _make_test_img -o "compat=1.1" 64M $QEMU_IO -c "write -P 0x2a 0 128k" "$TEST_IMG.base" | _filter_qemu_io -_make_test_img -o "compat=1.1" -b "$TEST_IMG.base" 64M +_make_test_img -o "compat=1.1" -b "$TEST_IMG.base" -F $IMGFMT 64M $QEMU_IO -c "read -P 0x2a 0 128k" -c "write -z 0 64k" "$TEST_IMG" | _filter_qemu_io $QEMU_IMG amend -o "compat=0.10" "$TEST_IMG" _check_test_img
@@ -198,7 +198,7 @@ echo "=== Testing zero expansion on backed inactive clusters ===" echo TEST_IMG="$TEST_IMG.base" _make_test_img -o "compat=1.1" 64M $QEMU_IO -c "write -P 0x2a 0 128k" "$TEST_IMG.base" | _filter_qemu_io -_make_test_img -o "compat=1.1" -b "$TEST_IMG.base" 64M +_make_test_img -o "compat=1.1" -b "$TEST_IMG.base" -F $IMGFMT 64M $QEMU_IO -c "write -z 0 64k" "$TEST_IMG" | _filter_qemu_io $QEMU_IMG snapshot -c foo "$TEST_IMG" $QEMU_IO -c "write -P 0x42 0 128k" "$TEST_IMG" | _filter_qemu_io
@@ -214,7 +214,7 @@ echo "=== Testing zero expansion on backed image with shared L2 table ===" echo TEST_IMG="$TEST_IMG.base" _make_test_img -o "compat=1.1" 64M $QEMU_IO -c "write -P 0x2a 0 128k" "$TEST_IMG.base" | _filter_qemu_io -_make_test_img -o "compat=1.1" -b "$TEST_IMG.base" 64M +_make_test_img -o "compat=1.1" -b "$TEST_IMG.base" -F $IMGFMT 64M $QEMU_IO -c "write -z 0 128k" "$TEST_IMG" | _filter_qemu_io $QEMU_IMG snapshot -c foo "$TEST_IMG" $QEMU_IMG amend -o "compat=0.10" "$TEST_IMG"
@@ -237,7 +237,7 @@ echo echo "=== Testing progress report without snapshot ===" echo TEST_IMG="$TEST_IMG.base" _make_test_img -o "compat=1.1" 4G -_make_test_img -o "compat=1.1" -b "$TEST_IMG.base" 4G +_make_test_img -o "compat=1.1" -b "$TEST_IMG.base" -F $IMGFMT 4G $QEMU_IO -c "write -z 0 64k" \ -c "write -z 1G 64k" \ -c "write -z 2G 64k" \
@@ -249,7 +249,7 @@ echo echo "=== Testing progress report with snapshot ===" echo TEST_IMG="$TEST_IMG.base" _make_test_img -o "compat=1.1" 4G -_make_test_img -o "compat=1.1" -b "$TEST_IMG.base" 4G +_make_test_img -o "compat=1.1" -b "$TEST_IMG.base" -F $IMGFMT 4G $QEMU_IO -c "write -z 0 64k" \ -c "write -z 1G 64k" \ -c "write -z 2G 64k" \
tests/qemu-iotests/061.out +5 -5
@@ -395,7 +395,7 @@ read 131072/131072 bytes at offset 0 Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864 wrote 131072/131072 bytes at offset 0 128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT read 131072/131072 bytes at offset 0 128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 65536/65536 bytes at offset 0
@@ -411,7 +411,7 @@ read 65536/65536 bytes at offset 65536 Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864 wrote 131072/131072 bytes at offset 0 128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT wrote 65536/65536 bytes at offset 0 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 131072/131072 bytes at offset 0
@@ -430,7 +430,7 @@ read 65536/65536 bytes at offset 65536 Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864 wrote 131072/131072 bytes at offset 0 128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT wrote 131072/131072 bytes at offset 0 128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) No errors were found on the image.
@@ -454,7 +454,7 @@ read 67108864/67108864 bytes at offset 0 === Testing progress report without snapshot === Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=4294967296 -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=4294967296 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=4294967296 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT wrote 65536/65536 bytes at offset 0 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 65536/65536 bytes at offset 1073741824
@@ -469,7 +469,7 @@ No errors were found on the image. === Testing progress report with snapshot === Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=4294967296 -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=4294967296 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=4294967296 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT wrote 65536/65536 bytes at offset 0 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 65536/65536 bytes at offset 1073741824
tests/qemu-iotests/069 +1 -1
@@ -46,7 +46,7 @@ echo echo "=== Creating an image with a backing file and deleting that file ===" echo TEST_IMG="$TEST_IMG.base" _make_test_img $IMG_SIZE -_make_test_img -b "$TEST_IMG.base" $IMG_SIZE +_make_test_img -b "$TEST_IMG.base" -F $IMGFMT $IMG_SIZE _rm_test_img "$TEST_IMG.base" # Just open the image and close it right again (this should print an error message) $QEMU_IO -c quit "$TEST_IMG" 2>&1 | _filter_testdir | _filter_imgfmt
tests/qemu-iotests/069.out +1 -1
@@ -3,6 +3,6 @@ QA output created by 069 === Creating an image with a backing file and deleting that file === Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=131072 -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=131072 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=131072 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT qemu-io: can't open device TEST_DIR/t.IMGFMT: Could not open backing file: Could not open 'TEST_DIR/t.IMGFMT.base': No such file or directory *** done
tests/qemu-iotests/073 +1 -1
@@ -52,7 +52,7 @@ echo "== creating backing file ==" TEST_IMG="$TEST_IMG.base" _make_test_img $size -_make_test_img -b "$TEST_IMG.base" +_make_test_img -b "$TEST_IMG.base" -F $IMGFMT $QEMU_IO -c "write -P 0xa5 0 $size" "$TEST_IMG.base" | _filter_qemu_io echo
tests/qemu-iotests/073.out +1 -1
@@ -2,7 +2,7 @@ QA output created by 073 == creating backing file == Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=134217728 -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT wrote 134217728/134217728 bytes at offset 0 128 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
tests/qemu-iotests/082 +10 -6
@@ -83,8 +83,10 @@ run_qemu_img create -f $IMGFMT -o cluster_size=4k -o help "$TEST_IMG" $size run_qemu_img create -f $IMGFMT -o cluster_size=4k -o \? "$TEST_IMG" $size # Looks like a help option, but is part of the backing file name -run_qemu_img create -f $IMGFMT -u -o backing_file="$TEST_IMG",,help "$TEST_IMG" $size -run_qemu_img create -f $IMGFMT -u -o backing_file="$TEST_IMG",,\? "$TEST_IMG" $size +run_qemu_img create -f $IMGFMT -u -o backing_file="$TEST_IMG",,help \ + -F $IMGFMT "$TEST_IMG" $size +run_qemu_img create -f $IMGFMT -u -o backing_file="$TEST_IMG",,\? \ + -F $IMGFMT "$TEST_IMG" $size # Try to trick qemu-img into creating escaped commas run_qemu_img create -f $IMGFMT -o backing_file="$TEST_IMG", -o help "$TEST_IMG" $size
@@ -140,8 +142,8 @@ run_qemu_img convert -O $IMGFMT -o cluster_size=4k -o help "$TEST_IMG" "$TEST_IM run_qemu_img convert -O $IMGFMT -o cluster_size=4k -o \? "$TEST_IMG" "$TEST_IMG".base # Looks like a help option, but is part of the backing file name -run_qemu_img convert -O $IMGFMT -o backing_file="$TEST_IMG",,help "$TEST_IMG" "$TEST_IMG".base -run_qemu_img convert -O $IMGFMT -o backing_file="$TEST_IMG",,\? "$TEST_IMG" "$TEST_IMG".base +run_qemu_img convert -O $IMGFMT -o backing_fmt=$IMGFMT,backing_file="$TEST_IMG",,help "$TEST_IMG" "$TEST_IMG".base +run_qemu_img convert -O $IMGFMT -o backing_fmt=$IMGFMT,backing_file="$TEST_IMG",,\? "$TEST_IMG" "$TEST_IMG".base # Try to trick qemu-img into creating escaped commas run_qemu_img convert -O $IMGFMT -o backing_file="$TEST_IMG", -o help "$TEST_IMG" "$TEST_IMG".base
@@ -199,10 +201,12 @@ run_qemu_img amend -f $IMGFMT -o cluster_size=4k -o help "$TEST_IMG" run_qemu_img amend -f $IMGFMT -o cluster_size=4k -o \? "$TEST_IMG" # Looks like a help option, but is part of the backing file name -run_qemu_img amend -f $IMGFMT -o backing_file="$TEST_IMG",,help "$TEST_IMG" +run_qemu_img amend -f $IMGFMT \ + -o backing_fmt=$IMGFMT,backing_file="$TEST_IMG",,help "$TEST_IMG" run_qemu_img rebase -u -b "" -f $IMGFMT "$TEST_IMG" -run_qemu_img amend -f $IMGFMT -o backing_file="$TEST_IMG",,\? "$TEST_IMG" +run_qemu_img amend -f $IMGFMT \ + -o backing_fmt=$IMGFMT,backing_file="$TEST_IMG",,\? "$TEST_IMG" run_qemu_img rebase -u -b "" -f $IMGFMT "$TEST_IMG" # Try to trick qemu-img into creating escaped commas
tests/qemu-iotests/082.out +8 -8
@@ -226,11 +226,11 @@ Supported options: refcount_bits=<num> - Width of a reference count entry in bits size=<size> - Virtual disk size -Testing: create -f qcow2 -u -o backing_file=TEST_DIR/t.qcow2,,help TEST_DIR/t.qcow2 128M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/t.qcow2,,help cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Testing: create -f qcow2 -u -o backing_file=TEST_DIR/t.qcow2,,help -F qcow2 TEST_DIR/t.qcow2 128M +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/t.qcow2,,help backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 -Testing: create -f qcow2 -u -o backing_file=TEST_DIR/t.qcow2,,? TEST_DIR/t.qcow2 128M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/t.qcow2,,? cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Testing: create -f qcow2 -u -o backing_file=TEST_DIR/t.qcow2,,? -F qcow2 TEST_DIR/t.qcow2 128M +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/t.qcow2,,? backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 Testing: create -f qcow2 -o backing_file=TEST_DIR/t.qcow2, -o help TEST_DIR/t.qcow2 128M qemu-img: Invalid option list: backing_file=TEST_DIR/t.qcow2,
@@ -506,10 +506,10 @@ Supported options: refcount_bits=<num> - Width of a reference count entry in bits size=<size> - Virtual disk size -Testing: convert -O qcow2 -o backing_file=TEST_DIR/t.qcow2,,help TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base +Testing: convert -O qcow2 -o backing_fmt=qcow2,backing_file=TEST_DIR/t.qcow2,,help TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base qemu-img: Could not open 'TEST_DIR/t.qcow2.base': Could not open backing file: Could not open 'TEST_DIR/t.qcow2,help': No such file or directory -Testing: convert -O qcow2 -o backing_file=TEST_DIR/t.qcow2,,? TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base +Testing: convert -O qcow2 -o backing_fmt=qcow2,backing_file=TEST_DIR/t.qcow2,,? TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base qemu-img: Could not open 'TEST_DIR/t.qcow2.base': Could not open backing file: Could not open 'TEST_DIR/t.qcow2,?': No such file or directory Testing: convert -O qcow2 -o backing_file=TEST_DIR/t.qcow2, -o help TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
@@ -805,11 +805,11 @@ Creation options for 'qcow2': Note that not all of these options may be amendable. -Testing: amend -f qcow2 -o backing_file=TEST_DIR/t.qcow2,,help TEST_DIR/t.qcow2 +Testing: amend -f qcow2 -o backing_fmt=qcow2,backing_file=TEST_DIR/t.qcow2,,help TEST_DIR/t.qcow2 Testing: rebase -u -b -f qcow2 TEST_DIR/t.qcow2 -Testing: amend -f qcow2 -o backing_file=TEST_DIR/t.qcow2,,? TEST_DIR/t.qcow2 +Testing: amend -f qcow2 -o backing_fmt=qcow2,backing_file=TEST_DIR/t.qcow2,,? TEST_DIR/t.qcow2 Testing: rebase -u -b -f qcow2 TEST_DIR/t.qcow2
tests/qemu-iotests/085 +2 -2
@@ -105,7 +105,7 @@ add_snapshot_image() { base_image="${TEST_DIR}/$((${1}-1))-${snapshot_virt0}" snapshot_file="${TEST_DIR}/${1}-${snapshot_virt0}" - TEST_IMG=$snapshot_file _make_test_img -u -b "${base_image}" "$size" + TEST_IMG=$snapshot_file _make_test_img -u -b "${base_image}" -F $IMGFMT "$size" do_blockdev_add "$1" "'backing': null, " "${snapshot_file}" }
@@ -224,7 +224,7 @@ echo SNAPSHOTS=$((${SNAPSHOTS}+1)) TEST_IMG="$TEST_IMG.base" _make_test_img "$size" -_make_test_img -b "${TEST_IMG}.base" "$size" +_make_test_img -b "${TEST_IMG}.base" -F $IMGFMT "$size" do_blockdev_add ${SNAPSHOTS} "" "${TEST_IMG}" blockdev_snapshot ${SNAPSHOTS} error
tests/qemu-iotests/085.out +3 -3
