Test configurable poll delay in perf OA
cover Test configurable poll delay in perf OA
Add tests that verify the configurable poll delay in perf OA.
Lionel Landwerlin (2):
include/drm-uapi: Update i915_drm.h for perf OA APIs tests/perf: new tests for parameterized OA buffer polling
Umesh Nerlige Ramappa (1):
tools: Allow user to set poll delay in i915 perf recorder
include/drm-uapi/i915_drm.h | 13 +++ tests/perf.c | 136 ++++++++++++++++++++------- tools/i915-perf/i915_perf_recorder.c | 37 +++++++- 3 files changed, 149 insertions(+), 37 deletions(-)
Signature · 6 lines
2.20.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH 1/3 include/drm-uapi: Update i915_drm.h for perf OA APIs
From: Lionel Landwerlin <[email protected]>
Add APIs to configure poll delay in perf OA.
v2: (Umesh)
- Remove interrupt and flush APIs
- Change commit message
--- include/drm-uapi/i915_drm.h | 13 +++++++++++++ 1 file changed, 13 insertions(+)
include/drm-uapi/i915_drm.h +13 -0
@@ -1969,6 +1969,19 @@ enum drm_i915_perf_property_id {*/ DRM_I915_PERF_PROP_HOLD_PREEMPTION , +/** +* This optional parameter specifies the timer interval in nanoseconds +* at which the i915 driver will check the OA buffer for available data. +* Minimum allowed value is 100 microseconds. A default value is used by +* the driver if this parameter is not specified. Note that a large +* value may reduce cpu consumption during OA perf captures, but it +* would also potentially result in OA buffer overwrite as the captures +* reach end of the OA buffer. +* +* This property is available in perf revision 4. +*/ +DRM_I915_PERF_PROP_POLL_OA_DELAY , + DRM_I915_PERF_PROP_MAX /* non-ABI */ };
Signature · 6 lines
2.20.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH 2/3 tests/perf: new tests for parameterized OA buffer polling
In reply to Umesh Nerlige RamappaFrom: Lionel Landwerlin <[email protected]>
2 new tests verifying that the OA buffer is properly checked at the frequency specified by userspace.
v2: (Umesh)
- Capture start_times in test_polling
- Second parameterized test used a 500us hrtimer. Occassionally, this timing does not fall within the duration/100 requirement for the time spent in kernel. Change this value to 2ms to accommodate all platforms.
v3: (Lionel)
- Use NUM_PROPERTIES
--- tests/perf.c | 136 ++++++++++++++++++++++++++++++++++++++------------- 1 file changed, 102 insertions(+), 34 deletions(-)
tests/perf.c +102 -34
@@ -234,6 +234,24 @@ get_oa_format(enum drm_i915_oa_format format)return gen8_oa_formats[format]; } +static char * +pretty_print_oa_period (uint64_t oa_period_ns) +{ +static char result[100 ]; +static const char *units[4 ] = {"ns" ,"us" ,"ms" ,"s" }; +double val = oa_period_ns; +int iter =0 ; + +while (iter < (ARRAY_SIZE (units) -1 ) && + val >=1000.0f ) { + val /=1000.0f ; + iter++; + } + +snprintf (result,sizeof (result),"%.3f%s" , val, units[iter]); +return result; +} +static void __perf_close (int fd) {
@@ -1921,15 +1939,9 @@ get_time(void)* kernelspace. */ static void -test_blocking (void ) +test_blocking (uint64_t requested_oa_period,bool set_kernel_hrtimer,uint64_t kernel_hrtimer) { -/* ~40 milliseconds -* -* Having a period somewhat > sysconf(_SC_CLK_TCK) helps to stop -* scheduling (liable to kick in when we make blocking poll()s/reads) -* from interfering with the test. -*/ -int oa_exponent =max_oa_exponent_for_period_lte (40000000 ); +int oa_exponent =max_oa_exponent_for_period_lte (requested_oa_period);uint64_t oa_period =oa_exponent_to_ns (oa_exponent);uint64_t properties[] = {/* Include OA reports in samples */
@@ -1939,11 +1951,16 @@ test_blocking(void)DRM_I915_PERF_PROP_OA_METRICS_SET , test_set->perf_oa_metrics_set,DRM_I915_PERF_PROP_OA_FORMAT , test_set->perf_oa_format,DRM_I915_PERF_PROP_OA_EXPONENT , oa_exponent, + +/* Kernel configuration (optional) */ + DRM_I915_PERF_PROP_POLL_OA_DELAY, kernel_hrtimer, };struct drm_i915_perf_open_param param = { .flags =I915_PERF_FLAG_FD_CLOEXEC |I915_PERF_FLAG_DISABLED , - .num_properties =sizeof (properties) /16 , + .num_properties = set_kernel_hrtimer ? +NUM_PROPERTIES (properties) : +NUM_PROPERTIES (properties) -1 , .properties_ptr =to_user_pointer (properties), };uint8_t buf[1024 *1024 ];
@@ -1965,7 +1982,7 @@ test_blocking(void)* the knowledge that that the driver uses a 200Hz hrtimer (5ms period) * to check for data and giving some time to read(). */ -int min_iterations = (test_duration_ns / (oa_period +6000000ull )); +int min_iterations = (test_duration_ns / (oa_period + kernel_hrtimer + kernel_hrtimer /5 ));int64_t start, end;int n =0 ;
@@ -1975,9 +1992,10 @@ test_blocking(void)times (&start_times);igt_debug ("tick length = %dns, test duration = %" PRIu64"ns, min iter. = %d," -" estimated max iter. = %d, oa_period = %" PRIu64"ns\n" , +" estimated max iter. = %d, oa_period = %s\n" , (int )tick_ns, test_duration_ns, - min_iterations, max_iterations, oa_period); + min_iterations, max_iterations, +pretty_print_oa_period (oa_period));/* In the loop we perform blocking polls while the HW is sampling at * ~25Hz, with the expectation that we spend most of our time blocked
