Skip to contentSkip to conversation

ext4: Check for non-zero journal inum in ext4_calculate_overhead

PATCH Applied Ritesh Harjani 4 participants 5 messages Mar 16, 2020 – Mar 24, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ext4: Check for non-zero journal inum in ext4_calculate_overhead

While calculating overhead for internal journal, also check that j_inum shouldn't be 0. Otherwise we get below error with xfstests generic/050 with external journal (XXX_LOGDEV config) enabled.

It could be simply reproduced with loop device with an external journal and marking blockdev as RO before mounting.

[ 3337.146838] EXT4-fs error (device pmem1p2): ext4_get_journal_inode:4634: comm mount: inode #0: comm mount: iget: illegal inode #
------------[ cut here ]------------
generic_make_request: Trying to write to read-only block-device pmem1p2 (partno 2)
WARNING: CPU: 107 PID: 115347 at block/blk-core.c:788 generic_make_request_checks+0x6b4/0x7d0
CPU: 107 PID: 115347 Comm: mount Tainted: G             L   --------- -t - 4.18.0-167.el8.ppc64le #1
NIP:  c0000000006f6d44 LR: c0000000006f6d40 CTR: 0000000030041dd4

<...>
NIP [c0000000006f6d44] generic_make_request_checks+0x6b4/0x7d0 LR [c0000000006f6d40] generic_make_request_checks+0x6b0/0x7d0 <...>

Call Trace:
generic_make_request_checks+0x6b0/0x7d0 (unreliable)
generic_make_request+0x3c/0x420
submit_bio+0xd8/0x200
submit_bh_wbc+0x1e8/0x250
__sync_dirty_buffer+0xd0/0x210
ext4_commit_super+0x310/0x420 [ext4]
__ext4_error+0xa4/0x1e0 [ext4]
__ext4_iget+0x388/0xe10 [ext4]
ext4_get_journal_inode+0x40/0x150 [ext4]
ext4_calculate_overhead+0x5a8/0x610 [ext4]
ext4_fill_super+0x3188/0x3260 [ext4]
mount_bdev+0x778/0x8f0
ext4_mount+0x28/0x50 [ext4]
mount_fs+0x74/0x230
vfs_kern_mount.part.6+0x6c/0x250
do_mount+0x2fc/0x1280
sys_mount+0x158/0x180
system_call+0x5c/0x70

EXT4-fs (pmem1p2): no journal found
EXT4-fs (pmem1p2): can't get journal size
EXT4-fs (pmem1p2): mounted filesystem without journal. Opts: dax,norecovery

---
 fs/ext4/super.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
fs/ext4/super.c +2 -1
index de5398c07161..5dc65b7583cb 100644
@@ -3609,7 +3609,8 @@ int ext4_calculate_overhead(struct super_block *sb)
 	 */
 	if (sbi->s_journal && !sbi->journal_bdev)
 		overhead += EXT4_NUM_B2C(sbi, sbi->s_journal->j_maxlen);
-	else if (ext4_has_feature_journal(sb) && !sbi->s_journal) {
+	else if (ext4_has_feature_journal(sb) && !sbi->s_journal && j_inum) {
+		/* j_inum for internal journal is non-zero */
 		j_inode = ext4_get_journal_inode(sb, j_inum);
 		if (j_inode) {
 			j_blocks = j_inode->i_size >> sb->s_blocksize_bits;
Signature · 1 line
2.21.0
reviewer Reviewed-by on v1 1/1
#1 lore raw
Quoted 36 lines · Ritesh Harjani

While calculating overhead for internal journal, also check that j_inum shouldn't be 0. Otherwise we get below error with xfstests generic/050 with external journal (XXX_LOGDEV config) enabled.

It could be simply reproduced with loop device with an external journal and marking blockdev as RO before mounting.

[ 3337.146838] EXT4-fs error (device pmem1p2): ext4_get_journal_inode:4634: comm mount: inode #0: comm mount: iget: illegal inode #
------------[ cut here ]------------
generic_make_request: Trying to write to read-only block-device pmem1p2 (partno 2)
WARNING: CPU: 107 PID: 115347 at block/blk-core.c:788 generic_make_request_checks+0x6b4/0x7d0
CPU: 107 PID: 115347 Comm: mount Tainted: G             L   --------- -t - 4.18.0-167.el8.ppc64le #1
NIP:  c0000000006f6d44 LR: c0000000006f6d40 CTR: 0000000030041dd4

<...>
NIP [c0000000006f6d44] generic_make_request_checks+0x6b4/0x7d0 LR [c0000000006f6d40] generic_make_request_checks+0x6b0/0x7d0 <...>

Call Trace:
generic_make_request_checks+0x6b0/0x7d0 (unreliable)
generic_make_request+0x3c/0x420
submit_bio+0xd8/0x200
submit_bh_wbc+0x1e8/0x250
__sync_dirty_buffer+0xd0/0x210
ext4_commit_super+0x310/0x420 [ext4]
__ext4_error+0xa4/0x1e0 [ext4]
__ext4_iget+0x388/0xe10 [ext4]
ext4_get_journal_inode+0x40/0x150 [ext4]
ext4_calculate_overhead+0x5a8/0x610 [ext4]
ext4_fill_super+0x3188/0x3260 [ext4]
mount_bdev+0x778/0x8f0
ext4_mount+0x28/0x50 [ext4]
mount_fs+0x74/0x230
vfs_kern_mount.part.6+0x6c/0x250
do_mount+0x2fc/0x1280
sys_mount+0x158/0x180
system_call+0x5c/0x70
Quoted 6 lines

EXT4-fs (pmem1p2): no journal found
EXT4-fs (pmem1p2): can't get journal size
EXT4-fs (pmem1p2): mounted filesystem without journal. Opts: dax,norecovery

