Skip to contentSkip to conversation

staging: comedi: dt2801: remove old unused code

PATCH Superseded Deepak R Varma 2 participants 2 messages Mar 10, 2020 Staging

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 staging: comedi: dt2801: remove old unused code

patch V2 revision is for updating the patch description only. There are two #if 0 blocks that have no recent history of any change. We can remove those code blocks for improved readability of the code.

---
 drivers/staging/comedi/drivers/dt2801.c | 22 ------------------
 drivers/staging/comedi/drivers/dt282x.c | 30 +------------------------
 2 files changed, 1 insertion(+), 51 deletions(-)
drivers/staging/comedi/drivers/dt2801.c +0 -22
index a29880981d81..aad02faa2f83 100644
@@ -87,17 +87,6 @@
 #define DT2801_STATUS		1
 #define DT2801_CMD		1
 
-#if 0
-/* ignore 'defined but not used' warning */
-static const struct comedi_lrange range_dt2801_ai_pgh_bipolar = {
-	4, {
-		BIP_RANGE(10),
-		BIP_RANGE(5),
-		BIP_RANGE(2.5),
-		BIP_RANGE(1.25)
-	}
-};
-#endif
 static const struct comedi_lrange range_dt2801_ai_pgl_bipolar = {
 	4, {
 		BIP_RANGE(10),
@@ -107,17 +96,6 @@ static const struct comedi_lrange range_dt2801_ai_pgl_bipolar = {
 	}
 };
 
-#if 0
-/* ignore 'defined but not used' warning */
-static const struct comedi_lrange range_dt2801_ai_pgh_unipolar = {
-	4, {
-		UNI_RANGE(10),
-		UNI_RANGE(5),
-		UNI_RANGE(2.5),
-		UNI_RANGE(1.25)
-	}
-};
-#endif
 static const struct comedi_lrange range_dt2801_ai_pgl_unipolar = {
 	4, {
 		UNI_RANGE(10),
drivers/staging/comedi/drivers/dt282x.c +1 -29
index e15e33ed94ae..89dc84d3c803 100644
@@ -484,14 +484,7 @@ static void dt282x_ai_dma_interrupt(struct comedi_device *dev,
 		s->async->events |= COMEDI_CB_EOA;
 		return;
 	}
-#if 0
-	/* clear the dual dma flag, making this the last dma segment */
-	/* XXX probably wrong */
-	if (!devpriv->ntrig) {
-		devpriv->supcsr &= ~DT2821_SUPCSR_DDMA;
-		outw(devpriv->supcsr, dev->iobase + DT2821_SUPCSR_REG);
-	}
-#endif
+
 	/* restart the channel */
 	dt282x_prep_ai_dma(dev, dma->cur_dma, 0);
 
@@ -534,28 +527,7 @@ static irqreturn_t dt282x_interrupt(int irq, void *d)
 		s_ao->async->events |= COMEDI_CB_ERROR;
 		handled = 1;
 	}
-#if 0
-	if (adcsr & DT2821_ADCSR_ADDONE) {
-		unsigned short data;
-
-		data = inw(dev->iobase + DT2821_ADDAT_REG);
-		data &= s->maxdata;
-		if (devpriv->ad_2scomp)
-			data = comedi_offset_munge(s, data);
 
-		comedi_buf_write_samples(s, &data, 1);
-
-		devpriv->nread--;
-		if (!devpriv->nread) {
-			s->async->events |= COMEDI_CB_EOA;
-		} else {
-			if (supcsr & DT2821_SUPCSR_SCDN)
-				outw(devpriv->supcsr | DT2821_SUPCSR_STRIG,
-				     dev->iobase + DT2821_SUPCSR_REG);
-		}
-		handled = 1;
-	}
-#endif
 	comedi_handle_events(dev, s);
 	if (s_ao)
 		comedi_handle_events(dev, s_ao);
Signature · 1 line
2.17.1
#1 lore raw
Quoted 1 line · Deepak R Varma

patch V2 revision is for updating the patch description only.

This is not the correct way to present the v2 of a patch.

The discussion of the difference as compared to the previous version should go below the ---. The text above the --- will go in the git history. The git history doesn't contain the v1, so the discussion about how the current patch is different from the v1 is not relevant at that point.

Please search for "Versioning one patch revision" in the tutorial:
https://kernelnewbies.org/FirstKernelPatch

Quoted 2 lines

There are two #if 0 blocks that have no recent history of any change. We can remove those code blocks for improved readability of the code.

The log message should be written in the imperative.

Please look at some patches submitted by others to get a feel for how they should be presented. You can look at the patches on this mailing list and on lkml.org.

julia