dt-bindings: spi: convert rockchip spi bindings to yaml
Subsystems (3)
PATCH v3 1/3 dt-bindings: spi: convert rockchip spi bindings to yaml
Current dts files with 'spi' nodes are manually verified. In order to automate this process spi-rockchip.txt has to be converted to yaml. In the new setup spi-rockchip.yaml will inherit properties from spi-controller.yaml.
Add document to MAINTAINERS.
Also rk3188.dtsi, rk3288.dtsi, rk3368.dtsi and rk3399.dtsi use an extra fallback string, so change this in the documentation.
Changed:
"rockchip,rk3188-spi", "rockchip,rk3066-spi"
"rockchip,rk3288-spi", "rockchip,rk3066-spi"
"rockchip,rk3368-spi", "rockchip,rk3066-spi"
"rockchip,rk3399-spi", "rockchip,rk3066-spi"
---
Changes v3:
fix compile for latest linux-next
remove some comments
Changes v2:
include suggestions by robh
--- .../devicetree/bindings/spi/spi-rockchip.txt | 58 ------------ .../devicetree/bindings/spi/spi-rockchip.yaml | 105 +++++++++++++++++++++ MAINTAINERS | 1 + 3 files changed, 106 insertions(+), 58 deletions(-) delete mode 100644 Documentation/devicetree/bindings/spi/spi-rockchip.txt create mode 100644 Documentation/devicetree/bindings/spi/spi-rockchip.yaml
Documentation/devicetree/bindings/spi/spi-rockchip.txt deleted +0 -58
@@ -1,58 +0,0 @@ -* Rockchip SPI Controller - -The Rockchip SPI controller is used to interface with various devices such as flash -and display controllers using the SPI communication interface. - -Required Properties: - -- compatible: should be one of the following. - "rockchip,rv1108-spi" for rv1108 SoCs. - "rockchip,px30-spi", "rockchip,rk3066-spi" for px30 SoCs. - "rockchip,rk3036-spi" for rk3036 SoCS. - "rockchip,rk3066-spi" for rk3066 SoCs. - "rockchip,rk3188-spi" for rk3188 SoCs. - "rockchip,rk3228-spi" for rk3228 SoCS. - "rockchip,rk3288-spi" for rk3288 SoCs. - "rockchip,rk3368-spi" for rk3368 SoCs. - "rockchip,rk3399-spi" for rk3399 SoCs. -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: The interrupt number to the cpu. The interrupt specifier format - depends on the interrupt controller. -- clocks: Must contain an entry for each entry in clock-names. -- clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for - the peripheral clock. -- #address-cells: should be 1. -- #size-cells: should be 0. - -Optional Properties: - -- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, - Documentation/devicetree/bindings/dma/dma.txt -- dma-names: DMA request names should include "tx" and "rx" if present. -- rx-sample-delay-ns: nanoseconds to delay after the SCLK edge before sampling - Rx data (may need to be fine tuned for high capacitance lines). - No delay (0) by default. -- pinctrl-names: Names for the pin configuration(s); may be "default" or - "sleep", where the "sleep" configuration may describe the state - the pins should be in during system suspend. See also - pinctrl/pinctrl-bindings.txt. - - -Example: - - spi0: spi@ff110000 { - compatible = "rockchip,rk3066-spi"; - reg = <0xff110000 0x1000>; - dmas = <&pdma1 11>, <&pdma1 12>; - dma-names = "tx", "rx"; - rx-sample-delay-ns = <10>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; - clock-names = "spiclk", "apb_pclk"; - pinctrl-0 = <&spi1_pins>; - pinctrl-1 = <&spi1_sleep>; - pinctrl-names = "default", "sleep"; - };
Documentation/devicetree/bindings/spi/spi-rockchip.yaml new file +105 -0
105 lines not on this page · raw message
MAINTAINERS +1 -0
@@ -2281,6 +2281,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git S: Maintained F: Documentation/devicetree/bindings/i2c/i2c-rk3x.txt F: Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml +F: Documentation/devicetree/bindings/spi/spi-rockchip.yaml F: arch/arm/boot/dts/rk3* F: arch/arm/boot/dts/rv1108* F: arch/arm/mach-rockchip/
Signature · 1 line
2.11.0
PATCH v3 2/3 dt-bindings: spi: spi-rockchip: add description for rk3308
The description below is already in use for rk3308.dtsi, but was somehow never added to a document, so add "rockchip,rk3308-spi", "rockchip,rk3066-spi" for spi nodes on a rk3308 platform to spi-rockchip.yaml.
---
Changes v3:
remove some comments
Changes v2:
add acked by
--- Documentation/devicetree/bindings/spi/spi-rockchip.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/spi/spi-rockchip.yaml +1 -0
@@ -29,6 +29,7 @@ properties: - rockchip,px30-spi - rockchip,rk3188-spi - rockchip,rk3288-spi + - rockchip,rk3308-spi - rockchip,rk3368-spi - rockchip,rk3399-spi - const: rockchip,rk3066-spi
Signature · 1 line
2.11.0
Mark Brown
maintainerApplied "dt-bindings: spi: spi-rockchip: add description for rk3308" to the spi tree
The patch
dt-bindings: spi: spi-rockchip: add description for rk3308
has been applied to the spi tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
From db7dd939acf369b3e9bfac2ae75307639785de9e Mon Sep 17 00:00:00 2001
From: Johan Jonker <[email protected]>
Date: Wed, 4 Mar 2020 19:42:02 +0100
Subject: [PATCH] dt-bindings: spi: spi-rockchip: add description for rk3308
The description below is already in use for rk3308.dtsi, but was somehow never added to a document, so add "rockchip,rk3308-spi", "rockchip,rk3066-spi" for spi nodes on a rk3308 platform to spi-rockchip.yaml.
--- Documentation/devicetree/bindings/spi/spi-rockchip.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/spi/spi-rockchip.yaml +1 -0
@@ -29,6 +29,7 @@ properties: - rockchip,px30-spi - rockchip,rk3188-spi - rockchip,rk3288-spi + - rockchip,rk3308-spi - rockchip,rk3368-spi - rockchip,rk3399-spi - const: rockchip,rk3066-spi
Signature · 1 line
2.20.1
PATCH v3 3/3 dt-bindings: spi: spi-rockchip: add description for rk3328
In reply to Johan JonkerThe description below is already in use for rk3328.dtsi, but was somehow never added to a document, so add "rockchip,rk3328-spi", "rockchip,rk3066-spi" for spi nodes on a rk3328 platform to spi-rockchip.yaml.
---
Changes v3:
remove some comments
Changes v2:
add acked by
--- Documentation/devicetree/bindings/spi/spi-rockchip.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/spi/spi-rockchip.yaml +1 -0
@@ -30,6 +30,7 @@ properties: - rockchip,rk3188-spi - rockchip,rk3288-spi - rockchip,rk3308-spi + - rockchip,rk3328-spi - rockchip,rk3368-spi - rockchip,rk3399-spi - const: rockchip,rk3066-spi
Signature · 1 line
2.11.0
Mark Brown
maintainerApplied "dt-bindings: spi: spi-rockchip: add description for rk3328" to the spi tree
The patch
dt-bindings: spi: spi-rockchip: add description for rk3328
has been applied to the spi tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
From 6ac12131699b4ec1d8f339e40528bdd474542075 Mon Sep 17 00:00:00 2001
From: Johan Jonker <[email protected]>
Date: Wed, 4 Mar 2020 19:42:03 +0100
Subject: [PATCH] dt-bindings: spi: spi-rockchip: add description for rk3328
The description below is already in use for rk3328.dtsi, but was somehow never added to a document, so add "rockchip,rk3328-spi", "rockchip,rk3066-spi" for spi nodes on a rk3328 platform to spi-rockchip.yaml.
--- Documentation/devicetree/bindings/spi/spi-rockchip.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/spi/spi-rockchip.yaml +1 -0
@@ -30,6 +30,7 @@ properties: - rockchip,rk3188-spi - rockchip,rk3288-spi - rockchip,rk3308-spi + - rockchip,rk3328-spi - rockchip,rk3368-spi - rockchip,rk3399-spi - const: rockchip,rk3066-spi
Signature · 1 line
2.20.1
Mark Brown
maintainerApplied "dt-bindings: spi: convert rockchip spi bindings to yaml" to the spi tree
In reply to Johan JonkerThe patch
dt-bindings: spi: convert rockchip spi bindings to yaml
has been applied to the spi tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
From 5de04175fa2720bacf34196275123be5f32e2b82 Mon Sep 17 00:00:00 2001
From: Johan Jonker <[email protected]>
Date: Wed, 4 Mar 2020 19:42:01 +0100
Subject: [PATCH] dt-bindings: spi: convert rockchip spi bindings to yaml
Current dts files with 'spi' nodes are manually verified. In order to automate this process spi-rockchip.txt has to be converted to yaml. In the new setup spi-rockchip.yaml will inherit properties from spi-controller.yaml.
Add document to MAINTAINERS.
Also rk3188.dtsi, rk3288.dtsi, rk3368.dtsi and rk3399.dtsi use an extra fallback string, so change this in the documentation.
Changed:
"rockchip,rk3188-spi", "rockchip,rk3066-spi"
"rockchip,rk3288-spi", "rockchip,rk3066-spi"
"rockchip,rk3368-spi", "rockchip,rk3066-spi"
"rockchip,rk3399-spi", "rockchip,rk3066-spi"
--- .../devicetree/bindings/spi/spi-rockchip.txt | 58 ---------- .../devicetree/bindings/spi/spi-rockchip.yaml | 105 ++++++++++++++++++ MAINTAINERS | 1 + 3 files changed, 106 insertions(+), 58 deletions(-) delete mode 100644 Documentation/devicetree/bindings/spi/spi-rockchip.txt create mode 100644 Documentation/devicetree/bindings/spi/spi-rockchip.yaml
Documentation/devicetree/bindings/spi/spi-rockchip.txt deleted +0 -58
@@ -1,58 +0,0 @@ -* Rockchip SPI Controller - -The Rockchip SPI controller is used to interface with various devices such as flash -and display controllers using the SPI communication interface. - -Required Properties: - -- compatible: should be one of the following. - "rockchip,rv1108-spi" for rv1108 SoCs. - "rockchip,px30-spi", "rockchip,rk3066-spi" for px30 SoCs. - "rockchip,rk3036-spi" for rk3036 SoCS. - "rockchip,rk3066-spi" for rk3066 SoCs. - "rockchip,rk3188-spi" for rk3188 SoCs. - "rockchip,rk3228-spi" for rk3228 SoCS. - "rockchip,rk3288-spi" for rk3288 SoCs. - "rockchip,rk3368-spi" for rk3368 SoCs. - "rockchip,rk3399-spi" for rk3399 SoCs. -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: The interrupt number to the cpu. The interrupt specifier format - depends on the interrupt controller. -- clocks: Must contain an entry for each entry in clock-names. -- clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for - the peripheral clock. -- #address-cells: should be 1. -- #size-cells: should be 0. - -Optional Properties: - -- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, - Documentation/devicetree/bindings/dma/dma.txt -- dma-names: DMA request names should include "tx" and "rx" if present. -- rx-sample-delay-ns: nanoseconds to delay after the SCLK edge before sampling - Rx data (may need to be fine tuned for high capacitance lines). - No delay (0) by default. -- pinctrl-names: Names for the pin configuration(s); may be "default" or - "sleep", where the "sleep" configuration may describe the state - the pins should be in during system suspend. See also - pinctrl/pinctrl-bindings.txt. - - -Example: - - spi0: spi@ff110000 { - compatible = "rockchip,rk3066-spi"; - reg = <0xff110000 0x1000>; - dmas = <&pdma1 11>, <&pdma1 12>; - dma-names = "tx", "rx"; - rx-sample-delay-ns = <10>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; - clock-names = "spiclk", "apb_pclk"; - pinctrl-0 = <&spi1_pins>; - pinctrl-1 = <&spi1_sleep>; - pinctrl-names = "default", "sleep"; - };
Documentation/devicetree/bindings/spi/spi-rockchip.yaml new file +105 -0
105 lines not on this page · raw message
MAINTAINERS +1 -0
@@ -2276,6 +2276,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git S: Maintained F: Documentation/devicetree/bindings/i2c/i2c-rk3x.txt F: Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml +F: Documentation/devicetree/bindings/spi/spi-rockchip.yaml F: arch/arm/boot/dts/rk3* F: arch/arm/boot/dts/rv1108* F: arch/arm/mach-rockchip/
Signature · 1 line
2.20.1