Add full support for cloning inline extents
v4 cover Add full support for cloning inline extents
From: Filipe Manana <[email protected]>
This patchset adds support for currently unsupported cases of reflink operations that cover a file range that has inline extents, more details on why/how in patch 3/3.
It also starts by moving all the reflink code out of ioctl.c into a new file named reflink.c (like xfs does) since this code is quite significant in size and has grown over the years.
V4: Updated patch 3 to fix a deadlock due to allocating space while holding
a transaction open. No changes to the first two patches.
V3: Updated first patch to introduce reflink.h as well, besides reflink.c.
V2: Removed third patch from the previous patchset version. Since the full
page ends up getting written, it's not necessary to read it before writing to it in case it's not uptodate. The final patch, which is now patch number 3, ends up being simpler as well.
Filipe Manana (3):
Btrfs: move all reflink implementation code into its own file
Btrfs: simplify inline extent handling when doing reflinks
Btrfs: implement full reflink support for inline extents
fs/btrfs/Makefile | 2 +- fs/btrfs/ctree.h | 3 - fs/btrfs/file.c | 1 + fs/btrfs/ioctl.c | 733 ----------------------------------------------- fs/btrfs/reflink.c | 811 +++++++++++++++++++++++++++++++++++++++++++++++++++++ fs/btrfs/reflink.h | 12 + 6 files changed, 825 insertions(+), 737 deletions(-) create mode 100644 fs/btrfs/reflink.c create mode 100644 fs/btrfs/reflink.h
Signature · 1 line
2.11.0
PATCH v4 1/3 Btrfs: move all reflink implementation code into its own file
From: Filipe Manana <[email protected]>
The reflink code is quite large and has been living in ioctl.c since ever. It has grown over the years after many bug fixes and improvements, and since I'm planning on making some further improvements on it, it's time to get it better organized by moving into its own file, reflink.c (similar to what xfs does for example).
This change only moves the code out of ioctl.c into the new file, it doesn't do any other change.
---
V4: No changes.
V3: Introduced reflink.h
V2: No changes.
fs/btrfs/Makefile | 2 +- fs/btrfs/ctree.h | 3 - fs/btrfs/file.c | 1 + fs/btrfs/ioctl.c | 733 ---------------------------------------------------- fs/btrfs/reflink.c | 736 +++++++++++++++++++++++++++++++++++++++++++++++++++++ fs/btrfs/reflink.h | 12 + 6 files changed, 750 insertions(+), 737 deletions(-) create mode 100644 fs/btrfs/reflink.c create mode 100644 fs/btrfs/reflink.h
fs/btrfs/Makefile +1 -1
@@ -11,7 +11,7 @@ btrfs-y += super.o ctree.o extent-tree.o print-tree.o root-tree.o dir-item.o \ compression.o delayed-ref.o relocation.o delayed-inode.o scrub.o \ reada.o backref.o ulist.o qgroup.o send.o dev-replace.o raid56.o \ uuid-tree.o props.o free-space-tree.o tree-checker.o space-info.o \ - block-rsv.o delalloc-space.o block-group.o discard.o + block-rsv.o delalloc-space.o block-group.o discard.o reflink.o btrfs-$(CONFIG_BTRFS_FS_POSIX_ACL) += acl.o btrfs-$(CONFIG_BTRFS_FS_CHECK_INTEGRITY) += check-integrity.o
fs/btrfs/ctree.h +0 -3
@@ -2989,9 +2989,6 @@ int btrfs_dirty_pages(struct inode *inode, struct page **pages, size_t num_pages, loff_t pos, size_t write_bytes, struct extent_state **cached);int btrfs_fdatawrite_range (struct inode *inode,loff_t start,loff_t end); -loff_t btrfs_remap_file_range (struct file *file_in,loff_t pos_in, -struct file *file_out,loff_t pos_out, -loff_t len,unsigned int remap_flags);/* tree-defrag.c */ int btrfs_defrag_leaves(struct btrfs_trans_handle *trans,
fs/btrfs/file.c +1 -0
@@ -27,6 +27,7 @@#include "qgroup.h" #include "compression.h" #include "delalloc-space.h" +#include "reflink.h" static struct kmem_cache *btrfs_inode_defrag_cachep;/*
fs/btrfs/ioctl.c +0 -733
745 lines not on this page · raw message
fs/btrfs/reflink.c new file +736 -0
736 lines not on this page · raw message
fs/btrfs/reflink.h new file +12 -0
@@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef BTRFS_REFLINK_H +#define BTRFS_REFLINK_H + +#include <linux/fs.h> + +loff_t btrfs_remap_file_range (struct file *file_in,loff_t pos_in, +struct file *file_out,loff_t pos_out, +loff_t len,unsigned int remap_flags); + +#endif /* BTRFS_REFLINK_H */
Signature · 1 line
2.11.0
PATCH v4 2/3 Btrfs: simplify inline extent handling when doing reflinks
In reply to [email protected]From: Filipe Manana <[email protected]>
We can not reflink parts of an inline extent, we must always reflink the whole inline extent. We know that inline extents always start at file offset 0 and that can never represent an amount of data larger then the filesystem's sector size (both compressed and uncompressed). We also have had the constraints that reflink operations must have a start offset that is aligned to the sector size and an end offset that is also aligned or it ends the inode's i_size, so there's no way for user space to be able to do a reflink operation that will refer to only a part of an inline extent.
Initially there was a bug in the inlining code that could allow compressed inline extents that encoded more than 1 page, but that was fixed in 2008 by commit 70b99e6959a4c2 ("Btrfs: Compression corner fixes") since that was problematic.
So remove all the extent cloning code that deals with the possibility of cloning only partial inline extents.
---
V4: No changes.
V3: No changes.
V2: No changes.
fs/btrfs/reflink.c | 53 ++++++++++++++--------------------------------------- 1 file changed, 14 insertions(+), 39 deletions(-)
fs/btrfs/reflink.c +14 -39
@@ -74,9 +74,8 @@ static int clone_copy_inline_extent(struct inode *dst,struct btrfs_key *new_key, const u64 drop_start, const u64 datal, - const u64 skip, const u64 size, - char *inline_data) + const char *inline_data) { struct btrfs_fs_info *fs_info = btrfs_sb(dst->i_sb);struct btrfs_root *root =BTRFS_I (dst)->root;
@@ -172,12 +171,6 @@ static int clone_copy_inline_extent(struct inode *dst,if (ret)return ret; -if (skip) { -const u32 start =btrfs_file_extent_calc_inline_size (0 ); - -memmove (inline_data + start, inline_data + start + skip, datal); - } - write_extent_buffer(path->nodes[0], inline_data, btrfs_item_ptr_offset(path->nodes[0], path->slots[0]),
@@ -241,7 +234,6 @@ static int btrfs_clone(struct inode *src, struct inode *inode,struct btrfs_key new_key;u64 disko =0 , diskl =0 ;u64 datao =0 , datal =0 ; -u8 comp;u64 drop_start;/*
@@ -287,7 +279,6 @@ static int btrfs_clone(struct inode *src, struct inode *inode, extent =btrfs_item_ptr (leaf, slot, struct btrfs_file_extent_item); - comp =btrfs_file_extent_compression (leaf, extent); type =btrfs_file_extent_type (leaf, extent);if (type ==BTRFS_FILE_EXTENT_REG || type ==BTRFS_FILE_EXTENT_PREALLOC ) {
@@ -370,23 +361,18 @@ static int btrfs_clone(struct inode *src, struct inode *inode,if (ret) goto out; }else if (type ==BTRFS_FILE_EXTENT_INLINE ) { -u64 skip =0 ; -u64 trim =0 ; - -if (off > key.offset) { - skip = off - key.offset; - new_key.offset += skip; - } - -if (key.offset + datal > off + len) - trim = key.offset + datal - (off + len); - -if (comp && (skip || trim)) { - ret = -EINVAL ; - goto out; - } - size -= skip + trim; - datal -= skip + trim; +/* +* Inline extents always have to start at file offset 0 +* and can never be bigger then the sector size. We can +* never clone only parts of an inline extent, since all +* reflink operations must start at a sector size aligned +* offset, and the length must be aligned too or end at +* the i_size (which implies the whole inlined data). +*/ +ASSERT (key.offset ==0 ); +ASSERT (datal <= fs_info->sectorsize); +if (key.offset !=0 || datal > fs_info->sectorsize) +return -EUCLEAN ;/* * If our extent is inline, we know we will drop or
@@ -404,7 +390,7 @@ static int btrfs_clone(struct inode *src, struct inode *inode, ret =clone_copy_inline_extent (inode, trans, path, &new_key, drop_start, - datal, skip, size, buf); + datal, size, buf);if (ret) {if (ret != -EOPNOTSUPP )btrfs_abort_transaction (trans, ret);
@@ -551,17 +537,6 @@ static noinline int btrfs_clone_files(struct file *file, struct file *file_src,u64 bs = fs_info->sb->s_blocksize;/* -* TODO: -* - split compressed inline extents. annoying: we need to -* decompress into destination's address_space (the file offset -* may change, so source mapping won't do), then recompress (or -* otherwise reinsert) a subrange. -* -* - split destination inode's inline extents. The inline extents can -* be either compressed or non-compressed. -*/ - -/* * VFS's generic_remap_file_range_prep() protects us from cloning the * eof block into the middle of a file, which would result in corruption * if the file size is not blocksize aligned. So we don't need to check
Signature · 1 line
2.11.0
PATCH v4 3/3 Btrfs: implement full reflink support for inline extents
In reply to [email protected]From: Filipe Manana <[email protected]>
There are a few cases where we don't allow cloning an inline extent into the destination inode, returning -EOPNOTSUPP to user space. This was done to prevent several types of file corruption and because it's not very straightforward to deal with these cases, as they can't rely on simply copying the inline extent between leaves. Such cases require copying the inline extent's data into the respective page of the destination inode.
Not supporting these cases makes it harder and more cumbersome to write applications/libraries that work on any filesystem with reflink support, since all these cases for which btrfs fails with -EOPNOTSUPP work just fine on xfs for example. These unsupported cases are also not documented anywhere and explaining which exact cases fail require a bit of too technical understanding of btrfs's internal (inline extents and when and where can they exist in a file), so it's not really user friendly.
Also some test cases from fstests that use fsx, such as generic/522 for example, can sporadically fail because they trigger one of these cases, and fsx expects all operations to succeed.
This change adds supports for cloning all these cases by copying the inline extent's data into the respective page of the destination inode.
With this change test case btrfs/112 from fstests fails because it expects some clone operations to fail, so it will be updated. Also a new test case that exercises all these previously unsupported cases will be added to fstests.
---
V4: Updated to fix a deadlock due to allocating space while holding a
transaction open..
V3: No changes.
V2: Simplified to not read the page if it's not uptodate, since we
overwrite the whole page content, there's no need to read it if it's not uptodate. Just write to it and set it up uptodate after.
fs/btrfs/reflink.c | 274 ++++++++++++++++++++++++++++++++++++----------------- 1 file changed, 187 insertions(+), 87 deletions(-)
fs/btrfs/reflink.c +187 -87
@@ -1,7 +1,10 @@// SPDX-License-Identifier: GPL-2.0 +#include <linux/blkdev.h> #include <linux/iversion.h> +#include "compression.h" #include "ctree.h" +#include "delalloc-space.h" #include "reflink.h" #include "transaction.h"
@@ -43,49 +46,131 @@ static int clone_finish_inode_update(struct btrfs_trans_handle *trans,return ret; } +static int copy_inline_to_page (struct inode *inode, +const u64 file_offset, +char *inline_data, +const u64 size, +const u64 datal, +const u8 comp_type) +{ +const u64 block_size =btrfs_inode_sectorsize (inode); +const u64 range_end = file_offset + block_size -1 ; +const size_t inline_size = size -btrfs_file_extent_calc_inline_size (0 ); +char *data_start = inline_data +btrfs_file_extent_calc_inline_size (0 ); +struct extent_changeset *data_reserved =NULL ; +struct page *page =NULL ; +int ret; + +ASSERT (IS_ALIGNED (file_offset, block_size)); + +/* +* We have flushed and locked the ranges of the source and destination +* inodes, we also have locked the inodes, so we are safe to do a +* reservation here. Also we must not do the reservation while holding +* a transaction open, otherwise we would deadlock. +*/ + ret =btrfs_delalloc_reserve_space (inode, &data_reserved, file_offset, + block_size); +if (ret) + goto out; + + page =find_or_create_page (inode->i_mapping, file_offset >>PAGE_SHIFT , +btrfs_alloc_write_mask (inode->i_mapping)); +if (!page) { + ret = -ENOMEM ; + goto out_unlock; + } + +set_page_extent_mapped (page); +clear_extent_bit (&BTRFS_I (inode)->io_tree, file_offset, range_end, +EXTENT_DELALLOC |EXTENT_DO_ACCOUNTING |EXTENT_DEFRAG , +0 ,0 ,NULL ); + ret =btrfs_set_extent_delalloc (inode, file_offset, range_end,0 ,NULL ); +if (ret) + goto out_unlock; + +if (comp_type ==BTRFS_COMPRESS_NONE ) { +char *map; + + map =kmap (page); +memcpy (map, data_start, datal); +flush_dcache_page (page); +kunmap (page); + }else { + ret =btrfs_decompress (comp_type, data_start, page,0 , + inline_size, datal); +if (ret) + goto out_unlock; +flush_dcache_page (page); + } + +/* +* If our inline data is smaller then the block/page size, then the +* remaining of the block/page is equivalent to zeroes. We had something +* like the following done: +* +* $ xfs_io -f -c "pwrite -S 0xab 0 500" file +* $ sync # (or fsync) +* $ xfs_io -c "falloc 0 4K" file +* $ xfs_io -c "pwrite -S 0xcd 4K 4K" +* +* So what's in the range [500, 4095] corresponds to zeroes. +*/ +if (datal < block_size) { +char *map; + + map =kmap (page); +memset (map + datal,0 , block_size - datal); +flush_dcache_page (page); +kunmap (page); + } + +SetPageUptodate (page); +ClearPageChecked (page); +set_page_dirty (page); +out_unlock: +if (page) { +unlock_page (page); +put_page (page); + } +if (ret) +btrfs_delalloc_release_space (inode, data_reserved, file_offset, + block_size, true); +btrfs_delalloc_release_extents (BTRFS_I (inode), block_size); +out: +extent_changeset_free (data_reserved); + +return ret; +} +/* -* Make sure we do not end up inserting an inline extent into a file that has -* already other (non-inline) extents. If a file has an inline extent it can -* not have any other extents and the (single) inline extent must start at the -* file offset 0. Failing to respect these rules will lead to file corruption, -* resulting in EIO errors on read/write operations, hitting BUG_ON's in mm, etc -* -* We can have extents that have been already written to disk or we can have -* dirty ranges still in delalloc, in which case the extent maps and items are -* created only when we run delalloc, and the delalloc ranges might fall outside -* the range we are currently locking in the inode's io tree. So we check the -* inode's i_size because of that (i_size updates are done while holding the -* i_mutex, which we are holding here). -* We also check to see if the inode has a size not greater than "datal" but has -* extents beyond it, due to an fallocate with FALLOC_FL_KEEP_SIZE (and we are -* protected against such concurrent fallocate calls by the i_mutex). -* -* If the file has no extents but a size greater than datal, do not allow the -* copy because we would need turn the inline extent into a non-inline one (even -* with NO_HOLES enabled). If we find our destination inode only has one inline -* extent, just overwrite it with the source inline extent if its size is less -* than the source extent's size, or we could copy the source inline extent's -* data into the destination inode's inline extent if the later is greater then -* the former. +* Deal with cloning of inline extents. We try to copy the inline extent from +* the source inode to destination inode when possible. When not possible we +* copy the inline extent's data into the respective page of the inode. */ static int clone_copy_inline_extent (struct inode *dst, -struct btrfs_trans_handle *trans,struct btrfs_path *path,struct btrfs_key *new_key,const u64 drop_start,const u64 datal,const u64 size, -const char *inline_data) +const u8 comp_type, +char *inline_data, +struct btrfs_trans_handle **trans_out) {struct btrfs_fs_info *fs_info =btrfs_sb (dst->i_sb);struct btrfs_root *root =BTRFS_I (dst)->root;const u64 aligned_end =ALIGN (new_key->offset + datal, fs_info->sectorsize); +struct btrfs_trans_handle *trans =NULL ;int ret;struct btrfs_key key; -if (new_key->offset >0 ) -return -EOPNOTSUPP ; +if (new_key->offset >0 ) { + ret =copy_inline_to_page (dst, new_key->offset, inline_data, + size, datal, comp_type); + goto out; + } key.objectid =btrfs_ino (BTRFS_I (dst)); key.type =BTRFS_EXTENT_DATA_KEY ;
@@ -104,72 +189,75 @@ static int clone_copy_inline_extent(struct inode *dst,btrfs_item_key_to_cpu (path->nodes[0 ], &key, path->slots[0 ]);if (key.objectid ==btrfs_ino (BTRFS_I (dst)) && key.type ==BTRFS_EXTENT_DATA_KEY ) { +/* +* There's an implicit hole at file offset 0, copy the +* inline extent's data to the page. +*/ ASSERT (key.offset >0 ); -return -EOPNOTSUPP ; + ret =copy_inline_to_page (dst, new_key->offset, + inline_data, size, datal, + comp_type); + goto out; } }else if (i_size_read (dst) <= datal) {struct btrfs_file_extent_item *ei; -u64 ext_len; -/* -* If