Skip to contentSkip to conversation

armv8: ls1028a: add dhcp boot target device

PATCH New andy.tang at nxp.com 2 participants 3 messages Mar 10, 2020 – Mar 30, 2020

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 armv8: ls1028a: add dhcp boot target device

From: Yuantian Tang <[email protected]>

Add DHCP boot target device to enable command bootcmd_dhcp.

---
 include/configs/ls1028a_common.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
include/configs/ls1028a_common.h +2 -1
index 98320e22e9..94ba08acb4 100644
@@ -70,7 +70,8 @@
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
 	func(MMC, mmc, 1) \
-	func(USB, usb, 0)
+	func(USB, usb, 0) \
+	func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
 
 /* Initial environment variables */
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/1 armv8: ls1028a: add dhcp boot target device

Quoted 34 lines

-----Original Message-----
From: U-Boot <[email protected]> On Behalf Of andy.tang at nxp.com
Sent: Tuesday, March 10, 2020 9:01 AM
To: Priyanka Jain <[email protected]>
Cc: Sudhanshu Gupta <[email protected]>; u-boot at lists.denx.de; Andy Tang <[email protected]>
Subject: [PATCH] armv8: ls1028a: add dhcp boot target device

From: Yuantian Tang <[email protected]>

Add DHCP boot target device to enable command bootcmd_dhcp.

---
include/configs/ls1028a_common.h | 3 ++-

1 file changed, 2 insertions(+), 1 deletion(-)
include/configs/ls1028a_common.h +2 -2
index 98320e22e9..94ba08acb4 100644
@@ -70,7 +70,8 @@
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
 	func(MMC, mmc, 1) \
-	func(USB, usb, 0)
+	func(USB, usb, 0) \
+	func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
 
 /* Initial environment variables */
--
Quoted 1 line

2.17.1

#2 lore raw

PATCH 1/1 armv8: ls1028a: add dhcp boot target device

In reply to andy.tang at nxp.com
Quoted 9 lines

-----Original Message-----
From: U-Boot <[email protected]> On Behalf Of andy.tang at nxp.com
Sent: Tuesday, March 10, 2020 9:01 AM
To: Priyanka Jain <[email protected]>
Cc: Sudhanshu Gupta <[email protected]>; u-boot at lists.denx.de; Andy Tang <[email protected]>
Subject: [PATCH] armv8: ls1028a: add dhcp boot target device

Quoted 6 lines

From: Yuantian Tang <[email protected]>

Add DHCP boot target device to enable command bootcmd_dhcp.

---

Applied to u-boot-fsl-qoriq. Waiting upstream

Thanks
Priyanka