docs: Add RX target.
PATCH 1/1 docs: Add RX target.
Add rx-virt target specificaion document.
--- docs/system/target-rx.rst | 35 +++++++++++++++++++++++++++++++++++ docs/system/targets.rst | 1 + 2 files changed, 36 insertions(+) create mode 100644 docs/system/target-rx.rst
docs/system/target-rx.rst new file +35 -0
@@ -0,0 +1,35 @@ +.. _RX-System-emulator: + +RX System emulator +-------------------- + +Use the executable ``qemu-system-rx`` to simulate a Virtual RX target. +This target emulated following devices. + +- R5F562N8 MCU + + - On-chip memory (ROM 512KB, RAM 96KB) + - Interrupt Control Unit (ICUa) + - 8Bit Timer x 1CH (TMR0,1) + - Compare Match Timer x 2CH (CMT0,1) + - Serial Communication Interface x 1CH (SCI0) + +- External memory 16MByte + +Example of ``qemu-system-rx`` usage for RX is shown below: + +Download ``<u-boot_image_file>`` from +https://osdn.net/users/ysato/pf/qemu/dl/u-boot.bin.gz + +Start emulation of rx-virt:: + qemu-system-rx -bios <u-boot_image_file> + +Download ``kernel_image_file`` from +https://osdn.net/users/ysato/pf/qemu/dl/zImage + +Download ``device_tree_blob`` from +https://osdn.net/users/ysato/pf/qemu/dl/rx-virt.dtb + +Start emulation of rx-virt:: + qemu-system-rx -kernel <kernel_image_file> -dtb <device_tree_blob> \ + -append "earlycon"
docs/system/targets.rst +1 -0
@@ -17,3 +17,4 @@ Contents: target-arm target-m68k target-xtensa + target-rx
Signature · 1 line
2.20.1
Quoted 1 line · Yoshinori Sato
Add rx-virt target specificaion document.
specification
Quoted 14 lines
Signed-off-by Yoshinori Sato <[email protected]>--- docs/system/target-rx.rst | 35 +++++++++++++++++++++++++++++++++++ docs/system/targets.rst | 1 + 2 files changed, 36 insertions(+)create mode 100644
docs/system/target-rx.rstdocs/system/target-rx.rst new file +0
-0
docs/system/target-rx.rst line 7
Quoted 7 lines
docs/system/target-rx.rst new file +7
-0@@ -0,0 +1,35 @@ +.. _RX-System-emulator: + +RX System emulator +-------------------- + +Use the executable ``qemu-system-rx`` to simulate a Virtual RX target. +This target emulated following devices.
s/emulated/emulates the/
docs/system/target-rx.rst Contents: · line 20
Quoted 6 lines
docs/system/target-rx.rst new file +2
-0+++ b/docs/system/targets.rst@@ -17,3 +17,4 @@ Contents: target-arm target-m68k target-xtensa + target-rx
Is it worth keeping this list alphabetically sorted?
Signature · 3 lines
Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3226 Virtualization: qemu.org | libvirt.org
2020-03-10 00:07 に Eric Blake さんは書きました:
Quoted 13 lines · Yoshinori Sato
Quoted 1 line
Add rx-virt target specificaion document.
specification
Quoted 8 lines
Signed-off-by Yoshinori Sato <[email protected]>--- docs/system/target-rx.rst | 35 +++++++++++++++++++++++++++++++++++ docs/system/targets.rst | 1 + 2 files changed, 36 insertions(+)create mode 100644
docs/system/target-rx.rst
Quoted 17 lines
Quoted 12 lines
docs/system/target-rx.rst new file +6
-0@@ -0,0 +1,35 @@ +.. _RX-System-emulator: + +RX System emulator +-------------------- + +Use the executable ``qemu-system-rx`` to simulate a Virtual RXQuoted 2 lines
target.
+This target emulated following devices.s/emulated/emulates the/
OK. I'll fix it.
Quoted 9 lines
docs/system/target-rx.rst Contents: · line 20
Quoted 7 lines
+++
b/docs/system/targets.rstdocs/system/target-rx.rst new file +1
-0@@ -17,3 +17,4 @@ Contents: target-arm target-m68k target-xtensa + target-rxIs it worth keeping this list alphabetically sorted?
It was not in alphabetical order, it was added at the last. Is it better to arrange in alphabetical order?
---
Yoshinori Sato
Quoted 10 lines · Yoshinori Sato
Quoted 8 lines
Quoted 6 lines
+++
b/docs/system/targets.rst(quoted diff) +0
-0@@ -17,3 +17,4 @@ Contents:target-arm
target-m68k
target-xtensa
+ target-rxIs it worth keeping this list alphabetically sorted?
It was not in alphabetical order, it was added at the last. Is it better to arrange in alphabetical order?
The 3 lines of context was alphabetical, but looking at the whole file, the overall list is not. So sticking yours last is fine after all.
Signature · 3 lines
Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3226 Virtualization: qemu.org | libvirt.org
Quoted 12 lines · Eric Blake
Quoted 9 lines · Yoshinori Sato
Quoted 8 lines
docs/system/targets.rst Contents: · line 20
Quoted 6 lines
+++
b/docs/system/targets.rstdocs/system/targets.rst +1
-0@@ -17,3 +17,4 @@ Contents: target-arm target-m68k target-xtensa + target-rxIs it worth keeping this list alphabetically sorted?
Quoted 5 lines
Quoted 2 lines
It was not in alphabetical order, it was added at the last. Is it better to arrange in alphabetical order?
The 3 lines of context was alphabetical, but looking at the whole file, the overall list is not. So sticking yours last is fine after all.
In an ideal world the correct order would probably be "alphabetical order of the headline titles in the referenced files", so that the displayed ToC is alphabetized.
thanks
-- PMM
Quoted 17 lines · Peter Maydell
Quoted 15 lines · Eric Blake
Quoted 11 lines · Yoshinori Sato
Quoted 8 lines
docs/system/targets.rst Contents: · line 20
Quoted 6 lines
+++
b/docs/system/targets.rstdocs/system/targets.rst +1
-0@@ -17,3 +17,4 @@ Contents: target-arm target-m68k target-xtensa + target-rxIs it worth keeping this list alphabetically sorted?
It was not in alphabetical order, it was added at the last. Is it better to arrange in alphabetical order?
Quoted 6 lines
Quoted 2 lines
The 3 lines of context was alphabetical, but looking at the whole file, the overall list is not. So sticking yours last is fine after all.
In an ideal world the correct order would probably be "alphabetical order of the headline titles in the referenced files", so that the displayed ToC is alphabetized.
OK.
Change to alphabetical order.
Quoted 2 lines
thanks
-- PMM
Signature · 1 line
Yosinori Sato