Test configurable poll delay in perf OA
cover Test configurable poll delay in perf OA
Add tests that verify the configurable poll delay in perf OA.
Lionel Landwerlin (2):
include/drm-uapi: Update i915_drm.h for perf OA APIs tests/perf: new tests for parameterized OA buffer polling
include/drm-uapi/i915_drm.h | 13 ++++ tests/perf.c | 132 ++++++++++++++++++++++++++---------- 2 files changed, 111 insertions(+), 34 deletions(-)
Signature · 6 lines
2.17.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH 1/2 include/drm-uapi: Update i915_drm.h for perf OA APIs
From: Lionel Landwerlin <[email protected]>
Add APIs to configure poll delay in perf OA.
v2: (Umesh)
- Remove interrupt and flush APIs
- Change commit message
--- include/drm-uapi/i915_drm.h | 13 +++++++++++++ 1 file changed, 13 insertions(+)
include/drm-uapi/i915_drm.h +13 -0
@@ -1969,6 +1969,19 @@ enum drm_i915_perf_property_id {*/ DRM_I915_PERF_PROP_HOLD_PREEMPTION , +/** +* This optional parameter specifies the timer interval in nanoseconds +* at which the i915 driver will check the OA buffer for available data. +* Minimum allowed value is 100 microseconds. A default value is used by +* the driver if this parameter is not specified. Note that a large +* value may reduce cpu consumption during OA perf captures, but it +* would also potentially result in OA buffer overwrite as the captures +* reach end of the OA buffer. +* +* This property is available in perf revision 4. +*/ +DRM_I915_PERF_PROP_POLL_OA_DELAY , + DRM_I915_PERF_PROP_MAX /* non-ABI */ };
Signature · 6 lines
2.17.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH 2/2 tests/perf: new tests for parameterized OA buffer polling
In reply to Umesh Nerlige RamappaFrom: Lionel Landwerlin <[email protected]>
2 new tests verifying that the OA buffer is properly checked at the frequency specified by userspace.
v2: (Umesh)
- Capture start_times in test_polling
- Second parameterized test used a 500us hrtimer. Occassionally, this timing does not fall within the duration/100 requirement for the time spent in kernel. Change this value to 2ms to accommodate all platforms.
--- tests/perf.c | 132 ++++++++++++++++++++++++++++++++++++++------------- 1 file changed, 98 insertions(+), 34 deletions(-)
tests/perf.c +98 -34
@@ -234,6 +234,24 @@ get_oa_format(enum drm_i915_oa_format format)return gen8_oa_formats[format]; } +static char * +pretty_print_oa_period (uint64_t oa_period_ns) +{ +static char result[100 ]; +static const char *units[4 ] = {"ns" ,"us" ,"ms" ,"s" }; +double val = oa_period_ns; +int iter =0 ; + +while (iter < (ARRAY_SIZE (units) -1 ) && + val >=1000.0f ) { + val /=1000.0f ; + iter++; + } + +snprintf (result,sizeof (result),"%.3f%s" , val, units[iter]); +return result; +} +static void __perf_close (int fd) {
@@ -1921,15 +1939,9 @@ get_time(void)* kernelspace. */ static void -test_blocking (void ) +test_blocking (uint64_t requested_oa_period,bool set_kernel_hrtimer,uint64_t kernel_hrtimer) { -/* ~40 milliseconds -* -* Having a period somewhat > sysconf(_SC_CLK_TCK) helps to stop -* scheduling (liable to kick in when we make blocking poll()s/reads) -* from interfering with the test. -*/ -int oa_exponent =max_oa_exponent_for_period_lte (40000000 ); +int oa_exponent =max_oa_exponent_for_period_lte (requested_oa_period);uint64_t oa_period =oa_exponent_to_ns (oa_exponent);uint64_t properties[] = {/* Include OA reports in samples */
@@ -1939,11 +1951,16 @@ test_blocking(void)DRM_I915_PERF_PROP_OA_METRICS_SET , test_set->perf_oa_metrics_set,DRM_I915_PERF_PROP_OA_FORMAT , test_set->perf_oa_format,DRM_I915_PERF_PROP_OA_EXPONENT , oa_exponent, + +/* Kernel configuration (optional) */ + DRM_I915_PERF_PROP_POLL_OA_DELAY, kernel_hrtimer, };struct drm_i915_perf_open_param param = { .flags =I915_PERF_FLAG_FD_CLOEXEC |I915_PERF_FLAG_DISABLED , - .num_properties =sizeof (properties) /16 , + .num_properties = (set_kernel_hrtimer ? + (ARRAY_SIZE (properties) /2 ) : + ((ARRAY_SIZE (properties) /2 ) -1 )), .properties_ptr =to_user_pointer (properties), };uint8_t buf[1024 *1024 ];
@@ -1965,7 +1982,7 @@ test_blocking(void)* the knowledge that that the driver uses a 200Hz hrtimer (5ms period) * to check for data and giving some time to read(). */ -int min_iterations = (test_duration_ns / (oa_period +6000000ull )); +int min_iterations = (test_duration_ns / (oa_period + kernel_hrtimer + kernel_hrtimer /5 ));int64_t start, end;int n =0 ;
@@ -1975,9 +1992,10 @@ test_blocking(void)times (&start_times);igt_debug ("tick length = %dns, test duration = %" PRIu64"ns, min iter. = %d," -" estimated max iter. = %d, oa_period = %" PRIu64"ns\n" , +" estimated max iter. = %d, oa_period = %s\n" , (int )tick_ns, test_duration_ns, - min_iterations, max_iterations, oa_period); + min_iterations, max_iterations, +pretty_print_oa_period (oa_period));/* In the loop we perform blocking polls while the HW is sampling at * ~25Hz, with the expectation that we spend most of our time blocked
