bootcounter: add DM support for memory based bootcounter
PATCH v2 1/1 bootcounter: add DM support for memory based bootcounter
add DM/DTS support for the memory based bootcounter in drivers/bootcount/bootcount.c.
Let the old implementation in, so boards which have not yet convert to DM/DTS do not break.
---
Travis build:
https://travis-ci.org/hsdenx/u-boot-test/builds/657150708
Changes in v2:
- add changes requested from Simon Glass
- add comment to struct bootcount_mem_priv
- change type of singleword from u8 to bool
- use dev_read_addr() and dev_read_bool()
- use "u-boot,bootcount" for compatible
string instead "uboot,bootcount"
doc/device-tree-bindings/misc/bootcounter.txt | 21 +++++ drivers/bootcount/Kconfig | 7 ++ drivers/bootcount/Makefile | 1 + drivers/bootcount/bootcount.c | 92 +++++++++++++++++++ 4 files changed, 121 insertions(+) create mode 100644 doc/device-tree-bindings/misc/bootcounter.txt
doc/device-tree-bindings/misc/bootcounter.txt new file +21 -0
@@ -0,0 +1,21 @@ +U-Boot bootcounter Devicetree Binding +===================================== + +The device tree node describes the U-Boot bootcounter +memory based device binding. + +Required properties : + +- compatible : "u-boot,bootcount"; +- single-word : set this, if you have only one word space + for storing the bootcounter. + +Example +------- + +MPC83xx based board: + +bootcount at 0x13ff8 { + compatible = "u-boot,bootcount"; + reg = <0x13ff8 0x08>; +};
drivers/bootcount/Kconfig +7 -0
@@ -106,6 +106,13 @@ config DM_BOOTCOUNT_I2C_EEPROM pointing to the underlying i2c eeprom device) and an optional 'offset' property are supported. +config BOOTCOUNT_MEM + bool "Support memory based bootcounter" + help + Enabling Memory based bootcount, typically in a SoC register which + is not cleared on softreset. + compatible = "u-boot,bootcount"; + endmenu endif
drivers/bootcount/Makefile +1 -0
@@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0+ obj-$(CONFIG_BOOTCOUNT_GENERIC) += bootcount.o +obj-$(CONFIG_BOOTCOUNT_MEM) += bootcount.o obj-$(CONFIG_BOOTCOUNT_AT91) += bootcount_at91.o obj-$(CONFIG_BOOTCOUNT_AM33XX) += bootcount_davinci.o obj-$(CONFIG_BOOTCOUNT_RAM) += bootcount_ram.o
drivers/bootcount/bootcount.c +92 -0
101 lines not on this page · raw message
Signature · 1 line
2.24.1
PATCH v2 1/1 bootcounter: add DM support for memory based bootcounter
Quoted 20 lines · Heiko Schocher
add DM/DTS support for the memory based bootcounter in
drivers/bootcount/bootcount.c.Let the old implementation in, so boards which have not yet convert to DM/DTS do not break.
Signed-off-by Heiko Schocher <[email protected]>---
Travis build:
https://travis-ci.org/hsdenx/u-boot-test/builds/657150708Changes in v2:
- add changes requested from Simon Glass
- add comment to structbootcount_mem_priv
- change type of singleword from u8 to bool
- usedev_read_addr()anddev_read_bool()
- use "u-boot,bootcount" for compatible
string instead "uboot,bootcount"
Quoted 6 lines
doc/device-tree-bindings/misc/bootcounter.txt | 21 +++++ drivers/bootcount/Kconfig | 7 ++ drivers/bootcount/Makefile | 1 + drivers/bootcount/bootcount.c | 92 +++++++++++++++++++ 4 files changed, 121 insertions(+) create mode 100644 doc/device-tree-bindings/misc/bootcounter.txt
Possible nit: dm.h could be included unconditionally