Skip to contentSkip to conversation

kbuild: fix references to other documents

PATCH In review Masahiro Yamada 1 participant 2 messages Mar 11, 2020 – Mar 14, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 kbuild: fix references to other documents

All the files in Documentation/kbuild/ were converted to reST.

---

 Documentation/kbuild/kbuild.rst                 | 2 +-
 Documentation/kbuild/kconfig-macro-language.rst | 2 +-
 Documentation/kbuild/makefiles.rst              | 6 +++---
 3 files changed, 5 insertions(+), 5 deletions(-)
Documentation/kbuild/kbuild.rst +1 -1
index f1e5dce86af7..510f38d7e78a 100644
@@ -237,7 +237,7 @@ This is solely useful to speed up test compiles.
 KBUILD_EXTRA_SYMBOLS
 --------------------
 For modules that use symbols from other modules.
-See more details in modules.txt.
+See more details in modules.rst.
 
 ALLSOURCE_ARCHS
 ---------------
Documentation/kbuild/kconfig-macro-language.rst +1 -1
index 35b3263b7e40..8b413ef9603d 100644
@@ -44,7 +44,7 @@ intermediate::
             def_bool y
 
 Then, Kconfig moves onto the evaluation stage to resolve inter-symbol
-dependency as explained in kconfig-language.txt.
+dependency as explained in kconfig-language.rst.
 
 
 Variables
Documentation/kbuild/makefiles.rst +3 -3
index 6bc126a14b3d..04d5c01a2e99 100644
@@ -924,7 +924,7 @@ When kbuild executes, the following steps are followed (roughly):
 	$(KBUILD_AFLAGS_MODULE) is used to add arch-specific options that
 	are used for assembler.
 
-	From commandline AFLAGS_MODULE shall be used (see kbuild.txt).
+	From commandline AFLAGS_MODULE shall be used (see kbuild.rst).
 
     KBUILD_CFLAGS_KERNEL
 	$(CC) options specific for built-in
@@ -937,7 +937,7 @@ When kbuild executes, the following steps are followed (roughly):
 
 	$(KBUILD_CFLAGS_MODULE) is used to add arch-specific options that
 	are used for $(CC).
-	From commandline CFLAGS_MODULE shall be used (see kbuild.txt).
+	From commandline CFLAGS_MODULE shall be used (see kbuild.rst).
 
     KBUILD_LDFLAGS_MODULE
 	Options for $(LD) when linking modules
@@ -945,7 +945,7 @@ When kbuild executes, the following steps are followed (roughly):
 	$(KBUILD_LDFLAGS_MODULE) is used to add arch-specific options
 	used when linking modules. This is often a linker script.
 
-	From commandline LDFLAGS_MODULE shall be used (see kbuild.txt).
+	From commandline LDFLAGS_MODULE shall be used (see kbuild.rst).
 
     KBUILD_LDS
 
Signature · 1 line
2.17.1
#1 lore raw
Quoted 5 lines · Masahiro Yamada

All the files in Documentation/kbuild/ were converted to reST.

---

Applied to linux-kbuild.

Quoted 66 lines
 Documentation/kbuild/kbuild.rst                 | 2 +-
 Documentation/kbuild/kconfig-macro-language.rst | 2 +-
 Documentation/kbuild/makefiles.rst              | 6 +++---
 3 files changed, 5 insertions(+), 5 deletions(-)
Documentation/kbuild/kbuild.rst +1 -1
index f1e5dce86af7..510f38d7e78a 100644
@@ -237,7 +237,7 @@ This is solely useful to speed up test compiles.
 KBUILD_EXTRA_SYMBOLS
 --------------------
 For modules that use symbols from other modules.
-See more details in modules.txt.
+See more details in modules.rst.
 
 ALLSOURCE_ARCHS
 ---------------
Documentation/kbuild/kconfig-macro-language.rst +1 -1
index 35b3263b7e40..8b413ef9603d 100644
@@ -44,7 +44,7 @@ intermediate::
             def_bool y
 
 Then, Kconfig moves onto the evaluation stage to resolve inter-symbol
-dependency as explained in kconfig-language.txt.
+dependency as explained in kconfig-language.rst.
 
 
 Variables
Documentation/kbuild/makefiles.rst +3 -4
index 6bc126a14b3d..04d5c01a2e99 100644
@@ -924,7 +924,7 @@ When kbuild executes, the following steps are followed (roughly):
        $(KBUILD_AFLAGS_MODULE) is used to add arch-specific options that
        are used for assembler.
 
-       From commandline AFLAGS_MODULE shall be used (see kbuild.txt).
+       From commandline AFLAGS_MODULE shall be used (see kbuild.rst).
 
     KBUILD_CFLAGS_KERNEL
        $(CC) options specific for built-in
@@ -937,7 +937,7 @@ When kbuild executes, the following steps are followed (roughly):
 
        $(KBUILD_CFLAGS_MODULE) is used to add arch-specific options that
        are used for $(CC).
-       From commandline CFLAGS_MODULE shall be used (see kbuild.txt).
+       From commandline CFLAGS_MODULE shall be used (see kbuild.rst).
 
     KBUILD_LDFLAGS_MODULE
        Options for $(LD) when linking modules
@@ -945,7 +945,7 @@ When kbuild executes, the following steps are followed (roughly):
        $(KBUILD_LDFLAGS_MODULE) is used to add arch-specific options
        used when linking modules. This is often a linker script.
 
-       From commandline LDFLAGS_MODULE shall be used (see kbuild.txt).
+       From commandline LDFLAGS_MODULE shall be used (see kbuild.rst).
 
     KBUILD_LDS
 
--

2.17.1

Signature · 2 lines
Best Regards
Masahiro Yamada