@@ -68,12 +68,12 @@ Formatting 'TEST_DIR/10-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_fil === Create a couple of snapshots using blockdev-snapshot === -Formatting 'TEST_DIR/11-snapshot-v0.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/10-snapshot-v0.IMGFMT +Formatting 'TEST_DIR/11-snapshot-v0.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/10-snapshot-v0.IMGFMT backing_fmt=IMGFMT { 'execute': 'blockdev-add', 'arguments': { 'driver': 'IMGFMT', 'node-name': 'snap_11', 'backing': null, 'file': { 'driver': 'file', 'filename': 'TEST_DIR/11-snapshot-v0.IMGFMT', 'node-name': 'file_11' } } } {"return": {}} { 'execute': 'blockdev-snapshot', 'arguments': { 'node': 'virtio0', 'overlay':'snap_11' } } {"return": {}} -Formatting 'TEST_DIR/12-snapshot-v0.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/11-snapshot-v0.IMGFMT +Formatting 'TEST_DIR/12-snapshot-v0.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/11-snapshot-v0.IMGFMT backing_fmt=IMGFMT { 'execute': 'blockdev-add', 'arguments': { 'driver': 'IMGFMT', 'node-name': 'snap_12', 'backing': null, 'file': { 'driver': 'file', 'filename': 'TEST_DIR/12-snapshot-v0.IMGFMT', 'node-name': 'file_12' } } } {"return": {}} { 'execute': 'blockdev-snapshot', 'arguments': { 'node': 'virtio0', 'overlay':'snap_12' } }
@@ -101,7 +101,7 @@ Formatting 'TEST_DIR/12-snapshot-v0.IMGFMT', fmt=IMGFMT size=134217728 backing_f === Invalid command - snapshot node has a backing image === Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=134217728 -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT { 'execute': 'blockdev-add', 'arguments': { 'driver': 'IMGFMT', 'node-name': 'snap_13', 'file': { 'driver': 'file', 'filename': 'TEST_DIR/t.IMGFMT', 'node-name': 'file_13' } } } {"return": {}} { 'execute': 'blockdev-snapshot', 'arguments': { 'node': 'virtio0', 'overlay':'snap_13' } }
tests/qemu-iotests/089 +1 -1
@@ -84,7 +84,7 @@ echo echo "=== Testing correct handling of 'backing':null ===" echo -_make_test_img -b "$TEST_IMG.base" $IMG_SIZE +_make_test_img -b "$TEST_IMG.base" -F $IMGFMT $IMG_SIZE # This should read 42 $QEMU_IO -c 'read -P 42 0 512' "$TEST_IMG" | _filter_qemu_io
tests/qemu-iotests/089.out +1 -1
@@ -21,7 +21,7 @@ read 512/512 bytes at offset 0 === Testing correct handling of 'backing':null === -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT read 512/512 bytes at offset 0 512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) read 512/512 bytes at offset 0
tests/qemu-iotests/095 +2 -2
@@ -51,9 +51,9 @@ size_larger=100M TEST_IMG="$TEST_IMG.base" _make_test_img $size_smaller -TEST_IMG="$TEST_IMG.snp1" _make_test_img -b "$TEST_IMG.base" $size_larger +TEST_IMG="$TEST_IMG.snp1" _make_test_img -b "$TEST_IMG.base" -F $IMGFMT $size_larger -_make_test_img -b "${TEST_IMG}.snp1" $size_larger +_make_test_img -b "${TEST_IMG}.snp1" -F $IMGFMT $size_larger echo echo "=== Base image info before commit and resize ==="
tests/qemu-iotests/095.out +2 -2
@@ -1,7 +1,7 @@ QA output created by 095 Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=5242880 -Formatting 'TEST_DIR/t.IMGFMT.snp1', fmt=IMGFMT size=104857600 backing_file=TEST_DIR/t.IMGFMT.base -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=104857600 backing_file=TEST_DIR/t.IMGFMT.snp1 +Formatting 'TEST_DIR/t.IMGFMT.snp1', fmt=IMGFMT size=104857600 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=104857600 backing_file=TEST_DIR/t.IMGFMT.snp1 backing_fmt=IMGFMT === Base image info before commit and resize === image: TEST_DIR/t.IMGFMT.base
tests/qemu-iotests/097 +2 -2
@@ -67,8 +67,8 @@ echo len=$((2100 * 1024 * 1024 + 512)) # larger than 2G, and not cluster aligned TEST_IMG="$TEST_IMG.base" _make_test_img $len -TEST_IMG="$TEST_IMG.itmd" _make_test_img -b "$TEST_IMG.base" $len -_make_test_img -b "$TEST_IMG.itmd" $len +TEST_IMG="$TEST_IMG.itmd" _make_test_img -b "$TEST_IMG.base" -F $IMGFMT $len +_make_test_img -b "$TEST_IMG.itmd" -F $IMGFMT $len $QEMU_IO -c "write -P 1 0x7ffd0000 192k" "$TEST_IMG.base" | _filter_qemu_io $QEMU_IO -c "write -P 2 0x7ffe0000 128k" "$TEST_IMG.itmd" | _filter_qemu_io
tests/qemu-iotests/097.out +8 -8
@@ -3,8 +3,8 @@ QA output created by 097 === Test pass 0 === Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=2202010112 -Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.base -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.itmd +Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.itmd backing_fmt=IMGFMT wrote 196608/196608 bytes at offset 2147287040 192 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 131072/131072 bytes at offset 2147352576
@@ -40,8 +40,8 @@ Offset Length File === Test pass 1 === Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=2202010112 -Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.base -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.itmd +Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.itmd backing_fmt=IMGFMT wrote 196608/196608 bytes at offset 2147287040 192 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 131072/131072 bytes at offset 2147352576
@@ -78,8 +78,8 @@ Offset Length File === Test pass 2 === Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=2202010112 -Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.base -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.itmd +Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.itmd backing_fmt=IMGFMT wrote 196608/196608 bytes at offset 2147287040 192 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 131072/131072 bytes at offset 2147352576
@@ -116,8 +116,8 @@ Offset Length File === Test pass 3 === Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=2202010112 -Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.base -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.itmd +Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.itmd backing_fmt=IMGFMT wrote 196608/196608 bytes at offset 2147287040 192 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 131072/131072 bytes at offset 2147352576
tests/qemu-iotests/098 +1 -1
@@ -52,7 +52,7 @@ echo "=== $event ===" echo TEST_IMG="$TEST_IMG.base" _make_test_img 64M -_make_test_img -b "$TEST_IMG.base" 64M +_make_test_img -b "$TEST_IMG.base" -F $IMGFMT 64M # Some data that can be leaked when emptying the top image $QEMU_IO -c 'write 0 64k' "$TEST_IMG" | _filter_qemu_io
tests/qemu-iotests/098.out +4 -4
@@ -3,7 +3,7 @@ QA output created by 098 === l1_update === Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864 -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT wrote 65536/65536 bytes at offset 0 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) qemu-img: Could not empty blkdebug:TEST_DIR/blkdebug.conf:TEST_DIR/t.IMGFMT: Input/output error
@@ -12,7 +12,7 @@ No errors were found on the image. === empty_image_prepare === Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864 -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT wrote 65536/65536 bytes at offset 0 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) qemu-img: Could not empty blkdebug:TEST_DIR/blkdebug.conf:TEST_DIR/t.IMGFMT: Input/output error
@@ -25,7 +25,7 @@ No errors were found on the image. === reftable_update === Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864 -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT wrote 65536/65536 bytes at offset 0 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) qemu-img: Could not empty blkdebug:TEST_DIR/blkdebug.conf:TEST_DIR/t.IMGFMT: Input/output error
@@ -39,7 +39,7 @@ No errors were found on the image. === refblock_alloc === Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864 -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT wrote 65536/65536 bytes at offset 0 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) qemu-img: Could not empty blkdebug:TEST_DIR/blkdebug.conf:TEST_DIR/t.IMGFMT: Input/output error
tests/qemu-iotests/110 +2 -2
@@ -50,7 +50,7 @@ echo '=== Reconstructable filename ===' echo TEST_IMG="$TEST_IMG.base" _make_test_img 64M -_make_test_img -b "$TEST_IMG_REL.base" 64M +_make_test_img -b "$TEST_IMG_REL.base" -F $IMGFMT 64M # qemu should be able to reconstruct the filename, so relative backing names # should work # (We have to filter the backing file format because vmdk always
@@ -91,7 +91,7 @@ echo '=== Backing name is always relative to the backed image ===' echo # omit the image size; it should work anyway -_make_test_img -b "$TEST_IMG_REL.base" +_make_test_img -b "$TEST_IMG_REL.base" -F $IMGFMT echo echo '=== Nodes without a common directory ==='
tests/qemu-iotests/110.out +2 -2
@@ -3,7 +3,7 @@ QA output created by 110 === Reconstructable filename === Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864 -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=t.IMGFMT.base backing_fmt=IMGFMT image: TEST_DIR/t.IMGFMT file format: IMGFMT virtual size: 64 MiB (67108864 bytes)
@@ -18,7 +18,7 @@ backing file: t.IMGFMT.base (actual path: TEST_DIR/t.IMGFMT.base) === Backing name is always relative to the backed image === -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=t.IMGFMT.base backing_fmt=IMGFMT === Nodes without a common directory ===
tests/qemu-iotests/122 +16 -11
@@ -52,9 +52,10 @@ echo echo "=== Check allocation status regression with -B ===" echo -_make_test_img -b "$TEST_IMG".base +_make_test_img -b "$TEST_IMG".base -F $IMGFMT $QEMU_IO -c "write -P 0x22 0 3M" "$TEST_IMG" 2>&1 | _filter_qemu_io | _filter_testdir -$QEMU_IMG convert -O $IMGFMT -B "$TEST_IMG".base "$TEST_IMG" "$TEST_IMG".orig +$QEMU_IMG convert -O $IMGFMT -B "$TEST_IMG".base \ + -o backing_fmt=$IMGFMT "$TEST_IMG" "$TEST_IMG".orig $QEMU_IMG map "$TEST_IMG".orig | _filter_qemu_img_map
@@ -62,18 +63,22 @@ echo echo "=== Check that zero clusters are kept in overlay ===" echo -_make_test_img -b "$TEST_IMG".base +_make_test_img -b "$TEST_IMG".base -F $IMGFMT $QEMU_IO -c "write -P 0 0 3M" "$TEST_IMG" 2>&1 | _filter_qemu_io | _filter_testdir -$QEMU_IMG convert -O $IMGFMT -B "$TEST_IMG".base "$TEST_IMG" "$TEST_IMG".orig +$QEMU_IMG convert -O $IMGFMT -B "$TEST_IMG".base -o backing_fmt=$IMGFMT \ + "$TEST_IMG" "$TEST_IMG".orig $QEMU_IO -c "read -P 0 0 3M" "$TEST_IMG".orig 2>&1 | _filter_qemu_io | _filter_testdir -$QEMU_IMG convert -O $IMGFMT -c -B "$TEST_IMG".base "$TEST_IMG" "$TEST_IMG".orig +$QEMU_IMG convert -O $IMGFMT -c -B "$TEST_IMG".base -o backing_fmt=$IMGFMT \ + "$TEST_IMG" "$TEST_IMG".orig $QEMU_IO -c "read -P 0 0 3M" "$TEST_IMG".orig 2>&1 | _filter_qemu_io | _filter_testdir $QEMU_IO -c "write -z 0 3M" "$TEST_IMG" 2>&1 | _filter_qemu_io | _filter_testdir -$QEMU_IMG convert -O $IMGFMT -B "$TEST_IMG".base "$TEST_IMG" "$TEST_IMG".orig +$QEMU_IMG convert -O $IMGFMT -B "$TEST_IMG".base -o backing_fmt=$IMGFMT \ + "$TEST_IMG" "$TEST_IMG".orig $QEMU_IO -c "read -P 0 0 3M" "$TEST_IMG".orig 2>&1 | _filter_qemu_io | _filter_testdir -$QEMU_IMG convert -O $IMGFMT -c -B "$TEST_IMG".base "$TEST_IMG" "$TEST_IMG".orig +$QEMU_IMG convert -O $IMGFMT -c -B "$TEST_IMG".base -o backing_fmt=$IMGFMT \ + "$TEST_IMG" "$TEST_IMG".orig $QEMU_IO -c "read -P 0 0 3M" "$TEST_IMG".orig 2>&1 | _filter_qemu_io | _filter_testdir
@@ -94,11 +99,11 @@ TEST_IMG="$TEST_IMG".base _make_test_img 256M # We do not want such a zero write, however, because we are past the # end of the backing file on the target as well, so we do not need to # write anything there. -_make_test_img -b "$TEST_IMG".base 768M +_make_test_img -b "$TEST_IMG".base 768M -F $IMGFMT # Use compat=0.10 as the output so there is no zero cluster support $QEMU_IMG convert -O $IMGFMT -B "$TEST_IMG".base -o compat=0.10 \ - "$TEST_IMG" "$TEST_IMG".orig + -o backing_fmt=$IMGFMT "$TEST_IMG" "$TEST_IMG".orig # See that nothing has been allocated past 64M $QEMU_IMG map "$TEST_IMG".orig | _filter_qemu_img_map
@@ -110,7 +115,7 @@ $QEMU_IO -c 'write -P 0x11 255M 1M' "$TEST_IMG".base 2>&1 | _filter_qemu_io $QEMU_IO -c 'write -P 0x22 600M 1M' "$TEST_IMG" 2>&1 | _filter_qemu_io $QEMU_IMG convert -O $IMGFMT -B "$TEST_IMG".base -o compat=0.10 \ - "$TEST_IMG" "$TEST_IMG".orig + -o backing_fmt=$IMGFMT "$TEST_IMG" "$TEST_IMG".orig $QEMU_IMG map "$TEST_IMG".orig | _filter_qemu_img_map $QEMU_IO -c 'read -P 0x11 255M 1M' \
@@ -199,7 +204,7 @@ $QEMU_IMG map --output=json "$TEST_IMG".orig | _filter_qemu_img_map TEST_IMG="$TEST_IMG".base _make_test_img 64M $QEMU_IO -c "write -P 0x11 0 32M" "$TEST_IMG".base 2>&1 | _filter_qemu_io | _filter_testdir -_make_test_img -b "$TEST_IMG".base 64M +_make_test_img -b "$TEST_IMG".base 64M -F $IMGFMT $QEMU_IO -c "write -P 0x22 0 3M" "$TEST_IMG" 2>&1 | _filter_qemu_io | _filter_testdir echo
tests/qemu-iotests/122.out +4 -4
@@ -5,7 +5,7 @@ wrote 67108864/67108864 bytes at offset 0 === Check allocation status regression with -B === -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT wrote 3145728/3145728 bytes at offset 0 3 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) Offset Length File
@@ -14,7 +14,7 @@ Offset Length File === Check that zero clusters are kept in overlay === -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT wrote 3145728/3145728 bytes at offset 0 3 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) read 3145728/3145728 bytes at offset 0
@@ -31,7 +31,7 @@ read 3145728/3145728 bytes at offset 0 === Converting to an overlay larger than its backing file === Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=268435456 -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=805306368 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=805306368 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT Offset Length File wrote 1048576/1048576 bytes at offset 267386880
@@ -141,7 +141,7 @@ read 63963136/63963136 bytes at offset 3145728 Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864 wrote 33554432/33554432 bytes at offset 0 32 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT wrote 3145728/3145728 bytes at offset 0 3 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
tests/qemu-iotests/126 +2 -2
@@ -61,7 +61,7 @@ BASE_IMG="$TEST_DIR/image:base.$IMGFMT" TOP_IMG="$TEST_DIR/image:top.$IMGFMT" TEST_IMG=$BASE_IMG _make_test_img 64M -TEST_IMG=$TOP_IMG _make_test_img -b ./image:base.$IMGFMT +TEST_IMG=$TOP_IMG _make_test_img -b ./image:base.$IMGFMT -F $IMGFMT # (1) The default cluster size depends on the image format # (2) vmdk only supports vmdk backing files, so it always reports the
@@ -82,7 +82,7 @@ BASE_IMG="base.$IMGFMT" TOP_IMG="file:image:top.$IMGFMT" TEST_IMG=$BASE_IMG _make_test_img 64M -TEST_IMG=$TOP_IMG _make_test_img -b "$BASE_IMG" +TEST_IMG=$TOP_IMG _make_test_img -b "$BASE_IMG" -F $IMGFMT TEST_IMG=$TOP_IMG _img_info | grep -ve 'cluster_size' -e 'backing file format'
tests/qemu-iotests/126.out +2 -2
@@ -8,14 +8,14 @@ Formatting 'file:TEST_DIR/a:b.IMGFMT', fmt=IMGFMT size=67108864 === Testing relative backing filename resolution === Formatting 'TEST_DIR/image:base.IMGFMT', fmt=IMGFMT size=67108864 -Formatting 'TEST_DIR/image:top.IMGFMT', fmt=IMGFMT size=67108864 backing_file=./image:base.IMGFMT +Formatting 'TEST_DIR/image:top.IMGFMT', fmt=IMGFMT size=67108864 backing_file=./image:base.IMGFMT backing_fmt=IMGFMT image: TEST_DIR/image:top.IMGFMT file format: IMGFMT virtual size: 64 MiB (67108864 bytes) backing file: ./image:base.IMGFMT (actual path: TEST_DIR/./image:base.IMGFMT) Formatting 'base.IMGFMT', fmt=IMGFMT size=67108864 -Formatting 'file:image:top.IMGFMT', fmt=IMGFMT size=67108864 backing_file=base.IMGFMT +Formatting 'file:image:top.IMGFMT', fmt=IMGFMT size=67108864 backing_file=base.IMGFMT backing_fmt=IMGFMT image: ./image:top.IMGFMT file format: IMGFMT virtual size: 64 MiB (67108864 bytes)
tests/qemu-iotests/127 +2 -2
@@ -48,8 +48,8 @@ _require_devices virtio-scsi scsi-hd IMG_SIZE=64K _make_test_img $IMG_SIZE -TEST_IMG="$TEST_IMG.overlay0" _make_test_img -b "$TEST_IMG" $IMG_SIZE -TEST_IMG="$TEST_IMG.overlay1" _make_test_img -b "$TEST_IMG" $IMG_SIZE +TEST_IMG="$TEST_IMG.overlay0" _make_test_img -b "$TEST_IMG" -F $IMGFMT $IMG_SIZE +TEST_IMG="$TEST_IMG.overlay1" _make_test_img -b "$TEST_IMG" -F $IMGFMT $IMG_SIZE # So that we actually have something to mirror and the job does not return # immediately (which may be bad because then we cannot know whether the
tests/qemu-iotests/127.out +2 -2
@@ -1,7 +1,7 @@ QA output created by 127 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=65536 -Formatting 'TEST_DIR/t.IMGFMT.overlay0', fmt=IMGFMT size=65536 backing_file=TEST_DIR/t.IMGFMT -Formatting 'TEST_DIR/t.IMGFMT.overlay1', fmt=IMGFMT size=65536 backing_file=TEST_DIR/t.IMGFMT +Formatting 'TEST_DIR/t.IMGFMT.overlay0', fmt=IMGFMT size=65536 backing_file=TEST_DIR/t.IMGFMT backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT.overlay1', fmt=IMGFMT size=65536 backing_file=TEST_DIR/t.IMGFMT backing_fmt=IMGFMT wrote 42/42 bytes at offset 0 42 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) { 'execute': 'qmp_capabilities' }
tests/qemu-iotests/129 +2 -1
@@ -29,7 +29,8 @@ class TestStopWithBlockJob(iotests.QMPTestCase): def setUp(self): iotests.qemu_img('create', '-f', iotests.imgfmt, self.base_img, "1G") - iotests.qemu_img('create', '-f', iotests.imgfmt, self.test_img, "-b", self.base_img) + iotests.qemu_img('create', '-f', iotests.imgfmt, self.test_img, + "-b", self.base_img, '-F', iotests.imgfmt) iotests.qemu_io('-f', iotests.imgfmt, '-c', 'write -P0x5d 1M 128M', self.test_img) self.vm = iotests.VM().add_drive(self.test_img) self.vm.launch()
tests/qemu-iotests/133 +1 -1
@@ -40,7 +40,7 @@ _supported_fmt qcow2 _supported_proto file TEST_IMG="$TEST_IMG.base" _make_test_img 64M -_make_test_img -b "$TEST_IMG.base" +_make_test_img -b "$TEST_IMG.base" -F $IMGFMT echo echo "=== Check that node-name can't be changed ==="
tests/qemu-iotests/133.out +1 -1
@@ -1,6 +1,6 @@ QA output created by 133 Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864 -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT === Check that node-name can't be changed ===
tests/qemu-iotests/139 +1 -1
@@ -71,7 +71,7 @@ class TestBlockdevDel(iotests.QMPTestCase): def addBlockDriverStateOverlay(self, node): self.checkBlockDriverState(node, False) iotests.qemu_img('create', '-u', '-f', iotests.imgfmt, - '-b', base_img, new_img, '1M') + '-b', base_img, '-F', iotests.imgfmt, new_img, '1M') opts = {'driver': iotests.imgfmt, 'node-name': node, 'backing': None,
tests/qemu-iotests/141 +2 -2
@@ -89,8 +89,8 @@ test_blockjob() TEST_IMG="$TEST_DIR/b.$IMGFMT" _make_test_img 1M -TEST_IMG="$TEST_DIR/m.$IMGFMT" _make_test_img -b "$TEST_DIR/b.$IMGFMT" 1M -_make_test_img -b "$TEST_DIR/m.$IMGFMT" 1M +TEST_IMG="$TEST_DIR/m.$IMGFMT" _make_test_img -b "$TEST_DIR/b.$IMGFMT" -F $IMGFMT 1M +_make_test_img -b "$TEST_DIR/m.$IMGFMT" 1M -F $IMGFMT _launch_qemu -nodefaults
tests/qemu-iotests/141.out +2 -2
@@ -1,7 +1,7 @@ QA output created by 141 Formatting 'TEST_DIR/b.IMGFMT', fmt=IMGFMT size=1048576 -Formatting 'TEST_DIR/m.IMGFMT', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/b.IMGFMT -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/m.IMGFMT +Formatting 'TEST_DIR/m.IMGFMT', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/b.IMGFMT backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/m.IMGFMT backing_fmt=IMGFMT {'execute': 'qmp_capabilities'} {"return": {}}
tests/qemu-iotests/142 +1 -1
@@ -67,7 +67,7 @@ size=128M TEST_IMG="$TEST_IMG.base" _make_test_img $size TEST_IMG="$TEST_IMG.snap" _make_test_img $size -_make_test_img -b "$TEST_IMG.base" $size +_make_test_img -b "$TEST_IMG.base" $size -F $IMGFMT echo echo === Simple test for all cache modes ===
tests/qemu-iotests/142.out +1 -1
@@ -1,7 +1,7 @@ QA output created by 142 Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=134217728 Formatting 'TEST_DIR/t.IMGFMT.snap', fmt=IMGFMT size=134217728 -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT === Simple test for all cache modes ===
tests/qemu-iotests/153 +7 -7
@@ -94,7 +94,7 @@ for opts1 in "" "read-only=on" "read-only=on,force-share=on"; do echo echo "== Creating test image ==" - _make_test_img -b "${TEST_IMG}.base" + _make_test_img -b "${TEST_IMG}.base" -F $IMGFMT echo echo "== Launching QEMU, opts: '$opts1' =="
@@ -125,7 +125,7 @@ for opts1 in "" "read-only=on" "read-only=on,force-share=on"; do _run_cmd $QEMU_IMG amend -o "" $L "${TEST_IMG}" _run_cmd $QEMU_IMG commit $L "${TEST_IMG}" _run_cmd $QEMU_IMG resize $L "${TEST_IMG}" $size - _run_cmd $QEMU_IMG rebase $L "${TEST_IMG}" -b "${TEST_IMG}.base" + _run_cmd $QEMU_IMG rebase $L "${TEST_IMG}" -b "${TEST_IMG}.base" -F $IMGFMT _run_cmd $QEMU_IMG snapshot -l $L "${TEST_IMG}" _run_cmd $QEMU_IMG convert $L "${TEST_IMG}" "${TEST_IMG}.convert" _run_cmd $QEMU_IMG dd $L if="${TEST_IMG}" of="${TEST_IMG}.convert" bs=512 count=1
@@ -135,7 +135,7 @@ for opts1 in "" "read-only=on" "read-only=on,force-share=on"; do # qemu-img create does not support -U if [ -z "$L" ]; then _run_cmd $QEMU_IMG create -f $IMGFMT "${TEST_IMG}" \ - -b ${TEST_IMG}.base + -b ${TEST_IMG}.base -F $IMGFMT # Read the file format. It used to be the case that # file-posix simply truncated the file, but the qcow2 # driver then failed to format it because it was unable
@@ -168,9 +168,9 @@ done echo echo "== Creating ${TEST_IMG}.[abc] ==" | _filter_testdir ( - $QEMU_IMG create -f qcow2 "${TEST_IMG}.a" -b "${TEST_IMG}" - $QEMU_IMG create -f qcow2 "${TEST_IMG}.b" -b "${TEST_IMG}" - $QEMU_IMG create -f qcow2 "${TEST_IMG}.c" -b "${TEST_IMG}.b" + $QEMU_IMG create -f qcow2 "${TEST_IMG}.a" -b "${TEST_IMG}" -F $IMGFMT + $QEMU_IMG create -f qcow2 "${TEST_IMG}.b" -b "${TEST_IMG}" -F $IMGFMT + $QEMU_IMG create -f qcow2 "${TEST_IMG}.c" -b "${TEST_IMG}.b" -F $IMGFMT ) | _filter_img_create echo
@@ -219,7 +219,7 @@ _send_qemu_cmd $QEMU_HANDLE \ _run_cmd $QEMU_IO "${TEST_IMG}" -c 'write 0 512' echo "Creating overlay with qemu-img when the guest is running should be allowed" -_run_cmd $QEMU_IMG create -f $IMGFMT -b "${TEST_IMG}" "${TEST_IMG}.overlay" +_run_cmd $QEMU_IMG create -f $IMGFMT -b "${TEST_IMG}" -F $IMGFMT "${TEST_IMG}.overlay" echo "== Closing an image should unlock it ==" _send_qemu_cmd $QEMU_HANDLE \
tests/qemu-iotests/153.out +19 -16
@@ -6,7 +6,7 @@ QEMU_PROG: -drive if=none,file=null-co://,readonly=off,force-share=on: force-sha Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=33554432 == Creating test image == -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=33554432 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=33554432 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT == Launching QEMU, opts: '' ==
@@ -68,7 +68,7 @@ _qemu_img_wrapper resize TEST_DIR/t.qcow2 32M qemu-img: Could not open 'TEST_DIR/t.qcow2': Failed to get "write" lock Is another process using the image [TEST_DIR/t.qcow2]? -_qemu_img_wrapper rebase TEST_DIR/t.qcow2 -b TEST_DIR/t.qcow2.base +_qemu_img_wrapper rebase TEST_DIR/t.qcow2 -b TEST_DIR/t.qcow2.base -F qcow2 qemu-img: Could not open 'TEST_DIR/t.qcow2': Failed to get "write" lock Is another process using the image [TEST_DIR/t.qcow2]?
@@ -92,10 +92,11 @@ _qemu_img_wrapper bench -w -c 1 TEST_DIR/t.qcow2 qemu-img: Could not open 'TEST_DIR/t.qcow2': Failed to get "write" lock Is another process using the image [TEST_DIR/t.qcow2]? -_qemu_img_wrapper create -f qcow2 TEST_DIR/t.qcow2 -b TEST_DIR/t.qcow2.base +_qemu_img_wrapper create -f qcow2 TEST_DIR/t.qcow2 -b TEST_DIR/t.qcow2.base -F qcow2 qemu-img: TEST_DIR/t.qcow2: Failed to get "write" lock Is another process using the image [TEST_DIR/t.qcow2]? file format: IMGFMT +backing file format: IMGFMT == Running utility commands -U ==
@@ -130,7 +131,7 @@ _qemu_img_wrapper resize -U TEST_DIR/t.qcow2 32M qemu-img: unrecognized option '-U' Try 'qemu-img --help' for more information -_qemu_img_wrapper rebase -U TEST_DIR/t.qcow2 -b TEST_DIR/t.qcow2.base +_qemu_img_wrapper rebase -U TEST_DIR/t.qcow2 -b TEST_DIR/t.qcow2.base -F qcow2 qemu-img: Could not open 'TEST_DIR/t.qcow2': Failed to get "write" lock Is another process using the image [TEST_DIR/t.qcow2]?
@@ -152,7 +153,7 @@ Round done Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=33554432 == Creating test image == -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=33554432 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=33554432 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT == Launching QEMU, opts: 'read-only=on' ==
@@ -199,7 +200,7 @@ _qemu_img_wrapper resize TEST_DIR/t.qcow2 32M qemu-img: Could not open 'TEST_DIR/t.qcow2': Failed to get "write" lock Is another process using the image [TEST_DIR/t.qcow2]? -_qemu_img_wrapper rebase TEST_DIR/t.qcow2 -b TEST_DIR/t.qcow2.base +_qemu_img_wrapper rebase TEST_DIR/t.qcow2 -b TEST_DIR/t.qcow2.base -F qcow2 qemu-img: Could not open 'TEST_DIR/t.qcow2': Failed to get "write" lock Is another process using the image [TEST_DIR/t.qcow2]?
