Skip to contentSkip to conversation

ARM: ebsa110: replace setup_irq() by request_irq()

PATCH New afzal mohammed 1 participant 1 message Mar 1, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 ARM: ebsa110: replace setup_irq() by request_irq()

request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready.

Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

---
Hi sub-arch maintainers,

If the patch is okay, please take it thr' your tree.

Regards
afzal

v3:
* Split out from series, also split out from ARM patch to subarch level as Thomas suggested to take it thr' respective maintainers
* Modify string displayed in case of error as suggested by Thomas
* Re-arrange code as required to improve readability
* Remove irrelevant parts from commit message & improve

v2:
* Replace pr_err("request_irq() on %s failed" by

           pr_err("%s: request_irq() failed"

* Commit message massage

 arch/arm/mach-ebsa110/core.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)
arch/arm/mach-ebsa110/core.c +5 -7
index da2ff4f61d6b..575b2e2b6759 100644
@@ -201,17 +201,13 @@ ebsa110_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction ebsa110_timer_irq = {
-	.name		= "EBSA110 Timer Tick",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= ebsa110_timer_interrupt,
-};
-
 /*
  * Set up timer interrupt.
  */
 void __init ebsa110_timer_init(void)
 {
+	int irq = IRQ_EBSA110_TIMER0;
+
 	arch_gettimeoffset = ebsa110_gettimeoffset;
 
 	/*
@@ -221,7 +217,9 @@ void __init ebsa110_timer_init(void)
 	__raw_writeb(COUNT & 0xff, PIT_T1);
 	__raw_writeb(COUNT >> 8, PIT_T1);
 
-	setup_irq(IRQ_EBSA110_TIMER0, &ebsa110_timer_irq);
+	if (request_irq(irq, ebsa110_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			"EBSA110 Timer Tick", NULL))
+		pr_err("Failed to request irq %d (EBSA110 Timer Tick)\n", irq);
 }
 
 static struct plat_serial8250_port serial_platform_data[] = {
Signature · 1 line
2.25.1