the file size is <= datal, make sure there are no other -* extents following (can happen do to an fallocate call with -* the flag FALLOC_FL_KEEP_SIZE). -*/ ei =btrfs_item_ptr (path->nodes[0 ], path->slots[0 ], struct btrfs_file_extent_item);/* -* If it's an inline extent, it can not have other extents -* following it. +* If it's an inline extent replace it with the source inline +* extent, otherwise copy the source inline extent data into +* the respective page at the destination inode. */ if (btrfs_file_extent_type (path->nodes[0 ], ei) ==BTRFS_FILE_EXTENT_INLINE ) goto copy_inline_extent; - ext_len =btrfs_file_extent_num_bytes (path->nodes[0 ], ei); -if (ext_len > aligned_end) -return -EOPNOTSUPP ; - - ret =btrfs_next_item (root, path); -if (ret <0 ) { -return ret; - }else if (ret ==0 ) { -btrfs_item_key_to_cpu (path->nodes[0 ], &key, - path->slots[0 ]); -if (key.objectid ==btrfs_ino (BTRFS_I (dst)) && - key.type ==BTRFS_EXTENT_DATA_KEY ) -return -EOPNOTSUPP ; - } + ret =copy_inline_to_page (dst, new_key->offset, inline_data, + size, datal, comp_type); + goto out; } copy_inline_extent: + ret =0 ;/* * We have no extent items, or we have an extent at offset 0 which may * or may not be inlined. All these cases are dealt the same way. */ if (i_size_read (dst) > datal) {/* -* If the destination inode has an inline extent... -* This would require copying the data from the source inline -* extent into the beginning of the destination's inline extent. -* But this is really complex, both extents can be compressed -* or just one of them, which would require decompressing and -* re-compressing data (which could increase the new compressed -* size, not allowing the compressed data to fit anymore in an -* inline extent). -* So just don't support this case for now (it should be rare, -* we are not really saving space when cloning inline extents). +* At the destination offset 0 we have either a hole, a regular +* extent or an inline extent larger then the one we want to +* clone. Deal with all these cases by copying the inline extent +* data into the respective page at the destination inode. */ -return -EOPNOTSUPP ; + ret =copy_inline_to_page (dst, new_key->offset, inline_data, + size, datal, comp_type); + goto out; }btrfs_release_path (path); +/* +* If we end up here it means were copy the inline extent into a leaf +* of the destination inode. We know we will drop or adjust at most one +* extent item in the destination root. +* +* 1 unit - adjusting old extent (we may have to split it) +* 1 unit - add new extent +* 1 unit - inode update +*/ + trans =btrfs_start_transaction (root,3 ); +if (IS_ERR (trans)) { + ret =PTR_ERR (trans); + trans =NULL ; + goto out; + } ret =btrfs_drop_extents (trans, root, dst, drop_start, aligned_end,1 );if (ret) -return ret; + goto out; ret =btrfs_insert_empty_item (trans, root, path, new_key, size);if (ret) -return ret; + goto out; write_extent_buffer(path->nodes[0], inline_data, btrfs_item_ptr_offset(path->nodes[0],
@@ -177,8 +265,28 @@ static int clone_copy_inline_extent(struct inode *dst, size);inode_add_bytes (dst, datal);set_bit (BTRFS_INODE_NEEDS_FULL_SYNC , &BTRFS_I (dst)->runtime_flags); +out: +if (!ret && !trans) { +/* +* No transaction here means we copied the inline extent into a +* page of the destination inode. +* +* 1 unit to update inode item +*/ + trans =btrfs_start_transaction (root,1 ); +if (IS_ERR (trans)) { + ret =PTR_ERR (trans); + trans =NULL ; + } + } +if (ret && trans) { +btrfs_abort_transaction (trans, ret); +btrfs_end_transaction (trans); + } +if (!ret) + *trans_out = trans; -return 0 ; +return ret; }/**
@@ -197,7 +305,6 @@ static int btrfs_clone(struct inode *src, struct inode *inode, const u64 destoff, int no_time_update) {struct btrfs_fs_info *fs_info =btrfs_sb (inode->i_sb); -struct btrfs_root *root =BTRFS_I (inode)->root;struct btrfs_path *path =NULL ;struct extent_buffer *leaf;struct btrfs_trans_handle *trans;
