rtw88: 8822c: config RF table path B before path A
PATCH 1/1 rtw88: 8822c: config RF table path B before path A
From: Yan-Hsuan Chuang <[email protected]>
After MAC switched power, the hardware's RF registers will have its default value, but the default value for path B is incorrect. So, load RF path B first, to decrease the period between MAC on and RF path B config.
By test, if we load path A first, then there's ~300ms that the path B is incorrect, it could lead to BT coex's A2DP glitch. But if we configure path B first, there will only have ~3ms, significantly lower possibility to have A2DP sound glitch.
--- drivers/net/wireless/realtek/rtw88/rtw8822c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/realtek/rtw88/rtw8822c.c +1 -1
@@ -4128,7 +4128,7 @@ struct rtw_chip_info rtw8822c_hw_spec = { .agc_tbl = &rtw8822c_agc_tbl, .bb_tbl = &rtw8822c_bb_tbl, .rfk_init_tbl = &rtw8822c_array_mp_cal_init_tbl, - .rf_tbl = {&rtw8822c_rf_a_tbl, &rtw8822c_rf_b_tbl}, + .rf_tbl = {&rtw8822c_rf_b_tbl, &rtw8822c_rf_a_tbl}, .rfe_defs = rtw8822c_rfe_defs, .rfe_defs_size = ARRAY_SIZE(rtw8822c_rfe_defs), .en_dis_dpd = true,
Signature · 1 line
2.17.1
Quoted 7 lines · <[email protected]> wrote:
From: Yan-Hsuan Chuang <[email protected]>
After MAC switched power, the hardware's RF registers will have its default value, but the default value for path B is incorrect. So, load RF path B first, to decrease the period between MAC on and RF path B config.
Quoted 6 lines
By test, if we load path A first, then there's ~300ms that the path B is incorrect, it could lead to BT coex's A2DP glitch. But if we configure path B first, there will only have ~3ms, significantly lower possibility to have A2DP sound glitch.
Signed-off-by Yan-Hsuan Chuang <[email protected]>
Patch applied to wireless-drivers-next.git, thanks.
11a64888c79b rtw88: 8822c: config RF table path B before path A
Signature · 3 lines
https://patchwork.kernel.org/patch/11444805/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches