Mellanox, mlx5 updates 2020-03-09
Hi Dave,
This series adds misc updates and cleanups to mlx5 drivers. For more information please see tag log below.
Please pull and let me know if there is any problem.
Please note that the series starts with a merge of mlx5-next branch, to resolve and avoid dependency with rdma tree.
Thanks,
Saeed.
---
The following changes since commit a70ed9d8ecf395ca7d15c2d13782cc0055398ed5:
Merge branch 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux (2020-03-09 16:58:26 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux.git tags/mlx5-updates-2020-03-09
for you to fetch changes up to b63293e759a1dd1d105f4c6c32d7ed150b6af8d2:
net/mlx5e: Show/set Rx network flow classification rules on ul rep (2020-03-09 16:58:49 -0700)
----------------------------------------------------------------
mlx5-updates-2020-03-09
This series provides updates to mlx5 driver:
1) Use vport metadata matching only when mandatory
2) Introduce root flow table and ethtool steering for uplink representors
3) Expose port speed via FW when link modes are not available
3) Misc cleanups
----------------------------------------------------------------
Dan Carpenter (1):
net/mlx5e: Fix an IS_ERR() vs NULL check
Eli Cohen (1):
net/mlx5: Verify goto chain offload support
Majd Dibbiny (1):
net/mlx5: E-Switch, Use vport metadata matching only when mandatory
Mark Bloch (2):
net/mlx5: Expose port speed when possible net/mlx5: Tidy up and fix reverse christmas ordring
Parav Pandit (1):
net/mlx5: E-switch, make query inline mode a static function
Paul Blakey (1):
net/mlx5: Allocate smaller size tables for ft offload
Saeed Mahameed (1):
net/mlx5e: Introduce root ft concept for representors netdevs
Vlad Buslov (3):
net/mlx5e: Show/set Rx flow indir table and RSS hash key on ul rep net/mlx5e: Init ethtool steering for representors net/mlx5e: Show/set Rx network flow classification rules on ul rep
drivers/net/ethernet/mellanox/mlx5/core/en.h | 6 + .../net/ethernet/mellanox/mlx5/core/en_ethtool.c | 37 ++++--- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 122 ++++++++++++--------- drivers/net/ethernet/mellanox/mlx5/core/en_rep.h | 1 + drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 65 +++++++---- drivers/net/ethernet/mellanox/mlx5/core/eswitch.h | 1 - .../ethernet/mellanox/mlx5/core/eswitch_offloads.c | 90 ++++++++------- .../mellanox/mlx5/core/eswitch_offloads_chains.c | 5 +- drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 4 +- 9 files changed, 202 insertions(+), 129 deletions(-)
PATCH 1/11 net/mlx5: Expose port speed when possible
From: Mark Bloch <[email protected]>
When port speed can't be reported based on ext_eth_proto_capability or eth_proto_capability instead of reporting speed as unknown check if the port's speed can be inferred based on the data_rate_oper field.
--- drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +8 -2
@@ -773,6 +773,7 @@ static void ptys2ethtool_supported_advertised_port(struct ethtool_link_ksettingsstatic void get_speed_duplex (struct net_device *netdev,u32 eth_proto_oper,bool force_legacy, +u16 data_rate_oper,struct ethtool_link_ksettings *link_ksettings) {struct mlx5e_priv *priv =netdev_priv (netdev);
@@ -784,7 +785,10 @@ static void get_speed_duplex(struct net_device *netdev, speed =mlx5e_port_ptys2speed (priv->mdev, eth_proto_oper, force_legacy);if (!speed) { - speed =SPEED_UNKNOWN ; +if (data_rate_oper) + speed =100 * data_rate_oper; +else + speed =SPEED_UNKNOWN ; goto out; }
@@ -874,6 +878,7 @@ int mlx5e_ethtool_get_link_ksettings(struct mlx5e_priv *priv, {struct mlx5_core_dev *mdev = priv->mdev;u32 out[MLX5_ST_SZ_DW (ptys_reg)] = {0 }; +u16 data_rate_oper;u32 rx_pause =0 ;u32 tx_pause =0 ;u32 eth_proto_cap;
@@ -917,6 +922,7 @@ int mlx5e_ethtool_get_link_ksettings(struct mlx5e_priv *priv, an_disable_admin =MLX5_GET (ptys_reg, out, an_disable_admin); an_status =MLX5_GET (ptys_reg, out, an_status); connector_type =MLX5_GET (ptys_reg, out, connector_type); + data_rate_oper =MLX5_GET (ptys_reg, out, data_rate_oper);mlx5_query_port_pause (mdev, &rx_pause, &tx_pause);
@@ -927,7 +933,7 @@ int mlx5e_ethtool_get_link_ksettings(struct mlx5e_priv *priv,get_advertising (eth_proto_admin, tx_pause, rx_pause, link_ksettings, admin_ext);get_speed_duplex (priv->netdev, eth_proto_oper, !admin_ext, - link_ksettings); + data_rate_oper, link_ksettings); eth_proto_oper = eth_proto_oper ? eth_proto_oper : eth_proto_cap;
Signature · 1 line
2.24.1
PATCH 2/11 net/mlx5: Tidy up and fix reverse christmas ordring
In reply to Saeed MahameedFrom: Mark Bloch <[email protected]>
Use reverse chirstmas tree inside mlx5e_ethtool_get_link_ksettings.
--- .../net/ethernet/mellanox/mlx5/core/en_ethtool.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +7 -7
@@ -877,18 +877,18 @@ int mlx5e_ethtool_get_link_ksettings(struct mlx5e_priv *priv, struct ethtool_link_ksettings *link_ksettings) {struct mlx5_core_dev *mdev = priv->mdev; -u32 out[MLX5_ST_SZ_DW (ptys_reg)] = {0 }; +u32 out[MLX5_ST_SZ_DW (ptys_reg)] = {}; +u32 eth_proto_admin; +u8 an_disable_admin;u16 data_rate_oper; +u32 eth_proto_oper; +u32 eth_proto_cap; +u8 connector_type;u32 rx_pause =0 ;u32 tx_pause =0 ; -u32 eth_proto_cap; -u32 eth_proto_admin;u32 eth_proto_lp; -u32 eth_proto_oper; -u8 an_disable_admin; -u8 an_status; -u8 connector_type;bool admin_ext; +u8 an_status;bool ext;int err;
Signature · 1 line
2.24.1
PATCH 3/11 net/mlx5: E-Switch, Use vport metadata matching only when mandatory
In reply to Saeed MahameedFrom: Majd Dibbiny <[email protected]>
Multi-port RoCE mode requires tagging traffic that passes through the vport.
This matching can cause performance degradation, therefore disable it and use the legacy matching on vhca_id and source_port when possible.
--- .../ethernet/mellanox/mlx5/core/eswitch_offloads.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +13 -1
@@ -2021,6 +2021,18 @@ esw_check_vport_match_metadata_supported(const struct mlx5_eswitch *esw)return true; } +static bool +esw_check_vport_match_metadata_mandatory (const struct mlx5_eswitch *esw) +{ +return mlx5_core_mp_enabled (esw->dev); +} + +static bool esw_use_vport_metadata (const struct mlx5_eswitch *esw) +{ +return esw_check_vport_match_metadata_mandatory (esw) && +esw_check_vport_match_metadata_supported (esw); +} +int esw_vport_create_offloads_acl_tables (struct mlx5_eswitch *esw,struct mlx5_vport *vport)
@@ -2059,7 +2071,7 @@ static int esw_create_uplink_offloads_acl_tables(struct mlx5_eswitch *esw)struct mlx5_vport *vport;int err; -if (esw_check_vport_match_metadata_supported (esw)) +if (esw_use_vport_metadata (esw)) esw->flags |=MLX5_ESWITCH_VPORT_MATCH_METADATA ; vport =mlx5_eswitch_get_vport (esw,MLX5_VPORT_UPLINK );
Signature · 1 line
2.24.1
PATCH 4/11 net/mlx5: Verify goto chain offload support
In reply to Saeed MahameedFrom: Eli Cohen <[email protected]>
According to PRM, forward to flow table along with either packet reformat or decap is supported only if reformat_and_fwd_to_table capability is set for the flow table.
Add dependency on the capability and pack all the conditions for "goto chain" in a single function.
Fix language in error message in case of not supporting forward to a lower numbered flow table.
--- .../net/ethernet/mellanox/mlx5/core/en_tc.c | 65 +++++++++++++------ 1 file changed, 45 insertions(+), 20 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +45 -20
@@ -3313,6 +3313,45 @@ static bool is_duplicated_output_device(struct net_device *dev,return false; } +static int mlx5_validate_goto_chain (struct mlx5_eswitch *esw, +struct mlx5e_tc_flow *flow, +const struct flow_action_entry *act, +u32 actions, +struct netlink_ext_ack *extack) +{ +u32 max_chain =mlx5_esw_chains_get_chain_range (esw); +struct mlx5_esw_flow_attr *attr = flow->esw_attr; +bool ft_flow =mlx5e_is_ft_flow (flow); +u32 dest_chain = act->chain_index; + +if (ft_flow) { +NL_SET_ERR_MSG_MOD (extack,"Goto action is not supported" ); +return -EOPNOTSUPP ; + } + +if (!mlx5_esw_chains_backwards_supported (esw) && + dest_chain <= attr->chain) { +NL_SET_ERR_MSG_MOD (extack, +"Goto lower numbered chain isn't supported" ); +return -EOPNOTSUPP ; + } +if (dest_chain > max_chain) { +NL_SET_ERR_MSG_MOD (extack, +"Requested destination chain is out of supported range" ); +return -EOPNOTSUPP ; + } + +if (actions & (MLX5_FLOW_CONTEXT_ACTION_PACKET_REFORMAT | +MLX5_FLOW_CONTEXT_ACTION_DECAP ) && + !MLX5_CAP_ESW_FLOWTABLE_FDB (esw->dev, reformat_and_fwd_to_table)) { +NL_SET_ERR_MSG_MOD (extack, +"Goto chain is not allowed if action has reformat or decap" ); +return -EOPNOTSUPP ; + } + +return 0 ; +} + static int parse_tc_fdb_actions(struct mlx5e_priv *priv, struct flow_action *flow_action, struct mlx5e_tc_flow *flow,
@@ -3534,29 +3573,15 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv,case FLOW_ACTION_TUNNEL_DECAP : action |=MLX5_FLOW_CONTEXT_ACTION_DECAP ;break ; -case FLOW_ACTION_GOTO : { -u32 dest_chain = act->chain_index; -u32 max_chain =mlx5_esw_chains_get_chain_range (esw); +case FLOW_ACTION_GOTO : + err =mlx5_validate_goto_chain (esw, flow, act, action, + extack); +if (err) +return err; -if (ft_flow) { -NL_SET_ERR_MSG_MOD (extack,"Goto action is not supported" ); -return -EOPNOTSUPP ; - } -if (!mlx5_esw_chains_backwards_supported (esw) && - dest_chain <= attr->chain) { -NL_SET_ERR_MSG_MOD (extack, -"Goto earlier chain isn't supported" ); -return -EOPNOTSUPP ; - } -if (dest_chain > max_chain) { -NL_SET_ERR_MSG_MOD (extack, -"Requested destination chain is out of supported range" ); -return -EOPNOTSUPP ; - } action |=MLX5_FLOW_CONTEXT_ACTION_COUNT ; - attr->dest_chain = dest_chain; + attr->dest_chain = act->chain_index;break ; - }default :NL_SET_ERR_MSG_MOD (extack,"The offload action is not supported" );return -EOPNOTSUPP ;
Signature · 1 line
2.24.1
PATCH 5/11 net/mlx5e: Fix an IS_ERR() vs NULL check
In reply to Saeed MahameedFrom: Dan Carpenter <[email protected]>
The esw_vport_tbl_get() function returns error pointers on error.
--- drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +1 -1
@@ -198,7 +198,7 @@ int mlx5_esw_vport_tbl_get(struct mlx5_eswitch *esw) mlx5_esw_for_all_vports(esw, i, vport) { attr.in_rep->vport = vport->vport; fdb =esw_vport_tbl_get (esw, &attr); -if (!fdb) +if (IS_ERR (fdb)) goto out; }return 0 ;
Signature · 1 line
2.24.1
PATCH 6/11 net/mlx5: Allocate smaller size tables for ft offload
In reply to Saeed MahameedFrom: Paul Blakey <[email protected]>
Instead of giving ft tables one of the largest tables available - 4M, give it a more reasonable size - 64k. Especially since it will always be created as a miss hook in the following patch.
--- .../ethernet/mellanox/mlx5/core/eswitch_offloads_chains.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads_chains.c +4 -1
@@ -34,6 +34,7 @@ static const unsigned int ESW_POOLS[] = { 4 * 1024 * 1024,1 *1024 *1024 ,64 *1024 , 128 }; +#define ESW_FT_TBL_SZ (64 * 1024) struct mlx5_esw_chains_priv { struct rhashtable chains_ht;
@@ -201,7 +202,9 @@ mlx5_esw_chains_create_fdb_table(struct mlx5_eswitch *esw, ft_attr.flags |= (MLX5_FLOW_TABLE_TUNNEL_EN_REFORMAT |MLX5_FLOW_TABLE_TUNNEL_EN_DECAP ); - sz =mlx5_esw_chains_get_avail_sz_from_pool (esw,POOL_NEXT_SIZE ); + sz = (chain ==mlx5_esw_chains_get_ft_chain (esw)) ? +mlx5_esw_chains_get_avail_sz_from_pool (esw,ESW_FT_TBL_SZ ) : +mlx5_esw_chains_get_avail_sz_from_pool (esw,POOL_NEXT_SIZE );if (!sz)return ERR_PTR (-ENOSPC ); ft_attr.max_fte = sz;
Signature · 1 line
2.24.1
PATCH 7/11 net/mlx5: E-switch, make query inline mode a static function
In reply to Saeed MahameedFrom: Parav Pandit <[email protected]>
mlx5_eswitch_inline_mode_get() is used only in eswitch_offloads.c. Hence, make it static and adjacent to its caller function.
--- .../net/ethernet/mellanox/mlx5/core/eswitch.h | 1 - .../mellanox/mlx5/core/eswitch_offloads.c | 74 +++++++++---------- 2 files changed, 37 insertions(+), 38 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/eswitch.h +0 -1
@@ -425,7 +425,6 @@ int mlx5_devlink_eswitch_mode_get(struct devlink *devlink, u16 *mode);int mlx5_devlink_eswitch_inline_mode_set (struct devlink *devlink,u8 mode,struct netlink_ext_ack *extack);int mlx5_devlink_eswitch_inline_mode_get (struct devlink *devlink,u8 *mode); -int mlx5_eswitch_inline_mode_get (struct mlx5_eswitch *esw,u8 *mode);int mlx5_devlink_eswitch_encap_mode_set (struct devlink *devlink,enum devlink_eswitch_encap_mode encap,struct netlink_ext_ack *extack);
drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +37 -37
86 lines not on this page · raw message
Signature · 1 line
2.24.1
PATCH 8/11 net/mlx5e: Introduce root ft concept for representors netdevs
In reply to Saeed MahameedUplink representor traffic will be redirected to an empty root ft rather than directly to a direct tir or ttc table, this root ft will be empty and will be used as a link for auto-chaining with ttc table or ethtool tables in downstream patches.
On load, fs core will connect uplink rep root_ft with ttc table. In case ethtool steering will be used, fs core will auto connect root_ft with the ethtool bypass tables, which will be connected with the ttc table.
vport_rx_rule[uplink_rep]->root_ft->ethtool->ttc.
For non-uplink representors, for simplicity root_ft will always point at ttc table, hence the replace vport_rx rule logic is removed.
vport_rx_rule[non_uplink_rep]->root_ft(ttc).
For now ethtool steering support can only be available on uplink rep.
--- .../net/ethernet/mellanox/mlx5/core/en_rep.c | 116 ++++++++++-------- .../net/ethernet/mellanox/mlx5/core/en_rep.h | 1 + .../net/ethernet/mellanox/mlx5/core/fs_core.c | 4 +- 3 files changed, 68 insertions(+), 53 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +65 -51
@@ -253,25 +253,6 @@ static int mlx5e_rep_set_ringparam(struct net_device *dev,return mlx5e_ethtool_set_ringparam (priv, param); } -static int mlx5e_replace_rep_vport_rx_rule (struct mlx5e_priv *priv, -struct mlx5_flow_destination *dest) -{ -struct mlx5_eswitch *esw = priv->mdev->priv.eswitch; -struct mlx5e_rep_priv *rpriv = priv->ppriv; -struct mlx5_eswitch_rep *rep = rpriv->rep; -struct mlx5_flow_handle *flow_rule; - - flow_rule =mlx5_eswitch_create_vport_rx_rule (esw, - rep->vport, - dest); -if (IS_ERR (flow_rule)) -return PTR_ERR (flow_rule); - -mlx5_del_flow_rules (rpriv->vport_rx_rule); - rpriv->vport_rx_rule = flow_rule; -return 0 ; -} -static void mlx5e_rep_get_channels (struct net_device *dev,struct ethtool_channels *ch) {
@@ -284,33 +265,8 @@ static int mlx5e_rep_set_channels(struct net_device *dev, struct ethtool_channels *ch) {struct mlx5e_priv *priv =netdev_priv (dev); -u16 curr_channels_amount = priv->channels.params.num_channels; -u32 new_channels_amount = ch->combined_count; -struct mlx5_flow_destination new_dest; -int err =0 ; - err =mlx5e_ethtool_set_channels (priv, ch); -if (err) -return err; - -if (curr_channels_amount ==1 && new_channels_amount >1 ) { - new_dest.type =MLX5_FLOW_DESTINATION_TYPE_FLOW_TABLE ; - new_dest.ft = priv->fs.ttc.ft.t; - }else if (new_channels_amount ==1 && curr_channels_amount >1 ) { - new_dest.type =MLX5_FLOW_DESTINATION_TYPE_TIR ; - new_dest.tir_num = priv->direct_tir[0 ].tirn; - }else { -return 0 ; - } - - err =mlx5e_replace_rep_vport_rx_rule (priv, &new_dest); -if (err) { -netdev_warn (priv->netdev,"Failed to update vport rx rule, when going from (%d) channels to (%d) channels\n" , - curr_channels_amount, new_channels_amount); -return err; - } - -return 0 ; +return mlx5e_ethtool_set_channels (priv, ch); } static int mlx5e_rep_get_coalesce(struct net_device *netdev,
@@ -1596,6 +1552,8 @@ static void mlx5e_cleanup_rep(struct mlx5e_priv *priv)static int mlx5e_create_rep_ttc_table (struct mlx5e_priv *priv) { +struct mlx5e_rep_priv *rpriv = priv->ppriv; +struct mlx5_eswitch_rep *rep = rpriv->rep;struct ttc_params ttc_params = {};int tt, err;
@@ -1605,6 +1563,11 @@ static int mlx5e_create_rep_ttc_table(struct mlx5e_priv *priv)/* The inner_ttc in the ttc params is intentionally not set */ ttc_params.any_tt_tirn = priv->direct_tir[0 ].tirn;mlx5e_set_ttc_ft_params (&ttc_params); + +if (rep->vport !=MLX5_VPORT_UPLINK ) +/* To give uplik rep TTC a lower level for chaining from root ft */ + ttc_params.ft_attr.level =MLX5E_TTC_FT_LEVEL +1 ; +for (tt =0 ; tt <MLX5E_NUM_INDIR_TIRS ; tt++) ttc_params.indir_tirn[tt] = priv->indir_tir[tt].tirn;
@@ -1616,6 +1579,51 @@ static int mlx5e_create_rep_ttc_table(struct mlx5e_priv *priv)return 0 ; } +static int mlx5e_create_rep_root_ft (struct mlx5e_priv *priv) +{ +struct mlx5e_rep_priv *rpriv = priv->ppriv; +struct mlx5_eswitch_rep *rep = rpriv->rep; +struct mlx5_flow_table_attr ft_attr = {}; +struct mlx5_flow_namespace *ns; +int err =0 ; + +if (rep->vport !=MLX5_VPORT_UPLINK ) { +/* non uplik reps will skip any bypass tables and go directly to +* their own ttc +*/ + rpriv->root_ft = priv->fs.ttc.ft.t; +return 0 ; + } + +/* uplink root ft will be used to auto chain, to ethtool or ttc tables */ + ns =mlx5_get_flow_namespace (priv->mdev,MLX5_FLOW_NAMESPACE_OFFLOADS ); +if (!ns) { +netdev_err (priv->netdev,"Failed to get reps offloads namespace\n" ); +return -EOPNOTSUPP ; + } + + ft_attr.max_fte =0 ;/* Empty table, miss rule will always point to next table */ + ft_attr.level =1 ; + + rpriv->root_ft =mlx5_create_flow_table (ns, &ft_attr); +if (IS_ERR (rpriv->root_ft)) { + err =PTR_ERR (rpriv->root_ft); + rpriv->root_ft =NULL ; + } + +return err; +} + +static void mlx5e_destroy_rep_root_ft (struct mlx5e_priv *priv) +{ +struct mlx5e_rep_priv *rpriv = priv->ppriv; +struct mlx5_eswitch_rep *rep = rpriv->rep; + +if (rep->vport !=MLX5_VPORT_UPLINK ) +return ; +mlx5_destroy_flow_table (rpriv->root_ft); +} +static int mlx5e_create_rep_vport_rx_rule (struct mlx5e_priv *priv) {struct mlx5_eswitch *esw = priv->mdev->priv.eswitch;
@@ -1624,11 +1632,10 @@ static int mlx5e_create_rep_vport_rx_rule(struct mlx5e_priv *priv)struct mlx5_flow_handle *flow_rule;struct mlx5_flow_destination dest; - dest.type =MLX5_FLOW_DESTINATION_TYPE_TIR ; - dest.tir_num = priv->direct_tir[0 ].tirn; - flow_rule =mlx5_eswitch_create_vport_rx_rule (esw, - rep->vport, - &dest); + dest.type =MLX5_FLOW_DESTINATION_TYPE_FLOW_TABLE ; + dest.ft = rpriv->root_ft; + + flow_rule =mlx5_eswitch_create_vport_rx_rule (esw, rep->vport, &dest);if (IS_ERR (flow_rule))return PTR_ERR (flow_rule); rpriv->vport_rx_rule = flow_rule;
@@ -1668,12 +1675,18 @@ static int mlx5e_init_rep_rx(struct mlx5e_priv *priv)if (err) goto err_destroy_direct_tirs; - err =mlx5e_create_rep_vport_rx_rule (priv); + err =mlx5e_create_rep_root_ft (priv);if (err) goto err_destroy_ttc_table; + err =mlx5e_create_rep_vport_rx_rule (priv); +if (err) + goto err_destroy_root_ft; +return 0 ; +err_destroy_root_ft: +mlx5e_destroy_rep_root_ft (priv); err_destroy_ttc_table:mlx5e_destroy_ttc_table (priv, &priv->fs.ttc); err_destroy_direct_tirs:
@@ -1694,6 +1707,7 @@ static void mlx5e_cleanup_rep_rx(struct mlx5e_priv *priv)struct mlx5e_rep_priv *rpriv = priv->ppriv;mlx5_del_flow_rules (rpriv->vport_rx_rule); +mlx5e_destroy_rep_root_ft (priv);mlx5e_destroy_ttc_table (priv, &priv->fs.ttc);mlx5e_destroy_direct_tirs (priv, priv->direct_tir);mlx5e_destroy_indirect_tirs (priv, false);
drivers/net/ethernet/mellanox/mlx5/core/en_rep.h +1 -0
@@ -87,6 +87,7 @@ struct mlx5e_rep_priv {struct mlx5_eswitch_rep *rep;struct mlx5e_neigh_update_table neigh_update;struct net_device *netdev; +struct mlx5_flow_table *root_ft;struct mlx5_flow_handle *vport_rx_rule;struct list_head vport_sqs_list;struct mlx5_rep_uplink_priv uplink_priv;/* valid for uplink rep */
drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +2 -2
@@ -110,7 +110,7 @@#define ANCHOR_NUM_PRIOS 1#define ANCHOR_MIN_LEVEL (BY_PASS_MIN_LEVEL + 1) -#define OFFLOADS_MAX_FT 1 +#define OFFLOADS_MAX_FT 2#define OFFLOADS_NUM_PRIOS 1#define OFFLOADS_MIN_LEVEL (ANCHOR_MIN_LEVEL + 1)
@@ -145,7 +145,7 @@ static struct init_tree_node {ADD_NS (MLX5_FLOW_TABLE_MISS_ACTION_DEF ,ADD_MULTIPLE_PRIO (LAG_NUM_PRIOS , LAG_PRIO_NUM_LEVELS))), -ADD_PRIO (0 ,OFFLOADS_MIN_LEVEL ,0 , {}, +ADD_PRIO (0 ,OFFLOADS_MIN_LEVEL ,0 ,FS_CHAINING_CAPS ,ADD_NS (MLX5_FLOW_TABLE_MISS_ACTION_DEF ,ADD_MULTIPLE_PRIO (OFFLOADS_NUM_PRIOS , OFFLOADS_MAX_FT))),
Signature · 1 line
2.24.1
PATCH 9/11 net/mlx5e: Show/set Rx flow indir table and RSS hash key on ul rep
In reply to Saeed MahameedFrom: Vlad Buslov <[email protected]>
Reuse infrastructure that already exists for pf in legacy mode to show/set Rx flow hash indirection table and RSS hash key for uplink representors.
--- drivers/net/ethernet/mellanox/mlx5/core/en.h | 3 +++ drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 8 ++++---- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 2 ++ 3 files changed, 9 insertions(+), 4 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en.h +3 -0
@@ -1169,6 +1169,9 @@ int mlx5e_ethtool_get_link_ksettings(struct mlx5e_priv *priv, struct ethtool_link_ksettings *link_ksettings);int mlx5e_ethtool_set_link_ksettings (struct mlx5e_priv *priv,const struct ethtool_link_ksettings *link_ksettings); +int mlx5e_get_rxfh (struct net_device *netdev,u32 *indir,u8 *key,u8 *hfunc); +int mlx5e_set_rxfh (struct net_device *dev,const u32 *indir,const u8 *key, +const u8 hfunc);u32 mlx5e_ethtool_get_rxfh_key_size (struct mlx5e_priv *priv);u32 mlx5e_ethtool_get_rxfh_indir_size (struct mlx5e_priv *priv); int mlx5e_ethtool_get_ts_info(struct mlx5e_priv *priv,
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +4 -4
@@ -1132,8 +1132,8 @@ static u32 mlx5e_get_rxfh_indir_size(struct net_device *netdev)return mlx5e_ethtool_get_rxfh_indir_size (priv); } -static int mlx5e_get_rxfh (struct net_device *netdev,u32 *indir,u8 *key, -u8 *hfunc) +int mlx5e_get_rxfh (struct net_device *netdev,u32 *indir,u8 *key, +u8 *hfunc) {struct mlx5e_priv *priv =netdev_priv (netdev);struct mlx5e_rss_params *rss = &priv->rss_params;
@@ -1152,8 +1152,8 @@ static int mlx5e_get_rxfh(struct net_device *netdev, u32 *indir, u8 *key,return 0 ; } -static int mlx5e_set_rxfh (struct net_device *dev,const u32 *indir, -const u8 *key,const u8 hfunc) +int mlx5e_set_rxfh (struct net_device *dev,const u32 *indir, +const u8 *key,const u8 hfunc) {struct mlx5e_priv *priv =netdev_priv (dev);struct mlx5e_rss_params *rss = &priv->rss_params;
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +2 -0
@@ -369,6 +369,8 @@ static const struct ethtool_ops mlx5e_uplink_rep_ethtool_ops = { .set_link_ksettings = mlx5e_uplink_rep_set_link_ksettings, .get_rxfh_key_size = mlx5e_rep_get_rxfh_key_size, .get_rxfh_indir_size = mlx5e_rep_get_rxfh_indir_size, + .get_rxfh = mlx5e_get_rxfh, + .set_rxfh = mlx5e_set_rxfh, .get_pauseparam = mlx5e_uplink_rep_get_pauseparam, .set_pauseparam = mlx5e_uplink_rep_set_pauseparam, };
Signature · 1 line
2.24.1
PATCH 10/11 net/mlx5e: Init ethtool steering for representors
In reply to Saeed MahameedFrom: Vlad Buslov <[email protected]>
During transition to uplink representors the code responsible for initializing ethtool steering functionality wasn't added to representor init rx routine. This causes NULL pointer dereference during configuration of network flow classification rule with ethtool (only possible to reproduce with next commit in this series which registers necessary ethtool callbacks).
--- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +2 -0
@@ -1685,6 +1685,8 @@ static int mlx5e_init_rep_rx(struct mlx5e_priv *priv)if (err) goto err_destroy_root_ft; +mlx5e_ethtool_init_steering (priv); +return 0 ; err_destroy_root_ft:
Signature · 1 line
2.24.1
PATCH 11/11 net/mlx5e: Show/set Rx network flow classification rules on ul rep
In reply to Saeed MahameedFrom: Vlad Buslov <[email protected]>
Reuse infrastructure that already exists for pf in legacy mode to show/set Rx network flow classification rules for uplink representors.
--- drivers/net/ethernet/mellanox/mlx5/core/en.h | 3 +++ drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 5 +++-- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 2 ++ 3 files changed, 8 insertions(+), 2 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en.h +3 -0
@@ -1172,6 +1172,9 @@ int mlx5e_ethtool_set_link_ksettings(struct mlx5e_priv *priv,int mlx5e_get_rxfh (struct net_device *netdev,u32 *indir,u8 *key,u8 *hfunc);int mlx5e_set_rxfh (struct net_device *dev,const u32 *indir,const u8 *key,const u8 hfunc); +int mlx5e_get_rxnfc (struct net_device *dev,struct ethtool_rxnfc *info, +u32 *rule_locs); +int mlx5e_set_rxnfc (struct net_device *dev,struct ethtool_rxnfc *cmd);u32 mlx5e_ethtool_get_rxfh_key_size (struct mlx5e_priv *priv);u32 mlx5e_ethtool_get_rxfh_indir_size (struct mlx5e_priv *priv); int mlx5e_ethtool_get_ts_info(struct mlx5e_priv *priv,
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +3 -2
@@ -1948,7 +1948,8 @@ static u32 mlx5e_get_priv_flags(struct net_device *netdev)return priv->channels.params.pflags; } -static int mlx5e_get_rxnfc (struct net_device *dev,struct ethtool_rxnfc *info,u32 *rule_locs) +int mlx5e_get_rxnfc (struct net_device *dev,struct ethtool_rxnfc *info, +u32 *rule_locs) {struct mlx5e_priv *priv =netdev_priv (dev);
@@ -1965,7 +1966,7 @@ static int mlx5e_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *info, ureturn mlx5e_ethtool_get_rxnfc (dev, info, rule_locs); } -static int mlx5e_set_rxnfc (struct net_device *dev,struct ethtool_rxnfc *cmd) +int mlx5e_set_rxnfc (struct net_device *dev,struct ethtool_rxnfc *cmd) {return mlx5e_ethtool_set_rxnfc (dev, cmd); }
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +2 -0
@@ -371,6 +371,8 @@ static const struct ethtool_ops mlx5e_uplink_rep_ethtool_ops = { .get_rxfh_indir_size = mlx5e_rep_get_rxfh_indir_size, .get_rxfh = mlx5e_get_rxfh, .set_rxfh = mlx5e_set_rxfh, + .get_rxnfc = mlx5e_get_rxnfc, + .set_rxnfc = mlx5e_set_rxnfc, .get_pauseparam = mlx5e_uplink_rep_get_pauseparam, .set_pauseparam = mlx5e_uplink_rep_set_pauseparam, };
Signature · 1 line
2.24.1
David Miller
maintainerFrom: Saeed Mahameed <[email protected]>
Date: Mon, 9 Mar 2020 18:42:35 -0700
Quoted 7 lines
This series adds misc updates and cleanups to mlx5 drivers. For more information please see tag log below.
Please pull and let me know if there is any problem.
Please note that the series starts with a merge of mlx5-next branch, to resolve and avoid dependency with rdma tree.
Looks all pretty straightforward to me, pulled, thanks Saeed.