@@ -215,10 +216,11 @@ _qemu_img_wrapper bench -w -c 1 TEST_DIR/t.qcow2 qemu-img: Could not open 'TEST_DIR/t.qcow2': Failed to get "write" lock Is another process using the image [TEST_DIR/t.qcow2]? -_qemu_img_wrapper create -f qcow2 TEST_DIR/t.qcow2 -b TEST_DIR/t.qcow2.base +_qemu_img_wrapper create -f qcow2 TEST_DIR/t.qcow2 -b TEST_DIR/t.qcow2.base -F qcow2 qemu-img: TEST_DIR/t.qcow2: Failed to get "write" lock Is another process using the image [TEST_DIR/t.qcow2]? file format: IMGFMT +backing file format: IMGFMT == Running utility commands -U ==
@@ -253,7 +255,7 @@ _qemu_img_wrapper resize -U TEST_DIR/t.qcow2 32M qemu-img: unrecognized option '-U' Try 'qemu-img --help' for more information -_qemu_img_wrapper rebase -U TEST_DIR/t.qcow2 -b TEST_DIR/t.qcow2.base +_qemu_img_wrapper rebase -U TEST_DIR/t.qcow2 -b TEST_DIR/t.qcow2.base -F qcow2 qemu-img: Could not open 'TEST_DIR/t.qcow2': Failed to get "write" lock Is another process using the image [TEST_DIR/t.qcow2]?
@@ -275,7 +277,7 @@ Round done Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=33554432 == Creating test image == -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=33554432 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=33554432 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT == Launching QEMU, opts: 'read-only=on,force-share=on' ==
@@ -309,7 +311,7 @@ _qemu_img_wrapper commit TEST_DIR/t.qcow2 _qemu_img_wrapper resize TEST_DIR/t.qcow2 32M -_qemu_img_wrapper rebase TEST_DIR/t.qcow2 -b TEST_DIR/t.qcow2.base +_qemu_img_wrapper rebase TEST_DIR/t.qcow2 -b TEST_DIR/t.qcow2.base -F qcow2 _qemu_img_wrapper snapshot -l TEST_DIR/t.qcow2
@@ -321,8 +323,9 @@ _qemu_img_wrapper bench -c 1 TEST_DIR/t.qcow2 _qemu_img_wrapper bench -w -c 1 TEST_DIR/t.qcow2 -_qemu_img_wrapper create -f qcow2 TEST_DIR/t.qcow2 -b TEST_DIR/t.qcow2.base +_qemu_img_wrapper create -f qcow2 TEST_DIR/t.qcow2 -b TEST_DIR/t.qcow2.base -F qcow2 file format: IMGFMT +backing file format: IMGFMT == Running utility commands -U ==
@@ -357,7 +360,7 @@ _qemu_img_wrapper resize -U TEST_DIR/t.qcow2 32M qemu-img: unrecognized option '-U' Try 'qemu-img --help' for more information -_qemu_img_wrapper rebase -U TEST_DIR/t.qcow2 -b TEST_DIR/t.qcow2.base +_qemu_img_wrapper rebase -U TEST_DIR/t.qcow2 -b TEST_DIR/t.qcow2.base -F qcow2 _qemu_img_wrapper snapshot -l -U TEST_DIR/t.qcow2
@@ -398,9 +401,9 @@ Is another process using the image [TEST_DIR/t.qcow2]? == Two devices with the same image (read-only=on,force-share=on - read-only=on,force-share=on) == == Creating TEST_DIR/t.qcow2.[abc] == -Formatting 'TEST_DIR/t.IMGFMT.a', fmt=IMGFMT size=33554432 backing_file=TEST_DIR/t.IMGFMT -Formatting 'TEST_DIR/t.IMGFMT.b', fmt=IMGFMT size=33554432 backing_file=TEST_DIR/t.IMGFMT -Formatting 'TEST_DIR/t.IMGFMT.c', fmt=IMGFMT size=33554432 backing_file=TEST_DIR/t.IMGFMT.b +Formatting 'TEST_DIR/t.IMGFMT.a', fmt=IMGFMT size=33554432 backing_file=TEST_DIR/t.IMGFMT backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT.b', fmt=IMGFMT size=33554432 backing_file=TEST_DIR/t.IMGFMT backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT.c', fmt=IMGFMT size=33554432 backing_file=TEST_DIR/t.IMGFMT.b backing_fmt=IMGFMT == Two devices sharing the same file in backing chain ==
@@ -430,7 +433,7 @@ qemu-io: can't open device TEST_DIR/t.qcow2: Failed to get "write" lock Is another process using the image [TEST_DIR/t.qcow2]? Creating overlay with qemu-img when the guest is running should be allowed -_qemu_img_wrapper create -f qcow2 -b TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.overlay +_qemu_img_wrapper create -f qcow2 -b TEST_DIR/t.qcow2 -F qcow2 TEST_DIR/t.qcow2.overlay == Closing an image should unlock it == { 'execute': 'human-monitor-command', 'arguments': { 'command-line': 'drive_del d0' } } {"return": ""}
tests/qemu-iotests/154 +21 -21
168 lines not on this page · raw message
tests/qemu-iotests/154.out +21 -21
162 lines not on this page · raw message
tests/qemu-iotests/155 +8 -4
@@ -52,9 +52,12 @@ class BaseClass(iotests.QMPTestCase): def setUp(self): qemu_img('create', '-f', iotests.imgfmt, back0_img, '1440K') - qemu_img('create', '-f', iotests.imgfmt, '-b', back0_img, back1_img) - qemu_img('create', '-f', iotests.imgfmt, '-b', back1_img, back2_img) - qemu_img('create', '-f', iotests.imgfmt, '-b', back2_img, source_img) + qemu_img('create', '-f', iotests.imgfmt, '-b', back0_img, + '-F', iotests.imgfmt, back1_img) + qemu_img('create', '-f', iotests.imgfmt, '-b', back1_img, + '-F', iotests.imgfmt, back2_img) + qemu_img('create', '-f', iotests.imgfmt, '-b', back2_img, + '-F', iotests.imgfmt, source_img) self.vm = iotests.VM() # Add the BDS via blockdev-add so it stays around after the mirror block
@@ -72,7 +75,8 @@ class BaseClass(iotests.QMPTestCase): if self.existing: if self.target_backing: qemu_img('create', '-f', iotests.imgfmt, - '-b', self.target_backing, target_img, '1440K') + '-b', self.target_backing, '-F', 'raw', + target_img, '1440K') else: qemu_img('create', '-f', iotests.imgfmt, target_img, '1440K')
tests/qemu-iotests/156 +5 -4
@@ -56,7 +56,7 @@ _unsupported_imgopts data_file # Create source disk TEST_IMG="$TEST_IMG.backing" _make_test_img 1M -_make_test_img -b "$TEST_IMG.backing" 1M +_make_test_img -b "$TEST_IMG.backing" -F $IMGFMT 1M $QEMU_IO -c 'write -P 1 0 256k' "$TEST_IMG.backing" | _filter_qemu_io $QEMU_IO -c 'write -P 2 64k 192k' "$TEST_IMG" | _filter_qemu_io
@@ -68,7 +68,7 @@ _send_qemu_cmd $QEMU_HANDLE \ 'return' # Create snapshot -TEST_IMG="$TEST_IMG.overlay" _make_test_img -u -b "$TEST_IMG" 1M +TEST_IMG="$TEST_IMG.overlay" _make_test_img -u -b "$TEST_IMG" -F $IMGFMT 1M _send_qemu_cmd $QEMU_HANDLE \ "{ 'execute': 'blockdev-snapshot-sync', 'arguments': { 'device': 'source',
@@ -85,7 +85,8 @@ _send_qemu_cmd $QEMU_HANDLE \ 'return' # Create target image -TEST_IMG="$TEST_IMG.target.overlay" _make_test_img -u -b "$TEST_IMG.target" 1M +TEST_IMG="$TEST_IMG.target.overlay" _make_test_img -u -b "$TEST_IMG.target" \ + -F $IMGFMT 1M # Mirror snapshot _send_qemu_cmd $QEMU_HANDLE \
@@ -111,7 +112,7 @@ _send_qemu_cmd $QEMU_HANDLE \ # Copy source backing chain to the target before completing the job cp "$TEST_IMG.backing" "$TEST_IMG.target.backing" cp "$TEST_IMG" "$TEST_IMG.target" -$QEMU_IMG rebase -u -b "$TEST_IMG.target.backing" "$TEST_IMG.target" +$QEMU_IMG rebase -u -b "$TEST_IMG.target.backing" -F $IMGFMT "$TEST_IMG.target" # Complete block job _send_qemu_cmd $QEMU_HANDLE \
tests/qemu-iotests/156.out +3 -3
@@ -1,20 +1,20 @@ QA output created by 156 Formatting 'TEST_DIR/t.IMGFMT.backing', fmt=IMGFMT size=1048576 -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT.backing +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT.backing backing_fmt=IMGFMT wrote 262144/262144 bytes at offset 0 256 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 196608/196608 bytes at offset 65536 192 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) { 'execute': 'qmp_capabilities' } {"return": {}} -Formatting 'TEST_DIR/t.IMGFMT.overlay', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT +Formatting 'TEST_DIR/t.IMGFMT.overlay', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT backing_fmt=IMGFMT { 'execute': 'blockdev-snapshot-sync', 'arguments': { 'device': 'source', 'snapshot-file': 'TEST_DIR/t.IMGFMT.overlay', 'format': 'IMGFMT', 'mode': 'existing' } } {"return": {}} { 'execute': 'human-monitor-command', 'arguments': { 'command-line': 'qemu-io source "write -P 3 128k 128k"' } } wrote 131072/131072 bytes at offset 131072 128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) {"return": ""} -Formatting 'TEST_DIR/t.IMGFMT.target.overlay', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT.target +Formatting 'TEST_DIR/t.IMGFMT.target.overlay', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT.target backing_fmt=IMGFMT { 'execute': 'drive-mirror', 'arguments': { 'device': 'source', 'target': 'TEST_DIR/t.IMGFMT.target.overlay', 'mode': 'existing', 'sync': 'top' } } {"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "created", "id": "source"}} {"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "running", "id": "source"}}
tests/qemu-iotests/158 +1 -1
@@ -64,7 +64,7 @@ echo "== verify pattern ==" $QEMU_IO --object $SECRET -c "read -P 0xa 0 $size" --image-opts $IMGSPECBASE | _filter_qemu_io | _filter_testdir echo "== create overlay ==" -_make_test_img -u --object $SECRET -o "encryption=on,encrypt.key-secret=sec0" -b "$TEST_IMG_BASE" $size +_make_test_img -u --object $SECRET -o "encryption=on,encrypt.key-secret=sec0" -b "$TEST_IMG_BASE" -F $IMGFMT $size echo echo "== writing part of a cluster =="
tests/qemu-iotests/158.out +1 -1
@@ -10,7 +10,7 @@ wrote 134217728/134217728 bytes at offset 0 read 134217728/134217728 bytes at offset 0 128 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) == create overlay == -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base encryption=on encrypt.key-secret=sec0 +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT encryption=on encrypt.key-secret=sec0 == writing part of a cluster == wrote 1024/1024 bytes at offset 0
tests/qemu-iotests/161 +4 -4
@@ -49,8 +49,8 @@ IMG_SIZE=1M # Create the images TEST_IMG="$TEST_IMG.base" _make_test_img $IMG_SIZE | _filter_imgfmt -TEST_IMG="$TEST_IMG.int" _make_test_img -b "$TEST_IMG.base" | _filter_imgfmt -_make_test_img -b "$TEST_IMG.int" | _filter_imgfmt +TEST_IMG="$TEST_IMG.int" _make_test_img -b "$TEST_IMG.base" -F $IMGFMT | _filter_imgfmt +_make_test_img -b "$TEST_IMG.int" -F $IMGFMT -F $IMGFMT | _filter_imgfmt # First test: reopen $TEST.IMG changing the detect-zeroes option on # its backing file ($TEST_IMG.int).
@@ -106,8 +106,8 @@ echo "*** Commit and then change an option on the backing file" echo # Create the images again TEST_IMG="$TEST_IMG.base" _make_test_img $IMG_SIZE | _filter_imgfmt -TEST_IMG="$TEST_IMG.int" _make_test_img -b "$TEST_IMG.base" | _filter_imgfmt -_make_test_img -b "$TEST_IMG.int" | _filter_imgfmt +TEST_IMG="$TEST_IMG.int" _make_test_img -b "$TEST_IMG.base" -F $IMGFMT| _filter_imgfmt +_make_test_img -b "$TEST_IMG.int" -F $IMGFMT | _filter_imgfmt _launch_qemu -drive if=none,file="${TEST_IMG}" _send_qemu_cmd $QEMU_HANDLE \
tests/qemu-iotests/161.out +4 -4
@@ -1,7 +1,7 @@ QA output created by 161 Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=1048576 -Formatting 'TEST_DIR/t.IMGFMT.int', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT.base -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT.int +Formatting 'TEST_DIR/t.IMGFMT.int', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT.int backing_fmt=IMGFMT *** Change an option on the backing file
@@ -29,8 +29,8 @@ Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t. *** Commit and then change an option on the backing file Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=1048576 -Formatting 'TEST_DIR/t.IMGFMT.int', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT.base -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT.int +Formatting 'TEST_DIR/t.IMGFMT.int', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT.int backing_fmt=IMGFMT { 'execute': 'qmp_capabilities' } {"return": {}} { 'execute': 'block-commit', 'arguments': { 'device': 'none0', 'top': 'TEST_DIR/t.IMGFMT.int' } }
tests/qemu-iotests/176 +2 -2
@@ -84,8 +84,8 @@ echo len=$((2100 * 1024 * 1024 + 512)) # larger than 2G, and not cluster aligned TEST_IMG="$TEST_IMG.base" _make_test_img $len -TEST_IMG="$TEST_IMG.itmd" _make_test_img -b "$TEST_IMG.base" $len -_make_test_img -b "$TEST_IMG.itmd" $len +TEST_IMG="$TEST_IMG.itmd" _make_test_img -b "$TEST_IMG.base" -F $IMGFMT $len +_make_test_img -b "$TEST_IMG.itmd" -F $IMGFMT $len # Update the top image to use a feature that is incompatible with fast path case $reason in snapshot) $QEMU_IMG snapshot -c snap "$TEST_IMG" ;;
tests/qemu-iotests/176.out +16 -16
@@ -3,8 +3,8 @@ QA output created by 176 === Test pass snapshot.0 === Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=2202010112 -Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.base -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.itmd +Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.itmd backing_fmt=IMGFMT wrote 196608/196608 bytes at offset 2147287040 192 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 131072/131072 bytes at offset 2147352576
@@ -43,8 +43,8 @@ ID TAG === Test pass snapshot.1 === Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=2202010112 -Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.base -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.itmd +Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.itmd backing_fmt=IMGFMT wrote 196608/196608 bytes at offset 2147287040 192 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 131072/131072 bytes at offset 2147352576
@@ -84,8 +84,8 @@ ID TAG === Test pass snapshot.2 === Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=2202010112 -Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.base -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.itmd +Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.itmd backing_fmt=IMGFMT wrote 196608/196608 bytes at offset 2147287040 192 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 131072/131072 bytes at offset 2147352576
@@ -125,8 +125,8 @@ ID TAG === Test pass snapshot.3 === Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=2202010112 -Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.base -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.itmd +Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.itmd backing_fmt=IMGFMT wrote 196608/196608 bytes at offset 2147287040 192 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 131072/131072 bytes at offset 2147352576
@@ -163,8 +163,8 @@ ID TAG === Test pass bitmap.0 === Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=2202010112 -Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.base -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.itmd +Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.itmd backing_fmt=IMGFMT QMP_VERSION {"return": {}} {"return": {}}
@@ -212,8 +212,8 @@ QMP_VERSION === Test pass bitmap.1 === Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=2202010112 -Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.base -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.itmd +Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.itmd backing_fmt=IMGFMT QMP_VERSION {"return": {}} {"return": {}}
@@ -262,8 +262,8 @@ QMP_VERSION === Test pass bitmap.2 === Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=2202010112 -Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.base -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.itmd +Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.itmd backing_fmt=IMGFMT QMP_VERSION {"return": {}} {"return": {}}
@@ -312,8 +312,8 @@ QMP_VERSION === Test pass bitmap.3 === Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=2202010112 -Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.base -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.itmd +Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202010112 backing_file=TEST_DIR/t.IMGFMT.itmd backing_fmt=IMGFMT QMP_VERSION {"return": {}} {"return": {}}
tests/qemu-iotests/177 +1 -1
@@ -51,7 +51,7 @@ echo "== setting up files ==" TEST_IMG="$TEST_IMG.base" _make_test_img $size $QEMU_IO -c "write -P 11 0 $size" "$TEST_IMG.base" | _filter_qemu_io -_make_test_img -b "$TEST_IMG.base" +_make_test_img -b "$TEST_IMG.base" -F $IMGFMT $QEMU_IO -c "write -P 22 0 $size" "$TEST_IMG" | _filter_qemu_io # Limited to 64k max-transfer
tests/qemu-iotests/177.out +1 -1
@@ -4,7 +4,7 @@ QA output created by 177 Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=134217728 wrote 134217728/134217728 bytes at offset 0 128 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT wrote 134217728/134217728 bytes at offset 0 128 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
tests/qemu-iotests/179 +1 -1
@@ -49,7 +49,7 @@ echo '=== Testing write zeroes with unmap ===' echo TEST_IMG="$TEST_IMG.base" _make_test_img 64M -_make_test_img -b "$TEST_IMG.base" +_make_test_img -b "$TEST_IMG.base" -F $IMGFMT # Offsets chosen at or near 2M boundaries so test works at all cluster sizes # 8k and larger (smaller clusters fail due to non-contiguous allocations)
tests/qemu-iotests/179.out +1 -1
@@ -3,7 +3,7 @@ QA output created by 179 === Testing write zeroes with unmap === Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864 -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT wrote 2097152/2097152 bytes at offset 2097152 2 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 2097152/2097152 bytes at offset 6291456
tests/qemu-iotests/189 +1 -1
@@ -65,7 +65,7 @@ echo "== verify pattern ==" $QEMU_IO --object $SECRET0 -c "read -P 0xa 0 $size" --image-opts $IMGSPECBASE | _filter_qemu_io | _filter_testdir echo "== create overlay ==" -_make_test_img --object $SECRET1 -o "encrypt.format=luks,encrypt.key-secret=sec1,encrypt.iter-time=10" -u -b "$TEST_IMG_BASE" $size +_make_test_img --object $SECRET1 -o "encrypt.format=luks,encrypt.key-secret=sec1,encrypt.iter-time=10" -u -b "$TEST_IMG_BASE" -F $IMGFMT $size echo echo "== writing part of a cluster =="
tests/qemu-iotests/189.out +1 -1
@@ -10,7 +10,7 @@ wrote 16777216/16777216 bytes at offset 0 read 16777216/16777216 bytes at offset 0 16 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) == create overlay == -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=16777216 backing_file=TEST_DIR/t.IMGFMT.base encrypt.format=luks encrypt.key-secret=sec1 encrypt.iter-time=10 +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=16777216 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT encrypt.format=luks encrypt.key-secret=sec1 encrypt.iter-time=10 == writing part of a cluster == wrote 1024/1024 bytes at offset 0
tests/qemu-iotests/191 +6 -6
@@ -54,8 +54,8 @@ echo TEST_IMG="${TEST_IMG}.base" _make_test_img $size TEST_IMG="${TEST_IMG}.mid" _make_test_img -o "backing_fmt=$IMGFMT" -b "${TEST_IMG}.base" -_make_test_img -b "${TEST_IMG}.mid" -TEST_IMG="${TEST_IMG}.ovl2" _make_test_img -b "${TEST_IMG}.mid" +_make_test_img -b "${TEST_IMG}.mid" -F $IMGFMT +TEST_IMG="${TEST_IMG}.ovl2" _make_test_img -b "${TEST_IMG}.mid" -F $IMGFMT $QEMU_IO -c 'write -P 0x55 1M 64k' "${TEST_IMG}.mid" | _filter_qemu_io
@@ -102,10 +102,10 @@ echo === Preparing and starting VM with -drive === echo TEST_IMG="${TEST_IMG}.base" _make_test_img $size -TEST_IMG="${TEST_IMG}.mid" _make_test_img -b "${TEST_IMG}.base" -_make_test_img -b "${TEST_IMG}.mid" -TEST_IMG="${TEST_IMG}.ovl2" _make_test_img -b "${TEST_IMG}.mid" -TEST_IMG="${TEST_IMG}.ovl3" _make_test_img -b "${TEST_IMG}.ovl2" +TEST_IMG="${TEST_IMG}.mid" _make_test_img -b "${TEST_IMG}.base" -F $IMGFMT +_make_test_img -b "${TEST_IMG}.mid" -F $IMGFMT +TEST_IMG="${TEST_IMG}.ovl2" _make_test_img -b "${TEST_IMG}.mid" -F $IMGFMT +TEST_IMG="${TEST_IMG}.ovl3" _make_test_img -b "${TEST_IMG}.ovl2" -F $IMGFMT $QEMU_IO -c 'write -P 0x55 1M 64k' "${TEST_IMG}.mid" | _filter_qemu_io
tests/qemu-iotests/191.out +6 -6
@@ -4,8 +4,8 @@ QA output created by 191 Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864 Formatting 'TEST_DIR/t.IMGFMT.mid', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.mid -Formatting 'TEST_DIR/t.IMGFMT.ovl2', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.mid +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.mid backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT.ovl2', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.mid backing_fmt=IMGFMT wrote 65536/65536 bytes at offset 1048576 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) { 'execute': 'qmp_capabilities' }
@@ -413,10 +413,10 @@ backing file format: IMGFMT === Preparing and starting VM with -drive === Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864 -Formatting 'TEST_DIR/t.IMGFMT.mid', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.mid -Formatting 'TEST_DIR/t.IMGFMT.ovl2', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.mid -Formatting 'TEST_DIR/t.IMGFMT.ovl3', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.ovl2 +Formatting 'TEST_DIR/t.IMGFMT.mid', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.mid backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT.ovl2', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.mid backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT.ovl3', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.ovl2 backing_fmt=IMGFMT wrote 65536/65536 bytes at offset 1048576 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) { 'execute': 'qmp_capabilities' }
tests/qemu-iotests/195 +3 -3
@@ -56,8 +56,8 @@ run_qemu() size=64M TEST_IMG="$TEST_IMG.base" _make_test_img $size -TEST_IMG="$TEST_IMG.mid" _make_test_img -b "$TEST_IMG.base" -_make_test_img -b "$TEST_IMG.mid" +TEST_IMG="$TEST_IMG.mid" _make_test_img -b "$TEST_IMG.base" -F $IMGFMT +_make_test_img -b "$TEST_IMG.mid" -F $IMGFMT echo echo "Change backing file of mid (opened read-only)"
@@ -75,7 +75,7 @@ echo echo "Change backing file of top (opened writable)" echo -TEST_IMG="$TEST_IMG.mid" _make_test_img -b "$TEST_IMG.base" +TEST_IMG="$TEST_IMG.mid" _make_test_img -b "$TEST_IMG.base" -F $IMGFMT run_qemu -drive if=none,file="$TEST_IMG",node-name=top <<EOF {"execute":"qmp_capabilities"}
tests/qemu-iotests/195.out +3 -3
@@ -1,7 +1,7 @@ QA output created by 195 Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864 -Formatting 'TEST_DIR/t.IMGFMT.mid', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.mid +Formatting 'TEST_DIR/t.IMGFMT.mid', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.mid backing_fmt=IMGFMT Change backing file of mid (opened read-only)
@@ -42,7 +42,7 @@ backing file format: IMGFMT Change backing file of top (opened writable) -Formatting 'TEST_DIR/t.IMGFMT.mid', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT.mid', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT Testing: -drive if=none,file=TEST_DIR/t.IMGFMT,node-name=top { QMP_VERSION
tests/qemu-iotests/198 +1 -1
@@ -62,7 +62,7 @@ echo "== writing whole image base ==" $QEMU_IO --object $SECRET0 -c "write -P 0xa 0 $size" --image-opts $IMGSPECBASE | _filter_qemu_io | _filter_testdir echo "== create overlay ==" -_make_test_img --object $SECRET1 -o "encrypt.format=luks,encrypt.key-secret=sec1,encrypt.iter-time=10" -u -b "$TEST_IMG_BASE" $size +_make_test_img --object $SECRET1 -o "encrypt.format=luks,encrypt.key-secret=sec1,encrypt.iter-time=10" -u -b "$TEST_IMG_BASE" -F $IMGFMT $size echo echo "== writing whole image layer =="
tests/qemu-iotests/198.out +2 -1
@@ -6,7 +6,7 @@ Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=16777216 encrypt.format=luk wrote 16777216/16777216 bytes at offset 0 16 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) == create overlay == -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=16777216 backing_file=TEST_DIR/t.IMGFMT.base encrypt.format=luks encrypt.key-secret=sec1 encrypt.iter-time=10 +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=16777216 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT encrypt.format=luks encrypt.key-secret=sec1 encrypt.iter-time=10 == writing whole image layer == wrote 16777216/16777216 bytes at offset 0
@@ -78,6 +78,7 @@ image: json:{ /* filtered */ } file format: IMGFMT virtual size: 16 MiB (16777216 bytes) backing file: TEST_DIR/t.IMGFMT.base +backing file format: IMGFMT Format specific information: encrypt: ivgen alg: plain64
tests/qemu-iotests/204 +1 -1
@@ -52,7 +52,7 @@ echo "== setting up files ==" TEST_IMG="$TEST_IMG.base" _make_test_img $size $QEMU_IO -c "write -P 11 0 $size" "$TEST_IMG.base" | _filter_qemu_io -_make_test_img -b "$TEST_IMG.base" +_make_test_img -b "$TEST_IMG.base" -F $IMGFMT $QEMU_IO -c "write -P 22 0 110M" "$TEST_IMG" | _filter_qemu_io # Limited to 64k max-transfer
tests/qemu-iotests/204.out +1 -1
@@ -4,7 +4,7 @@ QA output created by 204 Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=134217728 wrote 134217728/134217728 bytes at offset 0 128 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT wrote 115343360/115343360 bytes at offset 0 110 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
tests/qemu-iotests/216 +1 -1
@@ -53,7 +53,7 @@ with iotests.FilePath('base.img') as base_img_path, \ assert qemu_img('create', '-f', iotests.imgfmt, base_img_path, '64M') == 0 assert qemu_io_silent(base_img_path, '-c', 'write -P 1 0M 1M') == 0 assert qemu_img('create', '-f', iotests.imgfmt, '-b', base_img_path, - top_img_path) == 0 + '-F', iotests.imgfmt, top_img_path) == 0 assert qemu_io_silent(top_img_path, '-c', 'write -P 2 1M 1M') == 0 log('Done')
tests/qemu-iotests/224 +2 -2
@@ -49,9 +49,9 @@ for filter_node_name in False, True: assert qemu_img('create', '-f', iotests.imgfmt, base_img_path, '64M') == 0 assert qemu_img('create', '-f', iotests.imgfmt, '-b', base_img_path, - mid_img_path) == 0 + '-F', iotests.imgfmt, mid_img_path) == 0 assert qemu_img('create', '-f', iotests.imgfmt, '-b', mid_img_path, - top_img_path) == 0 + '-F', iotests.imgfmt, top_img_path) == 0 # Something to commit assert qemu_io_silent(mid_img_path, '-c', 'write -P 1 0 1M') == 0
tests/qemu-iotests/228 +3 -2
@@ -54,7 +54,8 @@ with iotests.FilePath('base.img') as base_img_path, \ assert qemu_img('create', '-f', iotests.imgfmt, base_img_path, '64M') == 0 # Choose a funny way to describe the backing filename assert qemu_img('create', '-f', iotests.imgfmt, '-b', - 'file:' + base_img_path, top_img_path) == 0 + 'file:' + base_img_path, '-F', iotests.imgfmt, + top_img_path) == 0 vm.launch()
@@ -169,7 +170,7 @@ with iotests.FilePath('base.img') as base_img_path, \ # filename unless the backing file is opened implicitly with the # overlay) assert qemu_img('create', '-f', iotests.imgfmt, '-b', base_img_path, - top_img_path) == 0 + '-F', iotests.imgfmt, top_img_path) == 0 # You can only reliably override backing options by using a node # reference (or by specifying file.filename, but, well...)
tests/qemu-iotests/245 +2 -1
@@ -44,7 +44,8 @@ class TestBlockdevReopen(iotests.QMPTestCase): def setUp(self): qemu_img('create', '-f', iotests.imgfmt, hd_path[0], '3M') - qemu_img('create', '-f', iotests.imgfmt, '-b', hd_path[0], hd_path[1]) + qemu_img('create', '-f', iotests.imgfmt, '-b', hd_path[0], + '-F', iotests.imgfmt, hd_path[1]) qemu_img('create', '-f', iotests.imgfmt, hd_path[2], '3M') qemu_io('-f', iotests.imgfmt, '-c', 'write -P 0xa0 0 1M', hd_path[0]) qemu_io('-f', iotests.imgfmt, '-c', 'write -P 0xa1 1M 1M', hd_path[1])
tests/qemu-iotests/249 +2 -2
@@ -49,8 +49,8 @@ IMG_SIZE=1M # Create the images: base <- int <- active TEST_IMG="$TEST_IMG.base" _make_test_img $IMG_SIZE | _filter_imgfmt -TEST_IMG="$TEST_IMG.int" _make_test_img -b "$TEST_IMG.base" | _filter_imgfmt -_make_test_img -b "$TEST_IMG.int" | _filter_imgfmt +TEST_IMG="$TEST_IMG.int" _make_test_img -b "$TEST_IMG.base" -F $IMGFMT | _filter_imgfmt +_make_test_img -b "$TEST_IMG.int" -F $IMGFMT | _filter_imgfmt # Launch QEMU with these two drives: # none0: base (read-only)
tests/qemu-iotests/249.out +2 -2
@@ -1,7 +1,7 @@ QA output created by 249 Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=1048576 -Formatting 'TEST_DIR/t.IMGFMT.int', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT.base -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT.int +Formatting 'TEST_DIR/t.IMGFMT.int', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT.int backing_fmt=IMGFMT { 'execute': 'qmp_capabilities' } {"return": {}}
tests/qemu-iotests/252 +1 -1
@@ -101,7 +101,7 @@ $QEMU_IMG map --output=json "$TEST_IMG" | _filter_qemu_img_map echo -$QEMU_IMG rebase -b "$TEST_IMG.base_new" "$TEST_IMG" +$QEMU_IMG rebase -b "$TEST_IMG.base_new" -F $IMGFMT "$TEST_IMG" # Verify the data is correct $QEMU_IO "$TEST_IMG" \
tests/qemu-iotests/257 +2 -1
@@ -238,7 +238,8 @@ def compare_images(image, reference, baseimg=None, expected_match=True): """ expected_ret = 0 if expected_match else 1 if baseimg: - assert qemu_img("rebase", "-u", "-b", baseimg, image) == 0 + assert qemu_img("rebase", "-u", "-b", baseimg, '-F', iotests.imgfmt, + image) == 0 ret = qemu_img("compare", image, reference) log('qemu_img compare "{:s}" "{:s}" ==> {:s}, {:s}'.format( image, reference,
tests/qemu-iotests/267 +2 -2
@@ -73,7 +73,7 @@ size=128M run_test() { if [ -n "$BACKING_FILE" ]; then - _make_test_img -b "$BACKING_FILE" $size + _make_test_img -b "$BACKING_FILE" -F $IMGFMT $size else _make_test_img $size fi
@@ -149,7 +149,7 @@ echo echo "=== -blockdev with NBD server on the backing file ===" echo -_make_test_img -b "$TEST_IMG.base" $size +_make_test_img -b "$TEST_IMG.base" -F $IMGFMT $size cat <<EOF | nbd_server_start unix:$SOCK_DIR/nbd nbd_server_add -w backing-fmt
tests/qemu-iotests/267.out +3 -3
@@ -128,7 +128,7 @@ ID TAG VM SIZE DATE VM CLOCK === -blockdev with a backing file === Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=134217728 -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT Testing: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT.base,node-name=backing-file -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=file -blockdev driver=IMGFMT,file=file,backing=backing-file,node-name=fmt QEMU X.Y.Z monitor - type 'help' for more information (qemu) savevm snap0
@@ -139,7 +139,7 @@ ID TAG VM SIZE DATE VM CLOCK (qemu) loadvm snap0 (qemu) quit -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT Testing: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT.base,node-name=backing-file -blockdev driver=IMGFMT,file=backing-file,node-name=backing-fmt -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=file -blockdev driver=IMGFMT,file=file,backing=backing-fmt,node-name=fmt QEMU X.Y.Z monitor - type 'help' for more information (qemu) savevm snap0
@@ -158,7 +158,7 @@ Internal snapshots on backing file: === -blockdev with NBD server on the backing file === -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT Testing: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT.base,node-name=backing-file -blockdev driver=IMGFMT,file=backing-file,node-name=backing-fmt -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=file -blockdev driver=IMGFMT,file=file,backing=backing-fmt,node-name=fmt QEMU X.Y.Z monitor - type 'help' for more information (qemu) nbd_server_start unix:SOCK_DIR/nbd
tests/qemu-iotests/270 +1 -1
@@ -53,7 +53,7 @@ $QEMU_IO -c 'write 0 512' "$TEST_IMG.base" | _filter_qemu_io # We need a large cluster size, see below for why (above the $QEMU_IO # invocation) _make_test_img -o cluster_size=2M,data_file="$TEST_IMG.orig" \ - -b "$TEST_IMG.base" 4G + -b "$TEST_IMG.base" -F $IMGFMT 4G # We want a null-co as the data file, because it allows us to quickly # "write" 2G of data without using any space.
tests/qemu-iotests/270.out +1 -1
@@ -2,7 +2,7 @@ QA output created by 270 Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=4294967296 wrote 512/512 bytes at offset 0 512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=4294967296 backing_file=TEST_DIR/t.IMGFMT.base data_file=TEST_DIR/t.IMGFMT.orig +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=4294967296 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT data_file=TEST_DIR/t.IMGFMT.orig wrote 2147483136/2147483136 bytes at offset 768 2 GiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) No errors were found on the image.
tests/qemu-iotests/273 +2 -2
@@ -56,8 +56,8 @@ run_qemu() } TEST_IMG="$TEST_IMG.base" _make_test_img 64M -TEST_IMG="$TEST_IMG.mid" _make_test_img -b "$TEST_IMG.base" -_make_test_img -b "$TEST_IMG.mid" +TEST_IMG="$TEST_IMG.mid" _make_test_img -b "$TEST_IMG.base" -F $IMGFMT +_make_test_img -b "$TEST_IMG.mid" -F $IMGFMT run_qemu \ -blockdev file,node-name=base,filename="$TEST_IMG.base" \
tests/qemu-iotests/273.out +2 -2
@@ -1,7 +1,7 @@ QA output created by 273 Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864 -Formatting 'TEST_DIR/t.IMGFMT.mid', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.mid +Formatting 'TEST_DIR/t.IMGFMT.mid', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.mid backing_fmt=IMGFMT Testing: -blockdev file,node-name=base,filename=TEST_DIR/t.IMGFMT.base -blockdev file,node-name=midf,filename=TEST_DIR/t.IMGFMT.mid -blockdev {"driver":"IMGFMT","node-name":"mid","file":"midf","backing":null} -blockdev file,node-name=topf,filename=TEST_DIR/t.IMGFMT -blockdev {"driver":"IMGFMT","file":"topf","node-name":"top","backing":null} { QMP_VERSION
tests/qemu-iotests/279 +2 -2
@@ -42,8 +42,8 @@ _unsupported_imgopts "subformat=monolithicFlat" \ "subformat=twoGbMaxExtentFlat" \ TEST_IMG="$TEST_IMG.base" _make_test_img 64M -TEST_IMG="$TEST_IMG.mid" _make_test_img -b "$TEST_IMG.base" -_make_test_img -b "$TEST_IMG.mid" +TEST_IMG="$TEST_IMG.mid" _make_test_img -b "$TEST_IMG.base" -F $IMGFMT +_make_test_img -b "$TEST_IMG.mid" -F $IMGFMT echo echo '== qemu-img info --backing-chain =='
tests/qemu-iotests/279.out +2 -2
@@ -1,7 +1,7 @@ QA output created by 279 Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864 -Formatting 'TEST_DIR/t.IMGFMT.mid', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base -Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.mid +Formatting 'TEST_DIR/t.IMGFMT.mid', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.mid backing_fmt=IMGFMT == qemu-img info --backing-chain == image: TEST_DIR/t.IMGFMT
Signature · 1 line
2.25.1
Re: [PATCH v2 1/3] iotests: Specify explicit backing format where sensible
Quoted 25 lines · Eric Blake
There are many existing qcow2 images that specify a backing file but no format. This has been the source of CVEs in the past, but has become more prominent of a problem now that libvirt has switched to -blockdev. With older -drive, at least the probing was always done by qemu (so the only risk of a changed format between successive boots of a guest was if qemu was upgraded and probed differently). But with newer -blockdev, libvirt must specify a format; if libvirt guesses raw where the image was formatted, this results in data corruption visible to the guest; conversely, if libvirt guesses qcow2 where qemu was using raw, this can result in potential security holes, so modern libvirt instead refuses to use images without explicit backing format.
The change in libvirt to reject images without explicit backing format has pointed out that a number of tools have been far too reliant on probing in the past. It's time to set a better example in our own iotests of properly setting this parameter.
iotest calls to create, rebase, convert, and amend are all impacted to some degree. It's a bit annoying that we are inconsistent on command line - while all of those accept -o backing_file=...,backing_fmt=..., the shortcuts are different: create and rebase have -b and -F, convert has -B but no -F, and amend has no shortcuts.
Signed-off-by Eric Blake <[email protected]>---
[...]
tests/qemu-iotests/017 echo "Creating test image with backing file" · line 70
Quoted 13 lines
113 files changed, 414 insertions(+), 338 deletions(-)tests/qemu-iotests/017 +1
-1@@ -66,7 +66,7 @@ echo "Creating test image with backing file" echo TEST_IMG=$TEST_IMG_SAVE -_make_test_img -b "$TEST_IMG.base" 6G +_make_test_img -b "$TEST_IMG.base" -F $IMGFMT 6G
My understanding of the intricacies of the qemu-iotest suite is not good enoug to be able to review this patch. Specifically $IMGFMT in this instance is also used in the '-f' switch of qemu-img in _make_test_img and I don't know if it's expected for the backing file to share the format.
Re: [PATCH v2 1/3] iotests: Specify explicit backing format where sensible
Quoted 38 lines · Peter Krempa
Quoted 25 lines · Eric Blake
There are many existing qcow2 images that specify a backing file but no format. This has been the source of CVEs in the past, but has become more prominent of a problem now that libvirt has switched to -blockdev. With older -drive, at least the probing was always done by qemu (so the only risk of a changed format between successive boots of a guest was if qemu was upgraded and probed differently). But with newer -blockdev, libvirt must specify a format; if libvirt guesses raw where the image was formatted, this results in data corruption visible to the guest; conversely, if libvirt guesses qcow2 where qemu was using raw, this can result in potential security holes, so modern libvirt instead refuses to use images without explicit backing format.
The change in libvirt to reject images without explicit backing format has pointed out that a number of tools have been far too reliant on probing in the past. It's time to set a better example in our own iotests of properly setting this parameter.
iotest calls to create, rebase, convert, and amend are all impacted to some degree. It's a bit annoying that we are inconsistent on command line - while all of those accept -o backing_file=...,backing_fmt=..., the shortcuts are different: create and rebase have -b and -F, convert has -B but no -F, and amend has no shortcuts.
Signed-off-by Eric Blake <[email protected]>---
[...]
Quoted 9 lines
113 files changed, 414 insertions(+), 338 deletions(-)tests/qemu-iotests/017 +0
-0@@ -66,7 +66,7 @@ echo "Creating test image with backing file" echo
Quoted 10 lines
tests/qemu-iotests/017 echo "Creating test image with backing file" · line 70
Quoted 4 lines
tests/qemu-iotests/017 +1
-1TEST_IMG=$TEST_IMG_SAVE -_make_test_img -b "$TEST_IMG.base" 6G +_make_test_img -b "$TEST_IMG.base" -F $IMGFMT 6GMy understanding of the intricacies of the qemu-iotest suite is not good enoug to be able to review this patch. Specifically $IMGFMT in this instance is also used in the '-f' switch of qemu-img in
_make_test_imgand I don't know if it's expected for the backing file to share the format.
IMGFMT is also used for the earlier creation of the base image and I did not see it changing in any of the tests.
Jano
Re: [PATCH v2 1/3] iotests: Specify explicit backing format where sensible
In reply to Peter KrempaQuoted 38 lines · Peter Krempa
Quoted 25 lines · Eric Blake
There are many existing qcow2 images that specify a backing file but no format. This has been the source of CVEs in the past, but has become more prominent of a problem now that libvirt has switched to -blockdev. With older -drive, at least the probing was always done by qemu (so the only risk of a changed format between successive boots of a guest was if qemu was upgraded and probed differently). But with newer -blockdev, libvirt must specify a format; if libvirt guesses raw where the image was formatted, this results in data corruption visible to the guest; conversely, if libvirt guesses qcow2 where qemu was using raw, this can result in potential security holes, so modern libvirt instead refuses to use images without explicit backing format.
The change in libvirt to reject images without explicit backing format has pointed out that a number of tools have been far too reliant on probing in the past. It's time to set a better example in our own iotests of properly setting this parameter.
iotest calls to create, rebase, convert, and amend are all impacted to some degree. It's a bit annoying that we are inconsistent on command line - while all of those accept -o backing_file=...,backing_fmt=..., the shortcuts are different: create and rebase have -b and -F, convert has -B but no -F, and amend has no shortcuts.
Signed-off-by Eric Blake <[email protected]>---
[...]
Quoted 9 lines
113 files changed, 414 insertions(+), 338 deletions(-)tests/qemu-iotests/017 +0
-0@@ -66,7 +66,7 @@ echo "Creating test image with backing file" echo
Quoted 10 lines
tests/qemu-iotests/017 echo "Creating test image with backing file" · line 70
Quoted 4 lines
tests/qemu-iotests/017 +1
-1TEST_IMG=$TEST_IMG_SAVE -_make_test_img -b "$TEST_IMG.base" 6G +_make_test_img -b "$TEST_IMG.base" -F $IMGFMT 6GMy understanding of the intricacies of the qemu-iotest suite is not good enoug to be able to review this patch. Specifically $IMGFMT in this instance is also used in the '-f' switch of qemu-img in
_make_test_imgand I don't know if it's expected for the backing file to share the format.
That's fine; I'm hoping a qemu expert reviews as well.
$IMGFMT allows an iotest to be run on multiple formats (qcow2, qed, vmdk); most tests in this patch series either hard-coded the base image to be 'raw' (in which case I added -F raw) or to be the same type as the wrapper image under test (in which case it is -F $IMGFMT). We have very few tests that would try to mix-and-match other formats, such as a qcow2 on top of qed.
Signature · 3 lines
Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3226 Virtualization: qemu.org | libvirt.org
Re: [PATCH v2 1/3] iotests: Specify explicit backing format where sensible
In reply to Eric BlakeQuoted 17 lines · Eric Blake
There are many existing qcow2 images that specify a backing file but no format. This has been the source of CVEs in the past, but has become more prominent of a problem now that libvirt has switched to -blockdev. With older -drive, at least the probing was always done by qemu (so the only risk of a changed format between successive boots of a guest was if qemu was upgraded and probed differently). But with newer -blockdev, libvirt must specify a format; if libvirt guesses raw where the image was formatted, this results in data corruption visible to the guest; conversely, if libvirt guesses qcow2 where qemu was using raw, this can result in potential security holes, so modern libvirt instead refuses to use images without explicit backing format.
The change in libvirt to reject images without explicit backing format has pointed out that a number of tools have been far too reliant on probing in the past. It's time to set a better example in our own iotests of properly setting this parameter.
Quoted 8 lines
iotest calls to create, rebase, convert, and amend are all impacted to some degree. It's a bit annoying that we are inconsistent on command line - while all of those accept -o backing_file=...,backing_fmt=..., the shortcuts are different: create and rebase have -b and -F, convert has -B but no -F, and amend has no shortcuts.
Signed-off-by Eric Blake <[email protected]>---
[...]
Test #225 still uses -b without a format:
./check -vmdk 225
QEMU -- "/home/jtomko/work/qemu/build/tests/qemu-iotests/../../x86_64-softmmu/qemu-system-x86_64" -nodefaults -display none -accel qtest QEMU_IMG -- "/home/jtomko/work/qemu/build/tests/qemu-iotests/../../qemu-img" QEMU_IO -- "/home/jtomko/work/qemu/build/tests/qemu-iotests/../../qemu-io" --cache writeback --aio threads -f vmdk QEMU_NBD -- "/home/jtomko/work/qemu/build/tests/qemu-iotests/../../qemu-nbd" IMGFMT -- vmdk IMGPROTO -- file PLATFORM -- Linux/x86_64 lpt 5.4.18-200.fc31.x86_64 TEST_DIR -- /home/jtomko/work/qemu/build/tests/qemu-iotests/scratch SOCK_DIR -- /tmp/tmp.OQIdhLcITP
SOCKET_SCM_HELPER -- /home/jtomko/work/qemu/build/tests/qemu-iotests/socket_scm_helper
225 fail [10:02:31] [10:02:32] output mismatch (see 225.out.bad)
home/jtomko/work/qemu/build/tests/qemu-iotests/225.out.bad 2020-02-27 10:02:32.362755677 +0100 renamed from home/jtomko/work/qemu/tests/qemu-iotests/225.out 2018-09-07 17:21:39.633931691 +0200 +1 -0
@@ -1,6 +1,7 @@ QA output created by 225 Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=1048576 Formatting 'TEST_DIR/t.IMGFMT.not_base', fmt=IMGFMT size=1048576 +qemu-img: warning: Deprecated use of backing file without explicit backing format (detected format of IMGFMT) Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT.base === Testing fitting VMDK backing image ===
Failures: 225
Failed 1 of 1 iotests
Quoted 6 lines
tests/qemu-iotests/030 +0
-0@@ -32,8 +32,12 @@ class TestSingleDrive(iotests.QMPTestCase):
tests/qemu-iotests/030 class TestSingleDrive(iotests.QMPTestCase): · line 40
Quoted 10 lines
tests/qemu-iotests/030 +6
-2def setUp(self): iotests.create_image(backing_img, TestSingleDrive.image_len) - qemu_img('create', '-f', iotests.imgfmt, '-o', 'backing_file=%s' % backing_img, mid_img) - qemu_img('create', '-f', iotests.imgfmt, '-o', 'backing_file=%s' % mid_img, test_img) + qemu_img('create', '-f', iotests.imgfmt, + '-o', 'backing_file=%s' % backing_img, + '-F', 'raw', mid_img) + qemu_img('create', '-f', iotests.imgfmt, + '-o', 'backing_file=%s' % mid_img, + '-F', iotests.imgfmt, test_img)
Consider not mixing shortcuts with -o options.
tests/qemu-iotests/030 class TestSingleDrive(iotests.QMPTestCase): · line 43
Quoted 3 lines
tests/qemu-iotests/030 +0
-0qemu_io('-f', 'raw', '-c', 'write -P 0x1 0 512', backing_img) qemu_io('-f', iotests.imgfmt, '-c', 'write -P 0x1 524288 512', mid_img) self.vm = iotests.VM().add_drive("blkdebug::" + test_img,
With test #225 fixed:
Jano
Re: [PATCH v2 1/3] iotests: Specify explicit backing format where sensible
Quoted 24 lines · Ján Tomko
Quoted 23 lines · Eric Blake
There are many existing qcow2 images that specify a backing file but no format. This has been the source of CVEs in the past, but has become more prominent of a problem now that libvirt has switched to -blockdev. With older -drive, at least the probing was always done by qemu (so the only risk of a changed format between successive boots of a guest was if qemu was upgraded and probed differently). But with newer -blockdev, libvirt must specify a format; if libvirt guesses raw where the image was formatted, this results in data corruption visible to the guest; conversely, if libvirt guesses qcow2 where qemu was using raw, this can result in potential security holes, so modern libvirt instead refuses to use images without explicit backing format.
The change in libvirt to reject images without explicit backing format has pointed out that a number of tools have been far too reliant on probing in the past. It's time to set a better example in our own iotests of properly setting this parameter.
iotest calls to create, rebase, convert, and amend are all impacted to some degree. It's a bit annoying that we are inconsistent on command line - while all of those accept -o backing_file=...,backing_fmt=..., the shortcuts are different: create and rebase have -b and -F, convert has -B but no -F, and amend has no shortcuts.
Quoted 8 lines
Quoted 2 lines
Signed-off-by Eric Blake <[email protected]>---
[...]
Test #225 still uses -b without a format:
./check -vmdk 225
Oh, good catch (I only ran ./check -qcow2, -nbd, and -raw).
Signature · 3 lines
Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3226 Virtualization: qemu.org | libvirt.org
Re: [PATCH v2 1/3] iotests: Specify explicit backing format where sensible
Quoted 14 lines · Eric Blake
Quoted 14 lines
Quoted 13 lines
The change in libvirt to reject images without explicit backing format has pointed out that a number of tools have been far too reliant on probing in the past. It's time to set a better example in our own iotests of properly setting this parameter.
iotest calls to create, rebase, convert, and amend are all impacted to some degree. It's a bit annoying that we are inconsistent on command line - while all of those accept -o backing_file=...,backing_fmt=..., the shortcuts are different: create and rebase have -b and -F, convert has -B but no -F, and amend has no shortcuts.
Signed-off-by Eric Blake <[email protected]>---
Quoted 7 lines
Quoted 5 lines
[...]
Test #225 still uses -b without a format:
./check -vmdk 225
Oh, good catch (I only ran ./check -qcow2, -nbd, and -raw).
Urgh - running './check -vmdk' shows failures in:
017 018 019 020 034 037 069 110 126 216 225 279
all similar to:
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT +qemu-img: TEST_DIR/t.IMGFMT: Backing file format not supported for file format 'IMGFMT'
with knock-on effects. I guess I first have to fix outlier formats like vmdk to ignore a backing file format where it does not hurt.
Signature · 3 lines
Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3226 Virtualization: qemu.org | libvirt.org
PATCH v2 2/3 block: Add support to warn on backing file change without format
In reply to Eric BlakeFor now, this is a mechanical addition; all callers pass false. But the next patch will use it to improve 'qemu-img rebase -u' when selecting a backing file with no format.
--- include/block/block.h | 4 ++-- block.c | 13 ++++++++++--- block/qcow2.c | 2 +- block/stream.c | 2 +- blockdev.c | 3 ++- qemu-img.c | 4 ++-- 6 files changed, 18 insertions(+), 10 deletions(-)
include/block/block.h +2 -2
@@ -350,8 +350,8 @@ BlockMeasureInfo *bdrv_measure(BlockDriver *drv, QemuOpts *opts,void bdrv_get_geometry (BlockDriverState *bs,uint64_t *nb_sectors_ptr);void bdrv_refresh_limits (BlockDriverState *bs,Error **errp);int bdrv_commit (BlockDriverState *bs); -int bdrv_change_backing_file (BlockDriverState *bs, -const char *backing_file,const char *backing_fmt); +int bdrv_change_backing_file (BlockDriverState *bs,const char *backing_file, +const char *backing_fmt,bool warn);void bdrv_register (BlockDriver *bdrv);int bdrv_drop_intermediate (BlockDriverState *top,BlockDriverState *base,const char *backing_file_str);
block.c +10 -3
@@ -1290,7 +1290,8 @@ static int bdrv_backing_update_filename(BdrvChild *c, BlockDriverState *base, } ret =bdrv_change_backing_file (parent, filename, - base->drv ? base->drv->format_name :"" ); + base->drv ? base->drv->format_name :"" , + false);if (ret <0 ) {error_setg_errno (errp, -ret,"Could not update backing file link" ); }
@@ -4505,8 +4506,8 @@ int bdrv_check(BlockDriverState *bs,* image file header * -ENOTSUP - format driver doesn't support changing the backing file */ -int bdrv_change_backing_file (BlockDriverState *bs, -const char *backing_file,const char *backing_fmt) +int bdrv_change_backing_file (BlockDriverState *bs,const char *backing_file, +const char *backing_fmt,bool warn) {BlockDriver *drv = bs->drv;int ret;
@@ -4520,6 +4521,12 @@ int bdrv_change_backing_file(BlockDriverState *bs,return -EINVAL ; } +if (warn && backing_file && !backing_fmt) { +warn_report ("Deprecated use of backing file without explicit " +"backing format, use of this image requires " +"potentially unsafe format probing" ); + } +if (drv->bdrv_change_backing_file !=NULL ) { ret = drv->bdrv_change_backing_file (bs, backing_file, backing_fmt); }else {
block/qcow2.c +1 -1
@@ -3502,7 +3502,7 @@ qcow2_co_create(BlockdevCreateOptions *create_options, Error **errp) } ret =bdrv_change_backing_file (blk_bs (blk), qcow2_opts->backing_file, - backing_format); + backing_format, false);if (ret <0 ) { error_setg_errno(errp, -ret, "Could not assign backing file '%s' " "with format '%s'", qcow2_opts->backing_file,
block/stream.c +1 -1
@@ -78,7 +78,7 @@ static int stream_prepare(Job *job) } }bdrv_set_backing_hd (bs, base, &local_err); - ret =bdrv_change_backing_file (bs, base_id, base_fmt); + ret =bdrv_change_backing_file (bs, base_id, base_fmt, false);if (local_err) {error_report_err (local_err);return -EPERM ;
blockdev.c +2 -1
@@ -4299,7 +4299,8 @@ void qmp_change_backing_file(const char *device, } ret =bdrv_change_backing_file (image_bs, backing_file, - image_bs->drv ? image_bs->drv->format_name :"" ); + image_bs->drv ? image_bs->drv->format_name :"" , + false);if (ret <0 ) { error_setg_errno(errp, -ret, "Could not change backing file to '%s'",
qemu-img.c +2 -2
@@ -3637,9 +3637,9 @@ static int img_rebase(int argc, char **argv)* doesn't change when we switch the backing file. */ if (out_baseimg && *out_baseimg) { - ret =bdrv_change_backing_file (bs, out_baseimg, out_basefmt); + ret =bdrv_change_backing_file (bs, out_baseimg, out_basefmt, false); }else { - ret =bdrv_change_backing_file (bs,NULL ,NULL ); + ret =bdrv_change_backing_file (bs,NULL ,NULL , false); }if (ret == -ENOSPC ) {
Signature · 1 line
2.25.1
Re: [PATCH v2 2/3] block: Add support to warn on backing file change without format
Quoted 5 lines · Eric Blake
For now, this is a mechanical addition; all callers pass false. But the next patch will use it to improve 'qemu-img rebase -u' when selecting a backing file with no format.
Signed-off-by Eric Blake <[email protected]>
Quoted 8 lines
--- include/block/block.h | 4 ++-- block.c | 13 ++++++++++--- block/qcow2.c | 2 +- block/stream.c | 2 +- blockdev.c | 3 ++- qemu-img.c | 4 ++-- 6 files changed, 18 insertions(+), 10 deletions(-)
Re: [PATCH v2 2/3] block: Add support to warn on backing file change without format
In reply to Eric BlakeQuoted 5 lines · Eric Blake
For now, this is a mechanical addition; all callers pass false. But the next patch will use it to improve 'qemu-img rebase -u' when selecting a backing file with no format.
Signed-off-by Eric Blake <[email protected]>
Quoted 9 lines
---
include/block/block.h | 4 ++-- block.c | 13 ++++++++++--- block/qcow2.c | 2 +- block/stream.c | 2 +- blockdev.c | 3 ++- qemu-img.c | 4 ++-- 6 files changed, 18 insertions(+), 10 deletions(-)
Jano
PATCH v2 3/3 qemu-img: Deprecate use of -b without -F
In reply to Eric BlakeCreating an image that requires format probing of the backing image is inherently unsafe (we've had several CVEs over the years based on probes leaking information to the guest on a subsequent boot). If our probing algorithm ever changes, or if other tools like libvirt determine a different probe result than we do, then subsequent use of that backing file under a different format will present corrupted data to the guest. Start a deprecation clock so that future qemu-img can refuse to create unsafe backing chains that would rely on probing.
However, there is one time where probing is safe: if we probe raw, then it is safe to record that implicitly in the image (but we still warn, as it's better to teach the user to supply -F always than to make them guess when it is safe).
iotest 114 specifically wants to create an unsafe image for later amendment rather than defaulting to our new default of recording a probed format, so it needs an update.
--- qemu-deprecated.texi | 15 +++++++++++++++ block.c | 21 ++++++++++++++++++++- qemu-img.c | 8 +++++++- tests/qemu-iotests/114 | 4 ++-- tests/qemu-iotests/114.out | 1 + 5 files changed, 45 insertions(+), 4 deletions(-)
qemu-deprecated.texi +15 -0
@@ -309,6 +309,21 @@ The above, converted to the current supported format: @section Related binaries +@subsection qemu-img backing file without format (since 5.0.0) + +The use of @command{qemu-img create}, @command{qemu-img rebase}, +@command{qemu-img convert}, or @command{qemu-img ament} to create or +modify an image that depends on a backing file now recommends that an +explicit backing format be provided. This is for safety - if qemu +probes a different format than what you thought, the data presented to +the guest will be corrupt; similarly, presenting a raw image to a +guest allows the guest a potential security exploit if a future probe +sees non-raw. To avoid warning messages, or even future refusal to +create an unsafe image, you must pass @option{-o backing_fmt=} (or +shorthand @option{-F}) to specify the intended backing format. You +may use @command{qemu-img rebase -u} to retroactively add a backing +format to an existing image. + @subsection qemu-img convert -n -o (since 4.2.0) All options specified in @option{-o} are image creation options, so
block.c +20 -1
@@ -6009,6 +6009,20 @@ void bdrv_img_create(const char *filename, const char *fmt, "Could not open backing image to determine size.\n"); goto out; }else { +if (!backing_fmt) { +warn_report ("Deprecated use of backing file without explicit " +"backing format (detected format of %s)" , + bs->drv->format_name); +if (bs->drv == &bdrv_raw) { +/* +* A probe of raw is always correct, so in this one +* case, we can write that into the image. +*/ + backing_fmt = bs->drv->format_name; +qemu_opt_set (opts,BLOCK_OPT_BACKING_FMT , backing_fmt, +NULL ); + } + }if (size ==-1 ) {/* Opened BS, have no size */ size =bdrv_getlength (bs);
@@ -6022,7 +6036,12 @@ void bdrv_img_create(const char *filename, const char *fmt, }bdrv_unref (bs); } - }/* (backing_file && !(flags & BDRV_O_NO_BACKING)) */ +/* (backing_file && !(flags & BDRV_O_NO_BACKING)) */ + }else if (backing_file && !backing_fmt) { +warn_report ("Deprecated use of unopened backing file without " +"explicit backing format, use of this image requires " +"potentially unsafe format probing" ); + }if (size ==-1 ) {error_setg (errp,"Image creation needs a size parameter" );
qemu-img.c +7 -1
@@ -3637,7 +3637,13 @@ static int img_rebase(int argc, char **argv)* doesn't change when we switch the backing file. */ if (out_baseimg && *out_baseimg) { - ret =bdrv_change_backing_file (bs, out_baseimg, out_basefmt, false); +if (blk_new_backing && !out_basefmt) { + out_basefmt =blk_bs (blk_new_backing)->drv->format_name; +warn_report ("Deprecated use of backing file " +"without explicit backing format, using " +"detected format of %s" , out_basefmt); + } + ret =bdrv_change_backing_file (bs, out_baseimg, out_basefmt, true); }else { ret =bdrv_change_backing_file (bs,NULL ,NULL , false); }
tests/qemu-iotests/114 +2 -2
@@ -42,9 +42,9 @@ _unsupported_proto vxhs # qcow2.py does not work too well with external data files _unsupported_imgopts data_file - +# Intentionally specify backing file without backing format TEST_IMG="$TEST_IMG.base" _make_test_img 64M -_make_test_img -b "$TEST_IMG.base" 64M +_make_test_img -u -b "$TEST_IMG.base" 64M # Set an invalid backing file format $PYTHON qcow2.py "$TEST_IMG" add-header-ext 0xE2792ACA "foo"
tests/qemu-iotests/114.out +1 -0
@@ -1,5 +1,6 @@ QA output created by 114 Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864 +qemu-img: warning: Deprecated use of unopened backing file without explicit backing format, use of this image requires potentially unsafe format probing Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base image: TEST_DIR/t.IMGFMT file format: IMGFMT
Signature · 1 line
2.25.1
Re: [PATCH v2 3/3] qemu-img: Deprecate use of -b without -F
Quoted 32 lines · Eric Blake
Creating an image that requires format probing of the backing image is inherently unsafe (we've had several CVEs over the years based on probes leaking information to the guest on a subsequent boot). If our probing algorithm ever changes, or if other tools like libvirt determine a different probe result than we do, then subsequent use of that backing file under a different format will present corrupted data to the guest. Start a deprecation clock so that future qemu-img can refuse to create unsafe backing chains that would rely on probing.
However, there is one time where probing is safe: if we probe raw, then it is safe to record that implicitly in the image (but we still warn, as it's better to teach the user to supply -F always than to make them guess when it is safe).
iotest 114 specifically wants to create an unsafe image for later amendment rather than defaulting to our new default of recording a probed format, so it needs an update.
Signed-off-by Eric Blake <[email protected]>--- qemu-deprecated.texi | 15 +++++++++++++++ block.c | 21 ++++++++++++++++++++- qemu-img.c | 8 +++++++- tests/qemu-iotests/114 | 4 ++-- tests/qemu-iotests/114.out | 1 + 5 files changed, 45 insertions(+), 4 deletions(-)qemu-deprecated.texi +0
-0
qemu-deprecated.texi The above, converted to the current supported format: · line 315
Quoted 7 lines
qemu-deprecated.texi +4
-0@@ -309,6 +309,21 @@ The above, converted to the current supported format: @section Related binaries +@subsection qemu-img backing file without format (since 5.0.0) + +The use of @command{qemu-img create}, @command{qemu-img rebase}, +@command{qemu-img convert}, or @command{qemu-img ament} to create or
s/ament/amend/
qemu-deprecated.texi The above, converted to the current supported format: · line 325
Quoted 10 lines
qemu-deprecated.texi +10
-0+modify an image that depends on a backing file now recommends that an +explicit backing format be provided. This is for safety - if qemu +probes a different format than what you thought, the data presented to +the guest will be corrupt; similarly, presenting a raw image to a +guest allows the guest a potential security exploit if a future probe +sees non-raw. To avoid warning messages, or even future refusal to +create an unsafe image, you must pass @option{-o backing_fmt=} (or +shorthand @option{-F}) to specify the intended backing format. You +may use @command{qemu-img rebase -u} to retroactively add a backing +format to an existing image.
I'd add a note for users who wish to fix existing images (and I need to add it to libvirt's knowledge base too) that when the user is unsure of the backing image format and desn't trust that the image was handled in a trusted way, they must not use the format detected by qemu-img info if the image specifies a backing file, unless they also trust the backing file. (Sorry as a non-native English speaker I can't express this in a more elegant way.).
Quoted 3 lines
qemu-deprecated.texi +0
-0@subsection qemu-img convert -n -o (since 4.2.0) All options specified in @option{-o} are image creation options, so
[...]
Quoted 5 lines
qemu-img.c +0
-0
qemu-img.c static int img_rebase(int argc, char **argv) · line 3644
Quoted 9 lines
qemu-img.c +5
-1@@ -3637,7 +3637,13 @@ static int img_rebase(int argc, char **argv)* doesn't change when we switch the backing file. */ if (out_baseimg && *out_baseimg) { - ret =bdrv_change_backing_file (bs, out_baseimg, out_basefmt, false); +if (blk_new_backing && !out_basefmt) { + out_basefmt =blk_bs (blk_new_backing)->drv->format_name; +warn_report ("Deprecated use of backing file " +"without explicit backing format, using " +"detected format of %s" , out_basefmt);
Isn't this a similar instance to what I've reported in the previous version? You warn that the format is missing, but set out_basefmt to the detected format , thus bdrv_change_backing_file will then write the detected format into the overlay even when it previously did not?
I think this has to have the same check for raw-only as above.
qemu-img.c static int img_rebase(int argc, char **argv) · line 3646
Quoted 2 lines
qemu-img.c +2
-0+ } + ret =bdrv_change_backing_file (bs, out_baseimg, out_basefmt, true);
or just the above line.
qemu-img.c static int img_rebase(int argc, char **argv) · line 3649
Quoted 3 lines
qemu-img.c +0
-0}else { ret =bdrv_change_backing_file (bs,NULL ,NULL , false); }
I feel that this deprecation will be at least partially controversial, but in my opinion it's the correct thing to do.
after you address the issue above.
Re: [PATCH v2 3/3] qemu-img: Deprecate use of -b without -F
Quoted 34 lines · Peter Krempa
Quoted 33 lines · Eric Blake
Creating an image that requires format probing of the backing image is inherently unsafe (we've had several CVEs over the years based on probes leaking information to the guest on a subsequent boot). If our probing algorithm ever changes, or if other tools like libvirt determine a different probe result than we do, then subsequent use of that backing file under a different format will present corrupted data to the guest. Start a deprecation clock so that future qemu-img can refuse to create unsafe backing chains that would rely on probing.
However, there is one time where probing is safe: if we probe raw, then it is safe to record that implicitly in the image (but we still warn, as it's better to teach the user to supply -F always than to make them guess when it is safe).
iotest 114 specifically wants to create an unsafe image for later amendment rather than defaulting to our new default of recording a probed format, so it needs an update.
Signed-off-by Eric Blake <[email protected]>--- qemu-deprecated.texi | 15 +++++++++++++++ block.c | 21 ++++++++++++++++++++- qemu-img.c | 8 +++++++- tests/qemu-iotests/114 | 4 ++-- tests/qemu-iotests/114.out | 1 + 5 files changed, 45 insertions(+), 4 deletions(-)qemu-deprecated.texi +0
-0@@ -309,6 +309,21 @@ The above, converted to the current supported format:
Quoted 9 lines
qemu-deprecated.texi The above, converted to the current supported format: · line 315
Quoted 6 lines
qemu-deprecated.texi +4
-0@section Related binaries +@subsection qemu-img backing file without format (since 5.0.0) + +The use of @command{qemu-img create}, @command{qemu-img rebase}, +@command{qemu-img convert}, or @command{qemu-img ament} to create ors/ament/amend/
Fixing. (Do you ever wonder if I leave a typo in, just to check that reviewers were actually reviewing? But in this case, it was a symptom of me posting a series late at night to start the review process, even though I _really_ need to post a v3 that adds even more iotest coverage of every new deprecation warning made possible in this patch)
Quoted 11 lines
qemu-deprecated.texi The above, converted to the current supported format: · line 325
Quoted 10 lines
qemu-deprecated.texi +10
-0+modify an image that depends on a backing file now recommends that an +explicit backing format be provided. This is for safety - if qemu +probes a different format than what you thought, the data presented to +the guest will be corrupt; similarly, presenting a raw image to a +guest allows the guest a potential security exploit if a future probe +sees non-raw. To avoid warning messages, or even future refusal to +create an unsafe image, you must pass @option{-o backing_fmt=} (or +shorthand @option{-F}) to specify the intended backing format. You +may use @command{qemu-img rebase -u} to retroactively add a backing +format to an existing image.
Quoted 7 lines
I'd add a note for users who wish to fix existing images (and I need to add it to libvirt's knowledge base too) that when the user is unsure of the backing image format and desn't trust that the image was handled in a trusted way, they must not use the format detected by qemu-img info if the image specifies a backing file, unless they also trust the backing file. (Sorry as a non-native English speaker I can't express this in a more elegant way.).
Good idea. How about:
...to retroactively add a backing format to an existing image. However, be aware that there are already potential security risks to using 'qemu-img info' to probe the format of an untrusted backing image, when deciding what format to write into an image with 'qemu-img rebase -u'.
Quoted 27 lines
Quoted 4 lines
qemu-deprecated.texi +0
-0@subsection qemu-img convert -n -o (since 4.2.0) All options specified in @option{-o} are image creation options, so[...]
Quoted 5 lines
qemu-img.c +0
-0qemu-img.c static int img_rebase(int argc, char **argv) · line 3644
Quoted 9 lines
qemu-img.c +5
-1@@ -3637,7 +3637,13 @@ static int img_rebase(int argc, char **argv)* doesn't change when we switch the backing file. */ if (out_baseimg && *out_baseimg) { - ret =bdrv_change_backing_file (bs, out_baseimg, out_basefmt, false); +if (blk_new_backing && !out_basefmt) { + out_basefmt =blk_bs (blk_new_backing)->drv->format_name; +warn_report ("Deprecated use of backing file " +"without explicit backing format, using " +"detected format of %s" , out_basefmt);Isn't this a similar instance to what I've reported in the previous version? You warn that the format is missing, but set
out_basefmtto the detected format , thusbdrv_change_backing_filewill then write the detected format into the overlay even when it previously did not?
Quoted 1 line
I think this has to have the same check for raw-only as above.
Yes, I think I missed a spot (blame the late-night push to get the patch out the door). I'll wait to see if I get review from the qemu side before posting v3, though.
Quoted 17 lines
qemu-img.c static int img_rebase(int argc, char **argv) · line 3646
Quoted 3 lines
qemu-img.c +2
-0+ } + ret =bdrv_change_backing_file (bs, out_baseimg, out_basefmt, true);or just the above line.
qemu-img.c static int img_rebase(int argc, char **argv) · line 3649
Quoted 3 lines
qemu-img.c +0
-0}else { ret =bdrv_change_backing_file (bs,NULL ,NULL , false); }I feel that this deprecation will be at least partially controversial, but in my opinion it's the correct thing to do.
Reviewed-by Peter Krempa <[email protected]>after you address the issue above.
Signature · 3 lines
Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3226 Virtualization: qemu.org | libvirt.org
Re: [PATCH v2 3/3] qemu-img: Deprecate use of -b without -F
In reply to Eric BlakeQuoted 18 lines · Eric Blake
Creating an image that requires format probing of the backing image is inherently unsafe (we've had several CVEs over the years based on probes leaking information to the guest on a subsequent boot). If our probing algorithm ever changes, or if other tools like libvirt determine a different probe result than we do, then subsequent use of that backing file under a different format will present corrupted data to the guest. Start a deprecation clock so that future qemu-img can refuse to create unsafe backing chains that would rely on probing.
However, there is one time where probing is safe: if we probe raw, then it is safe to record that implicitly in the image (but we still warn, as it's better to teach the user to supply -F always than to make them guess when it is safe).
iotest 114 specifically wants to create an unsafe image for later amendment rather than defaulting to our new default of recording a probed format, so it needs an update.
Quoted 9 lines
Signed-off-by Eric Blake <[email protected]>---
qemu-deprecated.texi | 15 +++++++++++++++ block.c | 21 ++++++++++++++++++++- qemu-img.c | 8 +++++++- tests/qemu-iotests/114 | 4 ++-- tests/qemu-iotests/114.out | 1 + 5 files changed, 45 insertions(+), 4 deletions(-)
This seems to affect code paths that are used even outside of qemu-img, should the commit message mention it?
Jano