The patch looks good to me. You can add:

Honza

Quoted 21 lines
---
 fs/ext4/super.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
fs/ext4/super.c +2 -1
index de5398c07161..5dc65b7583cb 100644
@@ -3609,7 +3609,8 @@ int ext4_calculate_overhead(struct super_block *sb)
 	 */
 	if (sbi->s_journal && !sbi->journal_bdev)
 		overhead += EXT4_NUM_B2C(sbi, sbi->s_journal->j_maxlen);
-	else if (ext4_has_feature_journal(sb) && !sbi->s_journal) {
+	else if (ext4_has_feature_journal(sb) && !sbi->s_journal && j_inum) {
+		/* j_inum for internal journal is non-zero */
 		j_inode = ext4_get_journal_inode(sb, j_inum);
 		if (j_inode) {
 			j_blocks = j_inode->i_size >> sb->s_blocksize_bits;
Signature · 1 line
2.21.0
Signature · 2 lines
Jan Kara <[email protected]>
SUSE Labs, CR
#2 lore raw
In reply to Ritesh Harjani
Quoted 10 lines · Ritesh Harjani

While calculating overhead for internal journal, also check that j_inum shouldn't be 0. Otherwise we get below error with xfstests generic/050 with external journal (XXX_LOGDEV config) enabled.

It could be simply reproduced with loop device with an external journal and marking blockdev as RO before mounting.

[ 3337.146838] EXT4-fs error (device pmem1p2): ext4_get_journal_inode:4634: comm mount: inode #0: comm mount: iget: illegal inode #
------------[ cut here ]------------
generic_make_request: Trying to write to read-only block-device pmem1p2 (partno 2)

I think this 2nd error comes from:

static void save_error_info(struct super_block *sb, const char *func,
unsigned int line)

{
        __save_error_info(sb, func, line);
        ext4_commit_super(sb, 1);
}

__save_error_info() returns if bdev_read_only() but then we try to commit the super anyway. Shouldn't save_error_info() return early if bdev_read_only()?

(that'd be a separate patch, I'll send it)

-Eric

#3 lore raw
Quoted 21 lines · Eric Sandeen
Quoted 10 lines · Ritesh Harjani

While calculating overhead for internal journal, also check that j_inum shouldn't be 0. Otherwise we get below error with xfstests generic/050 with external journal (XXX_LOGDEV config) enabled.

It could be simply reproduced with loop device with an external journal and marking blockdev as RO before mounting.

[ 3337.146838] EXT4-fs error (device pmem1p2): ext4_get_journal_inode:4634: comm mount: inode #0: comm mount: iget: illegal inode #
------------[ cut here ]------------
generic_make_request: Trying to write to read-only block-device pmem1p2 (partno 2)

I think this 2nd error comes from:

static void save_error_info(struct super_block *sb, const char *func,
unsigned int line)

{
         __save_error_info(sb, func, line);
         ext4_commit_super(sb, 1);
}
Quoted 4 lines

__save_error_info() returns if bdev_read_only() but then we try to commit the super anyway. Shouldn't save_error_info() return early if bdev_read_only()?

(that'd be a separate patch, I'll send it)

Thanks. Sounds good to me.

Quoted 3 lines

-Eric

maintainer Applied
#4 lore raw
In reply to Ritesh Harjani
Quoted 36 lines · Ritesh Harjani

While calculating overhead for internal journal, also check that j_inum shouldn't be 0. Otherwise we get below error with xfstests generic/050 with external journal (XXX_LOGDEV config) enabled.

It could be simply reproduced with loop device with an external journal and marking blockdev as RO before mounting.

[ 3337.146838] EXT4-fs error (device pmem1p2): ext4_get_journal_inode:4634: comm mount: inode #0: comm mount: iget: illegal inode #
------------[ cut here ]------------
generic_make_request: Trying to write to read-only block-device pmem1p2 (partno 2)
WARNING: CPU: 107 PID: 115347 at block/blk-core.c:788 generic_make_request_checks+0x6b4/0x7d0
CPU: 107 PID: 115347 Comm: mount Tainted: G             L   --------- -t - 4.18.0-167.el8.ppc64le #1
NIP:  c0000000006f6d44 LR: c0000000006f6d40 CTR: 0000000030041dd4

<...>
NIP [c0000000006f6d44] generic_make_request_checks+0x6b4/0x7d0 LR [c0000000006f6d40] generic_make_request_checks+0x6b0/0x7d0 <...>

Call Trace:
generic_make_request_checks+0x6b0/0x7d0 (unreliable)
generic_make_request+0x3c/0x420
submit_bio+0xd8/0x200
submit_bh_wbc+0x1e8/0x250
__sync_dirty_buffer+0xd0/0x210
ext4_commit_super+0x310/0x420 [ext4]
__ext4_error+0xa4/0x1e0 [ext4]
__ext4_iget+0x388/0xe10 [ext4]
ext4_get_journal_inode+0x40/0x150 [ext4]
ext4_calculate_overhead+0x5a8/0x610 [ext4]
ext4_fill_super+0x3188/0x3260 [ext4]
mount_bdev+0x778/0x8f0
ext4_mount+0x28/0x50 [ext4]
mount_fs+0x74/0x230
vfs_kern_mount.part.6+0x6c/0x250
do_mount+0x2fc/0x1280
sys_mount+0x158/0x180
system_call+0x5c/0x70
Quoted 6 lines

EXT4-fs (pmem1p2): no journal found
EXT4-fs (pmem1p2): can't get journal size
EXT4-fs (pmem1p2): mounted filesystem without journal. Opts: dax,norecovery

Applied, thanks.

- Ted