Skip to contentSkip to conversation

ARM: dts: Fix dm814x Ethernet by changing to use rgmii-id mode

PATCH New Tony Lindgren 1 participant 1 message Mar 3, 2020 Device tree bindings

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: dts: Fix dm814x Ethernet by changing to use rgmii-id mode

Commit cd28d1d6e52e ("net: phy: at803x: Disable phy delay for RGMII mode") caused a regression for dm814x boards where NFSroot would no longer work.

Let's fix the issue by configuring "rgmii-id" mode as internal delays are needed that is no longer the case with "rgmii" mode.

---
 arch/arm/boot/dts/dm8148-evm.dts       | 4 ++--
 arch/arm/boot/dts/dm8148-t410.dts      | 4 ++--
 arch/arm/boot/dts/dra62x-j5eco-evm.dts | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)
arch/arm/boot/dts/dm8148-evm.dts +2 -2
@@ -24,12 +24,12 @@ vmmcsd_fixed: fixedregulator0 {
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 };
 
 &cpsw_emac1 {
 	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 };
 
 &davinci_mdio {
arch/arm/boot/dts/dm8148-t410.dts +2 -2
@@ -33,12 +33,12 @@ vmmcsd_fixed: fixedregulator0 {
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 };
 
 &cpsw_emac1 {
 	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 };
 
 &davinci_mdio {
arch/arm/boot/dts/dra62x-j5eco-evm.dts +2 -2
@@ -24,12 +24,12 @@ vmmcsd_fixed: fixedregulator0 {
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 };
 
 &cpsw_emac1 {
 	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 };
 
 &davinci_mdio {
Signature · 1 line
2.25.1