@@ -2079,15 +2097,9 @@ test_blocking(void) }static void -test_polling (void ) +test_polling (uint64_t requested_oa_period,bool set_kernel_hrtimer,uint64_t kernel_hrtimer) { -/* ~40 milliseconds -* -* Having a period somewhat > sysconf(_SC_CLK_TCK) helps to stop -* scheduling (liable to kick in when we make blocking poll()s/reads) -* from interfering with the test. -*/ -int oa_exponent =max_oa_exponent_for_period_lte (40000000 ); +int oa_exponent =max_oa_exponent_for_period_lte (requested_oa_period);uint64_t oa_period =oa_exponent_to_ns (oa_exponent);uint64_t properties[] = {/* Include OA reports in samples */
@@ -2097,12 +2109,17 @@ test_polling(void)DRM_I915_PERF_PROP_OA_METRICS_SET , test_set->perf_oa_metrics_set,DRM_I915_PERF_PROP_OA_FORMAT , test_set->perf_oa_format,DRM_I915_PERF_PROP_OA_EXPONENT , oa_exponent, + +/* Kernel configuration (optional) */ + DRM_I915_PERF_PROP_POLL_OA_DELAY, kernel_hrtimer, };struct drm_i915_perf_open_param param = { .flags =I915_PERF_FLAG_FD_CLOEXEC |I915_PERF_FLAG_DISABLED |I915_PERF_FLAG_FD_NONBLOCK , - .num_properties =sizeof (properties) /16 , + .num_properties = set_kernel_hrtimer ? +NUM_PROPERTIES (properties) : +NUM_PROPERTIES (properties) -1 , .properties_ptr =to_user_pointer (properties), };uint8_t buf[1024 *1024 ];
@@ -2116,15 +2133,16 @@ test_polling(void)int n_extra_iterations =0 ;/* It's a bit tricky to put a lower limit here, but we expect a -* relatively low latency for seeing reports, while we don't currently -* give any control over this in the api. +* relatively low latency for seeing reports. * -* We assume a maximum latency of 6 millisecond to deliver a POLLIN and -* read() after a new sample is written (46ms per iteration) considering -* the knowledge that that the driver uses a 200Hz hrtimer (5ms period) -* to check for data and giving some time to read(). +* We assume a maximum latency of kernel_hrtimer + some margin +* to deliver a POLLIN and read() after a new sample is +* written (40ms + hrtimer + margin per iteration) considering +* the knowledge that that the driver uses a 200Hz hrtimer +* (5ms period) to check for data and giving some time to +* read(). */ -int min_iterations = (test_duration_ns / (oa_period +6000000ull )); +int min_iterations = (test_duration_ns / (oa_period + (kernel_hrtimer + kernel_hrtimer /5 )));int64_t start, end;int n =0 ;
@@ -2132,8 +2150,9 @@ test_polling(void)times (&start_times); -igt_debug ("tick length = %dns, test duration = %" PRIu64"ns, min iter. = %d, max iter. = %d\n" , - (int )tick_ns, test_duration_ns, +igt_debug ("tick length = %dns, oa period = %s, " +"test duration = %" PRIu64"ns, min iter. = %d, max iter. = %d\n" , + (int )tick_ns,pretty_print_oa_period (oa_period), test_duration_ns, min_iterations, max_iterations);/* In the loop we perform blocking polls while the HW is sampling at
@@ -4502,6 +4521,23 @@ test_sysctl_defaults(void)igt_assert_eq (max_freq,100000 ); } +static int i915_perf_revision (int fd) +{ +drm_i915_getparam_t gp; +int value =1 , ret; + + gp.param =I915_PARAM_PERF_REVISION ; + gp.value = &value; + ret =igt_ioctl (drm_fd,DRM_IOCTL_I915_GETPARAM , &gp); +if (ret ==-1 ) { +/* If the param is missing, consider version 1. */ +igt_assert_eq (errno,EINVAL ); +return 1 ; + } + +return value; +} +igt_main { igt_fixture {
@@ -4584,11 +4620,43 @@ igt_main igt_subtest("enable-disable")test_enable_disable (); - igt_subtest("blocking") -test_blocking (); +igt_describe ("Test blocking read with default hrtimer frequency" ); + igt_subtest("blocking") { +test_blocking (40 *1000 *1000 /* 40ms oa period */ , + false/* set_kernel_hrtimer */ , +5 *1000 *1000 /* default 5ms/200Hz hrtimer */ ); + } + +igt_describe ("Test blocking read with different hrtimer frequencies" ); + igt_subtest("blocking-parameterized") { +igt_require (i915_perf_revision (drm_fd) >=4 ); + +test_blocking (10 *1000 *1000 /* 10ms oa period */ , + true/* set_kernel_hrtimer */ , +40 *1000 *1000 /* default 40ms hrtimer */ ); +test_blocking (500 *1000 /* 500us oa period */ , + true/* set_kernel_hrtimer */ , +2 *1000 *1000 /* default 2ms hrtimer */ ); + } - igt_subtest("polling") -test_polling (); +igt_describe ("Test polled read with default hrtimer frequency" ); + igt_subtest("polling") { +test_polling (40 *1000 *1000 /* 40ms oa period */ , + false/* set_kernel_hrtimer */ , +5 *1000 *1000 /* default 5ms/200Hz hrtimer */ ); + } + +igt_describe ("Test polled read with different hrtimer frequencies" ); + igt_subtest("polling-parameterized") { +igt_require (i915_perf_revision (drm_fd) >=4 ); + +test_polling (10 *1000 *1000 /* 10ms oa period */ , + true/* set_kernel_hrtimer */ , +40 *1000 *1000 /* default 40ms hrtimer */ ); +test_polling (500 *1000 /* 500us oa period */ , + true/* set_kernel_hrtimer */ , +2 *1000 *1000 /* default 2ms hrtimer */ ); + } igt_subtest("short-reads")test_short_reads ();
Signature · 6 lines
2.20.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH 3/3 tools: Allow user to set poll delay in i915 perf recorder
In reply to Umesh Nerlige RamappaAdd poll delay parameter to the i915-perf-recorder tool so that the user can set the frequency of the poll timer that checks for available reports in the OA buffer.
--- tools/i915-perf/i915_perf_recorder.c | 37 +++++++++++++++++++++++++--- 1 file changed, 34 insertions(+), 3 deletions(-)
tools/i915-perf/i915_perf_recorder.c +34 -3
@@ -353,14 +353,31 @@ struct recording_context {const char *command_fifo;int command_fifo_fd; + +uint32_t poll_delay; }; +static int +perf_revision (int drm_fd) +{ +drm_i915_getparam_t gp; +int value =1 ; + + gp.param =I915_PARAM_PERF_REVISION ; + gp.value = &value; +perf_ioctl (drm_fd,DRM_IOCTL_I915_GETPARAM , &gp); + +return value; +} +static int perf_open (struct recording_context *ctx) {uint64_t properties[DRM_I915_PERF_PROP_MAX *2 ];struct drm_i915_perf_open_param param; -int p =0 , stream_fd; +int p =0 , stream_fd, revision; + + revision =perf_revision (ctx->drm_fd); properties[p++] =DRM_I915_PERF_PROP_SAMPLE_OA ; properties[p++] = true;
@@ -374,6 +391,11 @@ perf_open(struct recording_context *ctx) properties[p++] =DRM_I915_PERF_PROP_OA_EXPONENT ; properties[p++] = ctx->oa_exponent; +if (revision >=4 ) { + properties[p++] =DRM_I915_PERF_PROP_POLL_OA_DELAY ; + properties[p++] = ctx->poll_delay; + } +memset (¶m,0 ,sizeof (param)); param.flags =0 ; param.flags |=I915_PERF_FLAG_FD_CLOEXEC |I915_PERF_FLAG_FD_NONBLOCK ;
@@ -720,7 +742,10 @@ usage(const char *name)" (To use with i915-perf-control)\n" " --output, -o <path> Output file (default = i915_perf.record)\n" " --cpu-clock, -k <path> Cpu clock to use for correlations\n" -" Values: boot, mono, mono_raw (default = mono)\n" , +" Values: boot, mono, mono_raw (default = mono)\n" +" --poll-delay -P <value> Polling interval in microseconds used by a timer in the driver to query\n" +" for OA reports periodically\n" +" (default = 5000), Minimum = 100.\n" , name); }
@@ -762,6 +787,7 @@ main(int argc, char *argv[]) {"size", required_argument, 0, 's'}, {"command-fifo", required_argument, 0, 'f'}, {"cpu-clock", required_argument, 0, 'k'}, + {"poll-delay", required_argument, 0, 'P'}, {0, 0, 0, 0} }; const struct {
@@ -788,9 +814,11 @@ main(int argc, char *argv[]) .command_fifo = I915_PERF_RECORD_FIFO_PATH, .command_fifo_fd = -1, + + .poll_delay = 5 * 1000 * 1000, }; -while ((opt =getopt_long (argc, argv,"hc:p:m:Co:s:f:k:" , long_options,NULL )) !=-1 ) { +while ((opt =getopt_long (argc, argv,"hc:p:m:Co:s:f:k:P:" , long_options,NULL )) !=-1 ) {switch (opt) {case 'h' :usage (argv[0 ]);
@@ -832,6 +860,9 @@ main(int argc, char *argv[]) }break ; } +case 'P' : + ctx.poll_delay =MAX (100 ,atoi (optarg)) *1000 ; +break ;default :fprintf (stderr,"Internal error: " "unexpected getopt value: %d\n" , opt);
Signature · 6 lines
2.20.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] [PATCH i-g-t 3/3] tools: Allow user to set poll delay in i915 perf recorder
Quoted 5 lines · Umesh Nerlige Ramappa
Add poll delay parameter to the i915-perf-recorder tool so that the user can set the frequency of the poll timer that checks for available reports in the OA buffer.
Signed-off-by Umesh Nerlige Ramappa <[email protected]>
Couple of nits below.
Either way :
Thanks!
Quoted 9 lines
--- tools/i915-perf/i915_perf_recorder.c | 37 +++++++++++++++++++++++++--- 1 file changed, 34 insertions(+), 3 deletions(-)tools/i915-perf/i915_perf_recorder.c +0
-0
tools/i915-perf/i915_perf_recorder.c struct recording_context { · line 357
Quoted 5 lines
tools/i915-perf/i915_perf_recorder.c +2
-0@@ -353,14 +353,31 @@ struct recording_context {const char *command_fifo;int command_fifo_fd; + +uint32_t poll_delay;
Maybe just use a uint64_t as it's the type used by the kernel interface.
Quoted 73 lines
tools/i915-perf/i915_perf_recorder.c +29
-3}; +static int +perf_revision (int drm_fd) +{ +drm_i915_getparam_t gp; +int value =1 ; + + gp.param =I915_PARAM_PERF_REVISION ; + gp.value = &value; +perf_ioctl (drm_fd,DRM_IOCTL_I915_GETPARAM , &gp); + +return value; +} +static int perf_open (struct recording_context *ctx) {uint64_t properties[DRM_I915_PERF_PROP_MAX *2 ];struct drm_i915_perf_open_param param; -int p =0 , stream_fd; +int p =0 , stream_fd, revision; + + revision =perf_revision (ctx->drm_fd); properties[p++] =DRM_I915_PERF_PROP_SAMPLE_OA ; properties[p++] = true;@@ -374,6 +391,11 @@ perf_open(struct recording_context *ctx) properties[p++] =DRM_I915_PERF_PROP_OA_EXPONENT ; properties[p++] = ctx->oa_exponent; +if (revision >=4 ) { + properties[p++] =DRM_I915_PERF_PROP_POLL_OA_DELAY ; + properties[p++] = ctx->poll_delay; + } +memset (¶m,0 ,sizeof (param)); param.flags =0 ; param.flags |=I915_PERF_FLAG_FD_CLOEXEC |I915_PERF_FLAG_FD_NONBLOCK ;@@ -720,7 +742,10 @@ usage(const char *name)" (To use with i915-perf-control)\n" " --output, -o <path> Output file (default = i915_perf.record)\n" " --cpu-clock, -k <path> Cpu clock to use for correlations\n" -" Values: boot, mono, mono_raw (default = mono)\n" , +" Values: boot, mono, mono_raw (default = mono)\n" +" --poll-delay -P <value> Polling interval in microseconds used by a timer in the driver to query\n" +" for OA reports periodically\n" +" (default = 5000), Minimum = 100.\n" , name); }@@ -762,6 +787,7 @@ main(int argc, char *argv[]) {"size", required_argument, 0, 's'}, {"command-fifo", required_argument, 0, 'f'}, {"cpu-clock", required_argument, 0, 'k'}, + {"poll-delay", required_argument, 0, 'P'}, {0, 0, 0, 0} }; const struct {@@ -788,9 +814,11 @@ main(int argc, char *argv[]) .command_fifo = I915_PERF_RECORD_FIFO_PATH, .command_fifo_fd = -1, + + .poll_delay = 5 * 1000 * 1000, }; -while ((opt =getopt_long (argc, argv,"hc:p:m:Co:s:f:k:" , long_options,NULL )) !=-1 ) { +while ((opt =getopt_long (argc, argv,"hc:p:m:Co:s:f:k:P:" , long_options,NULL )) !=-1 ) {switch (opt) {case 'h' :usage (argv[0 ]);
tools/i915-perf/i915_perf_recorder.c main(int argc, char *argv[]) · line 864
Quoted 5 lines
tools/i915-perf/i915_perf_recorder.c +2
-0@@ -832,6 +860,9 @@ main(int argc, char *argv[]) }break ; } +case 'P' : + ctx.poll_delay =MAX (100 ,atoi (optarg)) *1000 ;
atol() just to be sure?
tools/i915-perf/i915_perf_recorder.c main(int argc, char *argv[]) · line 868
Quoted 4 lines
tools/i915-perf/i915_perf_recorder.c +1
-0+break ;default :fprintf (stderr,"Internal error: " "unexpected getopt value: %d\n" , opt);
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✗ GitLab.Pipeline: warning for Test configurable poll delay in perf OA (rev2)
In reply to Umesh Nerlige Ramappa== Series Details ==
== Series Details ==
Series: Test configurable poll delay in perf OA (rev2)
URL : https://patchwork.freedesktop.org/series/74655/
State : warning
== Summary ==
Did not get list of undocumented tests for this run, something is wrong!
Other than that, pipeline status: FAILED.
see https://gitlab.freedesktop.org/gfx-ci/igt-ci-tags/pipelines/120135 for the overview.
build:tests-debian-meson-mips has failed (https://gitlab.freedesktop.org/gfx-ci/igt-ci-tags/-/jobs/1941150):
Running with gitlab-runner 12.5.0 (577f813d)
on gst-gitlab-htz-runner2 sGiTXgBC
section_start:1584361515:prepare_executor
Using Docker executor with image registry.freedesktop.org/gfx-ci/igt-ci-tags/build-debian-mips:commit-2c9542abda7cdbd05b695c6287974c8f51cc2a55 ...
Authenticating with credentials from job payload (GitLab Registry)
Pulling docker image registry.freedesktop.org/gfx-ci/igt-ci-tags/build-debian-mips:commit-2c9542abda7cdbd05b695c6287974c8f51cc2a55 ...
Using docker image sha256:20ce37ce0dd99e42a1a28192a10ddd453c0dc2ae3056621938b8ec4221e3cf3c for registry.freedesktop.org/gfx-ci/igt-ci-tags/build-debian-mips:commit-2c9542abda7cdbd05b695c6287974c8f51cc2a55 ... section_end:1584361518:prepare_executor
section_start:1584361518:prepare_script
Running on runner-sGiTXgBC-project-3185-concurrent-0 via gst-gitlab-htz-runner2...
section_end:1584361520:prepare_script
section_start:1584361520:get_sources
section_end:1584361520:get_sources
section_start:1584361520:upload_artifacts_on_failure
section_end:1584361522:upload_artifacts_on_failure
ERROR: Job failed (system failure): Error response from daemon: error creating overlay mount to /var/lib/docker/overlay2/945d3c854bf186a8f4d3e9c7ec964f6393595815de03e96745c2b99f42134acf/merged: device or resource busy (executor_docker.go:740:0s)
== Logs ==
For more details see: https://gitlab.freedesktop.org/gfx-ci/igt-ci-tags/pipelines/120135
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.BAT: success for Test configurable poll delay in perf OA (rev2)
In reply to Umesh Nerlige Ramappa== Series Details ==
== Series Details ==
Series: Test configurable poll delay in perf OA (rev2)
URL : https://patchwork.freedesktop.org/series/74655/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_8137 -> IGTPW_4304
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/index.html
Known issues
------------
Here are the changes found in IGTPW_4304 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@i915_selftest@live@gem_contexts:
- fi-cfl-8700k: [PASS][1] -> [INCOMPLETE][2] ([i915#424])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/fi-cfl-8700k/igt@i915_selftest@live@gem_contexts.html
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/fi-cfl-8700k/igt@i915_selftest@live@gem_contexts.html
* igt@i915_selftest@live@hangcheck:
- fi-icl-dsi: [PASS][3] -> [INCOMPLETE][4] ([fdo#108569])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/fi-icl-dsi/igt@i915_selftest@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/fi-icl-dsi/igt@i915_selftest@[email protected]
#### Possible fixes ####
* igt@kms_chamelium@hdmi-hpd-fast:
- fi-icl-u2: [FAIL][5] ([i915#217]) -> [PASS][6]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/fi-icl-u2/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/fi-icl-u2/igt@[email protected]
- fi-kbl-7500u: [FAIL][7] ([i915#323]) -> [PASS][8]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/fi-kbl-7500u/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/fi-kbl-7500u/igt@[email protected]
[fdo#108569]: https://bugs.freedesktop.org/show_bug.cgi?id=108569
[i915#217]: https://gitlab.freedesktop.org/drm/intel/issues/217
[i915#323]: https://gitlab.freedesktop.org/drm/intel/issues/323
[i915#424]: https://gitlab.freedesktop.org/drm/intel/issues/424
Participating hosts (48 -> 44)
------------------------------
Additional (1): fi-tgl-dsi
Missing (5): fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-byt-clapper fi-bdw-samus
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_5510 -> IGTPW_4304
CI-20190529: 20190529
CI_DRM_8137: 5786b5e77cc17a1b494b9bdf3c3f29eedc2e2e7d @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_4304: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/index.html
IGT_5510: e100092d50105463f58db531fa953c70cc58bb10 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
== Testlist changes ==
+igt@perf@blocking-parameterized
+igt@perf@polling-parameterized
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/index.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✗ Fi.CI.IGT: failure for Test configurable poll delay in perf OA (rev2)
In reply to Umesh Nerlige Ramappa== Series Details ==
== Series Details ==
Series: Test configurable poll delay in perf OA (rev2)
URL : https://patchwork.freedesktop.org/series/74655/
State : failure
== Summary ==
CI Bug Log - changes from CI_DRM_8137_full -> IGTPW_4304_full
====================================================
Summary
-------
**FAILURE**
Serious unknown changes coming with IGTPW_4304_full absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in IGTPW_4304_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/index.html
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in IGTPW_4304_full:
### IGT changes ###
#### Possible regressions ####
* igt@gem_ctx_shared@single-timeline:
- shard-snb: NOTRUN -> [FAIL][1]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-snb2/igt@[email protected]
- shard-hsw: NOTRUN -> [FAIL][2]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-hsw2/igt@[email protected]
* {igt@perf@blocking-parameterized} (NEW):
- shard-iclb: NOTRUN -> [SKIP][3] +1 similar issue
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb1/igt@[email protected]
* {igt@perf@polling-parameterized} (NEW):
- shard-tglb: NOTRUN -> [SKIP][4] +1 similar issue
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-tglb7/igt@[email protected]
* igt@perf_pmu@busy-no-semaphores-vcs0:
- shard-apl: [PASS][5] -> [FAIL][6]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-apl4/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-apl4/igt@[email protected]
New tests
---------
New tests have been introduced between CI_DRM_8137_full and IGTPW_4304_full:
### New IGT tests (12) ###
* igt@perf@blocking-parameterized:
- Statuses : 7 skip(s)
- Exec time: [0.0] s
* igt@perf@polling-parameterized:
- Statuses : 7 skip(s)
- Exec time: [0.0] s
* igt@sysfs_heartbeat_interval@idempotent:
- Statuses :
- Exec time: [None] s
* igt@sysfs_heartbeat_interval@invalid:
- Statuses :
- Exec time: [None] s
* igt@sysfs_heartbeat_interval@nopreempt:
- Statuses :
- Exec time: [None] s
* igt@sysfs_heartbeat_interval@off:
- Statuses :
- Exec time: [None] s
* igt@sysfs_heartbeat_interval@precise:
- Statuses :
- Exec time: [None] s
* igt@sysfs_preempt_timeout@idempotent:
- Statuses :
- Exec time: [None] s
* igt@sysfs_preempt_timeout@invalid:
- Statuses :
- Exec time: [None] s
* igt@sysfs_timeslice_duration@duration:
- Statuses :
- Exec time: [None] s
* igt@sysfs_timeslice_duration@idempotent:
- Statuses :
- Exec time: [None] s
* igt@sysfs_timeslice_duration@timeout:
- Statuses :
- Exec time: [None] s
Known issues
------------
Here are the changes found in IGTPW_4304_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_ctx_persistence@close-replace-race:
- shard-kbl: [PASS][7] -> [INCOMPLETE][8] ([i915#1402])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-kbl6/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-kbl2/igt@[email protected]
- shard-glk: [PASS][9] -> [INCOMPLETE][10] ([i915#1402] / [i915#58] / [k.org#198133])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-glk3/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-glk5/igt@[email protected]
* igt@gem_ctx_shared@exec-single-timeline-bsd:
- shard-iclb: [PASS][11] -> [SKIP][12] ([fdo#110841])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb5/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb1/igt@[email protected]
* igt@gem_exec_schedule@implicit-both-bsd1:
- shard-iclb: [PASS][13] -> [SKIP][14] ([fdo#109276] / [i915#677])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb4/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb6/igt@[email protected]
* igt@gem_exec_schedule@pi-userfault-bsd:
- shard-iclb: [PASS][15] -> [SKIP][16] ([i915#677])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb7/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb2/igt@[email protected]
* igt@gem_exec_schedule@preempt-other-chain-bsd:
- shard-iclb: [PASS][17] -> [SKIP][18] ([fdo#112146]) +3 similar issues
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb6/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb2/igt@[email protected]
* igt@gem_userptr_blits@dmabuf-unsync:
- shard-snb: [PASS][19] -> [DMESG-WARN][20] ([fdo#111870] / [i915#478])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-snb6/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-snb5/igt@[email protected]
* igt@gem_workarounds@suspend-resume-fd:
- shard-apl: [PASS][21] -> [DMESG-WARN][22] ([i915#180])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-apl6/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-apl6/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-indfb-plflip-blt:
- shard-snb: [PASS][23] -> [SKIP][24] ([fdo#109271]) +1 similar issue
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-snb5/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-snb6/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-indfb-msflip-blt:
- shard-glk: [PASS][25] -> [FAIL][26] ([i915#49])
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-glk1/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-glk2/igt@[email protected]
* igt@kms_plane@plane-panning-bottom-right-suspend-pipe-c-planes:
- shard-kbl: [PASS][27] -> [DMESG-WARN][28] ([i915#180]) +2 similar issues
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-kbl4/igt@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-kbl2/igt@[email protected]
* igt@kms_plane_lowres@pipe-a-tiling-x:
- shard-glk: [PASS][29] -> [FAIL][30] ([i915#899])
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-glk6/igt@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-glk3/igt@[email protected]
* igt@kms_psr@psr2_sprite_plane_move:
- shard-iclb: [PASS][31] -> [SKIP][32] ([fdo#109441]) +2 similar issues
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb2/igt@kms_psr@psr2_sprite_plane_move.html
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb4/igt@kms_psr@psr2_sprite_plane_move.html
* igt@kms_setmode@basic:
- shard-glk: [PASS][33] -> [FAIL][34] ([i915#31])
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-glk2/igt@[email protected]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-glk1/igt@[email protected]
- shard-kbl: [PASS][35] -> [FAIL][36] ([i915#31])
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-kbl7/igt@[email protected]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-kbl6/igt@[email protected]
* igt@kms_vblank@pipe-d-ts-continuation-dpms-rpm:
- shard-tglb: [PASS][37] -> [SKIP][38] ([fdo#112015])
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-tglb8/igt@[email protected]
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-tglb7/igt@[email protected]
* igt@perf_pmu@init-busy-vcs1:
- shard-iclb: [PASS][39] -> [SKIP][40] ([fdo#112080]) +6 similar issues
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb1/igt@[email protected]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb5/igt@[email protected]
* igt@prime_vgem@fence-wait-bsd2:
- shard-iclb: [PASS][41] -> [SKIP][42] ([fdo#109276]) +16 similar issues
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb1/igt@[email protected]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb3/igt@[email protected]
#### Possible fixes ####
* igt@gem_ctx_isolation@rcs0-s3:
- shard-snb: [FAIL][43] -> [PASS][44] +1 similar issue
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-snb4/igt@[email protected]
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-snb2/igt@[email protected]
* igt@gem_ctx_isolation@vcs1-dirty-create:
- shard-iclb: [SKIP][45] ([fdo#112080]) -> [PASS][46] +11 similar issues
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb6/igt@[email protected]
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb4/igt@[email protected]
* igt@gem_ctx_persistence@close-replace-race:
- shard-tglb: [INCOMPLETE][47] ([i915#1402]) -> [PASS][48]
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-tglb2/igt@[email protected]
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-tglb6/igt@[email protected]
- shard-apl: [INCOMPLETE][49] ([fdo#103927] / [i915#1402]) -> [PASS][50]
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-apl1/igt@[email protected]
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-apl2/igt@[email protected]
* igt@gem_exec_balancer@smoke:
- shard-iclb: [SKIP][51] ([fdo#110854]) -> [PASS][52]
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb8/igt@[email protected]
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb1/igt@[email protected]
* igt@gem_exec_parallel@bcs0-fds:
- shard-apl: [FAIL][53] -> [PASS][54]
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-apl6/igt@[email protected]
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-apl8/igt@[email protected]
- shard-iclb: [FAIL][55] -> [PASS][56]
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb2/igt@[email protected]
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb1/igt@[email protected]
- shard-tglb: [FAIL][57] -> [PASS][58]
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-tglb3/igt@[email protected]
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-tglb1/igt@[email protected]
- shard-glk: [FAIL][59] -> [PASS][60]
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-glk8/igt@[email protected]
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-glk9/igt@[email protected]
* igt@gem_exec_schedule@implicit-read-write-bsd1:
- shard-iclb: [SKIP][61] ([fdo#109276] / [i915#677]) -> [PASS][62] +2 similar issues
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb5/igt@[email protected]
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb2/igt@[email protected]
* igt@gem_exec_schedule@pi-distinct-iova-bsd:
- shard-iclb: [SKIP][63] ([i915#677]) -> [PASS][64] +1 similar issue
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb1/igt@[email protected]
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb3/igt@[email protected]
* igt@gem_exec_schedule@preempt-contexts-bsd2:
- shard-iclb: [SKIP][65] ([fdo#109276]) -> [PASS][66] +17 similar issues
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb8/igt@[email protected]
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb1/igt@[email protected]
* igt@gem_exec_schedule@preempt-hang-render:
- shard-apl: [SKIP][67] ([fdo#109271]) -> [PASS][68]
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-apl6/igt@[email protected]
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-apl8/igt@[email protected]
- shard-glk: [SKIP][69] ([fdo#109271]) -> [PASS][70] +1 similar issue
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-glk8/igt@[email protected]
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-glk1/igt@[email protected]
- shard-iclb: [SKIP][71] -> [PASS][72]
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb2/igt@[email protected]
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb4/igt@[email protected]
- shard-tglb: [SKIP][73] -> [PASS][74]
[73]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-tglb3/igt@[email protected]
[74]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-tglb3/igt@[email protected]
- shard-kbl: [SKIP][75] ([fdo#109271]) -> [PASS][76]
[75]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-kbl7/igt@[email protected]
[76]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-kbl3/igt@[email protected]
* igt@gem_exec_schedule@reorder-wide-bsd:
- shard-iclb: [SKIP][77] ([fdo#112146]) -> [PASS][78] +4 similar issues
[77]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb2/igt@[email protected]
[78]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb8/igt@[email protected]
* igt@gem_userptr_blits@sync-unmap-after-close:
- shard-snb: [DMESG-WARN][79] ([fdo#111870] / [i915#478]) -> [PASS][80]
[79]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-snb5/igt@[email protected]
[80]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-snb4/igt@[email protected]
* igt@gem_workarounds@suspend-resume-fd:
- shard-kbl: [DMESG-WARN][81] ([i915#180]) -> [PASS][82] +2 similar issues
[81]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-kbl2/igt@[email protected]
[82]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-kbl4/igt@[email protected]
* igt@i915_pm_dc@dc5-dpms:
- shard-iclb: [FAIL][83] ([i915#447]) -> [PASS][84]
[83]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb3/igt@[email protected]
[84]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb1/igt@[email protected]
* igt@i915_pm_rpm@system-suspend-devices:
- shard-iclb: [SKIP][85] ([i915#1316]) -> [PASS][86]
[85]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb1/igt@[email protected]
[86]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb6/igt@[email protected]
- shard-hsw: [SKIP][87] ([fdo#109271]) -> [PASS][88]
[87]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-hsw4/igt@[email protected]
[88]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-hsw7/igt@[email protected]
- shard-tglb: [SKIP][89] ([i915#1316]) -> [PASS][90]
[89]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-tglb6/igt@[email protected]
[90]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-tglb5/igt@[email protected]
* igt@i915_pm_rps@waitboost:
- shard-tglb: [FAIL][91] ([i915#413]) -> [PASS][92]
[91]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-tglb7/igt@[email protected]
[92]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-tglb6/igt@[email protected]
* igt@kms_cursor_legacy@2x-long-flip-vs-cursor-legacy:
- shard-glk: [FAIL][93] ([i915#72]) -> [PASS][94]
[93]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-glk1/igt@[email protected]
[94]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-glk4/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-render:
- shard-kbl: [FAIL][95] ([i915#49]) -> [PASS][96]
[95]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-kbl2/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-render.html
[96]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-kbl7/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-render.html
- shard-glk: [FAIL][97] ([i915#49]) -> [PASS][98]
[97]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-glk2/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-render.html
[98]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-glk9/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-render.html
- shard-apl: [FAIL][99] ([i915#49]) -> [PASS][100]
[99]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-apl6/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-render.html
[100]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-apl4/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-render.html
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-pwrite:
- shard-snb: [DMESG-WARN][101] ([i915#478]) -> [PASS][102]
[101]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-snb6/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-pwrite.html
[102]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-snb4/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-pwrite.html
* igt@kms_psr@psr2_no_drrs:
- shard-iclb: [SKIP][103] ([fdo#109441]) -> [PASS][104] +1 similar issue
[103]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-iclb8/igt@kms_psr@psr2_no_drrs.html
[104]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-iclb2/igt@kms_psr@psr2_no_drrs.html
* igt@kms_vblank@pipe-d-ts-continuation-modeset-hang:
- shard-tglb: [SKIP][105] ([fdo#112015]) -> [PASS][106]
[105]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-tglb3/igt@[email protected]
[106]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-tglb3/igt@[email protected]
* igt@perf_pmu@most-busy-idle-check-all-bcs0:
- shard-hsw: [FAIL][107] -> [PASS][108] +1 similar issue
[107]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-hsw5/igt@[email protected]
[108]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-hsw7/igt@[email protected]
#### Warnings ####
* igt@gem_userptr_blits@map-fixed-invalidate-busy@gtt:
- shard-hsw: [DMESG-WARN][109] ([fdo#110789] / [i915#478]) -> [DMESG-WARN][110] ([i915#478])
[109]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-hsw5/igt@gem_userptr_blits@[email protected]
[110]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-hsw2/igt@gem_userptr_blits@[email protected]
* igt@i915_pm_dc@dc6-dpms:
- shard-tglb: [SKIP][111] ([i915#468]) -> [FAIL][112] ([i915#454])
[111]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-tglb2/igt@[email protected]
[112]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-tglb1/igt@[email protected]
* igt@runner@aborted:
- shard-hsw: ([FAIL][113], [FAIL][114], [FAIL][115], [FAIL][116], [FAIL][117], [FAIL][118], [FAIL][119], [FAIL][120]) ([fdo#111870]) -> ([FAIL][121], [FAIL][122], [FAIL][123], [FAIL][124], [FAIL][125], [FAIL][126], [FAIL][127]) ([fdo#109271] / [fdo#111870])
[113]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-hsw6/igt@[email protected]
[114]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-hsw7/igt@[email protected]
[115]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-hsw6/igt@[email protected]
[116]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-hsw2/igt@[email protected]
[117]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-hsw1/igt@[email protected]
[118]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-hsw5/igt@[email protected]
[119]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-hsw5/igt@[email protected]
[120]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-hsw2/igt@[email protected]
[121]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-hsw6/igt@[email protected]
[122]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-hsw2/igt@[email protected]
[123]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-hsw5/igt@[email protected]
[124]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-hsw2/igt@[email protected]
[125]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-hsw7/igt@[email protected]
[126]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-hsw1/igt@[email protected]
[127]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-hsw4/igt@[email protected]
- shard-kbl: [FAIL][128] ([i915#92]) -> ([FAIL][129], [FAIL][130]) ([i915#1389] / [i915#1402] / [i915#92])
[128]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-kbl3/igt@[email protected]
[129]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-kbl7/igt@[email protected]
[130]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-kbl2/igt@[email protected]
- shard-apl: ([FAIL][131], [FAIL][132]) ([fdo#103927] / [i915#1402]) -> [FAIL][133] ([fdo#103927])
[131]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-apl3/igt@[email protected]
[132]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-apl1/igt@[email protected]
[133]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-apl4/igt@[email protected]
- shard-snb: ([FAIL][134], [FAIL][135], [FAIL][136], [FAIL][137], [FAIL][138], [FAIL][139], [FAIL][140], [FAIL][141], [FAIL][142]) ([fdo#111870] / [i915#1077] / [i915#698]) -> ([FAIL][143], [FAIL][144], [FAIL][145], [FAIL][146], [FAIL][147], [FAIL][148], [FAIL][149], [FAIL][150]) ([fdo#111870] / [i915#1077])
[134]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-snb4/igt@[email protected]
[135]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-snb5/igt@[email protected]
[136]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-snb4/igt@[email protected]
[137]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-snb4/igt@[email protected]
[138]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-snb4/igt@[email protected]
[139]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-snb5/igt@[email protected]
[140]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-snb2/igt@[email protected]
[141]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-snb5/igt@[email protected]
[142]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8137/shard-snb6/igt@[email protected]
[143]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-snb6/igt@[email protected]
[144]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-snb5/igt@[email protected]
[145]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-snb4/igt@[email protected]
[146]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-snb5/igt@[email protected]
[147]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-snb4/igt@[email protected]
[148]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-snb2/igt@[email protected]
[149]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-snb6/igt@[email protected]
[150]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/shard-snb4/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109276]: https://bugs.freedesktop.org/show_bug.cgi?id=109276
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[fdo#110789]: https://bugs.freedesktop.org/show_bug.cgi?id=110789
[fdo#110841]: https://bugs.freedesktop.org/show_bug.cgi?id=110841
[fdo#110854]: https://bugs.freedesktop.org/show_bug.cgi?id=110854
[fdo#111870]: https://bugs.freedesktop.org/show_bug.cgi?id=111870
[fdo#112015]: https://bugs.freedesktop.org/show_bug.cgi?id=112015
[fdo#112080]: https://bugs.freedesktop.org/show_bug.cgi?id=112080
[fdo#112146]: https://bugs.freedesktop.org/show_bug.cgi?id=112146
[i915#1077]: https://gitlab.freedesktop.org/drm/intel/issues/1077
[i915#1316]: https://gitlab.freedesktop.org/drm/intel/issues/1316
[i915#1389]: https://gitlab.freedesktop.org/drm/intel/issues/1389
[i915#1402]: https://gitlab.freedesktop.org/drm/intel/issues/1402
[i915#180]: https://gitlab.freedesktop.org/drm/intel/issues/180
[i915#31]: https://gitlab.freedesktop.org/drm/intel/issues/31
[i915#413]: https://gitlab.freedesktop.org/drm/intel/issues/413
[i915#447]: https://gitlab.freedesktop.org/drm/intel/issues/447
[i915#454]: https://gitlab.freedesktop.org/drm/intel/issues/454
[i915#468]: https://gitlab.freedesktop.org/drm/intel/issues/468
[i915#478]: https://gitlab.freedesktop.org/drm/intel/issues/478
[i915#49]: https://gitlab.freedesktop.org/drm/intel/issues/49
[i915#58]: https://gitlab.freedesktop.org/drm/intel/issues/58
[i915#677]: https://gitlab.freedesktop.org/drm/intel/issues/677
[i915#698]: https://gitlab.freedesktop.org/drm/intel/issues/698
[i915#72]: https://gitlab.freedesktop.org/drm/intel/issues/72
[i915#899]: https://gitlab.freedesktop.org/drm/intel/issues/899
[i915#92]: https://gitlab.freedesktop.org/drm/intel/issues/92
[k.org#198133]: https://bugzilla.kernel.org/show_bug.cgi?id=198133
Participating hosts (10 -> 8)
------------------------------
Missing (2): pig-skl-6260u pig-glk-j5005
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_5510 -> IGTPW_4304
* Piglit: piglit_4509 -> None
CI-20190529: 20190529
CI_DRM_8137: 5786b5e77cc17a1b494b9bdf3c3f29eedc2e2e7d @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_4304: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/index.html
IGT_5510: e100092d50105463f58db531fa953c70cc58bb10 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4304/index.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev