arm: imx: Add support for Google's Coral Dev Board
Subsystems (3)
PATCH 1/1 arm: imx: Add support for Google's Coral Dev Board
Add initial support for Google's Coral Dev Board based on i.MX8MQ.
https://coral.ai/products/dev-board
The Phanbell naming has been used here to match the naming convention used in Google's U-Boot source tree:
https://coral.googlesource.com/uboot-imx/
--- arch/arm/dts/Makefile | 1 + arch/arm/dts/imx8mq-phanbell.dts | 417 ++++ arch/arm/mach-imx/imx8m/Kconfig | 6 + board/google/imx8mq_phanbell/Kconfig | 12 + board/google/imx8mq_phanbell/MAINTAINERS | 8 + board/google/imx8mq_phanbell/Makefile | 11 + board/google/imx8mq_phanbell/README | 37 + .../google/imx8mq_phanbell/imx8mq_phanbell.c | 100 + .../google/imx8mq_phanbell/lpddr4_timing_1g.c | 1731 +++++++++++++++++ board/google/imx8mq_phanbell/spl.c | 180 ++ configs/imx8mq_phanbell_defconfig | 52 + include/configs/imx8mq_phanbell.h | 216 ++ 12 files changed, 2771 insertions(+) create mode 100644 arch/arm/dts/imx8mq-phanbell.dts create mode 100644 board/google/imx8mq_phanbell/Kconfig create mode 100644 board/google/imx8mq_phanbell/MAINTAINERS create mode 100644 board/google/imx8mq_phanbell/Makefile create mode 100644 board/google/imx8mq_phanbell/README create mode 100644 board/google/imx8mq_phanbell/imx8mq_phanbell.c create mode 100644 board/google/imx8mq_phanbell/lpddr4_timing_1g.c create mode 100644 board/google/imx8mq_phanbell/spl.c create mode 100644 configs/imx8mq_phanbell_defconfig create mode 100644 include/configs/imx8mq_phanbell.h
arch/arm/dts/Makefile +1 -0
@@ -721,6 +721,7 @@ dtb-$(CONFIG_ARCH_IMX8M) += \ imx8mm-verdin.dtb \ imx8mn-ddr4-evk.dtb \ imx8mq-evk.dtb \ + imx8mq-phanbell.dtb \ imx8mp-evk.dtb dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb
arch/arm/dts/imx8mq-phanbell.dts new file +417 -0
417 lines not on this page · raw message
arch/arm/mach-imx/imx8m/Kconfig +6 -0
@@ -32,6 +32,11 @@ config TARGET_IMX8MQ_EVK select IMX8MQ select IMX8M_LPDDR4 +config TARGET_IMX8MQ_PHANBELL + bool "imx8mq_phanbell" + select IMX8MQ + select IMX8M_LPDDR4 + config TARGET_IMX8MM_EVK bool "imx8mm LPDDR4 EVK board" select IMX8MM
@@ -62,6 +67,7 @@ source "board/freescale/imx8mq_evk/Kconfig" source "board/freescale/imx8mm_evk/Kconfig" source "board/freescale/imx8mn_evk/Kconfig" source "board/freescale/imx8mp_evk/Kconfig" +source "board/google/imx8mq_phanbell/Kconfig" source "board/toradex/verdin-imx8mm/Kconfig" endif
board/google/imx8mq_phanbell/Kconfig new file +12 -0
@@ -0,0 +1,12 @@ +if TARGET_IMX8MQ_PHANBELL + +config SYS_BOARD + default "imx8mq_phanbell" + +config SYS_VENDOR + default "google" + +config SYS_CONFIG_NAME + default "imx8mq_phanbell" + +endif
board/google/imx8mq_phanbell/MAINTAINERS new file +8 -0
@@ -0,0 +1,8 @@ +i.MX 8MQ PHANBELL BOARD +M: Fabio Estevam <[email protected]> +M: Marco Franchi <[email protected]> +M: Alifer Moraes <[email protected]> +S: Maintained +F: board/google/imx8mq_phanbell/ +F: include/configs/imx8mq_phanbell.h +F: configs/imx8mq_phanbell_defconfig
board/google/imx8mq_phanbell/Makefile new file +11 -0
@@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright 2020 NXP +# + +obj-y += imx8mq_phanbell.o + +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing_1g.o +endif
board/google/imx8mq_phanbell/README new file +37 -0
@@ -0,0 +1,37 @@ +U-Boot for Google's i.MX8MQ Phanbell board + +Quick Start +=========== +- Build the ARM Trusted firmware binary +- Get ddr and hdmi firmware +- Build U-Boot +- Boot + +Get and Build the ARM Trusted firmware +====================================== +Note: srctree is U-Boot source directory +Get ATF from: https://source.codeaurora.org/external/imx/imx-atf +branch: imx_4.19.35_1.0.0 +$ make PLAT=imx8mq bl31 +$ cp build/imx8mq/release/bl31.bin $(builddir) + +Get the ddr and hdmi firmware +============================= +$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.9.bin +$ chmod +x firmware-imx-7.9.bin +$ ./firmware-imx-7.9.bin +$ cp firmware-imx-7.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(builddir) +$ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir) + +Build U-Boot +============ +$ export CROSS_COMPILE=aarch64-linux-gnu- +$ make imx8mq_phanbell_defconfig +$ make flash.bin + +Burn the flash.bin to MicroSD card offset 33KB +$sudo dd if=flash.bin of=/dev/sd[x] bs=1K seek=33 + +Boot +==== +Set Boot switch SW1: 1011 to boot from Micro SD.
board/google/imx8mq_phanbell/imx8mq_phanbell.c new file +100 -0
100 lines not on this page · raw message
board/google/imx8mq_phanbell/lpddr4_timing_1g.c new file +1731 -0
1,731 lines not on this page · raw message
board/google/imx8mq_phanbell/spl.c new file +180 -0
180 lines not on this page · raw message
configs/imx8mq_phanbell_defconfig new file +52 -0
52 lines not on this page · raw message
include/configs/imx8mq_phanbell.h new file +216 -0
216 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH 1/1 arm: imx: Add support for Google's Coral Dev Board
Thanks Alifer!
I just followed the README, and it working very well.
Congratulations!
Fabio Estevam
reviewerPATCH 1/1 arm: imx: Add support for Google's Coral Dev Board
Hi Marco,
Quoted 8 lines · Marco Franchi
Thanks Alifer!
I just followed the README, and it working very well.
Congratulations!
Tested-by marcofrk at gmail.com
Thanks for testing.
The correct style for the Tested-by tag is:
I think Stefano will pick this patch and could fix the tag while applying it.
Thanks
PATCH 1/1 arm: imx: Add support for Google's Coral Dev Board
Quoted 12 lines · Fabio Estevam
Hi Marco,
Quoted 8 lines · Marco Franchi
Thanks Alifer!
I just followed the README, and it working very well.
Congratulations!
Tested-by marcofrk at gmail.com
Quoted 8 lines
Thanks for testing.
The correct style for the Tested-by tag is:
Tested-by Marco Franchi <[email protected]>I think Stefano will pick this patch and could fix the tag while applying it.
Yes, I will fix myself.
Stefano
Quoted 2 lines
Thanks
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 1/1 arm: imx: Add support for Google's Coral Dev Board
In reply to Alifer MoraesQuoted 9 lines
Add initial support for Google's Coral Dev Board based on i.MX8MQ.
https://coral.ai/products/dev-board
The Phanbell naming has been used here to match the naming convention used in Google's U-Boot source tree:
https://coral.googlesource.com/uboot-imx/Co-developed-by Fabio Estevam <[email protected]>Signed-off-by Alifer Moraes <[email protected]>Tested-by marcofrk at gmail.comTested-by Marco Franchi <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================