@@ -234,6 +341,7 @@ static int btrfs_clone(struct inode *src, struct inode *inode,struct btrfs_key new_key;u64 disko =0 , diskl =0 ;u64 datao =0 , datal =0 ; +u8 comp;u64 drop_start;/*
@@ -279,6 +387,7 @@ static int btrfs_clone(struct inode *src, struct inode *inode, extent =btrfs_item_ptr (leaf, slot, struct btrfs_file_extent_item); + comp =btrfs_file_extent_compression (leaf, extent); type =btrfs_file_extent_type (leaf, extent);if (type ==BTRFS_FILE_EXTENT_REG || type ==BTRFS_FILE_EXTENT_PREALLOC ) {
@@ -374,29 +483,11 @@ static int btrfs_clone(struct inode *src, struct inode *inode,if (key.offset !=0 || datal > fs_info->sectorsize)return -EUCLEAN ; -/* -* If our extent is inline, we know we will drop or -* adjust at most 1 extent item in the destination root. -* -* 1 - adjusting old extent (we may have to split it) -* 1 - add new extent -* 1 - inode update -*/ - trans =btrfs_start_transaction (root,3 ); -if (IS_ERR (trans)) { - ret =PTR_ERR (trans); - goto out; - } - - ret =clone_copy_inline_extent (inode, trans, path, - &new_key, drop_start, - datal, size, buf); -if (ret) { -if (ret != -EOPNOTSUPP ) -btrfs_abort_transaction (trans, ret); -btrfs_end_transaction (trans); + ret =clone_copy_inline_extent (inode, path, &new_key, + drop_start, datal, size, + comp, buf, &trans); +if (ret) goto out; - } }btrfs_release_path (path);
@@ -533,6 +624,7 @@ static noinline int btrfs_clone_files(struct file *file, struct file *file_src,struct inode *src =file_inode (file_src);struct btrfs_fs_info *fs_info =btrfs_sb (inode->i_sb);int ret; +int wb_ret;u64 len = olen;u64 bs = fs_info->sb->s_blocksize;
@@ -573,6 +665,14 @@ static noinline int btrfs_clone_files(struct file *file, struct file *file_src,btrfs_double_extent_lock (src, off, inode, destoff, len); ret =btrfs_clone (src, inode, off, olen, len, destoff,0 );btrfs_double_extent_unlock (src, off, inode, destoff, len); + +/* +* We may have copied a inline extent into a page of the destination +* range, so wait for writeback to complete before truncating pages +* from the page cache. This is a rare case. +*/ + wb_ret =btrfs_wait_ordered_range (inode, destoff, len); + ret = ret ? ret : wb_ret;/* * Truncate page cache pages so that future reads will see the cloned * data immediately and not the previous data.
Signature · 1 line
2.11.0
Quoted 6 lines · On Fri, Feb 28, 2020 at 01:04:16PM +0000, [email protected] wrote:
From: Filipe Manana <[email protected]>
This patchset adds support for currently unsupported cases of reflink operations that cover a file range that has inline extents, more details on why/how in patch 3/3.
Quoted 6 lines
It also starts by moving all the reflink code out of
ioctl.cinto a new file namedreflink.c(like xfs does) since this code is quite significant in size and has grown over the years.V4: Updated patch 3 to fix a deadlock due to allocating space while holding
a transaction open. No changes to the first two patches.
V4 replaced in for-next, thanks.
Quoted 7 lines · David Sterba
Quoted 6 lines · On Fri, Feb 28, 2020 at 01:04:16PM +0000, [email protected] wrote:
From: Filipe Manana <[email protected]>
This patchset adds support for currently unsupported cases of reflink operations that cover a file range that has inline extents, more details on why/how in patch 3/3.
Quoted 8 lines
Quoted 6 lines
It also starts by moving all the reflink code out of
ioctl.cinto a new file namedreflink.c(like xfs does) since this code is quite significant in size and has grown over the years.V4: Updated patch 3 to fix a deadlock due to allocating space while holding
a transaction open. No changes to the first two patches.V4 replaced in for-next, thanks.
Moved to misc-next.