arm64: dts: enable fspi in imx8mm dts
Subsystems (2)
PATCH v3 1/1 arm64: dts: enable fspi in imx8mm dts
Pull in upstream patch from NXP repo to:
enable fspi in imx8mm DT file
Signed-off-by Han Xu <[email protected]>
Signed-off-by Adam Ford <[email protected]>
---
V3: Move flexspi to order the unit address.
V2: Reorder s-o-b lines to give credit in proper order.
arch/arm64/boot/dts/freescale/imx8mm.dtsi +15 -1
@@ -558,7 +558,8 @@ aips3: bus@30800000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x30800000 0x30800000 0x400000>; + ranges = <0x30800000 0x30800000 0x400000>, + <0x8000000 0x8000000 0x10000000>; ecspi1: spi@30820000 { compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
@@ -760,6 +761,19 @@ usdhc3: mmc@30b60000 { status = "disabled"; }; + flexspi: spi@30bb0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,imx8mm-fspi"; + reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>; + reg-names = "fspi_base", "fspi_mmap"; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_QSPI_ROOT>, + <&clk IMX8MM_CLK_QSPI_ROOT>; + clock-names = "fspi", "fspi_en"; + status = "disabled"; + }; + sdma1: dma-controller@30bd0000 { compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma"; reg = <0x30bd0000 0x10000>;
Signature · 1 line
2.25.0
Quoted 5 lines · Adam Ford
Pull in upstream patch from NXP repo to:
enable fspi in imx8mm DT fileSigned-off-by Han Xu <[email protected]>Signed-off-by Adam Ford <[email protected]>
I reworded the commit log a bit and applied patch.
Shawn
Shawn Guo
AppliedQuoted 5 lines · Adam Ford
Pull in upstream patch from NXP repo to:
enable fspi in imx8mm DT fileSigned-off-by Han Xu <[email protected]>Signed-off-by Adam Ford <[email protected]>
Applied, thanks.