imx6, aristainetos2c: add da9063 pmic setup
PATCH 1/1 imx6, aristainetos2c: add da9063 pmic setup
On the aristainetos2c boards the PMIC needs to be initialized, because the Ethernet PHY uses a different regulator that is not setup per hardware default. This does not influence the other versions as this regulator isn't used there at all.
Signed-off-by Heiko Schocher <[email protected]>
---
board/aristainetos/aristainetos.c | 56 +++++++++++++++++++++++++++++++ configs/aristainetos2c_defconfig | 3 ++ 2 files changed, 59 insertions(+)
board/aristainetos/aristainetos.c +56 -0
@@ -30,6 +30,9 @@#include <miiphy.h> #include <lcd.h> #include <led.h> +#include <power/pmic.h> +#include <power/regulator.h> +#include <power/da9063_pmic.h> #include <splash.h> #include <video_fb.h>
@@ -438,6 +441,56 @@ static void aristainetos_bootmode_settings(void) } } +#if defined(CONFIG_DM_PMIC_DA9063 ) +/* +* On the aristainetos2c boards the PMIC needs to be initialized, +* because the Ethernet PHY uses a different regulator that is not +* setup per hardware default. This does not influence the other versions +* as this regulator isn't used there at all. +* +* Unfortunately we have not yet a interface to setup all +* values we need. +*/ +static int setup_pmic_voltages (void ) +{ +struct udevice *dev; +int off; +int ret; + + off =fdt_path_offset (gd->fdt_blob,"pmic0" ); +if (off <0 ) { +printf ("%s: No pmic path offset\n" , __func__); +return off; + } + + ret =uclass_get_device_by_of_offset (UCLASS_PMIC , off, &dev); +if (ret) { +printf ("%s: Could not find PMIC\n" , __func__); +return ret; + } + +pmic_reg_write (dev,DA9063_REG_PAGE_CON ,0x01 ); +pmic_reg_write (dev,DA9063_REG_BPRO_CFG ,0xc1 ); + ret =pmic_reg_read (dev,DA9063_REG_BUCK_ILIM_B ); +if (ret <0 ) { +printf ("%s: error %d get register\n" , __func__, ret); +return ret; + } + ret &=0xf0 ; + ret |=0x09 ; +pmic_reg_write (dev,DA9063_REG_BUCK_ILIM_B , ret); +pmic_reg_write (dev,DA9063_REG_VBPRO_A ,0x43 ); +pmic_reg_write (dev,DA9063_REG_VBPRO_B ,0xc3 ); + +return 0 ; +} +#else +static int setup_pmic_voltages (void ) +{ +return 0 ; +} +#endif +int board_late_init (void ) {int x, y;
@@ -457,6 +510,9 @@ int board_late_init(void)else env_set ("board_type" ,ARI_BT_7 ); +if (setup_pmic_voltages ()) +printf ("Error setup PMIC\n" ); +return 0 ; }
configs/aristainetos2c_defconfig +3 -0
@@ -87,7 +87,10 @@ CONFIG_PHY=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y CONFIG_DM_PMIC=y +# CONFIG_SPL_PMIC_CHILDREN is not set +CONFIG_DM_PMIC_DA9063=y CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_DA9063=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_PWM=y CONFIG_PWM_IMX=y
Signature · 1 line
2.24.1
PATCH 1/1 imx6, aristainetos2c: add da9063 pmic setup
Quoted 5 lines
On the aristainetos2c boards the PMIC needs to be initialized, because the Ethernet PHY uses a different regulator that is not setup per hardware default. This does not influence the other versions as this regulator isn't used there at all.
Signed-off-by Heiko Schocher <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================