pci: prevent putting nvidia GPUs into lower device states on certain intel bridges
Subsystems (4)
PATCH v7 1/1 pci: prevent putting nvidia GPUs into lower device states on certain intel bridges
Fixes the infamous 'runtime PM' bug many users are facing on Laptops with Nvidia Pascal GPUs by skipping said PCI power state changes on the GPU.
Depending on the used kernel there might be messages like those in demsg:
"nouveau 0000:01:00.0: Refused to change power state, currently in D3" "nouveau 0000:01:00.0: can't change power state from D3cold to D0 (config space inaccessible)"
followed by backtraces of kernel crashes or timeouts within nouveau.
It's still unkown why this issue exists, but this is a reliable workaround and solves a very annoying issue for user having to choose between a crashing kernel or higher power consumption of their Laptops.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205623
---
v2: convert to pci_dev quirk
put a proper technical explanation of the issue as a in-code comment
v3: disable it only for certain combinations of intel and nvidia hardware
v4: simplify quirk by setting flag on the GPU itself
v5: restructure quirk to make it easier to add new IDs
fix whitespace issues
fix potential NULL pointer access
update the quirk documentation
v6: move quirk into nouveau
v7: fix typos and commit message
drivers/gpu/drm/nouveau/nouveau_drm.c | 57 +++++++++++++++++++++++++++ drivers/pci/pci.c | 8 ++++ include/linux/pci.h | 1 + 3 files changed, 66 insertions(+)
drivers/gpu/drm/nouveau/nouveau_drm.c +57 -0
@@ -618,6 +618,60 @@ nouveau_drm_device_fini(struct drm_device *dev)kfree (drm); } +/* +* On some Intel PCIe bridge controllers doing a +* D0 -> D3hot -> D3cold -> D0 sequence causes Nvidia GPUs to not reappear. +* Skipping the intermediate D3hot step seems to make it work again. This is +* probably caused by not meeting the expectation the involved AML code has +* when the GPU is put into D3hot state before invoking it. +* +* This leads to various manifestations of this issue: +* - AML code execution to power on the GPU hits an infinite loop (as the +* code waits on device memory to change). +* - kernel crashes, as all PCI reads return -1, which most code isn't able +* to handle well enough. +* +* In all cases dmesg will contain at least one line like this: +* 'nouveau 0000:01:00.0: Refused to change power state, currently in D3' +* followed by a lot of nouveau timeouts. +* +* In the \_SB.PCI0.PEG0.PG00._OFF code deeper down writes bit 0x80 to the not +* documented PCI config space register 0x248 of the Intel PCIe bridge +* controller (0x1901) in order to change the state of the PCIe link between +* the PCIe port and the GPU. There are alternative code paths using other +* registers, which seem to work fine (executed pre Windows 8): +* - 0xbc bit 0x20 (publicly available documentation claims 'reserved') +* - 0xb0 bit 0x10 (link disable) +* Changing the conditions inside the firmware by poking into the relevant +* addresses does resolve the issue, but it seemed to be ACPI private memory +* and not any device accessible memory at all, so there is no portable way of +* changing the conditions. +* On a XPS 9560 that means bits [0,3] on \CPEX need to be cleared. +* +* The only systems where this behavior can be seen are hybrid graphics laptops +* with a secondary Nvidia Maxwell, Pascal or Turing GPU. It's unclear whether +* this issue only occurs in combination with listed Intel PCIe bridge +* controllers and the mentioned GPUs or other devices as well. +* +* documentation on the PCIe bridge controller can be found in the +* "7th Generation Intel® Processor Families for H Platforms Datasheet Volume 2" +* Section "12 PCI Express* Controller (x16) Registers" +*/ + +static void quirk_broken_nv_runpm (struct pci_dev *dev) +{ +struct pci_dev *bridge =pci_upstream_bridge (dev); + +if (!bridge || bridge->vendor !=PCI_VENDOR_ID_INTEL ) +return ; + +switch (bridge->device) { +case 0x1901 : + dev->parent_d3cold =1 ; +break ; + } +} +static int nouveau_drm_probe (struct pci_dev *pdev,const struct pci_device_id *pent) {
@@ -699,6 +753,7 @@ static int nouveau_drm_probe(struct pci_dev *pdev,if (ret) goto fail_drm_dev_init; +quirk_broken_nv_runpm (pdev);return 0 ; fail_drm_dev_init:
@@ -735,6 +790,8 @@ nouveau_drm_remove(struct pci_dev *pdev) {struct drm_device *dev =pci_get_drvdata (pdev); +/* revert our workaround */ + pdev->parent_d3cold = false;nouveau_drm_device_remove (dev);pci_disable_device (pdev); }
drivers/pci/pci.c +8 -0
@@ -861,6 +861,14 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) || (state == PCI_D2 && !dev->d2_support))return -EIO ; +/* +* Power management can be disabled for certain devices as they don't +* come back up later on runtime_resume. We rely on platform means to +* cut power consumption instead (e.g. ACPI). +*/ +if (state !=PCI_D0 && dev->parent_d3cold) +return 0 ; +pci_read_config_word (dev, dev->pm_cap +PCI_PM_CTRL , &pmcsr);if (pmcsr == (u16 ) ~0 ) { pci_err(dev, "can't change power state from %s to %s (config space inaccessible)\n",
include/linux/pci.h +1 -0
@@ -340,6 +340,7 @@ struct pci_dev { unsigned int no_d3cold:1; /* D3cold is forbidden */ unsigned int bridge_d3:1; /* Allow D3 for bridge */ unsigned int d3cold_allowed:1; /* D3cold is allowed by user */ + unsigned int parent_d3cold:1; /* Power manage the parent instead */ unsigned int mmio_always_on:1; /* Disallow turning off io/memdecoding during BAR sizing */ unsigned int wakeup_prepared:1;
Signature · 1 line
2.24.1
Quoted 5 lines · Karol Herbst
Fixes the infamous 'runtime PM' bug many users are facing on Laptops with Nvidia Pascal GPUs by skipping said PCI power state changes on the GPU.
Depending on the used kernel there might be messages like those in demsg:
Quoted 8 lines
"nouveau 0000:01:00.0: Refused to change power state, currently in D3" "nouveau 0000:01:00.0: can't change power state from D3cold to D0 (config space inaccessible)"
followed by backtraces of kernel crashes or timeouts within nouveau.It's still unkown why this issue exists, but this is a reliable workaround and solves a very annoying issue for user having to choose between a crashing kernel or higher power consumption of their Laptops.
Thanks for the bugzilla link. The bugzilla mentions lots of mailing list discussion. Can you include links to some of that?
IIUC this basically just turns off PCI power management for the GPU. Can you do that with something like the following? I don't know anything about DRM, so I don't know where you could save the pm_cap, but I'm sure the driver could keep it somewhere.
drivers/gpu/drm/nouveau/nouveau_drm.c +21 -0
@@ -618,6 +618,23 @@ nouveau_drm_device_fini(struct drm_device *dev)kfree (drm); } +static void quirk_broken_nv_runpm (struct drm_device *drm_dev) +{ +struct pci_dev *pdev = drm_dev->pdev; +struct pci_dev *bridge =pci_upstream_bridge (pdev); + +if (!bridge || bridge->vendor !=PCI_VENDOR_ID_INTEL ) +return ; + +switch (bridge->device) { +case 0x1901 : +STASH ->pm_cap = pdev->pm_cap; + pdev->pm_cap =0 ; +NV_INFO (drm_dev,"Disabling PCI power management to avoid bug\n" ); +break ; + } +} +static int nouveau_drm_probe (struct pci_dev *pdev,const struct pci_device_id *pent) {
@@ -699,6 +716,7 @@ static int nouveau_drm_probe(struct pci_dev *pdev,if (ret) goto fail_drm_dev_init; +quirk_broken_nv_runpm (drm_dev);return 0 ; fail_drm_dev_init:
@@ -735,6 +753,9 @@ nouveau_drm_remove(struct pci_dev *pdev) {struct drm_device *dev =pci_get_drvdata (pdev); +/* If we disabled PCI power management, restore it */ +if (STASH ->pm_cap) + pdev->pm_cap =STASH ->pm_cap;nouveau_drm_device_remove (dev);pci_disable_device (pdev); }
Quoted 16 lines · Bjorn Helgaas
Quoted 5 lines · Karol Herbst
Fixes the infamous 'runtime PM' bug many users are facing on Laptops with Nvidia Pascal GPUs by skipping said PCI power state changes on the GPU.
Depending on the used kernel there might be messages like those in demsg:
Quoted 8 lines
"nouveau 0000:01:00.0: Refused to change power state, currently in D3" "nouveau 0000:01:00.0: can't change power state from D3cold to D0 (config space inaccessible)"
followed by backtraces of kernel crashes or timeouts within nouveau.It's still unkown why this issue exists, but this is a reliable workaround and solves a very annoying issue for user having to choose between a crashing kernel or higher power consumption of their Laptops.
Quoted 8 lines
Thanks for the bugzilla link. The bugzilla mentions lots of mailing list discussion. Can you include links to some of that?
IIUC this basically just turns off PCI power management for the GPU. Can you do that with something like the following? I don't know anything about DRM, so I don't know where you could save the
pm_cap, but I'm sure the driver could keep it somewhere.
Sure this would work? From a quick look over the pci code, it looks like a of code would be skipped we really need, like the platform code to turn off the GPU via ACPI. But I could also remember incorrectly on how all of that worked again. I can of course try and see what the effect of this patch would be. And would the parent bus even go into D3hot if it knows one of its children is still at D0? Because that's what the result of that would be as well, no? And I know that if the bus stays in D0, that it has a negative impact on power consumption.
Anyway, I will try that out, I am just not seeing how that would help.
Quoted 48 lines
drivers/gpu/drm/nouveau/nouveau_drm.c +21
-0@@ -618,6 +618,23 @@ nouveau_drm_device_fini(struct drm_device *dev)kfree (drm); } +static void quirk_broken_nv_runpm (struct drm_device *drm_dev) +{ +struct pci_dev *pdev = drm_dev->pdev; +struct pci_dev *bridge =pci_upstream_bridge (pdev); + +if (!bridge || bridge->vendor !=PCI_VENDOR_ID_INTEL ) +return ; + +switch (bridge->device) { +case 0x1901 : +STASH ->pm_cap = pdev->pm_cap; + pdev->pm_cap =0 ; +NV_INFO (drm_dev,"Disabling PCI power management to avoid bug\n" ); +break ; + } +} +static int nouveau_drm_probe (struct pci_dev *pdev,const struct pci_device_id *pent) {@@ -699,6 +716,7 @@ static int nouveau_drm_probe(struct pci_dev *pdev,if (ret) goto fail_drm_dev_init; +quirk_broken_nv_runpm (drm_dev);return 0 ; fail_drm_dev_init:@@ -735,6 +753,9 @@ nouveau_drm_remove(struct pci_dev *pdev) {struct drm_device *dev =pci_get_drvdata (pdev); +/* If we disabled PCI power management, restore it */ +if (STASH ->pm_cap) + pdev->pm_cap =STASH ->pm_cap;nouveau_drm_device_remove (dev);pci_disable_device (pdev); }
Quoted 36 lines · Karol Herbst
Quoted 16 lines · Bjorn Helgaas
Quoted 5 lines · Karol Herbst
Fixes the infamous 'runtime PM' bug many users are facing on Laptops with Nvidia Pascal GPUs by skipping said PCI power state changes on the GPU.
Depending on the used kernel there might be messages like those in demsg:
Quoted 8 lines
"nouveau 0000:01:00.0: Refused to change power state, currently in D3" "nouveau 0000:01:00.0: can't change power state from D3cold to D0 (config space inaccessible)"
followed by backtraces of kernel crashes or timeouts within nouveau.It's still unkown why this issue exists, but this is a reliable workaround and solves a very annoying issue for user having to choose between a crashing kernel or higher power consumption of their Laptops.
Quoted 8 lines
Thanks for the bugzilla link. The bugzilla mentions lots of mailing list discussion. Can you include links to some of that?
IIUC this basically just turns off PCI power management for the GPU. Can you do that with something like the following? I don't know anything about DRM, so I don't know where you could save the
pm_cap, but I'm sure the driver could keep it somewhere.Sure this would work? From a quick look over the pci code, it looks like a of code would be skipped we really need, like the platform code to turn off the GPU via ACPI. But I could also remember incorrectly on how all of that worked again. I can of course try and see what the effect of this patch would be. And would the parent bus even go into D3hot if it knows one of its children is still at D0? Because that's what the result of that would be as well, no? And I know that if the bus stays in D0, that it has a negative impact on power consumption.
Quoted 2 lines
Anyway, I will try that out, I am just not seeing how that would help.
so it seems like that has worked unless I screwed up locally. Will do some proper testing and then I think we won't need to go through the pci tree anymore as no changes are required there with that.
Quoted 48 lines
Quoted 48 lines
drivers/gpu/drm/nouveau/nouveau_drm.c +21
-0@@ -618,6 +618,23 @@ nouveau_drm_device_fini(struct drm_device *dev)kfree (drm); } +static void quirk_broken_nv_runpm (struct drm_device *drm_dev) +{ +struct pci_dev *pdev = drm_dev->pdev; +struct pci_dev *bridge =pci_upstream_bridge (pdev); + +if (!bridge || bridge->vendor !=PCI_VENDOR_ID_INTEL ) +return ; + +switch (bridge->device) { +case 0x1901 : +STASH ->pm_cap = pdev->pm_cap; + pdev->pm_cap =0 ; +NV_INFO (drm_dev,"Disabling PCI power management to avoid bug\n" ); +break ; + } +} +static int nouveau_drm_probe (struct pci_dev *pdev,const struct pci_device_id *pent) {@@ -699,6 +716,7 @@ static int nouveau_drm_probe(struct pci_dev *pdev,if (ret) goto fail_drm_dev_init; +quirk_broken_nv_runpm (drm_dev);return 0 ; fail_drm_dev_init:@@ -735,6 +753,9 @@ nouveau_drm_remove(struct pci_dev *pdev) {struct drm_device *dev =pci_get_drvdata (pdev); +/* If we disabled PCI power management, restore it */ +if (STASH ->pm_cap) + pdev->pm_cap =STASH ->pm_cap;nouveau_drm_device_remove (dev);pci_disable_device (pdev); }
Quoted 37 lines · Karol Herbst
Quoted 36 lines · Karol Herbst
Quoted 16 lines · Bjorn Helgaas
Quoted 5 lines · Karol Herbst
Fixes the infamous 'runtime PM' bug many users are facing on Laptops with Nvidia Pascal GPUs by skipping said PCI power state changes on the GPU.
Depending on the used kernel there might be messages like those in demsg:
Quoted 8 lines
"nouveau 0000:01:00.0: Refused to change power state, currently in D3" "nouveau 0000:01:00.0: can't change power state from D3cold to D0 (config space inaccessible)"
followed by backtraces of kernel crashes or timeouts within nouveau.It's still unkown why this issue exists, but this is a reliable workaround and solves a very annoying issue for user having to choose between a crashing kernel or higher power consumption of their Laptops.
Quoted 8 lines
Thanks for the bugzilla link. The bugzilla mentions lots of mailing list discussion. Can you include links to some of that?
IIUC this basically just turns off PCI power management for the GPU. Can you do that with something like the following? I don't know anything about DRM, so I don't know where you could save the
pm_cap, but I'm sure the driver could keep it somewhere.Sure this would work? From a quick look over the pci code, it looks like a of code would be skipped we really need, like the platform code to turn off the GPU via ACPI. But I could also remember incorrectly on how all of that worked again. I can of course try and see what the effect of this patch would be. And would the parent bus even go into D3hot if it knows one of its children is still at D0? Because that's what the result of that would be as well, no? And I know that if the bus stays in D0, that it has a negative impact on power consumption.
Quoted 5 lines
Quoted 1 line
Anyway, I will try that out, I am just not seeing how that would help.
so it seems like that has worked unless I screwed up locally. Will do some proper testing and then I think we won't need to go through the pci tree anymore as no changes are required there with that.
Hehe, looks like our responses crossed in the mail :) I hope further testing is still positive; let me know if not.
Bjorn
Quoted 25 lines · Karol Herbst
Quoted 16 lines · Bjorn Helgaas
Quoted 5 lines · Karol Herbst
Fixes the infamous 'runtime PM' bug many users are facing on Laptops with Nvidia Pascal GPUs by skipping said PCI power state changes on the GPU.
Depending on the used kernel there might be messages like those in demsg:
Quoted 8 lines
"nouveau 0000:01:00.0: Refused to change power state, currently in D3" "nouveau 0000:01:00.0: can't change power state from D3cold to D0 (config space inaccessible)"
followed by backtraces of kernel crashes or timeouts within nouveau.It's still unkown why this issue exists, but this is a reliable workaround and solves a very annoying issue for user having to choose between a crashing kernel or higher power consumption of their Laptops.
Quoted 7 lines
Thanks for the bugzilla link. The bugzilla mentions lots of mailing list discussion. Can you include links to some of that?
IIUC this basically just turns off PCI power management for the GPU. Can you do that with something like the following? I don't know anything about DRM, so I don't know where you could save the
pm_cap, but I'm sure the driver could keep it somewhere.
Quoted 5 lines
Sure this would work? From a quick look over the pci code, it looks like a of code would be skipped we really need, like the platform code to turn off the GPU via ACPI. But I could also remember incorrectly on how all of that worked again. I can of course try and see what the effect of this patch would be.
I'm not in a position to test this myself. I would expect that if a device lacks a PCI power management capability, we could still use ACPI power management. My idea with this patch was to simulate that situation by clearing pdev->pm_cap so we treat the GPU as though it had no PCI PM capability.
Quoted 4 lines
And would the parent bus even go into D3hot if it knows one of its children is still at D0? Because that's what the result of that would be as well, no? And I know that if the bus stays in D0, that it has a negative impact on power consumption.
I don't understand this part. Are you saying you want the GPU in D0 and the upstream component (root port or switch) in D3hot?
I think the rule for the upstream component (the root port or switch leading to the GPU) is in PCIe spec 5.0, sec 5.3.2. Basically it says the upstream component cannot be in a lower power state than the GPU, i.e.,
- if the GPU is in D0, the upstream component must be in D0;
- if the GPU is in D2, the upstream component can be in D0-D2;
- if the GPU is in D3hot, the upstream component can be in D0-D3hot
So I don't understand how we *could* have the GPU in D0 and the upstream component in D3hot.
Quoted 50 lines
Anyway, I will try that out, I am just not seeing how that would help.
Quoted 47 lines
drivers/gpu/drm/nouveau/nouveau_drm.c +21
-0@@ -618,6 +618,23 @@ nouveau_drm_device_fini(struct drm_device *dev)kfree (drm); } +static void quirk_broken_nv_runpm (struct drm_device *drm_dev) +{ +struct pci_dev *pdev = drm_dev->pdev; +struct pci_dev *bridge =pci_upstream_bridge (pdev); + +if (!bridge || bridge->vendor !=PCI_VENDOR_ID_INTEL ) +return ; + +switch (bridge->device) { +case 0x1901 : +STASH ->pm_cap = pdev->pm_cap; + pdev->pm_cap =0 ; +NV_INFO (drm_dev,"Disabling PCI power management to avoid bug\n" ); +break ; + } +} +static int nouveau_drm_probe (struct pci_dev *pdev,const struct pci_device_id *pent) {@@ -699,6 +716,7 @@ static int nouveau_drm_probe(struct pci_dev *pdev,if (ret) goto fail_drm_dev_init; +quirk_broken_nv_runpm (drm_dev);return 0 ; fail_drm_dev_init:@@ -735,6 +753,9 @@ nouveau_drm_remove(struct pci_dev *pdev) {struct drm_device *dev =pci_get_drvdata (pdev); +/* If we disabled PCI power management, restore it */ +if (STASH ->pm_cap) + pdev->pm_cap =STASH ->pm_cap;nouveau_drm_device_remove (dev);pci_disable_device (pdev); }