arm64: dts: ls1028a: various sl28 fixes/updates
Subsystems (2)
v2 cover arm64: dts: ls1028a: various sl28 fixes/updates
Hi,
this patchset contains device tree fixes and updates for the Kontron SMARC-sAL28 board.
Changes since v1:
- added "arm64: dts: freescale: sl28: add SPI flash" which was forgotten in the first series.
Michael Walle (4):
arm64: dts: freescale: sl28: add SPI flash
arm64: dts: ls1028a: sl28: fix on-board EEPROMS
arm64: dts: ls1028a: sl28: expose switch ports in KBox A-230-LS
arm64: dts: ls1028a: sl28: add support for variant 2
arch/arm64/boot/dts/freescale/Makefile | 1 + .../fsl-ls1028a-kontron-kbox-a-230-ls.dts | 66 +++++++++++++++++- .../fsl-ls1028a-kontron-sl28-var2.dts | 68 +++++++++++++++++++ .../fsl-ls1028a-kontron-sl28-var3-ads2.dts | 23 +++++-- .../freescale/fsl-ls1028a-kontron-sl28.dts | 12 ++++ 5 files changed, 161 insertions(+), 9 deletions(-) create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
Signature · 1 line
2.20.1
PATCH v2 1/4 arm64: dts: freescale: sl28: add SPI flash
There is a SPI flash on this carrier connected to the third DSPI controller. Add it.
--- .../dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts | 9 +++++++++ .../boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts | 6 ++++++ 2 files changed, 15 insertions(+)
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts +9 -0
@@ -68,6 +68,15 @@ }; }; +&dspi2 { + flash@0 { + compatible = "jedec,spi-nor"; + m25p,fast-read; + spi-max-frequency = <100000000>; + reg = <0>; + }; +}; + &i2c4 { status = "okay";
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts +6 -0
@@ -17,6 +17,8 @@ crypto = &crypto; serial0 = &duart0; serial1 = &duart1; + spi0 = &fspi; + spi1 = &dspi2; }; chosen {
@@ -24,6 +26,10 @@ }; }; +&dspi2 { + status = "okay"; +}; + &duart0 { status = "okay"; };
Signature · 1 line
2.20.1
PATCH v2 2/4 arm64: dts: ls1028a: sl28: fix on-board EEPROMS
In reply to Michael WalleThe module itself has another EEPROM at 50h on I2C4. The EEPROM on the carriers is located at 57h on I2C3. Fix that in the device trees.
--- .../fsl-ls1028a-kontron-kbox-a-230-ls.dts | 6 +++--- .../fsl-ls1028a-kontron-sl28-var3-ads2.dts | 14 ++++++++------ .../dts/freescale/fsl-ls1028a-kontron-sl28.dts | 6 ++++++ 3 files changed, 17 insertions(+), 9 deletions(-)
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts +3 -3
@@ -18,10 +18,10 @@ "kontron,sl28", "fsl,ls1028a"; }; -&i2c4 { - eeprom@50 { +&i2c3 { + eeprom@57 { compatible = "atmel,24c32"; - reg = <0x50>; + reg = <0x57>; pagesize = <32>; }; };
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts +8 -6
@@ -77,6 +77,14 @@ }; }; +&i2c3 { + eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <32>; + }; +}; + &i2c4 { status = "okay";
@@ -89,12 +97,6 @@ assigned-clocks = <&mclk>; assigned-clock-rates = <1250000>; }; - - eeprom@50 { - compatible = "atmel,24c32"; - reg = <0x50>; - pagesize = <32>; - }; }; &sai5 {
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts +6 -0
@@ -178,4 +178,10 @@ &i2c4 { status = "okay"; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + }; };
Signature · 1 line
2.20.1
PATCH v2 3/4 arm64: dts: ls1028a: sl28: expose switch ports in KBox A-230-LS
In reply to Michael WalleThe KBox A-230-LS supports four external ports which are connected to the internal switch of the LS1028A via QSGMII. Now that the Felix switch is supported, add these ports in the device tree.
--- .../fsl-ls1028a-kontron-kbox-a-230-ls.dts | 60 +++++++++++++++++++ 1 file changed, 60 insertions(+)
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts +60 -0
@@ -18,6 +18,29 @@ "kontron,sl28", "fsl,ls1028a"; }; +&enetc_mdio_pf3 { + /* BCM54140 QSGMII quad PHY */ + qsgmii_phy0: ethernet-phy@7 { + reg = <7>; + }; + + qsgmii_phy1: ethernet-phy@8 { + reg = <8>; + }; + + qsgmii_phy2: ethernet-phy@9 { + reg = <9>; + }; + + qsgmii_phy3: ethernet-phy@10 { + reg = <10>; + }; +}; + +&enetc_port2 { + status = "okay"; +}; + &i2c3 { eeprom@57 { compatible = "atmel,24c32";
@@ -25,3 +48,40 @@ pagesize = <32>; }; }; + +&mscc_felix_port0 { + label = "swp0"; + managed = "in-band-status"; + phy-handle = <&qsgmii_phy0>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&mscc_felix_port1 { + label = "swp1"; + managed = "in-band-status"; + phy-handle = <&qsgmii_phy1>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&mscc_felix_port2 { + label = "swp2"; + managed = "in-band-status"; + phy-handle = <&qsgmii_phy2>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&mscc_felix_port3 { + label = "swp3"; + managed = "in-band-status"; + phy-handle = <&qsgmii_phy3>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&mscc_felix_port4 { + ethernet = <&enetc_port2>; + status = "okay"; +};
Signature · 1 line
2.20.1
PATCH v2 4/4 arm64: dts: ls1028a: sl28: add support for variant 2
In reply to Michael WalleNow that there is support for the Felix switch this variant can also be added. It features two external ports ethernet ports which are connected to the internal switch core. No direct connection to any of the enetc's is supported.
--- arch/arm64/boot/dts/freescale/Makefile | 1 + .../fsl-ls1028a-kontron-sl28-var2.dts | 68 +++++++++++++++++++ 2 files changed, 69 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
arch/arm64/boot/dts/freescale/Makefile +1 -0
@@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-kbox-a-230-ls.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var2.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3-ads2.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts new file +68 -0
68 lines not on this page · raw message
Signature · 1 line
2.20.1
Shawn Guo
AppliedQuoted 9 lines · Michael Walle
Hi,
this patchset contains device tree fixes and updates for the Kontron SMARC-sAL28 board.
Changes since v1:
- added "arm64: dts: freescale: sl28: add SPI flash" which was forgotten in the first series.
Quoted 5 lines
Michael Walle (4):
arm64: dts: freescale: sl28: add SPI flash
arm64: dts: ls1028a: sl28: fix on-board EEPROMS
arm64: dts: ls1028a: sl28: expose switch ports in KBox A-230-LS
arm64: dts: ls1028a: sl28: add support for variant 2
Applied all, thanks.