HID: core: fix off-by-one memset in hid_report_raw_event()
Subsystems (6)
Sasha Levin
maintainerPATCH 1/7 HID: core: fix off-by-one memset in hid_report_raw_event()
From: Johan Korsnes <[email protected]>
[ Upstream commit 5ebdffd25098898aff1249ae2f7dbfddd76d8f8f ]
In case a report is greater than HID_MAX_BUFFER_SIZE, it is truncated, but the report-number byte is not correctly handled. This results in a off-by-one in the following memset, causing a kernel Oops and ensuing system crash.
Note: With commit 8ec321e96e05 ("HID: Fix slab-out-of-bounds read in hid_field_extract") I no longer hit the kernel Oops as we instead fail "controlled" at probe if there is a report too long in the HID report-descriptor. hid_report_raw_event() is an exported symbol, so presumabely we cannot always rely on this being the case.
function.")
--- drivers/hid/hid-core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/hid/hid-core.c +3 -1
@@ -1508,7 +1508,9 @@ int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, u32 size, rsize = ((report->size -1 ) >>3 ) +1 ; -if (rsize >HID_MAX_BUFFER_SIZE ) +if (report_enum->numbered && rsize >=HID_MAX_BUFFER_SIZE ) + rsize =HID_MAX_BUFFER_SIZE -1 ; +else if (rsize >HID_MAX_BUFFER_SIZE ) rsize =HID_MAX_BUFFER_SIZE ;if (csize < rsize) {
Signature · 1 line
2.20.1
Sasha Levin
maintainerPATCH 2/7 HID: core: increase HID report buffer size to 8KiB
From: Johan Korsnes <[email protected]>
[ Upstream commit 84a4062632462c4320704fcdf8e99e89e94c0aba ]
We have a HID touch device that reports its opens and shorts test results in HID buffers of size 8184 bytes. The maximum size of the HID buffer is currently set to 4096 bytes, causing probe of this device to fail. With this patch we increase the maximum size of the HID buffer to 8192 bytes, making device probe and acquisition of said buffers succeed.
--- include/linux/hid.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/linux/hid.h +1 -1
@@ -451,7 +451,7 @@ struct hid_report_enum { };#define HID_MIN_BUFFER_SIZE 64/* make sure there is at least a packet size of space */ -#define HID_MAX_BUFFER_SIZE 4096/* 4kb */ +#define HID_MAX_BUFFER_SIZE 8192/* 8kb */ #define HID_CONTROL_FIFO_SIZE 256/* to init devices with >100 reports */ #define HID_OUTPUT_FIFO_SIZE 64
Signature · 1 line
2.20.1
Sasha Levin
maintainerPATCH 3/7 MIPS: VPE: Fix a double free and a memory leak in 'release_vpe()'
In reply to Sasha LevinFrom: Christophe JAILLET <[email protected]>
[ Upstream commit bef8e2dfceed6daeb6ca3e8d33f9c9d43b926580 ]
Pointer on the memory allocated by 'alloc_progmem()' is stored in 'v->load_addr'. So this is this memory that should be freed by 'release_progmem()'.
'release_progmem()' is only a call to 'kfree()'.
With the current code, there is both a double free and a memory leak. Fix it by passing the correct pointer to 'release_progmem()'.
--- arch/mips/kernel/vpe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/mips/kernel/vpe.c +1 -1
@@ -134,7 +134,7 @@ void release_vpe(struct vpe *v) {list_del (&v->list);if (v->load_addr) -release_progmem (v); +release_progmem (v->load_addr);kfree (v); }
Signature · 1 line
2.20.1
Sasha Levin
maintainerPATCH 4/7 net: ks8851-ml: Fix IRQ handling and locking
In reply to Sasha LevinFrom: Marek Vasut <[email protected]>
[ Upstream commit 44343418d0f2f623cb9da6f5000df793131cbe3b ]
The KS8851 requires that packet RX and TX are mutually exclusive. Currently, the driver hopes to achieve this by disabling interrupt from the card by writing the card registers and by disabling the interrupt on the interrupt controller. This however is racy on SMP.
Replace this approach by expanding the spinlock used around the ks_start_xmit() TX path to ks_irq() RX path to assure true mutual exclusion and remove the interrupt enabling/disabling, which is now not needed anymore. Furthermore, disable interrupts also in ks_net_stop(), which was missing before.
Note that a massive improvement here would be to re-use the KS8851 driver approach, which is to move the TX path into a worker thread, interrupt handling to threaded interrupt, and synchronize everything with mutexes, but that would be a much bigger rework, for a separate patch.
--- drivers/net/ethernet/micrel/ks8851_mll.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
drivers/net/ethernet/micrel/ks8851_mll.c +8 -6
@@ -866,14 +866,17 @@ static irqreturn_t ks_irq(int irq, void *pw) {struct net_device *netdev = pw;struct ks_net *ks =netdev_priv (netdev); +unsigned long flags;u16 status; +spin_lock_irqsave (&ks->statelock, flags);/*this should be the first in IRQ handler */ ks_save_cmd_reg (ks); status =ks_rdreg16 (ks,KS_ISR );if (unlikely (!status)) {ks_restore_cmd_reg (ks); +spin_unlock_irqrestore (&ks->statelock, flags);return IRQ_NONE ; }
@@ -899,6 +902,7 @@ static irqreturn_t ks_irq(int irq, void *pw) ks->netdev->stats.rx_over_errors++;/* this should be the last in IRQ handler*/ ks_restore_cmd_reg (ks); +spin_unlock_irqrestore (&ks->statelock, flags);return IRQ_HANDLED ; }
@@ -968,6 +972,7 @@ static int ks_net_stop(struct net_device *netdev)/* shutdown RX/TX QMU */ ks_disable_qmu (ks); +ks_disable_int (ks);/* set powermode to soft power down to save power */ ks_set_powermode (ks,PMECR_PM_SOFTDOWN );
@@ -1024,10 +1029,9 @@ static netdev_tx_t ks_start_xmit(struct sk_buff *skb, struct net_device *netdev) {netdev_tx_t retv =NETDEV_TX_OK ;struct ks_net *ks =netdev_priv (netdev); +unsigned long flags; -disable_irq (netdev->irq); -ks_disable_int (ks); -spin_lock (&ks->statelock); +spin_lock_irqsave (&ks->statelock, flags);/* Extra space are required: * 4 byte for alignment, 4 for status/length, 4 for CRC
@@ -1041,9 +1045,7 @@ static netdev_tx_t ks_start_xmit(struct sk_buff *skb, struct net_device *netdev)dev_kfree_skb (skb); }else retv =NETDEV_TX_BUSY ; -spin_unlock (&ks->statelock); -ks_enable_int (ks); -enable_irq (netdev->irq); +spin_unlock_irqrestore (&ks->statelock, flags);return retv; }
Signature · 1 line
2.20.1