Skip to contentSkip to conversation

iommu/vt-d: Populate debugfs if IOMMUs are detected

PATCH In review Lu Baolu 2 participants 2 messages Mar 14, 2020 IOMMU

lore
Share & tools
lore

Lu Baolu

author
#0 lore raw

PATCH v2 1/1 iommu/vt-d: Populate debugfs if IOMMUs are detected

From: Megha Dey <[email protected]>

Currently, the intel iommu debugfs directory(/sys/kernel/debug/iommu/intel) gets populated only when DMA remapping is enabled (dmar_disabled = 0) irrespective of whether interrupt remapping is enabled or not.

Instead, populate the intel iommu debugfs directory if any IOMMUs are detected.

Cc Dan Carpenter <[email protected]>
Fixes ee2636b8670b1 ("iommu/vt-d: Enable base Intel IOMMU debugfs support")
---
 drivers/iommu/intel-iommu-debugfs.c | 11 ++++++++++-
 drivers/iommu/intel-iommu.c         |  4 +++-
 2 files changed, 13 insertions(+), 2 deletions(-)

Change log:
v1->v2:
- Fix lock issue reported by Dan Carpenter <[email protected]>

drivers/iommu/intel-iommu-debugfs.c +10 -1
index 0a7791934a16..3eb1fe240fb0 100644
@@ -282,9 +282,16 @@ static int dmar_translation_struct_show(struct seq_file *m, void *unused)
 {
 	struct dmar_drhd_unit *drhd;
 	struct intel_iommu *iommu;
+	u32 sts;
 
 	rcu_read_lock();
 	for_each_active_iommu(iommu, drhd) {
+		sts = dmar_readl(iommu->reg + DMAR_GSTS_REG);
+		if (!(sts & DMA_GSTS_TES)) {
+			seq_printf(m, "DMA Remapping is not enabled on %s\n",
+				   iommu->name);
+			continue;
+		}
 		root_tbl_walk(m, iommu);
 		seq_putc(m, '\n');
 	}
@@ -425,6 +432,7 @@ static int ir_translation_struct_show(struct seq_file *m, void *unused)
 	struct dmar_drhd_unit *drhd;
 	struct intel_iommu *iommu;
 	u64 irta;
+	u32 sts;
 
 	rcu_read_lock();
 	for_each_active_iommu(iommu, drhd) {
@@ -434,7 +442,8 @@ static int ir_translation_struct_show(struct seq_file *m, void *unused)
 		seq_printf(m, "Remapped Interrupt supported on IOMMU: %s\n",
 			   iommu->name);
 
-		if (iommu->ir_table) {
+		sts = dmar_readl(iommu->reg + DMAR_GSTS_REG);
+		if (iommu->ir_table && (sts & DMA_GSTS_IRES)) {
 			irta = virt_to_phys(iommu->ir_table->base);
 			seq_printf(m, " IR table address:%llx\n", irta);
 			ir_tbl_remap_entry_show(m, iommu);
drivers/iommu/intel-iommu.c +3 -1
index 693380355dea..ec122b8a746b 100644
@@ -5130,6 +5130,9 @@ int __init intel_iommu_init(void)
 
 	down_write(&dmar_global_lock);
 
+	if (!no_iommu)
+		intel_iommu_debugfs_init();
+
 	if (no_iommu || dmar_disabled) {
 		/*
 		 * We exit the function here to ensure IOMMU's remapping and
@@ -5225,7 +5228,6 @@ int __init intel_iommu_init(void)
 	pr_info("Intel(R) Virtualization Technology for Directed I/O\n");
 
 	intel_iommu_enabled = 1;
-	intel_iommu_debugfs_init();
 
 	return 0;
 
Signature · 6 lines
2.17.1

_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
maintainer
#1 lore raw
Quoted 9 lines · Lu Baolu

From: Megha Dey <[email protected]>

Currently, the intel iommu debugfs directory(/sys/kernel/debug/iommu/intel) gets populated only when DMA remapping is enabled (dmar_disabled = 0) irrespective of whether interrupt remapping is enabled or not.

Instead, populate the intel iommu debugfs directory if any IOMMUs are detected.

Quoted 8 lines
Cc Dan Carpenter <[email protected]>
Fixes ee2636b8670b1 ("iommu/vt-d: Enable base Intel IOMMU debugfs support")
---
 drivers/iommu/intel-iommu-debugfs.c | 11 ++++++++++-
 drivers/iommu/intel-iommu.c         |  4 +++-
 2 files changed, 13 insertions(+), 2 deletions(-)

Applied, thanks.
_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu