arm64: dts: increase the QSPI reg address for Stratix10 and Agilex
Subsystems (2)
PATCH 1/1 arm64: dts: increase the QSPI reg address for Stratix10 and Agilex
From: Joyce Ooi <[email protected]>
This patch increases the reg addresses for QSPI boot and QSPI rootfs for Stratix10 and Agilex to cater for the increased size of kernel Image.
Signed-off-by Joyce Ooi <[email protected]>
--- .../boot/dts/altera/socfpga_stratix10_socdk.dts | 6 +++--- arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-)
arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +3 -3
@@ -178,12 +178,12 @@ qspi_boot: partition@0 { label = "Boot and fpga data"; - reg = <0x0 0x034B0000>; + reg = <0x0 0x03FE0000>; }; - qspi_rootfs: partition@4000000 { + qspi_rootfs: partition@3FE0000 { label = "Root Filesystem - JFFS2"; - reg = <0x034B0000 0x0EB50000>; + reg = <0x03FE0000 0x0C020000>; }; }; };
arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts +3 -3
@@ -129,12 +129,12 @@ qspi_boot: partition@0 { label = "Boot and fpga data"; - reg = <0x0 0x034B0000>; + reg = <0x0 0x03FE0000>; }; - qspi_rootfs: partition@34B0000 { + qspi_rootfs: partition@3FE0000 { label = "Root Filesystem - JFFS2"; - reg = <0x034B0000 0x0EB50000>; + reg = <0x03FE0000 0x0C020000>; }; }; };
Signature · 1 line
1.7.1
Quoted 17 lines · Joyce
From: Joyce Ooi <[email protected]>
This patch increases the reg addresses for QSPI boot and QSPI rootfs for Stratix10 and Agilex to cater for the increased size of kernel Image.
Signed-off-by Joyce Ooi <[email protected]>--- .../boot/dts/altera/socfpga_stratix10_socdk.dts | 6 +++--- arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-)arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +0
-0@@ -178,12 +178,12 @@
arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts line 186
Quoted 10 lines
arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +2
-2qspi_boot: partition@0 { label = "Boot and fpga data"; - reg = <0x0 0x034B0000>; + reg = <0x0 0x03FE0000>; }; - qspi_rootfs: partition@4000000 { + qspi_rootfs: partition@3FE0000 { label = "Root Filesystem - JFFS2";
Applied, thanks!
Dinh