arch/Config.in.arm: add BR2_GCC_TARGET_ARCH entries
RFC v2 1/2 arch/Config.in.arm: add BR2_GCC_TARGET_ARCH entries
Add BR2_GCC_TARGET_ARCH entries, determined by (gcc-9.2.0)
$ ./host/bin/arm-buildroot-linux-gnueabihf-gcc -Q -mcpu=$(BR2_GCC_TARGET_CPU) --help=target | grep march
Or (for cortex-m3/cortex-m4/cortex-m7):
$ ./host/bin/arm-buildroot-linux-gnueabihf-gcc -Q -mcpu=$(BR2_GCC_TARGET_CPU) -mthumb --help=target | grep march
Or (where indicated):
$ ./host/bin/arm-buildroot-linux-gnueabihf-gcc -Q -mcpu=$(BR2_GCC_TARGET_CPU) -msoft-float --help=target | grep march
The soft/hard float flags could be determined from
the arch/Config.in.arm processor definitions or the given isa_bit_... flags from build/host-gcc-final-9.2.0/build/gcc/arm-cpu-cdata.h.
---
Notes:
- Fix ToDo's for unknown cpus
- Add BR2_GCC_TARGET_ARCH for other archs?
Changes v1 -> v2:
- new patch
--- arch/Config.in.arm | 72 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+)
arch/Config.in.arm +72 -0
@@ -898,6 +898,78 @@ config BR2_GCC_TARGET_CPU # armv8.4a default "saphira" if BR2_saphira +config BR2_GCC_TARGET_ARCH + # armv4 + default "armv4t" if BR2_arm920t + default "armv4t" if BR2_arm922t + default "armv4" if BR2_fa526 + default "armv4" if BR2_strongarm + # armv5 + default "armv5tej+fp" if BR2_arm926t + default "iwmmxt" if BR2_iwmmxt + default "armv5te" if BR2_xscale # -msoft-float + # armv6 + default "armv6j" if BR2_arm1136j_s # -msoft-float + default "armv6j+fp" if BR2_arm1136jf_s + default "armv6kz" if BR2_arm1176jz_s # -msoft-float + default "armv6kz+fp" if BR2_arm1176jzf_s + default "armv6k+fp" if BR2_arm11mpcore && BR2_ARM_CPU_HAS_VFPV2 + default "armv6k" if BR2_arm11mpcore # -msoft-float + # armv7a + default "armv7-a+mp+sec+fp" if BR2_cortex_a5 + default "armv7ve+vfpv3-d16" if BR2_cortex_a7 + default "armv7-a+sec+fp" if BR2_cortex_a8 + default "armv7-a+mp+sec+fp" if BR2_cortex_a9 + default "armv7ve+vfpv3-d16" if BR2_cortex_a12 + default "armv7ve+vfpv3-d16" if BR2_cortex_a15 + default "armv7ve+vfpv3-d16" if BR2_cortex_a15_a7 + default "armv7ve+vfpv3-d16" if BR2_cortex_a17 + default "armv7ve+vfpv3-d16" if BR2_cortex_a17_a7 + default "armv7-a+mp+sec+fp" if BR2_pj4 + # armv7m + default "armv7-m" if BR2_cortex_m3 + default "armv7e-m+fp.dp" if BR2_cortex_m4 + default "armv7e-m+fp.dp" if BR2_cortex_m7 + # armv8a + default "armv8-a+crc+simd" if BR2_cortex_a32 + default "armv8-a+crc+simd" if BR2_cortex_a35 + default "armv8-a+crc+simd" if BR2_cortex_a53 + default "armv8-a+crc+simd" if BR2_cortex_a57 + default "armv8-a+crc+simd" if BR2_cortex_a57_a53 + default "armv8-a+crc+simd" if BR2_cortex_a72 + default "armv8-a+crc+simd" if BR2_cortex_a72_a53 + default "armv8-a+crc+simd" if BR2_cortex_a73 + default "armv8-a+crc+simd" if BR2_cortex_a73_a35 + default "armv8-a+crc+simd" if BR2_cortex_a73_a53 + default "armv8-a+crc+simd" if BR2_emag # ToDo: error: unrecognized -mcpu target: emag + default "armv8-a+crc+simd" if BR2_exynos_m1 + default "armv8-a" if BR2_falkor # ToDo: error: unrecognized -mcpu target: falkor + default "armv8-a" if BR2_phecda # ToDo: error: unrecognized -mcpu target: phecda + default "armv8-a" if BR2_qdf24xx # ToDo: error: unrecognized -mcpu target: qdf24xx + default "armv8-a" if BR2_thunderx && !BR2_TOOLCHAIN_GCC_AT_LEAST_9 # ToDo: error: unrecognized -mcpu target: thunderx + default "armv8-a" if BR2_thunderx && BR2_TOOLCHAIN_GCC_AT_LEAST_9 # ToDo: error: unrecognized -mcpu target: octeontx + default "armv8-a" if BR2_thunderxt81 && !BR2_TOOLCHAIN_GCC_AT_LEAST_9 # ToDo: error: unrecognized -mcpu target: thunderxt81 + default "armv8-a" if BR2_thunderxt81 && BR2_TOOLCHAIN_GCC_AT_LEAST_9 # ToDo: error: unrecognized -mcpu target: octeontx81 + default "armv8-a" if BR2_thunderxt83 && !BR2_TOOLCHAIN_GCC_AT_LEAST_9 # ToDo: error: unrecognized -mcpu target: thunderxt83 + default "armv8-a" if BR2_thunderxt83 && BR2_TOOLCHAIN_GCC_AT_LEAST_9 # ToDo: error: unrecognized -mcpu target: octeontx83 + default "armv8-a" if BR2_thunderxt88 # ToDo: error: unrecognized -mcpu target: thunderxt88 + default "armv8-a" if BR2_thunderxt88p1 # ToDo: error: unrecognized -mcpu target: thunderxt88p1 + default "armv8-a+simd" if BR2_xgene1 + # armv8.1a + default "armv8.1-a" if BR2_thunderx2t99 # ToDo: error: unrecognized -mcpu target: thunderx2t99 + default "armv8.1-a" if BR2_thunderx2t99p1 # ToDo: error: unrecognized -mcpu target: thunderx2t99p1 + default "armv8.1-a" if BR2_vulcan # ToDo: error: unrecognized -mcpu target: vulcan + # armv8.2a + default "armv8.2-a+simd" if BR2_cortex_a55 + default "armv8.2-a+simd" if BR2_cortex_a75 + default "armv8.2-a+simd" if BR2_cortex_a75_a55 + default "armv8.2-a+simd" if BR2_cortex_a76 + default "armv8.2-a+simd" if BR2_cortex_a76_a55 + default "armv8.2-a+simd" if BR2_neoverse_n1 + default "armv8.2-a" if BR2_tsv110 # ToDo: error: unrecognized -mcpu target: tsv110 + # armv8.4a + default "armv8.4-a" if BR2_saphira # ToDo: error: unrecognized -mcpu target: saphira + config BR2_GCC_TARGET_ABI default "aapcs-linux" if BR2_arm || BR2_armeb default "lp64" if BR2_aarch64 || BR2_aarch64_be
Signature · 1 line
2.25.1
RFC v2 1/2 arch/Config.in.arm: add BR2_GCC_TARGET_ARCH entries
Quoted 1 line · Peter Seiderer
Add
BR2_GCC_TARGET_ARCHentries, determined by (gcc-9.2.0)
Argh..., should have been BR2_GCC_TARGET_ARM_ARCH (not the already existing BR2_GCC_TARGET_ARCH)....
Regards,
Peter
Quoted 107 lines
$ ./host/bin/arm-buildroot-linux-gnueabihf-gcc -Q -mcpu=$(BR2_GCC_TARGET_CPU) --help=target | grep marchOr (for cortex-m3/cortex-m4/cortex-m7):
$ ./host/bin/arm-buildroot-linux-gnueabihf-gcc -Q -mcpu=$(BR2_GCC_TARGET_CPU) -mthumb --help=target | grep marchOr (where indicated):
$ ./host/bin/arm-buildroot-linux-gnueabihf-gcc -Q -mcpu=$(BR2_GCC_TARGET_CPU) -msoft-float --help=target | grep marchThe soft/hard float flags could be determined from
thearch/Config.in.armprocessor definitions or the givenisa_bit_... flags frombuild/host-gcc-final-9.2.0/build/gcc/arm-cpu-cdata.h.Signed-off-by Peter Seiderer <[email protected]>---
Notes:
- Fix ToDo's for unknown cpus
- AddBR2_GCC_TARGET_ARCHfor other archs?Changes v1 -> v2:
- new patch--- arch/Config.in.arm | 72 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+)arch/Config.in.arm +72
-0@@ -898,6 +898,78 @@ config BR2_GCC_TARGET_CPU # armv8.4a default "saphira" if BR2_saphira +config BR2_GCC_TARGET_ARCH + # armv4 + default "armv4t" if BR2_arm920t + default "armv4t" if BR2_arm922t + default "armv4" if BR2_fa526 + default "armv4" if BR2_strongarm + # armv5 + default "armv5tej+fp" if BR2_arm926t + default "iwmmxt" if BR2_iwmmxt + default "armv5te" if BR2_xscale # -msoft-float + # armv6 + default "armv6j" if BR2_arm1136j_s # -msoft-float + default "armv6j+fp" if BR2_arm1136jf_s + default "armv6kz" if BR2_arm1176jz_s # -msoft-float + default "armv6kz+fp" if BR2_arm1176jzf_s + default "armv6k+fp" if BR2_arm11mpcore && BR2_ARM_CPU_HAS_VFPV2 + default "armv6k" if BR2_arm11mpcore # -msoft-float + # armv7a + default "armv7-a+mp+sec+fp" if BR2_cortex_a5 + default "armv7ve+vfpv3-d16" if BR2_cortex_a7 + default "armv7-a+sec+fp" if BR2_cortex_a8 + default "armv7-a+mp+sec+fp" if BR2_cortex_a9 + default "armv7ve+vfpv3-d16" if BR2_cortex_a12 + default "armv7ve+vfpv3-d16" if BR2_cortex_a15 + default "armv7ve+vfpv3-d16" if BR2_cortex_a15_a7 + default "armv7ve+vfpv3-d16" if BR2_cortex_a17 + default "armv7ve+vfpv3-d16" if BR2_cortex_a17_a7 + default "armv7-a+mp+sec+fp" if BR2_pj4 + # armv7m + default "armv7-m" if BR2_cortex_m3 + default "armv7e-m+fp.dp" if BR2_cortex_m4 + default "armv7e-m+fp.dp" if BR2_cortex_m7 + # armv8a + default "armv8-a+crc+simd" if BR2_cortex_a32 + default "armv8-a+crc+simd" if BR2_cortex_a35 + default "armv8-a+crc+simd" if BR2_cortex_a53 + default "armv8-a+crc+simd" if BR2_cortex_a57 + default "armv8-a+crc+simd" if BR2_cortex_a57_a53 + default "armv8-a+crc+simd" if BR2_cortex_a72 + default "armv8-a+crc+simd" if BR2_cortex_a72_a53 + default "armv8-a+crc+simd" if BR2_cortex_a73 + default "armv8-a+crc+simd" if BR2_cortex_a73_a35 + default "armv8-a+crc+simd" if BR2_cortex_a73_a53 + default "armv8-a+crc+simd" if BR2_emag # ToDo: error: unrecognized -mcpu target: emag + default "armv8-a+crc+simd" if BR2_exynos_m1 + default "armv8-a" if BR2_falkor # ToDo: error: unrecognized -mcpu target: falkor + default "armv8-a" if BR2_phecda # ToDo: error: unrecognized -mcpu target: phecda + default "armv8-a" if BR2_qdf24xx # ToDo: error: unrecognized -mcpu target: qdf24xx + default "armv8-a" if BR2_thunderx && !BR2_TOOLCHAIN_GCC_AT_LEAST_9 # ToDo: error: unrecognized -mcpu target: thunderx + default "armv8-a" if BR2_thunderx && BR2_TOOLCHAIN_GCC_AT_LEAST_9 # ToDo: error: unrecognized -mcpu target: octeontx + default "armv8-a" if BR2_thunderxt81 && !BR2_TOOLCHAIN_GCC_AT_LEAST_9 # ToDo: error: unrecognized -mcpu target: thunderxt81 + default "armv8-a" if BR2_thunderxt81 && BR2_TOOLCHAIN_GCC_AT_LEAST_9 # ToDo: error: unrecognized -mcpu target: octeontx81 + default "armv8-a" if BR2_thunderxt83 && !BR2_TOOLCHAIN_GCC_AT_LEAST_9 # ToDo: error: unrecognized -mcpu target: thunderxt83 + default "armv8-a" if BR2_thunderxt83 && BR2_TOOLCHAIN_GCC_AT_LEAST_9 # ToDo: error: unrecognized -mcpu target: octeontx83 + default "armv8-a" if BR2_thunderxt88 # ToDo: error: unrecognized -mcpu target: thunderxt88 + default "armv8-a" if BR2_thunderxt88p1 # ToDo: error: unrecognized -mcpu target: thunderxt88p1 + default "armv8-a+simd" if BR2_xgene1 + # armv8.1a + default "armv8.1-a" if BR2_thunderx2t99 # ToDo: error: unrecognized -mcpu target: thunderx2t99 + default "armv8.1-a" if BR2_thunderx2t99p1 # ToDo: error: unrecognized -mcpu target: thunderx2t99p1 + default "armv8.1-a" if BR2_vulcan # ToDo: error: unrecognized -mcpu target: vulcan + # armv8.2a + default "armv8.2-a+simd" if BR2_cortex_a55 + default "armv8.2-a+simd" if BR2_cortex_a75 + default "armv8.2-a+simd" if BR2_cortex_a75_a55 + default "armv8.2-a+simd" if BR2_cortex_a76 + default "armv8.2-a+simd" if BR2_cortex_a76_a55 + default "armv8.2-a+simd" if BR2_neoverse_n1 + default "armv8.2-a" if BR2_tsv110 # ToDo: error: unrecognized -mcpu target: tsv110 + # armv8.4a + default "armv8.4-a" if BR2_saphira # ToDo: error: unrecognized -mcpu target: saphira + config BR2_GCC_TARGET_ABI default "aapcs-linux" if BR2_arm || BR2_armeb default "lp64" if BR2_aarch64 || BR2_aarch64_be
RFC v2 2/2 package/qt5webengine: fix chromium arm compile flags
In reply to Peter SeidererThe qt5webengine configure simple takes QT_ARCH ('arm') to determine the chromium compiler flags and uses some hard coded ARMv7 default values for the compiler command line: '... -march=armv7-a -mfloat-abi=hard -mtune=generic-armv7-a -mfpu=vfpv3-d16 ...'.
This results e.g. in an illegal instruction failure for rpi zero (reported on the mailing list, see [1]).
Custom values could be set in the file src/3rdparty/chromium/build/config/arm.gni (as tested by an proof-of-concept patch [2]).
[1] http://lists.busybox.net/pipermail/buildroot/2020-February/274587.html
[2] http://lists.busybox.net/pipermail/buildroot/2020-February/274586.html
---
Changes v1 -> v2:
- use new introduced BR2_GCC_TARGET_ARCH for arm_arch as the previous simple approach did not work (alternative would be to extract the arch at runtime via gcc invocation)
package/qt5/qt5webengine: fix chromium arm compile flags (change to BR2_GCC_TARGET_ARCH)
--- package/qt5/qt5webengine/qt5webengine.mk | 69 ++++++++++++++++++++++++ 1 file changed, 69 insertions(+)
package/qt5/qt5webengine/qt5webengine.mk +69 -0
@@ -63,7 +63,76 @@ QT5WEBENGINE_PRE_CONFIGURE_HOOKS += QT5WEBENGINE_CREATE_HOST_PKG_CONFIG QT5WEBENGINE_ENV += GN_PKG_CONFIG_HOST=$(@D)/host-bin/host-pkg-config endif +# configure arm architecture paramter for chromium compile +ifeq ($(BR2_arm),y) +ifeq ($(BR2_ARM_CPU_ARMV4),y) +define QT5WEBENGINE_CONFIGURE_ARM_VERSION + $(SED) 's/^ arm_version = 7$$/ arm_version = 4/' $(@D)/src/3rdparty/chromium/build/config/arm.gni +endef +endif + +ifeq ($(BR2_ARM_CPU_ARMV5),y) +define QT5WEBENGINE_CONFIGURE_ARM_VERSION + $(SED) 's/^ arm_version = 7$$/ arm_version = 5/' $(@D)/src/3rdparty/chromium/build/config/arm.gni +endef +endif + +ifeq ($(BR2_ARM_CPU_ARMV6),y) +define QT5WEBENGINE_CONFIGURE_ARM_VERSION + $(SED) 's/^ arm_version = 7$$/ arm_version = 6/' $(@D)/src/3rdparty/chromium/build/config/arm.gni +endef +endif + +# no entriy for BR2_ARM_CPU_ARMV7A/BR2_ARM_CPU_ARMV7M, arm_vesion = 7 is already set as default + +ifeq ($(BR2_ARM_CPU_ARMV8A),y) +define QT5WEBENGINE_CONFIGURE_ARM_VERSION + $(SED) 's/^ arm_version = 7$$/ arm_version = 8/' $(@D)/src/3rdparty/chromium/build/config/arm.gni +endef +endif + +define QT5WEBENGINE_CONFIGURE_ARM_ARCH + $(SED) 's/^ arm_arch = ""$$/ arm_arch = $(BR2_GCC_TARGET_ARCH)/' $(@D)/src/3rdparty/chromium/build/config/arm.gni +endef + +define QT5WEBENGINE_CONFIGURE_ARM_FPU + $(SED) 's/^ arm_fpu = ""$$/ arm_fpu = $(BR2_GCC_TARGET_FPU)/' $(@D)/src/3rdparty/chromium/build/config/arm.gni +endef + +define QT5WEBENGINE_CONFIGURE_ARM_FLOAT_ABI + $(SED) 's/^ arm_float_abi = ""$$/ arm_float_abi = $(BR2_GCC_TARGET_FLOAT_ABI)/' $(@D)/src/3rdparty/chromium/build/config/arm.gni +endef + +define QT5WEBENGINE_CONFIGURE_ARM_TUNE + $(SED) 's/^ arm_tune = ""$$/ arm_tune = $(BR2_GCC_TARGET_CPU)/' $(@D)/src/3rdparty/chromium/build/config/arm.gni +endef + +ifeq ($(BR2_ARM_CPU_HAS_NEON),y) +define QT5WEBENGINE_CONFIGURE_ARM_NEON + $(SED) 's/^ arm_use_neon = ""$$/ arm_use_neon = "true"/' $(@D)/src/3rdparty/chromium/build/config/arm.gni + $(SED) 's/^ arm_optionally_use_neon = false$$/ arm_optionally_use_neon = true/' $(@D)/src/3rdparty/chromium/build/config/arm.gni +endef +else +define QT5WEBENGINE_CONFIGURE_ARM_NEON + $(SED) 's/^ arm_use_neon = ""$$/ arm_use_neon = "false"/' $(@D)/src/3rdparty/chromium/build/config/arm.gni +endef +endif + +ifeq ($(BR2_ARM_CPU_HAS_THUMB),) +define QT5WEBENGINE_CONFIGURE_ARM_THUMB + $(SED) 's/^ arm_use_thumb = true$$/ arm_use_thumb = false/' $(@D)/src/3rdparty/chromium/build/config/arm.gni +endef +endif +endif + define QT5WEBENGINE_CONFIGURE_CMDS + $(QT5WEBENGINE_CONFIGURE_ARM_VERSION) + $(QT5WEBENGINE_CONFIGURE_ARM_ARCH) + $(QT5WEBENGINE_CONFIGURE_ARM_FPU) + $(QT5WEBENGINE_CONFIGURE_ARM_FLOAT_ABI) + $(QT5WEBENGINE_CONFIGURE_ARM_TUNE) + $(QT5WEBENGINE_CONFIGURE_ARM_NEON) + $(QT5WEBENGINE_CONFIGURE_ARM_THUMB) (cd $(@D); $(TARGET_MAKE_ENV) $(QT5WEBENGINE_ENV) $(HOST_DIR)/bin/qmake $(QT5WEBENGINE_QMAKEFLAGS)) endef
Signature · 1 line
2.25.1
RFC v2 2/2 package/qt5webengine: fix chromium arm compile flags
Quoted 8 lines · On Mon, 2 Mar 2020 10:19:26 +0100 Peter Seiderer <[email protected]> wrote:
The qt5webengine configure simple takes
QT_ARCH('arm') to determine the chromium compiler flags and uses some hard coded ARMv7 default values for the compiler command line: '... -march=armv7-a -mfloat-abi=hard -mtune=generic-armv7-a -mfpu=vfpv3-d16 ...'.This results e.g. in an illegal instruction failure for rpi zero (reported on the mailing list, see [1]).
Quoted 7 lines
Custom values could be set in the file src/3rdparty/chromium/build/config/arm.gni (as tested by an proof-of-concept patch [2]).
[1] http://lists.busybox.net/pipermail/buildroot/2020-February/274587.html
[2] http://lists.busybox.net/pipermail/buildroot/2020-February/274586.htmlSigned-off-by Peter Seiderer <[email protected]>
Could we instead ask this thing to not do all this sorcery, and instead just use the compiler as-is, without passing crazy architecture-specific compiler flags ?
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
RFC v2 2/2 package/qt5webengine: fix chromium arm compile flags
Hello Thomas,
Quoted 14 lines · Thomas Petazzoni
Quoted 11 lines · On Mon, 2 Mar 2020 10:19:26 +0100 Peter Seiderer <[email protected]> wrote:
The qt5webengine configure simple takes
QT_ARCH('arm') to determine the chromium compiler flags and uses some hard coded ARMv7 default values for the compiler command line: '... -march=armv7-a -mfloat-abi=hard -mtune=generic-armv7-a -mfpu=vfpv3-d16 ...'.This results e.g. in an illegal instruction failure for rpi zero (reported on the mailing list, see [1]).
Custom values could be set in the file src/3rdparty/chromium/build/config/arm.gni (as tested by an proof-of-concept patch [2]).
Quoted 8 lines
Quoted 4 lines
[1] http://lists.busybox.net/pipermail/buildroot/2020-February/274587.html
[2] http://lists.busybox.net/pipermail/buildroot/2020-February/274586.htmlSigned-off-by Peter Seiderer <[email protected]>Could we instead ask this thing to not do all this sorcery, and instead just use the compiler as-is, without passing crazy architecture-specific compiler flags ?
Disabled all march/mfloat-abi/mtune/mfpu flags with the following patch:
src/3rdparty/chromium/build/config/compiler/BUILD.gn +8 -7
@@ -672,7 +672,7 @@ config("compiler") { # TODO(pcc): The contents of .ARM.attributes should be based on the # -march flag passed at compile time (see llvm.org/pr36291). if (current_cpu == "arm") { - ldflags += [ "-march=$arm_arch" ] +# ldflags += [ "-march=$arm_arch" ] } }
@@ -752,13 +752,13 @@ config("compiler_cpu_abi") { ldflags += [ "--target=arm-linux-gnueabihf" ] } if (!is_nacl) { - cflags += [ - "-march=$arm_arch", - "-mfloat-abi=$arm_float_abi", - ] +# cflags += [ +# "-march=$arm_arch", +# "-mfloat-abi=$arm_float_abi", +# ] } if (arm_tune != "") { - cflags += [ "-mtune=$arm_tune" ] +# cflags += [ "-mtune=$arm_tune" ] } } else if (current_cpu == "arm64") { if (is_clang && !is_android && !is_nacl && !is_fuchsia) {
@@ -1130,7 +1130,8 @@ config("clang_revision") { config("compiler_arm_fpu") { if (current_cpu == "arm" && !is_ios && !is_nacl) { - cflags = [ "-mfpu=$arm_fpu" ] +# cflags = [ "-mfpu=$arm_fpu" ] + cflags = [ ] asmflags = cflags } }
Quick (if you call can call it quick with miniumum 50 minutes compile time) worked for a buildroot toolchain (which defaults to the right cpu) and the rpi zero testcase..., but now no buildroot specific flags are used for the compile (no optimize, no custom, no cpu type etc.)..., will work with compilers with the right default values...
Not sure if other optional compiles depend on the right setting of one of the arm_... parameters...
Regards,
Peter
Quoted 2 lines
Thomas
RFC v2 2/2 package/qt5webengine: fix chromium arm compile flags
Hello Peter,
Quoted 5 lines · On Mon, 2 Mar 2020 23:01:55 +0100 Peter Seiderer <[email protected]> wrote:
Quoted 3 lines
Could we instead ask this thing to not do all this sorcery, and instead just use the compiler as-is, without passing crazy architecture-specific compiler flags ?
Disabled all march/mfloat-abi/mtune/mfpu flags with the following patch:
[...]
Thanks for this work! To me this feels like a better solution, even though it's annoying to maintain such a local patch. I assume there's pretty much zero chance to get this merged by upstream Chromium, and then back into the qt5webengine code anyway.
Quoted 5 lines
Quick (if you call can call it quick with miniumum 50 minutes compile time) worked for a buildroot toolchain (which defaults to the right cpu) and the rpi zero testcase..., but now no buildroot specific flags are used for the compile (no optimize, no custom, no cpu type etc.)..., will work with compilers with the right default values...
The CPU type is encoded into the compiler wrapper. So it's really only the optimization/debug flags that you will be missing.
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com