RISC-V page table dumper
v3 cover RISC-V page table dumper
This patch supports dumping page tables, and it's implemented on top of the generic page table dumper patch set.
Changed in v3:
- Modify warning message.
Changed in v2:
- Remove unnecessary #ifdef directive.
Zong Li (2):
riscv: Add support to dump the kernel page tables
riscv: Use macro definition instead of magic number
arch/riscv/Kconfig | 1 + arch/riscv/include/asm/kasan.h | 2 +- arch/riscv/include/asm/pgtable.h | 10 + arch/riscv/include/asm/ptdump.h | 11 ++ arch/riscv/mm/Makefile | 1 + arch/riscv/mm/ptdump.c | 317 +++++++++++++++++++++++++++++++ 6 files changed, 341 insertions(+), 1 deletion(-) create mode 100644 arch/riscv/include/asm/ptdump.h create mode 100644 arch/riscv/mm/ptdump.c
Signature · 1 line
2.25.1
PATCH v3 1/2 riscv: Add support to dump the kernel page tables
In a similar manner to arm64, x86, powerpc, etc., it can traverse all page tables, and dump the page table layout with the memory types and permissions.
Add a debugfs file at /sys/kernel/debug/kernel_page_tables to export the page table layout to userspace.
--- arch/riscv/Kconfig | 1 + arch/riscv/include/asm/pgtable.h | 10 + arch/riscv/include/asm/ptdump.h | 11 ++ arch/riscv/mm/Makefile | 1 + arch/riscv/mm/ptdump.c | 317 +++++++++++++++++++++++++++++++ 5 files changed, 340 insertions(+) create mode 100644 arch/riscv/include/asm/ptdump.h create mode 100644 arch/riscv/mm/ptdump.c
arch/riscv/Kconfig +1 -0
@@ -29,6 +29,7 @@ config RISCV select GENERIC_SMP_IDLE_THREAD select GENERIC_ATOMIC64 if !64BIT select GENERIC_IOREMAP + select GENERIC_PTDUMP if MMU select HAVE_ARCH_AUDITSYSCALL select HAVE_ARCH_SECCOMP_FILTER select HAVE_ASM_MODVERSIONS
arch/riscv/include/asm/pgtable.h +10 -0
@@ -444,6 +444,16 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma,#endif #define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE) +/* +* In the RV64 Linux scheme, we give the user half of the virtual-address space +* and give the kernel the other (upper) half. +*/ +#ifdef CONFIG_64BIT +#define KERN_VIRT_START (-(BIT(CONFIG_VA_BITS)) + TASK_SIZE) +#else +#define KERN_VIRT_START FIXADDR_START +#endif +/* * Task size is 0x4000000000 for RV64 or 0x9fc00000 for RV32. * Note that PGDIR_SIZE must evenly divide TASK_SIZE.
arch/riscv/include/asm/ptdump.h new file +11 -0
@@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (C) 2019 SiFive +*/ + +#ifndef _ASM_RISCV_PTDUMP_H +#define _ASM_RISCV_PTDUMP_H + +void ptdump_check_wx (void ); + +#endif /* _ASM_RISCV_PTDUMP_H */
arch/riscv/mm/Makefile +1 -0
@@ -15,6 +15,7 @@ ifeq ($(CONFIG_MMU),y) obj-$(CONFIG_SMP) += tlbflush.o endif obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o +obj-$(CONFIG_PTDUMP_CORE) += ptdump.o obj-$(CONFIG_KASAN) += kasan_init.o ifdef CONFIG_KASAN
arch/riscv/mm/ptdump.c new file +317 -0
317 lines not on this page · raw message
Signature · 1 line
2.25.1
PATCH v3 2/2 riscv: Use macro definition instead of magic number
In reply to Zong LiThe KERN_VIRT_START defines the start virtual address of kernel space. Use this macro instead of magic number.
--- arch/riscv/include/asm/kasan.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/riscv/include/asm/kasan.h +1 -1
@@ -13,7 +13,7 @@#define KASAN_SHADOW_SCALE_SHIFT 3#define KASAN_SHADOW_SIZE (UL(1) << (38 - KASAN_SHADOW_SCALE_SHIFT)) -#define KASAN_SHADOW_START 0xffffffc000000000/* 2^64 - 2^38 */ +#define KASAN_SHADOW_START KERN_VIRT_START/* 2^64 - 2^38 */ #define KASAN_SHADOW_END (KASAN_SHADOW_START + KASAN_SHADOW_SIZE)#define KASAN_SHADOW_OFFSET (KASAN_SHADOW_END - (1ULL << \
Signature · 1 line
2.25.1