@@ -2079,15 +2097,9 @@ test_blocking(void) }static void -test_polling (void ) +test_polling (uint64_t requested_oa_period,bool set_kernel_hrtimer,uint64_t kernel_hrtimer) { -/* ~40 milliseconds -* -* Having a period somewhat > sysconf(_SC_CLK_TCK) helps to stop -* scheduling (liable to kick in when we make blocking poll()s/reads) -* from interfering with the test. -*/ -int oa_exponent =max_oa_exponent_for_period_lte (40000000 ); +int oa_exponent =max_oa_exponent_for_period_lte (requested_oa_period);uint64_t oa_period =oa_exponent_to_ns (oa_exponent);uint64_t properties[] = {/* Include OA reports in samples */
@@ -2097,12 +2109,17 @@ test_polling(void)DRM_I915_PERF_PROP_OA_METRICS_SET , test_set->perf_oa_metrics_set,DRM_I915_PERF_PROP_OA_FORMAT , test_set->perf_oa_format,DRM_I915_PERF_PROP_OA_EXPONENT , oa_exponent, + +/* Kernel configuration (optional) */ + DRM_I915_PERF_PROP_POLL_OA_DELAY, kernel_hrtimer, };struct drm_i915_perf_open_param param = { .flags =I915_PERF_FLAG_FD_CLOEXEC |I915_PERF_FLAG_DISABLED |I915_PERF_FLAG_FD_NONBLOCK , - .num_properties =sizeof (properties) /16 , + .num_properties = (set_kernel_hrtimer ? + (ARRAY_SIZE (properties) /2 ) : + ((ARRAY_SIZE (properties) /2 ) -1 )), .properties_ptr =to_user_pointer (properties), };uint8_t buf[1024 *1024 ];
@@ -2116,15 +2133,16 @@ test_polling(void)int n_extra_iterations =0 ;/* It's a bit tricky to put a lower limit here, but we expect a -* relatively low latency for seeing reports, while we don't currently -* give any control over this in the api. +* relatively low latency for seeing reports. * -* We assume a maximum latency of 6 millisecond to deliver a POLLIN and -* read() after a new sample is written (46ms per iteration) considering -* the knowledge that that the driver uses a 200Hz hrtimer (5ms period) -* to check for data and giving some time to read(). +* We assume a maximum latency of kernel_hrtimer + some margin +* to deliver a POLLIN and read() after a new sample is +* written (40ms + hrtimer + margin per iteration) considering +* the knowledge that that the driver uses a 200Hz hrtimer +* (5ms period) to check for data and giving some time to +* read(). */ -int min_iterations = (test_duration_ns / (oa_period +6000000ull )); +int min_iterations = (test_duration_ns / (oa_period + (kernel_hrtimer + kernel_hrtimer /5 )));int64_t start, end;int n =0 ;
@@ -2132,8 +2150,9 @@ test_polling(void)times (&start_times); -igt_debug ("tick length = %dns, test duration = %" PRIu64"ns, min iter. = %d, max iter. = %d\n" , - (int )tick_ns, test_duration_ns, +igt_debug ("tick length = %dns, oa period = %s, " +"test duration = %" PRIu64"ns, min iter. = %d, max iter. = %d\n" , + (int )tick_ns,pretty_print_oa_period (oa_period), test_duration_ns, min_iterations, max_iterations);/* In the loop we perform blocking polls while the HW is sampling at
@@ -4502,6 +4521,23 @@ test_sysctl_defaults(void)igt_assert_eq (max_freq,100000 ); } +static int i915_perf_revision (int fd) +{ +drm_i915_getparam_t gp; +int value =1 , ret; + + gp.param =I915_PARAM_PERF_REVISION ; + gp.value = &value; + ret =igt_ioctl (drm_fd,DRM_IOCTL_I915_GETPARAM , &gp); +if (ret ==-1 ) { +/* If the param is missing, consider version 1. */ +igt_assert_eq (errno,EINVAL ); +return 1 ; + } + +return value; +} +igt_main { igt_fixture {
@@ -4584,11 +4620,39 @@ igt_main igt_subtest("enable-disable")test_enable_disable (); - igt_subtest("blocking") -test_blocking (); + igt_subtest("blocking") { +test_blocking (40 *1000 *1000 /* 40ms oa period */ , + false/* set_kernel_hrtimer */ , +5 *1000 *1000 /* default 5ms/200Hz hrtimer */ ); + } + + igt_subtest("blocking-parameterized") { +igt_require (i915_perf_revision (drm_fd) >=2 ); + +test_blocking (10 *1000 *1000 /* 10ms oa period */ , + true/* set_kernel_hrtimer */ , +40 *1000 *1000 /* default 40ms hrtimer */ ); +test_blocking (500 *1000 /* 500us oa period */ , + true/* set_kernel_hrtimer */ , +2 *1000 *1000 /* default 2ms hrtimer */ ); + } - igt_subtest("polling") -test_polling (); + igt_subtest("polling") { +test_polling (40 *1000 *1000 /* 40ms oa period */ , + false/* set_kernel_hrtimer */ , +5 *1000 *1000 /* default 5ms/200Hz hrtimer */ ); + } + + igt_subtest("polling-parameterized") { +igt_require (i915_perf_revision (drm_fd) >=2 ); + +test_polling (10 *1000 *1000 /* 10ms oa period */ , + true/* set_kernel_hrtimer */ , +40 *1000 *1000 /* default 40ms hrtimer */ ); +test_polling (500 *1000 /* 500us oa period */ , + true/* set_kernel_hrtimer */ , +2 *1000 *1000 /* default 2ms hrtimer */ ); + } igt_subtest("short-reads")test_short_reads ();
Signature · 6 lines
2.17.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] [PATCH i-g-t 2/2] tests/perf: new tests for parameterized OA buffer polling
Quoted 70 lines · Umesh Nerlige Ramappa
From: Lionel Landwerlin <[email protected]>
2 new tests verifying that the OA buffer is properly checked at the frequency specified by userspace.
v2: (Umesh)
- Capturestart_timesintest_polling
- Second parameterized test used a 500us hrtimer. Occassionally, this timing does not fall within the duration/100 requirement for the time spent in kernel. Change this value to 2ms to accommodate all platforms.Signed-off-by Lionel Landwerlin <[email protected]>Signed-off-by Umesh Nerlige Ramappa <[email protected]>--- tests/perf.c | 132 ++++++++++++++++++++++++++++++++++++++------------- 1 file changed, 98 insertions(+), 34 deletions(-)tests/perf.c +21
-8@@ -234,6 +234,24 @@ get_oa_format(enum drm_i915_oa_format format)return gen8_oa_formats[format]; } +static char * +pretty_print_oa_period (uint64_t oa_period_ns) +{ +static char result[100 ]; +static const char *units[4 ] = {"ns" ,"us" ,"ms" ,"s" }; +double val = oa_period_ns; +int iter =0 ; + +while (iter < (ARRAY_SIZE (units) -1 ) && + val >=1000.0f ) { + val /=1000.0f ; + iter++; + } + +snprintf (result,sizeof (result),"%.3f%s" , val, units[iter]); +return result; +} +static void __perf_close (int fd) {@@ -1921,15 +1939,9 @@ get_time(void)* kernelspace. */ static void -test_blocking (void ) +test_blocking (uint64_t requested_oa_period,bool set_kernel_hrtimer,uint64_t kernel_hrtimer) { -/* ~40 milliseconds -* -* Having a period somewhat > sysconf(_SC_CLK_TCK) helps to stop -* scheduling (liable to kick in when we make blocking poll()s/reads) -* from interfering with the test. -*/ -int oa_exponent =max_oa_exponent_for_period_lte (40000000 ); +int oa_exponent =max_oa_exponent_for_period_lte (requested_oa_period);uint64_t oa_period =oa_exponent_to_ns (oa_exponent);uint64_t properties[] = {/* Include OA reports in samples */ @@ -1939,11 +1951,16 @@ test_blocking(void)DRM_I915_PERF_PROP_OA_METRICS_SET , test_set->perf_oa_metrics_set,DRM_I915_PERF_PROP_OA_FORMAT , test_set->perf_oa_format, DRM_I915_PERF_PROP_OA_EXPONENT, oa_exponent, +
tests/perf.c test_blocking(void) · line 1963
Quoted 10 lines
tests/perf.c +5
-1+/* Kernel configuration (optional) */ + DRM_I915_PERF_PROP_POLL_OA_DELAY, kernel_hrtimer, };struct drm_i915_perf_open_param param = { .flags =I915_PERF_FLAG_FD_CLOEXEC |I915_PERF_FLAG_DISABLED , - .num_properties =sizeof (properties) /16 , + .num_properties = (set_kernel_hrtimer ? + (ARRAY_SIZE (properties) /2 ) : + ((ARRAY_SIZE (properties) /2 ) -1 )),
There is a NUM_PROPERTIES() macro at the top of the file you could reuse for this :
set_kernel_hrtimer ? NUM_PROPERTIES(properties) : (NUM_PROPERTIES(properties) - 1)
Quoted 49 lines
tests/perf.c +8
-11.properties_ptr = to_user_pointer(properties), };uint8_t buf[1024 *1024 ];@@ -1965,7 +1982,7 @@ test_blocking(void)* the knowledge that that the driver uses a 200Hz hrtimer (5ms period) * to check for data and giving some time to read(). */ -int min_iterations = (test_duration_ns / (oa_period +6000000ull )); +int min_iterations = (test_duration_ns / (oa_period + kernel_hrtimer + kernel_hrtimer /5 ));int64_t start, end;int n =0 ;@@ -1975,9 +1992,10 @@ test_blocking(void)times (&start_times);igt_debug ("tick length = %dns, test duration = %" PRIu64"ns, min iter. = %d," -" estimated max iter. = %d, oa_period = %" PRIu64"ns\n" , +" estimated max iter. = %d, oa_period = %s\n" , (int )tick_ns, test_duration_ns, - min_iterations, max_iterations, oa_period); + min_iterations, max_iterations, +pretty_print_oa_period (oa_period));/* In the loop we perform blocking polls while the HW is sampling at * ~25Hz, with the expectation that we spend most of our time blocked @@ -2079,15 +2097,9 @@ test_blocking(void) }static void -test_polling (void ) +test_polling (uint64_t requested_oa_period,bool set_kernel_hrtimer,uint64_t kernel_hrtimer) { -/* ~40 milliseconds -* -* Having a period somewhat > sysconf(_SC_CLK_TCK) helps to stop -* scheduling (liable to kick in when we make blocking poll()s/reads) -* from interfering with the test. -*/ -int oa_exponent =max_oa_exponent_for_period_lte (40000000 ); +int oa_exponent =max_oa_exponent_for_period_lte (requested_oa_period);uint64_t oa_period =oa_exponent_to_ns (oa_exponent);uint64_t properties[] = {/* Include OA reports in samples */ @@ -2097,12 +2109,17 @@ test_polling(void)DRM_I915_PERF_PROP_OA_METRICS_SET , test_set->perf_oa_metrics_set,DRM_I915_PERF_PROP_OA_FORMAT , test_set->perf_oa_format, DRM_I915_PERF_PROP_OA_EXPONENT, oa_exponent, + +/* Kernel configuration (optional) */
tests/perf.c test_polling(void) · line 2122
Quoted 10 lines
tests/perf.c +4
-1+ DRM_I915_PERF_PROP_POLL_OA_DELAY, kernel_hrtimer, };struct drm_i915_perf_open_param param = { .flags =I915_PERF_FLAG_FD_CLOEXEC |I915_PERF_FLAG_DISABLED |I915_PERF_FLAG_FD_NONBLOCK , - .num_properties =sizeof (properties) /16 , + .num_properties = (set_kernel_hrtimer ? + (ARRAY_SIZE (properties) /2 ) : + ((ARRAY_SIZE (properties) /2 ) -1 )),
Same here.
Quoted 67 lines
tests/perf.c +28
-9.properties_ptr = to_user_pointer(properties), };uint8_t buf[1024 *1024 ];@@ -2116,15 +2133,16 @@ test_polling(void)int n_extra_iterations =0 ;/* It's a bit tricky to put a lower limit here, but we expect a -* relatively low latency for seeing reports, while we don't currently -* give any control over this in the api. +* relatively low latency for seeing reports. * -* We assume a maximum latency of 6 millisecond to deliver a POLLIN and -* read() after a new sample is written (46ms per iteration) considering -* the knowledge that that the driver uses a 200Hz hrtimer (5ms period) -* to check for data and giving some time to read(). +* We assume a maximum latency of kernel_hrtimer + some margin +* to deliver a POLLIN and read() after a new sample is +* written (40ms + hrtimer + margin per iteration) considering +* the knowledge that that the driver uses a 200Hz hrtimer +* (5ms period) to check for data and giving some time to +* read(). */ -int min_iterations = (test_duration_ns / (oa_period +6000000ull )); +int min_iterations = (test_duration_ns / (oa_period + (kernel_hrtimer + kernel_hrtimer /5 )));int64_t start, end;int n =0 ;@@ -2132,8 +2150,9 @@ test_polling(void)times (&start_times); -igt_debug ("tick length = %dns, test duration = %" PRIu64"ns, min iter. = %d, max iter. = %d\n" , - (int )tick_ns, test_duration_ns, +igt_debug ("tick length = %dns, oa period = %s, " +"test duration = %" PRIu64"ns, min iter. = %d, max iter. = %d\n" , + (int )tick_ns,pretty_print_oa_period (oa_period), test_duration_ns, min_iterations, max_iterations);/* In the loop we perform blocking polls while the HW is sampling at @@ -4502,6 +4521,23 @@ test_sysctl_defaults(void)igt_assert_eq (max_freq,100000 ); } +static int i915_perf_revision (int fd) +{ +drm_i915_getparam_t gp; +int value =1 , ret; + + gp.param =I915_PARAM_PERF_REVISION ; + gp.value = &value; + ret =igt_ioctl (drm_fd,DRM_IOCTL_I915_GETPARAM , &gp); +if (ret ==-1 ) { +/* If the param is missing, consider version 1. */ +igt_assert_eq (errno,EINVAL ); +return 1 ; + } + +return value; +} +igt_main { igt_fixture {@@ -4584,11 +4620,39 @@ igt_main igt_subtest("enable-disable")test_enable_disable ();
tests/perf.c igt_main · line 4630
Quoted 10 lines
tests/perf.c +8
-2- igt_subtest("blocking") -test_blocking (); + igt_subtest("blocking") { +test_blocking (40 *1000 *1000 /* 40ms oa period */ , + false/* set_kernel_hrtimer */ , +5 *1000 *1000 /* default 5ms/200Hz hrtimer */ ); + } + + igt_subtest("blocking-parameterized") { +igt_require (i915_perf_revision (drm_fd) >=2 );
The kernel patches are revision 4.
Quoted 9 lines
tests/perf.c +8
-0+ +test_blocking (10 *1000 *1000 /* 10ms oa period */ , + true/* set_kernel_hrtimer */ , +40 *1000 *1000 /* default 40ms hrtimer */ ); +test_blocking (500 *1000 /* 500us oa period */ , + true/* set_kernel_hrtimer */ , +2 *1000 *1000 /* default 2ms hrtimer */ ); + }
tests/perf.c igt_main · line 4647
Quoted 10 lines
tests/perf.c +8
-2- igt_subtest("polling") -test_polling (); + igt_subtest("polling") { +test_polling (40 *1000 *1000 /* 40ms oa period */ , + false/* set_kernel_hrtimer */ , +5 *1000 *1000 /* default 5ms/200Hz hrtimer */ ); + } + + igt_subtest("polling-parameterized") { +igt_require (i915_perf_revision (drm_fd) >=2 );
Same revision 4 here.
tests/perf.c igt_main · line 4658
Quoted 11 lines
tests/perf.c +8
-0+ +test_polling (10 *1000 *1000 /* 10ms oa period */ , + true/* set_kernel_hrtimer */ , +40 *1000 *1000 /* default 40ms hrtimer */ ); +test_polling (500 *1000 /* 500us oa period */ , + true/* set_kernel_hrtimer */ , +2 *1000 *1000 /* default 2ms hrtimer */ ); + } igt_subtest("short-reads")test_short_reads ();
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✗ GitLab.Pipeline: failure for Test configurable poll delay in perf OA
In reply to Umesh Nerlige Ramappa== Series Details ==
== Series Details ==
Series: Test configurable poll delay in perf OA
URL : https://patchwork.freedesktop.org/series/74655/
State : failure
== Summary ==
ERROR! This series introduces new undocumented tests:
perf@blocking-parameterized
perf@polling-parameterized
Can you document them as per the requirement in the [CONTRIBUTING.md]?
[Documentation] has more details on how to do this.
Here are few examples:
https://gitlab.freedesktop.org/drm/igt-gpu-tools/commit/0316695d03aa46108296b27f3982ec93200c7a6e
https://gitlab.freedesktop.org/drm/igt-gpu-tools/commit/443cc658e1e6b492ee17bf4f4d891029eb7a205d
Thanks in advance!
[CONTRIBUTING.md]: https://gitlab.freedesktop.org/drm/igt-gpu-tools/blob/master/CONTRIBUTING.md#L19
[Documentation]: https://drm.pages.freedesktop.org/igt-gpu-tools/igt-gpu-tools-Core.html#igt-describe
Other than that, pipeline status: SUCCESS.
see https://gitlab.freedesktop.org/gfx-ci/igt-ci-tags/pipelines/119318 for the overview.
== Logs ==
For more details see: https://gitlab.freedesktop.org/gfx-ci/igt-ci-tags/pipelines/119318
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.BAT: success for Test configurable poll delay in perf OA
In reply to Umesh Nerlige Ramappa== Series Details ==
== Series Details ==
Series: Test configurable poll delay in perf OA
URL : https://patchwork.freedesktop.org/series/74655/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_8130 -> IGTPW_4299
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/index.html
Known issues
------------
Here are the changes found in IGTPW_4299 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_suspend@basic-s4-devices:
- fi-tgl-y: [PASS][1] -> [FAIL][2] ([CI#94])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/fi-tgl-y/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/fi-tgl-y/igt@[email protected]
* igt@i915_selftest@live@execlists:
- fi-apl-guc: [PASS][3] -> [INCOMPLETE][4] ([fdo#103927])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/fi-apl-guc/igt@i915_selftest@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/fi-apl-guc/igt@i915_selftest@[email protected]
* igt@i915_selftest@live@hangcheck:
- fi-icl-guc: [PASS][5] -> [INCOMPLETE][6] ([fdo#108569])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/fi-icl-guc/igt@i915_selftest@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/fi-icl-guc/igt@i915_selftest@[email protected]
- fi-apl-guc: [PASS][7] -> [DMESG-WARN][8] ([i915#1430])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/fi-apl-guc/igt@i915_selftest@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/fi-apl-guc/igt@i915_selftest@[email protected]
#### Possible fixes ####
* igt@i915_selftest@live@execlists:
- fi-icl-y: [DMESG-FAIL][9] ([fdo#108569]) -> [PASS][10]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/fi-icl-y/igt@i915_selftest@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/fi-icl-y/igt@i915_selftest@[email protected]
* igt@kms_chamelium@hdmi-hpd-fast:
- fi-kbl-7500u: [FAIL][11] ([i915#323]) -> [PASS][12]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/fi-kbl-7500u/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/fi-kbl-7500u/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[CI#94]: https://gitlab.freedesktop.org/gfx-ci/i915-infra/issues/94
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#108569]: https://bugs.freedesktop.org/show_bug.cgi?id=108569
[fdo#112259]: https://bugs.freedesktop.org/show_bug.cgi?id=112259
[i915#1430]: https://gitlab.freedesktop.org/drm/intel/issues/1430
[i915#323]: https://gitlab.freedesktop.org/drm/intel/issues/323
[i915#656]: https://gitlab.freedesktop.org/drm/intel/issues/656
Participating hosts (41 -> 43)
------------------------------
Additional (7): fi-bsw-n3050 fi-byt-j1900 fi-glk-dsi fi-kbl-guc fi-cfl-8109u fi-blb-e6850 fi-kbl-r
Missing (5): fi-hsw-4200u fi-skl-6770hq fi-byt-squawks fi-bsw-cyan fi-bdw-samus
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_5506 -> IGTPW_4299
CI-20190529: 20190529
CI_DRM_8130: cf47ad003bc75f001bd33caedb28c8ba2e3c3d33 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_4299: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/index.html
IGT_5506: 59fd8a0d01dac58dc6c7d86ef391ed4393ab5aae @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
== Testlist changes ==
+igt@perf@blocking-parameterized
+igt@perf@polling-parameterized
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/index.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.IGT: success for Test configurable poll delay in perf OA
In reply to Umesh Nerlige Ramappa== Series Details ==
== Series Details ==
Series: Test configurable poll delay in perf OA
URL : https://patchwork.freedesktop.org/series/74655/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_8130_full -> IGTPW_4299_full
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/index.html
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in IGTPW_4299_full:
### IGT changes ###
#### Possible regressions ####
* {igt@perf@blocking-parameterized} (NEW):
- shard-kbl: NOTRUN -> [FAIL][1] +1 similar issue
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-kbl3/igt@[email protected]
- shard-iclb: NOTRUN -> [FAIL][2] +1 similar issue
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-iclb6/igt@[email protected]
- shard-apl: NOTRUN -> [FAIL][3] +1 similar issue
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-apl8/igt@[email protected]
* {igt@perf@polling-parameterized} (NEW):
- shard-glk: NOTRUN -> [FAIL][4] +1 similar issue
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-glk6/igt@[email protected]
- shard-hsw: NOTRUN -> [FAIL][5]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-hsw2/igt@[email protected]
- shard-tglb: NOTRUN -> [FAIL][6] +1 similar issue
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-tglb5/igt@[email protected]
New tests
---------
New tests have been introduced between CI_DRM_8130_full and IGTPW_4299_full:
### New IGT tests (2) ###
* igt@perf@blocking-parameterized:
- Statuses : 5 fail(s)
- Exec time: [0.01, 0.02] s
* igt@perf@polling-parameterized:
- Statuses : 6 fail(s) 1 skip(s)
- Exec time: [0.0, 0.34] s
Known issues
------------
Here are the changes found in IGTPW_4299_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_balancer@smoke:
- shard-iclb: [PASS][7] -> [SKIP][8] ([fdo#110854])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-iclb1/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-iclb6/igt@[email protected]
* igt@gem_exec_schedule@pi-distinct-iova-bsd:
- shard-iclb: [PASS][9] -> [SKIP][10] ([i915#677]) +2 similar issues
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-iclb7/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-iclb2/igt@[email protected]
* igt@gem_exec_schedule@promotion-bsd1:
- shard-iclb: [PASS][11] -> [SKIP][12] ([fdo#109276]) +21 similar issues
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-iclb2/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-iclb8/igt@[email protected]
* igt@gem_exec_schedule@reorder-wide-bsd:
- shard-iclb: [PASS][13] -> [SKIP][14] ([fdo#112146]) +2 similar issues
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-iclb8/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-iclb2/igt@[email protected]
* igt@gem_ppgtt@flink-and-close-vma-leak:
- shard-glk: [PASS][15] -> [FAIL][16] ([i915#644])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-glk4/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-glk5/igt@[email protected]
* igt@gem_workarounds@suspend-resume-fd:
- shard-kbl: [PASS][17] -> [DMESG-WARN][18] ([i915#180]) +2 similar issues
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-kbl4/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-kbl3/igt@[email protected]
* igt@gen9_exec_parse@allowed-all:
- shard-glk: [PASS][19] -> [INCOMPLETE][20] ([i915#58] / [k.org#198133])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-glk2/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-glk4/igt@[email protected]
* igt@i915_pm_rpm@debugfs-forcewake-user:
- shard-hsw: [PASS][21] -> [SKIP][22] ([fdo#109271]) +1 similar issue
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-hsw5/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-hsw5/igt@[email protected]
- shard-iclb: [PASS][23] -> [SKIP][24] ([i915#1316])
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-iclb4/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-iclb3/igt@[email protected]
- shard-tglb: [PASS][25] -> [SKIP][26] ([i915#1316])
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-tglb6/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-tglb8/igt@[email protected]
* igt@i915_pm_rpm@modeset-non-lpsp-stress-no-wait:
- shard-glk: [PASS][27] -> [SKIP][28] ([fdo#109271]) +1 similar issue
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-glk9/igt@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-glk7/igt@[email protected]
* igt@kms_color@pipe-c-ctm-green-to-red:
- shard-kbl: [PASS][29] -> [FAIL][30] ([i915#129])
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-kbl7/igt@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-kbl4/igt@[email protected]
- shard-apl: [PASS][31] -> [FAIL][32] ([i915#129])
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-apl4/igt@[email protected]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-apl2/igt@[email protected]
* igt@kms_cursor_crc@pipe-a-cursor-suspend:
- shard-kbl: [PASS][33] -> [INCOMPLETE][34] ([i915#155])
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-kbl2/igt@[email protected]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-kbl1/igt@[email protected]
* igt@kms_cursor_crc@pipe-b-cursor-dpms:
- shard-apl: [PASS][35] -> [FAIL][36] ([i915#54]) +1 similar issue
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-apl2/igt@[email protected]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-apl7/igt@[email protected]
* igt@kms_flip@flip-vs-expired-vblank:
- shard-apl: [PASS][37] -> [FAIL][38] ([i915#79])
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-apl1/igt@[email protected]
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-apl7/igt@[email protected]
* igt@kms_flip@flip-vs-expired-vblank-interruptible:
- shard-glk: [PASS][39] -> [FAIL][40] ([i915#79]) +1 similar issue
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-glk5/igt@[email protected]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-glk7/igt@[email protected]
* igt@kms_flip@plain-flip-ts-check-interruptible:
- shard-glk: [PASS][41] -> [FAIL][42] ([i915#34])
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-glk7/igt@[email protected]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-glk4/igt@[email protected]
* igt@kms_plane@plane-panning-bottom-right-suspend-pipe-a-planes:
- shard-iclb: [PASS][43] -> [INCOMPLETE][44] ([i915#250])
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-iclb6/igt@[email protected]
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-iclb3/igt@[email protected]
* igt@kms_plane_cursor@pipe-c-viewport-size-64:
- shard-apl: [PASS][45] -> [INCOMPLETE][46] ([fdo#103927])
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-apl3/igt@[email protected]
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-apl1/igt@[email protected]
* igt@kms_psr2_su@frontbuffer:
- shard-iclb: [PASS][47] -> [SKIP][48] ([fdo#109642] / [fdo#111068])
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-iclb2/igt@[email protected]
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-iclb8/igt@[email protected]
* igt@kms_setmode@basic:
- shard-apl: [PASS][49] -> [FAIL][50] ([i915#31])
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-apl6/igt@[email protected]
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-apl3/igt@[email protected]
- shard-glk: [PASS][51] -> [FAIL][52] ([i915#31])
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-glk4/igt@[email protected]
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-glk6/igt@[email protected]
* igt@kms_vblank@pipe-b-ts-continuation-suspend:
- shard-apl: [PASS][53] -> [DMESG-WARN][54] ([i915#180]) +3 similar issues
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-apl1/igt@[email protected]
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-apl1/igt@[email protected]
* igt@perf_pmu@busy-vcs1:
- shard-iclb: [PASS][55] -> [SKIP][56] ([fdo#112080]) +14 similar issues
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-iclb1/igt@[email protected]
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-iclb5/igt@[email protected]
#### Possible fixes ####
* igt@gem_busy@busy-vcs1:
- shard-iclb: [SKIP][57] ([fdo#112080]) -> [PASS][58] +11 similar issues
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-iclb3/igt@[email protected]
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-iclb2/igt@[email protected]
* igt@gem_ctx_persistence@close-replace-race:
- shard-kbl: [INCOMPLETE][59] ([i915#1402]) -> [PASS][60]
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-kbl4/igt@[email protected]
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-kbl3/igt@[email protected]
* igt@gem_ctx_shared@exec-single-timeline-bsd:
- shard-iclb: [SKIP][61] ([fdo#110841]) -> [PASS][62]
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-iclb4/igt@[email protected]
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-iclb5/igt@[email protected]
* igt@gem_exec_async@concurrent-writes-bsd:
- shard-iclb: [SKIP][63] ([fdo#112146]) -> [PASS][64] +3 similar issues
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-iclb1/igt@[email protected]
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-iclb6/igt@[email protected]
* igt@gem_exec_schedule@implicit-both-bsd:
- shard-iclb: [SKIP][65] ([i915#677]) -> [PASS][66] +1 similar issue
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-iclb4/igt@[email protected]
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-iclb7/igt@[email protected]
* igt@gem_exec_schedule@implicit-read-write-bsd1:
- shard-iclb: [SKIP][67] ([fdo#109276] / [i915#677]) -> [PASS][68] +1 similar issue
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-iclb6/igt@[email protected]
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-iclb2/igt@[email protected]
* igt@gem_exec_schedule@in-order-bsd2:
- shard-iclb: [SKIP][69] ([fdo#109276]) -> [PASS][70] +13 similar issues
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-iclb3/igt@[email protected]
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-iclb4/igt@[email protected]
* igt@gem_exec_suspend@basic-s3:
- shard-kbl: [DMESG-WARN][71] ([i915#180]) -> [PASS][72] +5 similar issues
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-kbl6/igt@[email protected]
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-kbl3/igt@[email protected]
* igt@gem_exec_whisper@basic-fds-priority:
- shard-tglb: [TIMEOUT][73] ([i915#1408]) -> [PASS][74]
[73]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-tglb3/igt@[email protected]
[74]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-tglb8/igt@[email protected]
* igt@gem_ppgtt@flink-and-close-vma-leak:
- shard-kbl: [FAIL][75] ([i915#644]) -> [PASS][76]
[75]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-kbl3/igt@[email protected]
[76]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-kbl3/igt@[email protected]
* igt@i915_pm_rps@reset:
- shard-iclb: [FAIL][77] ([i915#413]) -> [PASS][78]
[77]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-iclb1/igt@[email protected]
[78]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-iclb5/igt@[email protected]
* igt@i915_suspend@debugfs-reader:
- shard-apl: [DMESG-WARN][79] ([i915#180]) -> [PASS][80] +1 similar issue
[79]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-apl3/igt@[email protected]
[80]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-apl4/igt@[email protected]
* igt@kms_flip@flip-vs-expired-vblank-interruptible:
- shard-kbl: [FAIL][81] ([i915#79]) -> [PASS][82]
[81]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-kbl6/igt@[email protected]
[82]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-kbl2/igt@[email protected]
* igt@kms_plane_lowres@pipe-a-tiling-x:
- shard-glk: [FAIL][83] ([i915#899]) -> [PASS][84]
[83]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-glk3/igt@[email protected]
[84]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-glk8/igt@[email protected]
* igt@kms_psr@psr2_cursor_blt:
- shard-iclb: [SKIP][85] ([fdo#109441]) -> [PASS][86]
[85]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-iclb4/igt@kms_psr@psr2_cursor_blt.html
[86]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-iclb2/igt@kms_psr@psr2_cursor_blt.html
* igt@kms_setmode@basic:
- shard-hsw: [FAIL][87] ([i915#31]) -> [PASS][88]
[87]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-hsw2/igt@[email protected]
[88]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-hsw2/igt@[email protected]
- shard-kbl: [FAIL][89] ([i915#31]) -> [PASS][90]
[89]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-kbl1/igt@[email protected]
[90]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-kbl7/igt@[email protected]
#### Warnings ####
* igt@gem_linear_blits@normal:
- shard-apl: [TIMEOUT][91] ([fdo#111732] / [i915#1322]) -> [TIMEOUT][92] ([i915#1322])
[91]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-apl7/igt@[email protected]
[92]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-apl3/igt@[email protected]
* igt@gem_userptr_blits@sync-unmap-after-close:
- shard-hsw: [DMESG-WARN][93] ([fdo#110789] / [fdo#111870]) -> [DMESG-WARN][94] ([fdo#111870])
[93]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-hsw2/igt@[email protected]
[94]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-hsw1/igt@[email protected]
- shard-snb: [DMESG-WARN][95] ([fdo#110789] / [fdo#111870] / [i915#478]) -> [DMESG-WARN][96] ([fdo#111870] / [i915#478])
[95]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-snb2/igt@[email protected]
[96]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-snb5/igt@[email protected]
* igt@i915_pm_rpm@modeset-non-lpsp-stress-no-wait:
- shard-tglb: [SKIP][97] ([fdo#111644] / [i915#1397]) -> [SKIP][98] ([i915#1316])
[97]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-tglb5/igt@[email protected]
[98]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-tglb8/igt@[email protected]
- shard-iclb: [SKIP][99] ([fdo#110892]) -> [SKIP][100] ([i915#1316])
[99]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-iclb2/igt@[email protected]
[100]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-iclb3/igt@[email protected]
* igt@runner@aborted:
- shard-kbl: ([FAIL][101], [FAIL][102]) ([i915#1389] / [i915#1402] / [i915#92]) -> [FAIL][103] ([i915#92])
[101]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-kbl2/igt@[email protected]
[102]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8130/shard-kbl4/igt@[email protected]
[103]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/shard-kbl6/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109276]: https://bugs.freedesktop.org/show_bug.cgi?id=109276
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[fdo#109642]: https://bugs.freedesktop.org/show_bug.cgi?id=109642
[fdo#110789]: https://bugs.freedesktop.org/show_bug.cgi?id=110789
[fdo#110841]: https://bugs.freedesktop.org/show_bug.cgi?id=110841
[fdo#110854]: https://bugs.freedesktop.org/show_bug.cgi?id=110854
[fdo#110892]: https://bugs.freedesktop.org/show_bug.cgi?id=110892
[fdo#111068]: https://bugs.freedesktop.org/show_bug.cgi?id=111068
[fdo#111644]: https://bugs.freedesktop.org/show_bug.cgi?id=111644
[fdo#111732]: https://bugs.freedesktop.org/show_bug.cgi?id=111732
[fdo#111870]: https://bugs.freedesktop.org/show_bug.cgi?id=111870
[fdo#112080]: https://bugs.freedesktop.org/show_bug.cgi?id=112080
[fdo#112146]: https://bugs.freedesktop.org/show_bug.cgi?id=112146
[i915#129]: https://gitlab.freedesktop.org/drm/intel/issues/129
[i915#1316]: https://gitlab.freedesktop.org/drm/intel/issues/1316
[i915#1322]: https://gitlab.freedesktop.org/drm/intel/issues/1322
[i915#1389]: https://gitlab.freedesktop.org/drm/intel/issues/1389
[i915#1397]: https://gitlab.freedesktop.org/drm/intel/issues/1397
[i915#1402]: https://gitlab.freedesktop.org/drm/intel/issues/1402
[i915#1408]: https://gitlab.freedesktop.org/drm/intel/issues/1408
[i915#155]: https://gitlab.freedesktop.org/drm/intel/issues/155
[i915#180]: https://gitlab.freedesktop.org/drm/intel/issues/180
[i915#250]: https://gitlab.freedesktop.org/drm/intel/issues/250
[i915#31]: https://gitlab.freedesktop.org/drm/intel/issues/31
[i915#34]: https://gitlab.freedesktop.org/drm/intel/issues/34
[i915#413]: https://gitlab.freedesktop.org/drm/intel/issues/413
[i915#478]: https://gitlab.freedesktop.org/drm/intel/issues/478
[i915#54]: https://gitlab.freedesktop.org/drm/intel/issues/54
[i915#58]: https://gitlab.freedesktop.org/drm/intel/issues/58
[i915#644]: https://gitlab.freedesktop.org/drm/intel/issues/644
[i915#677]: https://gitlab.freedesktop.org/drm/intel/issues/677
[i915#79]: https://gitlab.freedesktop.org/drm/intel/issues/79
[i915#899]: https://gitlab.freedesktop.org/drm/intel/issues/899
[i915#92]: https://gitlab.freedesktop.org/drm/intel/issues/92
[k.org#198133]: https://bugzilla.kernel.org/show_bug.cgi?id=198133
Participating hosts (10 -> 8)
------------------------------
Missing (2): pig-skl-6260u pig-glk-j5005
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_5506 -> IGTPW_4299
* Piglit: piglit_4509 -> None
CI-20190529: 20190529
CI_DRM_8130: cf47ad003bc75f001bd33caedb28c8ba2e3c3d33 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_4299: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/index.html
IGT_5506: 59fd8a0d01dac58dc6c7d86ef391ed4393ab5aae @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4299/index.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 10 lines · Umesh Nerlige Ramappa
Add tests that verify the configurable poll delay in perf OA.
Lionel Landwerlin (2):
include/drm-uapi: Updatei915_drm.hfor perf OA APIs tests/perf: new tests for parameterized OA buffer pollinginclude/drm-uapi/i915_drm.h | 13 ++++ tests/perf.c | 132 ++++++++++++++++++++++++++---------- 2 files changed, 111 insertions(+), 34 deletions(-)
Just found a few nits, but otherwise it looks good.
That said I wrote those tests so... ;)
-Lionel
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev