dt-bindings: sound: convert rockchip i2s bindings to yaml
Subsystems (3)
PATCH 1/2 dt-bindings: sound: convert rockchip i2s bindings to yaml
Current dts files with 'i2s' nodes are manually verified. In order to automate this process rockchip-i2s.txt has to be converted to yaml.
--- .../devicetree/bindings/sound/rockchip-i2s.txt | 49 ---------- .../devicetree/bindings/sound/rockchip-i2s.yaml | 106 +++++++++++++++++++++ 2 files changed, 106 insertions(+), 49 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/rockchip-i2s.txt create mode 100644 Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
Documentation/devicetree/bindings/sound/rockchip-i2s.txt deleted +0 -49
@@ -1,49 +0,0 @@ -* Rockchip I2S controller - -The I2S bus (Inter-IC sound bus) is a serial link for digital -audio data transfer between devices in the system. - -Required properties: - -- compatible: should be one of the following: - - "rockchip,rk3066-i2s": for rk3066 - - "rockchip,px30-i2s", "rockchip,rk3066-i2s": for px30 - - "rockchip,rk3036-i2s", "rockchip,rk3066-i2s": for rk3036 - - "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188 - - "rockchip,rk3228-i2s", "rockchip,rk3066-i2s": for rk3228 - - "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288 - - "rockchip,rk3328-i2s", "rockchip,rk3066-i2s": for rk3328 - - "rockchip,rk3366-i2s", "rockchip,rk3066-i2s": for rk3366 - - "rockchip,rk3368-i2s", "rockchip,rk3066-i2s": for rk3368 - - "rockchip,rk3399-i2s", "rockchip,rk3066-i2s": for rk3399 -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: should contain the I2S interrupt. -- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, - Documentation/devicetree/bindings/dma/dma.txt -- dma-names: should include "tx" and "rx". -- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names. -- clock-names: should contain the following: - - "i2s_hclk": clock for I2S BUS - - "i2s_clk" : clock for I2S controller -- rockchip,playback-channels: max playback channels, if not set, 8 channels default. -- rockchip,capture-channels: max capture channels, if not set, 2 channels default. - -Required properties for controller which support multi channels -playback/capture: - -- rockchip,grf: the phandle of the syscon node for GRF register. - -Example for rk3288 I2S controller: - -i2s@ff890000 { - compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s"; - reg = <0xff890000 0x10000>; - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&pdma1 0>, <&pdma1 1>; - dma-names = "tx", "rx"; - clock-names = "i2s_hclk", "i2s_clk"; - clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; - rockchip,playback-channels = <8>; - rockchip,capture-channels = <2>; -};
Documentation/devicetree/bindings/sound/rockchip-i2s.yaml new file +106 -0
106 lines not on this page · raw message
Signature · 1 line
2.11.0
PATCH 2/2 dt-bindings: sound: rockchip-i2s: add #sound-dai-cells property
'#sound-dai-cells' is required to properly interpret the list of DAI specified in the 'sound-dai' property, so add them to 'rockchip-i2s.yaml'
--- Documentation/devicetree/bindings/sound/rockchip-i2s.yaml | 5 +++++ 1 file changed, 5 insertions(+)
Documentation/devicetree/bindings/sound/rockchip-i2s.yaml +5 -0
@@ -77,6 +77,9 @@ properties: Required property for controllers which support multi channel playback/capture. + "#sound-dai-cells": + const: 0 + required: - compatible - reg
@@ -85,6 +88,7 @@ required: - clock-names - dmas - dma-names + - "#sound-dai-cells" additionalProperties: false
@@ -103,4 +107,5 @@ examples: dma-names = "tx", "rx"; rockchip,capture-channels = <2>; rockchip,playback-channels = <8>; + #sound-dai-cells = <0>; };
Signature · 1 line
2.11.0
Re: [PATCH v1 2/2] dt-bindings: sound: rockchip-i2s: add #sound-dai-cells property
Quoted 9 lines · Johan Jonker
'#sound-dai-cells' is required to properly interpret the list of DAI specified in the 'sound-dai' property, so add them to '
rockchip-i2s.yaml'Signed-off-by Johan Jonker <[email protected]>--- Documentation/devicetree/bindings/sound/rockchip-i2s.yaml | 5 +++++ 1 file changed, 5 insertions(+)
Quoted 4 lines · Johan Jonker
Current dts files with 'i2s' nodes are manually verified. In order to automate this process rockchip-i2s.txt has to be converted to yaml.
Quoted 8 lines
Signed-off-by Johan Jonker <[email protected]>--- .../devicetree/bindings/sound/rockchip-i2s.txt | 49 ---------- .../devicetree/bindings/sound/rockchip-i2s.yaml | 106 +++++++++++++++++++++ 2 files changed, 106 insertions(+), 49 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/rockchip-i2s.txt create mode 100644 Documentation/devicetree/bindings/sound/rockchip-i2s.yaml