ARM: omap2plus_defconfig: Enable ext4 security for setcap
Subsystems (2)
Tony Lindgren
maintainerPATCH 1/7 ARM: omap2plus_defconfig: Enable ext4 security for setcap
--- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm/configs/omap2plus_defconfig +1 -0
@@ -514,6 +514,7 @@ CONFIG_TI_PIPE3=y CONFIG_TWL4030_USB=m CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y +CONFIG_EXT4_FS_SECURITY=y CONFIG_FANOTIFY=y CONFIG_QUOTA=y CONFIG_QFMT_V2=y
Signature · 6 lines
2.25.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Tony Lindgren
maintainerPATCH 2/7 ARM: omap2plus_defconfig: Enable simple-pm-bus
We can use simple-pm-bus instead of simple-bus, let's enable it to allow configuring it in dts files for using things like genpd.
--- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm/configs/omap2plus_defconfig +1 -0
@@ -130,6 +130,7 @@ CONFIG_PCI_EPF_TEST=m CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_OMAP_OCP2SCP=y +CONFIG_SIMPLE_PM_BUS=y CONFIG_CONNECTOR=m CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y
Signature · 6 lines
2.25.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Tony Lindgren
maintainerPATCH 3/7 ARM: omap2plus_defconfig: Enable zram as loadable modules
In reply to Tony LindgrenEnable zram as loadable modules. This allows mounting some part of memory as swap on low memory devices.
--- arch/arm/configs/omap2plus_defconfig | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm/configs/omap2plus_defconfig +4 -0
@@ -78,6 +78,8 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_PARTITION_ADVANCED=y CONFIG_BINFMT_MISC=y CONFIG_CMA=y +CONFIG_ZSMALLOC=m +CONFIG_PGTABLE_MAPPING=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y
@@ -150,6 +152,8 @@ CONFIG_MTD_NAND_OMAP2=y CONFIG_MTD_NAND_OMAP_BCH=y CONFIG_MTD_SPI_NOR=m CONFIG_MTD_UBI=y +CONFIG_ZRAM=m +CONFIG_ZRAM_WRITEBACK=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384
Signature · 6 lines
2.25.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Tony Lindgren
maintainerPATCH 4/7 ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
In reply to Tony LindgrenEnable more droid4 devices as loadable modules:
- We have an isl29028 proximity sensor
- Battery has an EEPROM that can be read with w1_ds250x
--- arch/arm/configs/omap2plus_defconfig | 2 ++ 1 file changed, 2 insertions(+)
arch/arm/configs/omap2plus_defconfig +2 -0
@@ -283,6 +283,7 @@ CONFIG_GPIO_PALMAS=y CONFIG_GPIO_TWL4030=y CONFIG_W1=m CONFIG_HDQ_MASTER_OMAP=m +CONFIG_W1_SLAVE_DS250X=m CONFIG_POWER_AVS=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y
@@ -504,6 +505,7 @@ CONFIG_IIO_SW_TRIGGER=m CONFIG_IIO_ST_ACCEL_3AXIS=m CONFIG_CPCAP_ADC=m CONFIG_TI_AM335X_ADC=m +CONFIG_SENSORS_ISL29028=m CONFIG_BMP280=m CONFIG_PWM=y CONFIG_PWM_OMAP_DMTIMER=m
Signature · 6 lines
2.25.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Tony Lindgren
maintainerPATCH 5/7 ARM: omap2plus_defconfig: Enable McPDM optional PMIC clock as modules
In reply to Tony LindgrenThe McPDM module is only usable on hardware where it's module clock is wired to the PMIC. Let's enable the optional PMIC module clocks for this so boards can use McPDM.
--- arch/arm/configs/omap2plus_defconfig | 2 ++ 1 file changed, 2 insertions(+)
arch/arm/configs/omap2plus_defconfig +2 -0
@@ -488,6 +488,8 @@ CONFIG_RTC_DRV_PALMAS=m CONFIG_RTC_DRV_OMAP=m CONFIG_RTC_DRV_CPCAP=m CONFIG_DMADEVICES=y +CONFIG_CLK_TWL6040=m +CONFIG_COMMON_CLK_PALMAS=m CONFIG_OMAP_IOMMU=y CONFIG_REMOTEPROC=y CONFIG_OMAP_REMOTEPROC=m
Signature · 6 lines
2.25.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Tony Lindgren
maintainerPATCH 6/7 ARM: omap2plus_defconfig: Enable ina2xx_adc as a loadable module
In reply to Tony LindgrenSome devices have ina2xx_adc on i2c for measuring power consumption and can nowadays just read the output via IIO.
--- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm/configs/omap2plus_defconfig +1 -0
@@ -506,6 +506,7 @@ CONFIG_IIO_SW_DEVICE=m CONFIG_IIO_SW_TRIGGER=m CONFIG_IIO_ST_ACCEL_3AXIS=m CONFIG_CPCAP_ADC=m +CONFIG_INA2XX_ADC=m CONFIG_TI_AM335X_ADC=m CONFIG_SENSORS_ISL29028=m CONFIG_BMP280=m
Signature · 6 lines
2.25.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Tony Lindgren
maintainerPATCH 7/7 ARM: omap2plus_defconfig: Update for moved and dropped options
In reply to Tony LindgrenLooks like CONFIG_MTD_M25P80 no longer exists and the others just move around the existing options. This makes it easier to create patches against omap2plus_defconfig.
--- arch/arm/configs/omap2plus_defconfig | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
arch/arm/configs/omap2plus_defconfig +3 -4
@@ -142,7 +142,6 @@ CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_M25P80=m CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_VERIFY_WRITE=y CONFIG_MTD_ONENAND_OMAP2=y
@@ -191,10 +190,10 @@ CONFIG_TI_CPSW_SWITCHDEV=y CONFIG_TI_CPTS=y # CONFIG_NET_VENDOR_VIA is not set # CONFIG_NET_VENDOR_WIZNET is not set -CONFIG_AT803X_PHY=y CONFIG_DP83848_PHY=y CONFIG_DP83867_PHY=y CONFIG_MICREL_PHY=y +CONFIG_AT803X_PHY=y CONFIG_SMSC_PHY=y CONFIG_PPP=m CONFIG_PPP_BSDCOMP=m
@@ -363,13 +362,13 @@ CONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV=m CONFIG_DRM_OMAP_PANEL_DSI_CM=m CONFIG_DRM_TILCDC=m CONFIG_DRM_PANEL_SIMPLE=m -CONFIG_DRM_TI_TFP410=m CONFIG_DRM_PANEL_LG_LB035Q02=m CONFIG_DRM_PANEL_NEC_NL8048HL11=m CONFIG_DRM_PANEL_SHARP_LS037V7DW01=m CONFIG_DRM_PANEL_SONY_ACX565AKM=m CONFIG_DRM_PANEL_TPO_TD028TTEC1=m CONFIG_DRM_PANEL_TPO_TD043MTEA1=m +CONFIG_DRM_TI_TFP410=m CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y
@@ -563,10 +562,10 @@ CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_PRINTK_TIME=y +# CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y CONFIG_DEBUG_INFO_SPLIT=y CONFIG_DEBUG_INFO_DWARF4=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_SCHEDSTATS=y -# CONFIG_DEBUG_BUGVERBOSE is not set
Signature · 6 lines
2.25.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel