Cleanup dtbs_check warnings for tsens

PATCH Superseded Amit Kucheria 3 participants 9 messages Feb 26, 2020 – Feb 28, 2020

Subsystems (5)

Device tree bindings Arm Qualcomm mailing list Arm Qualcomm support Thermal +1 more subsystems

lore

Share & tools

lore

Amit Kucheria

author

2020-02-26 11:58 UTC #0 lore raw

v3 cover Cleanup dtbs_check warnings for tsens

Make dtbs_check pass for tsens bits. I'm working on another series to cleanup other DT warnings for QC platforms.

Amit Kucheria (3):
dt-bindings: thermal: tsens: Add entry for sc7180 tsens to binding
dt-bindings: thermal: tsens: Add qcom,tsens-v0_1 to msm8916.dtsi
compatible
dt-bindings: thermal: tsens: Add qcom,tsens-v2 to msm8996.dtsi
compatible

 Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
 arch/arm64/boot/dts/qcom/msm8916.dtsi                     | 2 +-
 arch/arm64/boot/dts/qcom/msm8996.dtsi                     | 4 ++--
 3 files changed, 4 insertions(+), 3 deletions(-)

Signature · 1 line

2.20.1

Amit Kucheria

author

2020-02-26 11:58 UTC #1 lore raw

PATCH v3 1/3 dt-bindings: thermal: tsens: Add entry for sc7180 tsens to binding

The qcom-tsens binding requires a SoC-specific and a TSENS family-specific binding to be specified in the compatible string.

Since qcom,sc7180-tsens is not listed in the YAML binding, we see the following warnings in 'make dtbs_check'. Fix them.

builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible: ['qcom,sc7180-tsens', 'qcom,tsens-v2'] is not valid under any of the given schemas (Possible causes of the failure):
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of ['qcom,msm8916-tsens', 'qcom,msm8974-tsens'] builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of ['qcom,msm8976-tsens', 'qcom,qcs404-tsens'] builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of ['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens'] builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:1: 'qcom,tsens-v0_1' was expected builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:1: 'qcom,tsens-v1' was expected

builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible: ['qcom,sc7180-tsens', 'qcom,tsens-v2'] is not valid under any of the given schemas (Possible causes of the failure):
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of ['qcom,msm8916-tsens', 'qcom,msm8974-tsens'] builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of ['qcom,msm8976-tsens', 'qcom,qcs404-tsens'] builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of ['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens'] builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:1: 'qcom,tsens-v0_1' was expected builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:1: 'qcom,tsens-v1' was expected

Signed-off-by Amit Kucheria <[email protected]>

Reviewed-by Vinod Koul <[email protected]>

---
 Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
 1 file changed, 1 insertion(+)

Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +1 -0

index eef13b9446a8..13e294328932 100644
@@ -39,6 +39,7 @@ properties:
               - qcom,msm8996-tsens
               - qcom,msm8998-tsens
               - qcom,sdm845-tsens
+              - qcom,sc7180-tsens
           - const: qcom,tsens-v2
 
   reg:

Signature · 1 line

2.20.1

Amit Kucheria

author

2020-02-26 11:58 UTC #2 lore raw

PATCH v3 2/3 dt-bindings: thermal: tsens: Add qcom,tsens-v0_1 to msm8916.dtsi compatible

In reply to Amit Kucheria

The qcom-tsens binding requires a SoC-specific and a TSENS family-specific binding to be specified in the compatible string.

Since them family-specific binding is not listed in the .dtsi file, we see the following warnings in 'make dtbs_check'. Fix them.

/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
thermal-sensor@4a9000: compatible: ['qcom,msm8916-tsens'] is not valid under any of the given schemas (Possible causes of the failure):
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
thermal-sensor@4a9000: compatible: ['qcom,msm8916-tsens'] is too short /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
thermal-sensor@4a9000: compatible:0: 'qcom,msm8916-tsens' is not one of ['qcom,msm8976-tsens', 'qcom,qcs404-tsens'] /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
thermal-sensor@4a9000: compatible:0: 'qcom,msm8916-tsens' is not one of ['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']

Signed-off-by Amit Kucheria <[email protected]>

---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

arch/arm64/boot/dts/qcom/msm8916.dtsi +1 -1

index 9f31064f2374..1748ea3f4b4f 100644
@@ -860,7 +860,7 @@
 		};
 
 		tsens: thermal-sensor@4a9000 {
-			compatible = "qcom,msm8916-tsens";
+			compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
 			reg = <0x4a9000 0x1000>, /* TM */
 			      <0x4a8000 0x1000>; /* SROT */
 			nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;

Signature · 1 line

2.20.1

Vinod Koul

Reviewed-by on v3 2/3

2020-02-26 16:00 UTC #3 lore raw

Re: [PATCH v3 2/3] dt-bindings: thermal: tsens: Add qcom,tsens-v0_1 to msm8916.dtsi compatible

Quoted 6 lines · Amit Kucheria

The qcom-tsens binding requires a SoC-specific and a TSENS family-specific binding to be specified in the compatible string.
Since them family-specific binding is not listed in the .dtsi file, we see the following warnings in 'make dtbs_check'. Fix them.

Quoted 11 lines

/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
thermal-sensor@4a9000: compatible: ['qcom,msm8916-tsens'] is not valid under any of the given schemas (Possible causes of the failure):
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
thermal-sensor@4a9000: compatible: ['qcom,msm8916-tsens'] is too short /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
thermal-sensor@4a9000: compatible:0: 'qcom,msm8916-tsens' is not one of ['qcom,msm8976-tsens', 'qcom,qcs404-tsens'] /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
thermal-sensor@4a9000: compatible:0: 'qcom,msm8916-tsens' is not one of ['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']

Reviewed-by Vinod Koul <[email protected]>

Quoted 21 lines

Signed-off-by Amit Kucheria <[email protected]>

---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

arch/arm64/boot/dts/qcom/msm8916.dtsi +1 -1

index 9f31064f2374..1748ea3f4b4f 100644
@@ -860,7 +860,7 @@
 		};
 
 		tsens: thermal-sensor@4a9000 {
-			compatible = "qcom,msm8916-tsens";
+			compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
 			reg = <0x4a9000 0x1000>, /* TM */
 			      <0x4a8000 0x1000>; /* SROT */
 			nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;

Signature · 1 line

2.20.1

Signature · 1 line

~Vinod

Bjorn Andersson

2020-02-28 03:21 UTC #4 lore raw

Re: [PATCH v3 2/3] dt-bindings: thermal: tsens: Add qcom,tsens-v0_1 to msm8916.dtsi compatible

In reply to Amit Kucheria

On Wed 26 Feb 01:31 PST 2020, Amit Kucheria wrote:

$subject should be "arm64: dts: qcom: msm8916: ..."

Apart from that this looks good.

Regards,
Bjorn

Quoted 39 lines

The qcom-tsens binding requires a SoC-specific and a TSENS family-specific binding to be specified in the compatible string.
Since them family-specific binding is not listed in the .dtsi file, we see the following warnings in 'make dtbs_check'. Fix them.
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
thermal-sensor@4a9000: compatible: ['qcom,msm8916-tsens'] is not valid under any of the given schemas (Possible causes of the failure):
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
thermal-sensor@4a9000: compatible: ['qcom,msm8916-tsens'] is too short /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
thermal-sensor@4a9000: compatible:0: 'qcom,msm8916-tsens' is not one of ['qcom,msm8976-tsens', 'qcom,qcs404-tsens'] /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
thermal-sensor@4a9000: compatible:0: 'qcom,msm8916-tsens' is not one of ['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']
Signed-off-by Amit Kucheria <[email protected]>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/qcom/msm8916.dtsi +1 -1
index 9f31064f2374..1748ea3f4b4f 100644
@@ -860,7 +860,7 @@
 		};
 
 		tsens: thermal-sensor@4a9000 {
-			compatible = "qcom,msm8916-tsens";
+			compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
 			reg = <0x4a9000 0x1000>, /* TM */
 			      <0x4a8000 0x1000>; /* SROT */
 			nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
Signature · 1 line
2.20.1

Amit Kucheria

author

2020-02-26 11:58 UTC #5 lore raw

PATCH v3 3/3 dt-bindings: thermal: tsens: Add qcom,tsens-v2 to msm8996.dtsi compatible

In reply to Amit Kucheria

The qcom-tsens binding requires a SoC-specific and a TSENS family-specific binding to be specified in the compatible string.

Since them family-specific binding is not listed in the .dtsi file, we see the following warnings in 'make dtbs_check'. Fix them.

/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4a9000: compatible: ['qcom,msm8996-tsens'] is not valid under any of the given schemas (Possible causes of the failure):
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4a9000: compatible: ['qcom,msm8996-tsens'] is too short /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4a9000: compatible:0: 'qcom,msm8996-tsens' is not one of ['qcom,msm8916-tsens', 'qcom,msm8974-tsens'] /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4a9000: compatible:0: 'qcom,msm8996-tsens' is not one of ['qcom,msm8976-tsens', 'qcom,qcs404-tsens']

/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4ad000: compatible: ['qcom,msm8996-tsens'] is not valid under any of the given schemas (Possible causes of the failure):
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4ad000: compatible: ['qcom,msm8996-tsens'] is too short /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4ad000: compatible:0: 'qcom,msm8996-tsens' is not one of ['qcom,msm8916-tsens', 'qcom,msm8974-tsens'] /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4ad000: compatible:0: 'qcom,msm8996-tsens' is not one of ['qcom,msm8976-tsens', 'qcom,qcs404-tsens']

Signed-off-by Amit Kucheria <[email protected]>

---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

arch/arm64/boot/dts/qcom/msm8996.dtsi +2 -2

index 7ae082ea14ea..f157cd4f53b4 100644
@@ -446,7 +446,7 @@
 		};
 
 		tsens0: thermal-sensor@4a9000 {
-			compatible = "qcom,msm8996-tsens";
+			compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
 			reg = <0x004a9000 0x1000>, /* TM */
 			      <0x004a8000 0x1000>; /* SROT */
 			#qcom,sensors = <13>;

@@ -457,7 +457,7 @@
 		};
 
 		tsens1: thermal-sensor@4ad000 {
-			compatible = "qcom,msm8996-tsens";
+			compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
 			reg = <0x004ad000 0x1000>, /* TM */
 			      <0x004ac000 0x1000>; /* SROT */
 			#qcom,sensors = <8>;

Signature · 1 line

2.20.1

Vinod Koul

Reviewed-by on v3 3/3

2020-02-26 15:58 UTC #6 lore raw

Re: [PATCH v3 3/3] dt-bindings: thermal: tsens: Add qcom,tsens-v2 to msm8996.dtsi compatible

Quoted 18 lines · Amit Kucheria

The qcom-tsens binding requires a SoC-specific and a TSENS family-specific binding to be specified in the compatible string.
Since them family-specific binding is not listed in the .dtsi file, we see the following warnings in 'make dtbs_check'. Fix them.
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4a9000: compatible: ['qcom,msm8996-tsens'] is not valid under any of the given schemas (Possible causes of the failure):
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4a9000: compatible: ['qcom,msm8996-tsens'] is too short /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4a9000: compatible:0: 'qcom,msm8996-tsens' is not one of ['qcom,msm8916-tsens', 'qcom,msm8974-tsens'] /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4a9000: compatible:0: 'qcom,msm8996-tsens' is not one of ['qcom,msm8976-tsens', 'qcom,qcs404-tsens']

Quoted 11 lines

/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4ad000: compatible: ['qcom,msm8996-tsens'] is not valid under any of the given schemas (Possible causes of the failure):
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4ad000: compatible: ['qcom,msm8996-tsens'] is too short /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4ad000: compatible:0: 'qcom,msm8996-tsens' is not one of ['qcom,msm8916-tsens', 'qcom,msm8974-tsens'] /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4ad000: compatible:0: 'qcom,msm8996-tsens' is not one of ['qcom,msm8976-tsens', 'qcom,qcs404-tsens']

Reviewed-by Vinod Koul <[email protected]>

Quoted 30 lines

Signed-off-by Amit Kucheria <[email protected]>

---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

arch/arm64/boot/dts/qcom/msm8996.dtsi +2 -2

index 7ae082ea14ea..f157cd4f53b4 100644
@@ -446,7 +446,7 @@
 		};
 
 		tsens0: thermal-sensor@4a9000 {
-			compatible = "qcom,msm8996-tsens";
+			compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
 			reg = <0x004a9000 0x1000>, /* TM */
 			      <0x004a8000 0x1000>; /* SROT */
 			#qcom,sensors = <13>;

@@ -457,7 +457,7 @@
 		};
 
 		tsens1: thermal-sensor@4ad000 {
-			compatible = "qcom,msm8996-tsens";
+			compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
 			reg = <0x004ad000 0x1000>, /* TM */
 			      <0x004ac000 0x1000>; /* SROT */
 			#qcom,sensors = <8>;

Signature · 1 line

2.20.1

Signature · 1 line

~Vinod

Vinod Koul

Reviewed-by on v3 3/3

2020-02-26 15:58 UTC #7 lore raw

Re: [PATCH v3 3/3] dt-bindings: thermal: tsens: Add qcom,tsens-v2 to msm8996.dtsi compatible

In reply to Amit Kucheria

Quoted 18 lines · Amit Kucheria

The qcom-tsens binding requires a SoC-specific and a TSENS family-specific binding to be specified in the compatible string.
Since them family-specific binding is not listed in the .dtsi file, we see the following warnings in 'make dtbs_check'. Fix them.
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4a9000: compatible: ['qcom,msm8996-tsens'] is not valid under any of the given schemas (Possible causes of the failure):
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4a9000: compatible: ['qcom,msm8996-tsens'] is too short /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4a9000: compatible:0: 'qcom,msm8996-tsens' is not one of ['qcom,msm8916-tsens', 'qcom,msm8974-tsens'] /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4a9000: compatible:0: 'qcom,msm8996-tsens' is not one of ['qcom,msm8976-tsens', 'qcom,qcs404-tsens']

Quoted 11 lines

/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4ad000: compatible: ['qcom,msm8996-tsens'] is not valid under any of the given schemas (Possible causes of the failure):
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4ad000: compatible: ['qcom,msm8996-tsens'] is too short /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4ad000: compatible:0: 'qcom,msm8996-tsens' is not one of ['qcom,msm8916-tsens', 'qcom,msm8974-tsens'] /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4ad000: compatible:0: 'qcom,msm8996-tsens' is not one of ['qcom,msm8976-tsens', 'qcom,qcs404-tsens']

Reviewed-by Vinod Koul <[email protected]>

Quoted 30 lines

Signed-off-by Amit Kucheria <[email protected]>

---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

arch/arm64/boot/dts/qcom/msm8996.dtsi +2 -2

index 7ae082ea14ea..f157cd4f53b4 100644
@@ -446,7 +446,7 @@
 		};
 
 		tsens0: thermal-sensor@4a9000 {
-			compatible = "qcom,msm8996-tsens";
+			compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
 			reg = <0x004a9000 0x1000>, /* TM */
 			      <0x004a8000 0x1000>; /* SROT */
 			#qcom,sensors = <13>;

@@ -457,7 +457,7 @@
 		};
 
 		tsens1: thermal-sensor@4ad000 {
-			compatible = "qcom,msm8996-tsens";
+			compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
 			reg = <0x004ad000 0x1000>, /* TM */
 			      <0x004ac000 0x1000>; /* SROT */
 			#qcom,sensors = <8>;

Signature · 1 line

2.20.1

Signature · 1 line

~Vinod

Bjorn Andersson

2020-02-28 03:24 UTC #8 lore raw

Re: [PATCH v3 3/3] dt-bindings: thermal: tsens: Add qcom,tsens-v2 to msm8996.dtsi compatible

In reply to Amit Kucheria

On Wed 26 Feb 01:31 PST 2020, Amit Kucheria wrote:

As with patch 2, $subject should have an appropriate prefix. Please update this.

Regards,
Bjorn

Quoted 60 lines

The qcom-tsens binding requires a SoC-specific and a TSENS family-specific binding to be specified in the compatible string.
Since them family-specific binding is not listed in the .dtsi file, we see the following warnings in 'make dtbs_check'. Fix them.
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4a9000: compatible: ['qcom,msm8996-tsens'] is not valid under any of the given schemas (Possible causes of the failure):
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4a9000: compatible: ['qcom,msm8996-tsens'] is too short /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4a9000: compatible:0: 'qcom,msm8996-tsens' is not one of ['qcom,msm8916-tsens', 'qcom,msm8974-tsens'] /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4a9000: compatible:0: 'qcom,msm8996-tsens' is not one of ['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4ad000: compatible: ['qcom,msm8996-tsens'] is not valid under any of the given schemas (Possible causes of the failure):
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4ad000: compatible: ['qcom,msm8996-tsens'] is too short /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4ad000: compatible:0: 'qcom,msm8996-tsens' is not one of ['qcom,msm8916-tsens', 'qcom,msm8974-tsens'] /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4ad000: compatible:0: 'qcom,msm8996-tsens' is not one of ['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
Signed-off-by Amit Kucheria <[email protected]>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/qcom/msm8996.dtsi +2 -2
index 7ae082ea14ea..f157cd4f53b4 100644
@@ -446,7 +446,7 @@
 		};
 
 		tsens0: thermal-sensor@4a9000 {
-			compatible = "qcom,msm8996-tsens";
+			compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
 			reg = <0x004a9000 0x1000>, /* TM */
 			      <0x004a8000 0x1000>; /* SROT */
 			#qcom,sensors = <13>;
@@ -457,7 +457,7 @@
 		};
 
 		tsens1: thermal-sensor@4ad000 {
-			compatible = "qcom,msm8996-tsens";
+			compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
 			reg = <0x004ad000 0x1000>, /* TM */
 			      <0x004ac000 0x1000>; /* SROT */
 			#qcom,sensors = <8>;
Signature · 1 line
2.20.1