Skip to contentSkip to conversation

scsi: Use scnprintf() for avoiding potential buffer overflow

PATCH Applied Takashi Iwai 2 participants 10 messages Mar 15, 2020 – Mar 17, 2020

Subsystems (7)
lore
Share & tools
lore
#0 lore raw

v2 cover scsi: Use scnprintf() for avoiding potential buffer overflow

Hi,

here is a respin of trivial patch series just to convert suspicious snprintf() usages with the more safer one, scnprintf().

v1->v2: Align the remaining lines to the open parenthesis

Takashi

===

Takashi Iwai (8):
scsi: aacraid: Use scnprintf() for avoiding potential buffer overflow
scsi: be2iscsi: Use scnprintf() for avoiding potential buffer overflow
scsi: fnic: Use scnprintf() for avoiding potential buffer overflow
scsi: gdth: Use scnprintf() for avoiding potential buffer overflow
scsi: ipr: Use scnprintf() for avoiding potential buffer overflow
scsi: megaraid_sas: Use scnprintf() for avoiding potential buffer
overflow
scsi: core: Use scnprintf() for avoiding potential buffer overflow
scsi: smartpqi: Use scnprintf() for avoiding potential buffer overflow

 drivers/scsi/aacraid/linit.c              | 17 ++++-----
 drivers/scsi/be2iscsi/be_mgmt.c           | 20 +++++------
 drivers/scsi/fnic/fnic_trace.c            | 58 +++++++++++++++----------------
 drivers/scsi/gdth_proc.c                  |  2 +-
 drivers/scsi/ipr.c                        |  6 ++--
 drivers/scsi/megaraid/megaraid_sas_base.c |  7 ++--
 drivers/scsi/scsi_sysfs.c                 | 10 +++---
 drivers/scsi/smartpqi/smartpqi_init.c     | 22 ++++++------
 8 files changed, 72 insertions(+), 70 deletions(-)
Signature · 1 line
2.16.4
#1 lore raw

PATCH v2 1/8 scsi: aacraid: Use scnprintf() for avoiding potential buffer overflow

Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf().

Cc "James E . J . Bottomley" <[email protected]>
Cc "Martin K . Petersen" <[email protected]>
Cc Adaptec OEM Raid Solutions <[email protected]>

---
v1->v2: Align the remaining lines to the open parenthesis

 drivers/scsi/aacraid/linit.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)
drivers/scsi/aacraid/linit.c +9 -8
index b1d133de29ab..8b583eec25b5 100644
@@ -1287,20 +1287,21 @@ static ssize_t aac_show_flags(struct device *cdev,
 	if (nblank(dprintk(x)))
 		len = snprintf(buf, PAGE_SIZE, "dprintk\n");
 #ifdef AAC_DETAILED_STATUS_INFO
-	len += snprintf(buf + len, PAGE_SIZE - len,
-			"AAC_DETAILED_STATUS_INFO\n");
+	len += scnprintf(buf + len, PAGE_SIZE - len,
+			 "AAC_DETAILED_STATUS_INFO\n");
 #endif
 	if (dev->raw_io_interface && dev->raw_io_64)
-		len += snprintf(buf + len, PAGE_SIZE - len,
-				"SAI_READ_CAPACITY_16\n");
+		len += scnprintf(buf + len, PAGE_SIZE - len,
+				 "SAI_READ_CAPACITY_16\n");
 	if (dev->jbod)
-		len += snprintf(buf + len, PAGE_SIZE - len, "SUPPORTED_JBOD\n");
+		len += scnprintf(buf + len, PAGE_SIZE - len,
+				 "SUPPORTED_JBOD\n");
 	if (dev->supplement_adapter_info.supported_options2 &
 		AAC_OPTION_POWER_MANAGEMENT)
-		len += snprintf(buf + len, PAGE_SIZE - len,
-				"SUPPORTED_POWER_MANAGEMENT\n");
+		len += scnprintf(buf + len, PAGE_SIZE - len,
+				 "SUPPORTED_POWER_MANAGEMENT\n");
 	if (dev->msi)
-		len += snprintf(buf + len, PAGE_SIZE - len, "PCI_HAS_MSI\n");
+		len += scnprintf(buf + len, PAGE_SIZE - len, "PCI_HAS_MSI\n");
 	return len;
 }
 
Signature · 1 line
2.16.4
#2 lore raw

PATCH v2 2/8 scsi: be2iscsi: Use scnprintf() for avoiding potential buffer overflow

In reply to Takashi Iwai

Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf().

Cc "James E . J . Bottomley" <[email protected]>
Cc "Martin K . Petersen" <[email protected]>
Cc Subbu Seetharaman <[email protected]>
Cc Ketan Mukadam <[email protected]>
Cc Jitendra Bhivare <[email protected]>

---
v1->v2: Align the remaining lines to the open parenthesis

 drivers/scsi/be2iscsi/be_mgmt.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)
drivers/scsi/be2iscsi/be_mgmt.c +10 -10
index d4febaadfaa3..a2d69b287c7b 100644
@@ -1178,12 +1178,12 @@ beiscsi_active_session_disp(struct device *dev, struct device_attribute *attr,
 		if (test_bit(ulp_num, (void *)&phba->fw_config.ulp_supported)) {
 			avlbl_cids = BEISCSI_ULP_AVLBL_CID(phba, ulp_num);
 			total_cids = BEISCSI_GET_CID_COUNT(phba, ulp_num);
-			len += snprintf(buf+len, PAGE_SIZE - len,
-					"ULP%d : %d\n", ulp_num,
-					(total_cids - avlbl_cids));
+			len += scnprintf(buf+len, PAGE_SIZE - len,
+					 "ULP%d : %d\n", ulp_num,
+					 (total_cids - avlbl_cids));
 		} else
-			len += snprintf(buf+len, PAGE_SIZE - len,
-					"ULP%d : %d\n", ulp_num, 0);
+			len += scnprintf(buf+len, PAGE_SIZE - len,
+					 "ULP%d : %d\n", ulp_num, 0);
 	}
 
 	return len;
@@ -1208,12 +1208,12 @@ beiscsi_free_session_disp(struct device *dev, struct device_attribute *attr,
 
 	for (ulp_num = 0; ulp_num < BEISCSI_ULP_COUNT; ulp_num++) {
 		if (test_bit(ulp_num, (void *)&phba->fw_config.ulp_supported))
-			len += snprintf(buf+len, PAGE_SIZE - len,
-					"ULP%d : %d\n", ulp_num,
-					BEISCSI_ULP_AVLBL_CID(phba, ulp_num));
+			len += scnprintf(buf+len, PAGE_SIZE - len,
+					 "ULP%d : %d\n", ulp_num,
+					 BEISCSI_ULP_AVLBL_CID(phba, ulp_num));
 		else
-			len += snprintf(buf+len, PAGE_SIZE - len,
-					"ULP%d : %d\n", ulp_num, 0);
+			len += scnprintf(buf+len, PAGE_SIZE - len,
+					 "ULP%d : %d\n", ulp_num, 0);
 	}
 
 	return len;
Signature · 1 line
2.16.4
#3 lore raw

PATCH v2 3/8 scsi: fnic: Use scnprintf() for avoiding potential buffer overflow

In reply to Takashi Iwai

Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf().

Cc "James E . J . Bottomley" <[email protected]>
Cc "Martin K . Petersen" <[email protected]>
Cc Satish Kharat <[email protected]>
Cc Sesidhar Baddela <[email protected]>
Cc Karan Tilak Kumar <[email protected]>

---
v1->v2: no change

 drivers/scsi/fnic/fnic_trace.c | 58 +++++++++++++++++++++---------------------
 1 file changed, 29 insertions(+), 29 deletions(-)
drivers/scsi/fnic/fnic_trace.c +29 -29
index a0d01aea28f7..9d52d83161ed 100644
@@ -138,7 +138,7 @@ int fnic_get_trace_data(fnic_dbgfs_t *fnic_dbgfs_prt)
 			 * Dump trace buffer entry to memory file
 			 * and increment read index @rd_idx
 			 */
-			len += snprintf(fnic_dbgfs_prt->buffer + len,
+			len += scnprintf(fnic_dbgfs_prt->buffer + len,
 				  (trace_max_pages * PAGE_SIZE * 3) - len,
 				  "%16llu.%09lu %-50s %8x %8x %16llx %16llx "
 				  "%16llx %16llx %16llx\n", (u64)val.tv_sec,
@@ -180,7 +180,7 @@ int fnic_get_trace_data(fnic_dbgfs_t *fnic_dbgfs_prt)
 			 * Dump trace buffer entry to memory file
 			 * and increment read index @rd_idx
 			 */
-			len += snprintf(fnic_dbgfs_prt->buffer + len,
+			len += scnprintf(fnic_dbgfs_prt->buffer + len,
 				  (trace_max_pages * PAGE_SIZE * 3) - len,
 				  "%16llu.%09lu %-50s %8x %8x %16llx %16llx "
 				  "%16llx %16llx %16llx\n", (u64)val.tv_sec,
@@ -220,12 +220,12 @@ int fnic_get_stats_data(struct stats_debug_info *debug,
 	struct timespec64 val1, val2;
 
 	ktime_get_real_ts64(&val1);
-	len = snprintf(debug->debug_buffer + len, buf_size - len,
+	len = scnprintf(debug->debug_buffer + len, buf_size - len,
 		"------------------------------------------\n"
 		 "\t\tTime\n"
 		"------------------------------------------\n");
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		"Current time :          [%lld:%ld]\n"
 		"Last stats reset time:  [%lld:%09ld]\n"
 		"Last stats read time:   [%lld:%ld]\n"
@@ -243,11 +243,11 @@ int fnic_get_stats_data(struct stats_debug_info *debug,
 
 	stats->stats_timestamps.last_read_time = val1;
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "------------------------------------------\n"
 		  "\t\tIO Statistics\n"
 		  "------------------------------------------\n");
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "Number of Active IOs: %lld\nMaximum Active IOs: %lld\n"
 		  "Number of IOs: %lld\nNumber of IO Completions: %lld\n"
 		  "Number of IO Failures: %lld\nNumber of IO NOT Found: %lld\n"
@@ -280,16 +280,16 @@ int fnic_get_stats_data(struct stats_debug_info *debug,
 		  (u64)atomic64_read(&stats->io_stats.io_btw_10000_to_30000_msec),
 		  (u64)atomic64_read(&stats->io_stats.io_greater_than_30000_msec));
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "\nCurrent Max IO time : %lld\n",
 		  (u64)atomic64_read(&stats->io_stats.current_max_io_time));
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "\n------------------------------------------\n"
 		  "\t\tAbort Statistics\n"
 		  "------------------------------------------\n");
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "Number of Aborts: %lld\n"
 		  "Number of Abort Failures: %lld\n"
 		  "Number of Abort Driver Timeouts: %lld\n"
@@ -318,12 +318,12 @@ int fnic_get_stats_data(struct stats_debug_info *debug,
 		  (u64)atomic64_read(&stats->abts_stats.abort_issued_btw_50_to_60_sec),
 		  (u64)atomic64_read(&stats->abts_stats.abort_issued_greater_than_60_sec));
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "\n------------------------------------------\n"
 		  "\t\tTerminate Statistics\n"
 		  "------------------------------------------\n");
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "Number of Terminates: %lld\n"
 		  "Maximum Terminates: %lld\n"
 		  "Number of Terminate Driver Timeouts: %lld\n"
@@ -337,12 +337,12 @@ int fnic_get_stats_data(struct stats_debug_info *debug,
 		  (u64)atomic64_read(&stats->term_stats.terminate_io_not_found),
 		  (u64)atomic64_read(&stats->term_stats.terminate_failures));
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "\n------------------------------------------\n"
 		  "\t\tReset Statistics\n"
 		  "------------------------------------------\n");
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "Number of Device Resets: %lld\n"
 		  "Number of Device Reset Failures: %lld\n"
 		  "Number of Device Reset Aborts: %lld\n"
@@ -368,12 +368,12 @@ int fnic_get_stats_data(struct stats_debug_info *debug,
 			  &stats->reset_stats.fnic_reset_completions),
 		  (u64)atomic64_read(&stats->reset_stats.fnic_reset_failures));
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "\n------------------------------------------\n"
 		  "\t\tFirmware Statistics\n"
 		  "------------------------------------------\n");
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "Number of Active FW Requests %lld\n"
 		  "Maximum FW Requests: %lld\n"
 		  "Number of FW out of resources: %lld\n"
@@ -383,12 +383,12 @@ int fnic_get_stats_data(struct stats_debug_info *debug,
 		  (u64)atomic64_read(&stats->fw_stats.fw_out_of_resources),
 		  (u64)atomic64_read(&stats->fw_stats.io_fw_errs));
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "\n------------------------------------------\n"
 		  "\t\tVlan Discovery Statistics\n"
 		  "------------------------------------------\n");
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "Number of Vlan Discovery Requests Sent %lld\n"
 		  "Vlan Response Received with no FCF VLAN ID: %lld\n"
 		  "No solicitations recvd after vlan set, expiry count: %lld\n"
@@ -398,7 +398,7 @@ int fnic_get_stats_data(struct stats_debug_info *debug,
 		  (u64)atomic64_read(&stats->vlan_stats.sol_expiry_count),
 		  (u64)atomic64_read(&stats->vlan_stats.flogi_rejects));
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "\n------------------------------------------\n"
 		  "\t\tOther Important Statistics\n"
 		  "------------------------------------------\n");
@@ -406,7 +406,7 @@ int fnic_get_stats_data(struct stats_debug_info *debug,
 	jiffies_to_timespec64(stats->misc_stats.last_isr_time, &val1);
 	jiffies_to_timespec64(stats->misc_stats.last_ack_time, &val2);
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 		  "Last ISR time: %llu (%8llu.%09lu)\n"
 		  "Last ACK time: %llu (%8llu.%09lu)\n"
 		  "Max ISR jiffies: %llu\n"
@@ -452,7 +452,7 @@ int fnic_get_stats_data(struct stats_debug_info *debug,
 		  (u64)atomic64_read(&stats->misc_stats.rport_not_ready),
 		  (u64)atomic64_read(&stats->misc_stats.frame_errors));
 
-	len += snprintf(debug->debug_buffer + len, buf_size - len,
+	len += scnprintf(debug->debug_buffer + len, buf_size - len,
 			"Firmware reported port speed: %llu\n",
 			(u64)atomic64_read(
 				&stats->misc_stats.current_port_speed));
@@ -742,7 +742,7 @@ int fnic_fc_trace_get_data(fnic_dbgfs_t *fnic_dbgfs_prt, u8 rdata_flag)
 	rd_idx = fc_trace_entries.rd_idx;
 	wr_idx = fc_trace_entries.wr_idx;
 	if (rdata_flag == 0) {
-		len += snprintf(fnic_dbgfs_prt->buffer + len,
+		len += scnprintf(fnic_dbgfs_prt->buffer + len,
 			(fnic_fc_trace_max_pages * PAGE_SIZE * 3) - len,
 			"Time Stamp (UTC)\t\t"
 			"Host No:   F Type:  len:     FCoE_FRAME:\n");
@@ -762,11 +762,11 @@ int fnic_fc_trace_get_data(fnic_dbgfs_t *fnic_dbgfs_prt, u8 rdata_flag)
 		} else {
 			fc_trace = (char *)tdata;
 			for (j = 0; j < FC_TRC_SIZE_BYTES; j++) {
-				len += snprintf(fnic_dbgfs_prt->buffer + len,
+				len += scnprintf(fnic_dbgfs_prt->buffer + len,
 				(fnic_fc_trace_max_pages * PAGE_SIZE * 3)
 				- len, "%02x", fc_trace[j] & 0xff);
 			} /* for loop */
-			len += snprintf(fnic_dbgfs_prt->buffer + len,
+			len += scnprintf(fnic_dbgfs_prt->buffer + len,
 				(fnic_fc_trace_max_pages * PAGE_SIZE * 3) - len,
 				"\n");
 		}
@@ -810,7 +810,7 @@ void copy_and_format_trace_data(struct fc_trace_hdr *tdata,
 	time64_to_tm(tdata->time_stamp.tv_sec, 0, &tm);
 
 	fmt = "%02d:%02d:%04ld %02d:%02d:%02d.%09lu ns%8x       %c%8x\t";
-	len += snprintf(fnic_dbgfs_prt->buffer + len,
+	len += scnprintf(fnic_dbgfs_prt->buffer + len,
 		max_size - len,
 		fmt,
 		tm.tm_mon + 1, tm.tm_mday, tm.tm_year + 1900,
@@ -823,25 +823,25 @@ void copy_and_format_trace_data(struct fc_trace_hdr *tdata,
 	for (j = 0; j < min_t(u8, tdata->frame_len,
 		(u8)(FC_TRC_SIZE_BYTES - FC_TRC_HEADER_SIZE)); j++) {
 		if (tdata->frame_type == FNIC_FC_LE) {
-			len += snprintf(fnic_dbgfs_prt->buffer + len,
+			len += scnprintf(fnic_dbgfs_prt->buffer + len,
 				max_size - len, "%c", fc_trace[j]);
 		} else {
-			len += snprintf(fnic_dbgfs_prt->buffer + len,
+			len += scnprintf(fnic_dbgfs_prt->buffer + len,
 				max_size - len, "%02x", fc_trace[j] & 0xff);
-			len += snprintf(fnic_dbgfs_prt->buffer + len,
+			len += scnprintf(fnic_dbgfs_prt->buffer + len,
 				max_size - len, " ");
 			if (j == ethhdr_len ||
 				j == ethhdr_len + fcoehdr_len ||
 				j == ethhdr_len + fcoehdr_len + fchdr_len ||
 				(i > 3 && j%fchdr_len == 0)) {
-				len += snprintf(fnic_dbgfs_prt->buffer
+				len += scnprintf(fnic_dbgfs_prt->buffer
 					+ len, max_size - len,
 					"\n\t\t\t\t\t\t\t\t");
 				i++;
 			}
 		} /* end of else*/
 	} /* End of for loop*/
-	len += snprintf(fnic_dbgfs_prt->buffer + len,
+	len += scnprintf(fnic_dbgfs_prt->buffer + len,
 		max_size - len, "\n");
 	*orig_len = len;
 }
Signature · 1 line
2.16.4
#4 lore raw

PATCH v2 4/8 scsi: gdth: Use scnprintf() for avoiding potential buffer overflow

In reply to Takashi Iwai

Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf().

Cc "James E . J . Bottomley" <[email protected]>
Cc "Martin K . Petersen" <[email protected]>
Cc Achim Leubner <[email protected]>

---
v1->v2: no change

 drivers/scsi/gdth_proc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/gdth_proc.c +1 -1
index 381d849726ac..34149842cf1c 100644
@@ -193,7 +193,7 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host)
         for (i = 1;  i < MAX_RES_ARGS; i++) {
             if (reserve_list[i] == 0xff) 
                 break;
-            hlen += snprintf(hrec + hlen , 161 - hlen, ",%d", reserve_list[i]);
+            hlen += scnprintf(hrec + hlen , 161 - hlen, ",%d", reserve_list[i]);
         }
     }
     seq_printf(m,
Signature · 1 line
2.16.4
#5 lore raw

PATCH v2 5/8 scsi: ipr: Use scnprintf() for avoiding potential buffer overflow

In reply to Takashi Iwai

Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf().

Cc "James E . J . Bottomley" <[email protected]>
Cc "Martin K . Petersen" <[email protected]>
Cc Brian King <[email protected]>

---
v1->v2: no change

 drivers/scsi/ipr.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/scsi/ipr.c +3 -3
index cd8db1349871..d48a8fa997b9 100644
@@ -1299,9 +1299,9 @@ static char *__ipr_format_res_path(u8 *res_path, char *buffer, int len)
 	char *p = buffer;
 
 	*p = '\0';
-	p += snprintf(p, buffer + len - p, "%02X", res_path[0]);
+	p += scnprintf(p, buffer + len - p, "%02X", res_path[0]);
 	for (i = 1; res_path[i] != 0xff && ((i * 3) < len); i++)
-		p += snprintf(p, buffer + len - p, "-%02X", res_path[i]);
+		p += scnprintf(p, buffer + len - p, "-%02X", res_path[i]);
 
 	return buffer;
 }
@@ -1322,7 +1322,7 @@ static char *ipr_format_res_path(struct ipr_ioa_cfg *ioa_cfg,
 	char *p = buffer;
 
 	*p = '\0';
-	p += snprintf(p, buffer + len - p, "%d/", ioa_cfg->host->host_no);
+	p += scnprintf(p, buffer + len - p, "%d/", ioa_cfg->host->host_no);
 	__ipr_format_res_path(res_path, p, len - (buffer - p));
 	return buffer;
 }
Signature · 1 line
2.16.4
#6 lore raw

PATCH v2 6/8 scsi: megaraid_sas: Use scnprintf() for avoiding potential buffer overflow

In reply to Takashi Iwai

Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf().

Also corrected the wrongly passed limit size. The remaining buffer size must be decremented.

Cc "James E . J . Bottomley" <[email protected]>
Cc "Martin K . Petersen" <[email protected]>
Cc Kashyap Desai <[email protected]>
Cc Sumit Saxena <[email protected]>
Cc Shivasharan S <[email protected]>

---
v1->v2: Align the remaining lines to the open parenthesis

 drivers/scsi/megaraid/megaraid_sas_base.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/scsi/megaraid/megaraid_sas_base.c +4 -3
index 5bebdd397580..babe85d7b537 100644
@@ -2987,9 +2987,10 @@ megasas_dump_sys_regs(void __iomem *reg_set, char *buf)
 	u32 __iomem *reg = (u32 __iomem *)reg_set;
 
 	for (i = 0; i < sz / sizeof(u32); i++) {
-		bytes_wrote += snprintf(loc + bytes_wrote, PAGE_SIZE,
-					"%08x: %08x\n", (i * 4),
-					readl(&reg[i]));
+		bytes_wrote += scnprintf(loc + bytes_wrote,
+					 PAGE_SIZE - bytes_wrote,
+					 "%08x: %08x\n", (i * 4),
+					 readl(&reg[i]));
 	}
 	return bytes_wrote;
 }
Signature · 1 line
2.16.4
#7 lore raw

PATCH v2 7/8 scsi: core: Use scnprintf() for avoiding potential buffer overflow

In reply to Takashi Iwai

Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf().

Cc "James E . J . Bottomley" <[email protected]>
Cc "Martin K . Petersen" <[email protected]>

---
v1->v2: no change

 drivers/scsi/scsi_sysfs.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/scsi/scsi_sysfs.c +5 -5
index c3a30ba4ae08..163dbcb741c1 100644
@@ -1045,14 +1045,14 @@ sdev_show_blacklist(struct device *dev, struct device_attribute *attr,
 			name = sdev_bflags_name[i];
 
 		if (name)
-			len += snprintf(buf + len, PAGE_SIZE - len,
-					"%s%s", len ? " " : "", name);
+			len += scnprintf(buf + len, PAGE_SIZE - len,
+					 "%s%s", len ? " " : "", name);
 		else
-			len += snprintf(buf + len, PAGE_SIZE - len,
-					"%sINVALID_BIT(%d)", len ? " " : "", i);
+			len += scnprintf(buf + len, PAGE_SIZE - len,
+					 "%sINVALID_BIT(%d)", len ? " " : "", i);
 	}
 	if (len)
-		len += snprintf(buf + len, PAGE_SIZE - len, "\n");
+		len += scnprintf(buf + len, PAGE_SIZE - len, "\n");
 	return len;
 }
 static DEVICE_ATTR(blacklist, S_IRUGO, sdev_show_blacklist, NULL);
Signature · 1 line
2.16.4
#8 lore raw

PATCH v2 8/8 scsi: smartpqi: Use scnprintf() for avoiding potential buffer overflow

In reply to Takashi Iwai

Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf().

Cc "James E . J . Bottomley" <[email protected]>
Cc "Martin K . Petersen" <[email protected]>
Cc Don Brace <[email protected]>

---
v1->v2: no change

 drivers/scsi/smartpqi/smartpqi_init.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)
drivers/scsi/smartpqi/smartpqi_init.c +11 -11
index b7492568e02f..cd157f11eb22 100644
@@ -1614,28 +1614,28 @@ static void pqi_dev_info(struct pqi_ctrl_info *ctrl_info,
 		"%d:%d:", ctrl_info->scsi_host->host_no, device->bus);
 
 	if (device->target_lun_valid)
-		count += snprintf(buffer + count,
+		count += scnprintf(buffer + count,
 			PQI_DEV_INFO_BUFFER_LENGTH - count,
 			"%d:%d",
 			device->target,
 			device->lun);
 	else
-		count += snprintf(buffer + count,
+		count += scnprintf(buffer + count,
 			PQI_DEV_INFO_BUFFER_LENGTH - count,
 			"-:-");
 
 	if (pqi_is_logical_device(device))
-		count += snprintf(buffer + count,
+		count += scnprintf(buffer + count,
 			PQI_DEV_INFO_BUFFER_LENGTH - count,
 			" %08x%08x",
 			*((u32 *)&device->scsi3addr),
 			*((u32 *)&device->scsi3addr[4]));
 	else
-		count += snprintf(buffer + count,
+		count += scnprintf(buffer + count,
 			PQI_DEV_INFO_BUFFER_LENGTH - count,
 			" %016llx", device->sas_address);
 
-	count += snprintf(buffer + count, PQI_DEV_INFO_BUFFER_LENGTH - count,
+	count += scnprintf(buffer + count, PQI_DEV_INFO_BUFFER_LENGTH - count,
 		" %s %.8s %.16s ",
 		pqi_device_type(device),
 		device->vendor,
@@ -1643,19 +1643,19 @@ static void pqi_dev_info(struct pqi_ctrl_info *ctrl_info,
 
 	if (pqi_is_logical_device(device)) {
 		if (device->devtype == TYPE_DISK)
-			count += snprintf(buffer + count,
+			count += scnprintf(buffer + count,
 				PQI_DEV_INFO_BUFFER_LENGTH - count,
 				"SSDSmartPathCap%c En%c %-12s",
 				device->raid_bypass_configured ? '+' : '-',
 				device->raid_bypass_enabled ? '+' : '-',
 				pqi_raid_level_to_string(device->raid_level));
 	} else {
-		count += snprintf(buffer + count,
+		count += scnprintf(buffer + count,
 			PQI_DEV_INFO_BUFFER_LENGTH - count,
 			"AIO%c", device->aio_enabled ? '+' : '-');
 		if (device->devtype == TYPE_DISK ||
 			device->devtype == TYPE_ZBC)
-			count += snprintf(buffer + count,
+			count += scnprintf(buffer + count,
 				PQI_DEV_INFO_BUFFER_LENGTH - count,
 				" qd=%-6d", device->queue_depth);
 	}
@@ -6191,14 +6191,14 @@ static ssize_t pqi_lockup_action_show(struct device *dev,
 
 	for (i = 0; i < ARRAY_SIZE(pqi_lockup_actions); i++) {
 		if (pqi_lockup_actions[i].action == pqi_lockup_action)
-			count += snprintf(buffer + count, PAGE_SIZE - count,
+			count += scnprintf(buffer + count, PAGE_SIZE - count,
 				"[%s] ", pqi_lockup_actions[i].name);
 		else
-			count += snprintf(buffer + count, PAGE_SIZE - count,
+			count += scnprintf(buffer + count, PAGE_SIZE - count,
 				"%s ", pqi_lockup_actions[i].name);
 	}
 
-	count += snprintf(buffer + count, PAGE_SIZE - count, "\n");
+	count += scnprintf(buffer + count, PAGE_SIZE - count, "\n");
 
 	return count;
 }
Signature · 1 line
2.16.4
#9 lore raw
In reply to Takashi Iwai

Takashi,

Quoted 2 lines

here is a respin of trivial patch series just to convert suspicious snprintf() usages with the more safer one, scnprintf().

Applied to 5.7/scsi-queue, thanks!

Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering