verdin-imx8mm: adjust dram size in case bl32 is used
PATCH 1/3 verdin-imx8mm: adjust dram size in case bl32 is used
From: Igor Opaniuk <[email protected]>
Adjust DRAM size in case BL32 secure payload is loaded (OP-TEE/Trusty), so during MMU initialization U-Boot won't touch this mem area.
BL32 is loaded to the end of DRAM, bl32 payload size is read from rom_pointer[1]. This relates to the issue described in 59efa6b52b("imx8m: Fix MMU table issue for OPTEE memory").
---
board/toradex/verdin-imx8mm/verdin-imx8mm.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
board/toradex/verdin-imx8mm/verdin-imx8mm.c +6 -1
@@ -5,6 +5,7 @@#include <common.h> #include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> #include <asm/io.h> #include <miiphy.h> #include <netdev.h>
@@ -13,7 +14,11 @@ DECLARE_GLOBAL_DATA_PTR;int dram_init (void ) { - gd->ram_size =get_ram_size ((void *)PHYS_SDRAM ,PHYS_SDRAM_SIZE ); +/* rom_pointer[1] contains the size of TEE occupies */ +if (rom_pointer[1 ]) + gd->ram_size =PHYS_SDRAM_SIZE - rom_pointer[1 ]; +else + gd->ram_size =PHYS_SDRAM_SIZE ;return 0 ; }
Signature · 1 line
2.17.1
PATCH 2/3 imx8mm_evk: adjust dram size in case bl32 is used
From: Igor Opaniuk <[email protected]>
Adjust DRAM size in case BL32 secure payload is loaded (OP-TEE/Trusty), so during MMU initialization U-Boot won't touch this mem area.
BL32 is loaded to the end of DRAM, bl32 payload size is read from rom_pointer[1]. This relates to the issue described in 59efa6b52b("imx8m: Fix MMU table issue for OPTEE memory").
---
board/freescale/imx8mm_evk/imx8mm_evk.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
board/freescale/imx8mm_evk/imx8mm_evk.c +5 -1
@@ -15,7 +15,11 @@ DECLARE_GLOBAL_DATA_PTR;int dram_init (void ) { - gd->ram_size =PHYS_SDRAM_SIZE ; +/* rom_pointer[1] contains the size of TEE occupies */ +if (rom_pointer[1 ]) + gd->ram_size =PHYS_SDRAM_SIZE - rom_pointer[1 ]; +else + gd->ram_size =PHYS_SDRAM_SIZE ;return 0 ; }
Signature · 1 line
2.17.1
PATCH 3/3 verdin-imx8mm: add nfsboot wrapper to env
In reply to Igor OpaniukFrom: Igor Opaniuk <[email protected]>
Add nfsboot wrapper to env to boot Linux kernel from TFTP/NFS.
---
include/configs/verdin-imx8mm.h | 6 ++++++ 1 file changed, 6 insertions(+)
include/configs/verdin-imx8mm.h +6 -0
@@ -66,6 +66,12 @@"initrd_addr=0x43800000\0" \"initrd_high=0xffffffffffffffff\0" \"kernel_image=Image\0" \ +"netargs=setenv bootargs console=${console},${baudrate} " \ +"root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \ +"\0" \ +"nfsboot=run netargs; dhcp ${loadaddr} ${kernel_image}; " \ +"tftp ${fdt_addr} verdin/${fdtfile}; " \ +"booti ${loadaddr} - ${fdt_addr}\0" \"setup=setenv setupargs console=${console},${baudrate} " \"console=tty1 consoleblank=0 earlycon\0" \"update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
Signature · 1 line
2.17.1