Skip to contentSkip to conversation

dt-bindings: rcar-vin: Convert bindings to json-schema

PATCH Applied Niklas Söderlund 2 participants 2 messages Mar 5, 2020 – Mar 10, 2020

Subsystems (3)
lore
Share & tools
lore

Niklas Söderlund

author maintainer
#0 lore raw

PATCH v3 1/1 dt-bindings: rcar-vin: Convert bindings to json-schema

From: Niklas Söderlund <[email protected]>

Convert Renesas R-Car VIN bindings documentation to json-schema.

As the examples in the bindings now can be tested add a new one which describes how the both a parallel and a CSI-2 source can be connected on Gen3 SoCs.

---
 .../devicetree/bindings/media/renesas,vin.txt | 217 ----------
 .../bindings/media/renesas,vin.yaml           | 402 ++++++++++++++++++
 MAINTAINERS                                   |   2 +-
 3 files changed, 403 insertions(+), 218 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/media/renesas,vin.txt
 create mode 100644 Documentation/devicetree/bindings/media/renesas,vin.yaml
Documentation/devicetree/bindings/media/renesas,vin.txt deleted +0 -217
deleted file mode 100644
index 5eefd62ac5c5b9fd..0000000000000000
@@ -1,217 +0,0 @@
-Renesas R-Car Video Input driver (rcar_vin)
--------------------------------------------
-
-The rcar_vin device provides video input capabilities for the Renesas R-Car
-family of devices.
-
-Each VIN instance has a single parallel input that supports RGB and YUV video,
-with both external synchronization and BT.656 synchronization for the latter.
-Depending on the instance the VIN input is connected to external SoC pins, or
-on Gen3 and RZ/G2 platforms to a CSI-2 receiver.
-
- - compatible: Must be one or more of the following
-   - "renesas,vin-r8a7743" for the R8A7743 device
-   - "renesas,vin-r8a7744" for the R8A7744 device
-   - "renesas,vin-r8a7745" for the R8A7745 device
-   - "renesas,vin-r8a77470" for the R8A77470 device
-   - "renesas,vin-r8a774a1" for the R8A774A1 device
-   - "renesas,vin-r8a774b1" for the R8A774B1 device
-   - "renesas,vin-r8a774c0" for the R8A774C0 device
-   - "renesas,vin-r8a7778" for the R8A7778 device
-   - "renesas,vin-r8a7779" for the R8A7779 device
-   - "renesas,vin-r8a7790" for the R8A7790 device
-   - "renesas,vin-r8a7791" for the R8A7791 device
-   - "renesas,vin-r8a7792" for the R8A7792 device
-   - "renesas,vin-r8a7793" for the R8A7793 device
-   - "renesas,vin-r8a7794" for the R8A7794 device
-   - "renesas,vin-r8a7795" for the R8A7795 device
-   - "renesas,vin-r8a7796" for the R8A7796 device
-   - "renesas,vin-r8a77965" for the R8A77965 device
-   - "renesas,vin-r8a77970" for the R8A77970 device
-   - "renesas,vin-r8a77980" for the R8A77980 device
-   - "renesas,vin-r8a77990" for the R8A77990 device
-   - "renesas,vin-r8a77995" for the R8A77995 device
-   - "renesas,rcar-gen2-vin" for a generic R-Car Gen2 or RZ/G1 compatible
-     device.
-
-   When compatible with the generic version nodes must list the
-   SoC-specific version corresponding to the platform first
-   followed by the generic version.
-
- - reg: the register base and size for the device registers
- - interrupts: the interrupt for the device
- - clocks: Reference to the parent clock
-
-The per-board settings for Gen2 and RZ/G1 platforms:
-
-- port - sub-node describing a single endpoint connected to the VIN
-  from external SoC pins as described in video-interfaces.txt[1].
-  Only the first one will be considered as each vin interface has one
-  input port.
-
-  - Optional properties for endpoint nodes:
-    - hsync-active: see [1] for description. Default is active high.
-    - vsync-active: see [1] for description. Default is active high.
-      If both HSYNC and VSYNC polarities are not specified, embedded
-      synchronization is selected.
-    - field-active-even: see [1] for description. Default is active high.
-    - bus-width: see [1] for description. The selected bus width depends on
-      the SoC type and selected input image format.
-      Valid values are: 8, 10, 12, 16, 24 and 32.
-    - data-shift: see [1] for description. Valid values are 0 and 8.
-    - data-enable-active: polarity of CLKENB signal, see [1] for
-      description. Default is active high.
-
-The per-board settings for Gen3 and RZ/G2 platforms:
-
-Gen3 and RZ/G2 platforms can support both a single connected parallel input
-source from external SoC pins (port@0) and/or multiple parallel input sources
-from local SoC CSI-2 receivers (port@1) depending on SoC.
-
-- renesas,id - ID number of the VIN, VINx in the documentation.
-- ports
-    - port@0 - sub-node describing a single endpoint connected to the VIN
-      from external SoC pins as described in video-interfaces.txt[1].
-      Describing more than one endpoint in port@0 is invalid. Only VIN
-      instances that are connected to external pins should have port@0.
-
-      Endpoint nodes of port@0 support the optional properties listed in
-      the Gen2 per-board settings description.
-
-    - port@1 - sub-nodes describing one or more endpoints connected to
-      the VIN from local SoC CSI-2 receivers. The endpoint numbers must
-      use the following schema.
-
-        - endpoint@0 - sub-node describing the endpoint connected to CSI20
-        - endpoint@1 - sub-node describing the endpoint connected to CSI21
-        - endpoint@2 - sub-node describing the endpoint connected to CSI40
-        - endpoint@3 - sub-node describing the endpoint connected to CSI41
-
-      Endpoint nodes of port@1 do not support any optional endpoint property.
-
-Device node example for Gen2 platforms
---------------------------------------
-
-        aliases {
-                vin0 = &vin0;
-        };
-
-        vin0: vin@e6ef0000 {
-                compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin";
-                clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
-                reg = <0 0xe6ef0000 0 0x1000>;
-                interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
-                status = "disabled";
-        };
-
-Board setup example for Gen2 platforms (vin1 composite video input)
--------------------------------------------------------------------
-
-&i2c2   {
-        status = "okay";
-        pinctrl-0 = <&i2c2_pins>;
-        pinctrl-names = "default";
-
-        adv7180@20 {
-                compatible = "adi,adv7180";
-                reg = <0x20>;
-                remote = <&vin1>;
-
-                port {
-                        adv7180: endpoint {
-                                bus-width = <8>;
-                                remote-endpoint = <&vin1ep0>;
-                        };
-                };
-        };
-};
-
-/* composite video input */
-&vin1 {
-        pinctrl-0 = <&vin1_pins>;
-        pinctrl-names = "default";
-
-        status = "okay";
-
-        port {
-                vin1ep0: endpoint {
-                        remote-endpoint = <&adv7180>;
-                        bus-width = <8>;
-                };
-        };
-};
-
-Device node example for Gen3 platforms
---------------------------------------
-
-        vin0: video@e6ef0000 {
-                compatible = "renesas,vin-r8a7795";
-                reg = <0 0xe6ef0000 0 0x1000>;
-                interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-                clocks = <&cpg CPG_MOD 811>;
-                power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-                resets = <&cpg 811>;
-                renesas,id = <0>;
-
-                ports {
-                        #address-cells = <1>;
-                        #size-cells = <0>;
-
-                        port@1 {
-                                #address-cells = <1>;
-                                #size-cells = <0>;
-
-                                reg = <1>;
-
-                                vin0csi20: endpoint@0 {
-                                        reg = <0>;
-                                        remote-endpoint= <&csi20vin0>;
-                                };
-                                vin0csi21: endpoint@1 {
-                                        reg = <1>;
-                                        remote-endpoint= <&csi21vin0>;
-                                };
-                                vin0csi40: endpoint@2 {
-                                        reg = <2>;
-                                        remote-endpoint= <&csi40vin0>;
-                                };
-                        };
-                };
-        };
-
-        csi20: csi2@fea80000 {
-                compatible = "renesas,r8a7795-csi2";
-                reg = <0 0xfea80000 0 0x10000>;
-                interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-                clocks = <&cpg CPG_MOD 714>;
-                power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-                resets = <&cpg 714>;
-
-                ports {
-                        #address-cells = <1>;
-                        #size-cells = <0>;
-
-                        port@0 {
-                                reg = <0>;
-                                csi20_in: endpoint {
-                                        clock-lanes = <0>;
-                                        data-lanes = <1>;
-                                        remote-endpoint = <&adv7482_txb>;
-                                };
-                        };
-
-                        port@1 {
-                                #address-cells = <1>;
-                                #size-cells = <0>;
-
-                                reg = <1>;
-
-                                csi20vin0: endpoint@0 {
-                                        reg = <0>;
-                                        remote-endpoint = <&vin0csi20>;
-                                };
-                        };
-                };
-        };
-
-[1] video-interfaces.txt common video media interface
Documentation/devicetree/bindings/media/renesas,vin.yaml new file +402 -0

402 lines not on this page · raw message

MAINTAINERS +1 -1
index 6158a143a13e075c..78f1ee2f091f8ff4 100644
@@ -10435,7 +10435,7 @@ L:	[email protected]
 T:	git git://linuxtv.org/media_tree.git
 S:	Supported
 F:	Documentation/devicetree/bindings/media/renesas,csi2.yaml
-F:	Documentation/devicetree/bindings/media/renesas,vin.txt
+F:	Documentation/devicetree/bindings/media/renesas,vin.yaml
 F:	drivers/media/platform/rcar-vin/
 
 MEDIA DRIVERS FOR RENESAS - VSP1
Signature · 1 line
2.25.1
maintainer Applied
#1 lore raw
Quoted 10 lines · On Thu, 5 Mar 2020 01:55:37 +0100, =?UTF-8?q?Niklas=20S=C3=B6derlund?= wrote:

From: Niklas Söderlund <[email protected]>

Convert Renesas R-Car VIN bindings documentation to json-schema.

As the examples in the bindings now can be tested add a new one which describes how the both a parallel and a CSI-2 source can be connected on Gen3 SoCs.

Quoted 8 lines
---
 .../devicetree/bindings/media/renesas,vin.txt | 217 ----------
 .../bindings/media/renesas,vin.yaml           | 402 ++++++++++++++++++
 MAINTAINERS                                   |   2 +-
 3 files changed, 403 insertions(+), 218 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/media/renesas,vin.txt
 create mode 100644 Documentation/devicetree/bindings/media/renesas,vin.yaml

Applied, thanks.

Rob