i2c: core: Provide generic definitions for bus frequencies
Subsystems (8)
PATCH v3 1/6 i2c: core: Provide generic definitions for bus frequencies
There are few maximum bus frequencies being used in the I²C core code. Provide generic definitions for bus frequencies and use them in the core.
The drivers may use predefined constants where it is appropriate. Some of them are already using these under slightly different names. We will convert them later to use newly introduced defines.
Note, the name of modes are chosen to follow well established naming scheme [1].
These definitions will also help to avoid typos in the numbers that may lead to subtle errors.
[1]: https://en.wikipedia.org/wiki/I%C2%B2C#Differences_between_modes
---
v3: added link to Wiki to point the mode naming scheme out
drivers/i2c/i2c-core-acpi.c | 2 +- drivers/i2c/i2c-core-base.c | 8 ++++---- include/linux/i2c.h | 8 ++++++++ 3 files changed, 13 insertions(+), 5 deletions(-)
drivers/i2c/i2c-core-acpi.c +1 -1
@@ -318,7 +318,7 @@ static acpi_status i2c_acpi_lookup_speed(acpi_handle handle, u32 level, lookup->min_speed = lookup->speed;if (acpi_match_device_ids (adev, i2c_acpi_force_400khz_device_ids) ==0 ) - lookup->force_speed =400000 ; + lookup->force_speed =I2C_MAX_FAST_MODE_FREQ ;return AE_OK ; }
drivers/i2c/i2c-core-base.c +4 -4
@@ -1612,13 +1612,13 @@ void i2c_parse_fw_timings(struct device *dev, struct i2c_timings *t, bool use_de ret =device_property_read_u32 (dev,"clock-frequency" , &t->bus_freq_hz);if (ret && use_defaults) - t->bus_freq_hz =100000 ; + t->bus_freq_hz =I2C_MAX_STANDARD_MODE_FREQ ; ret =device_property_read_u32 (dev,"i2c-scl-rising-time-ns" , &t->scl_rise_ns);if (ret && use_defaults) { -if (t->bus_freq_hz <=100000 ) +if (t->bus_freq_hz <=I2C_MAX_STANDARD_MODE_FREQ ) t->scl_rise_ns =1000 ; -else if (t->bus_freq_hz <=400000 ) +else if (t->bus_freq_hz <=I2C_MAX_FAST_MODE_FREQ ) t->scl_rise_ns =300 ;else t->scl_rise_ns =120 ;
@@ -1626,7 +1626,7 @@ void i2c_parse_fw_timings(struct device *dev, struct i2c_timings *t, bool use_de ret =device_property_read_u32 (dev,"i2c-scl-falling-time-ns" , &t->scl_fall_ns);if (ret && use_defaults) { -if (t->bus_freq_hz <=400000 ) +if (t->bus_freq_hz <=I2C_MAX_FAST_MODE_FREQ ) t->scl_fall_ns =300 ;else t->scl_fall_ns =120 ;
include/linux/i2c.h +8 -0
@@ -39,6 +39,14 @@ enum i2c_slave_event;typedef int (*i2c_slave_cb_t )(struct i2c_client *client,enum i2c_slave_event event,u8 *val); +/* I2C Frequency Modes */ +#define I2C_MAX_STANDARD_MODE_FREQ 100000 +#define I2C_MAX_FAST_MODE_FREQ 400000 +#define I2C_MAX_FAST_MODE_PLUS_FREQ 1000000 +#define I2C_MAX_TURBO_MODE_FREQ 1400000 +#define I2C_MAX_HIGH_SPEED_MODE_FREQ 3400000 +#define I2C_MAX_ULTRA_FAST_MODE_FREQ 5000000 +struct module ;struct property_entry ;
Signature · 1 line
2.25.1
PATCH v3 2/6 i2c: core: Allow override timing properties with 0
Some drivers may allow to override properties with 0 value when defaults are not in use, thus, replace memset() with corresponding per property update.
---
v3: new patch
drivers/i2c/busses/i2c-rcar.c | 2 +- drivers/i2c/i2c-core-base.c | 30 +++++++++++++++++------------- 2 files changed, 18 insertions(+), 14 deletions(-)
drivers/i2c/busses/i2c-rcar.c +1 -1
@@ -920,7 +920,7 @@ static int rcar_i2c_probe(struct platform_device *pdev)struct rcar_i2c_priv *priv;struct i2c_adapter *adap;struct device *dev = &pdev->dev; -struct i2c_timings i2c_t; +struct i2c_timings i2c_t = {0 };int ret;/* Otherwise logic will break because some bytes must always use PIO */
drivers/i2c/i2c-core-base.c +17 -13
@@ -1593,23 +1593,21 @@ EXPORT_SYMBOL(i2c_del_adapter);* @dev: The device to scan for I2C timing properties * @t: the i2c_timings struct to be filled with values * @use_defaults: bool to use sane defaults derived from the I2C specification -* when properties are not found, otherwise use 0 +* when properties are not found, otherwise don't update * * Scan the device for the generic I2C properties describing timing parameters * for the signal and fill the given struct with the results. If a property was * not found and use_defaults was true, then maximum timings are assumed which * are derived from the I2C specification. If use_defaults is not used, the -* results will be 0, so drivers can apply their own defaults later. The latter -* is mainly intended for avoiding regressions of existing drivers which want -* to switch to this function. New drivers almost always should use the defaults. +* results will be as before, so drivers can apply their own defaults before +* calling this helper. The latter is mainly intended for avoiding regressions +* of existing drivers which want to switch to this function. New drivers +* almost always should use the defaults. */ -void i2c_parse_fw_timings (struct device *dev,struct i2c_timings *t,bool use_defaults) {int ret; -memset (t,0 ,sizeof (*t)); - ret =device_property_read_u32 (dev,"clock-frequency" , &t->bus_freq_hz);if (ret && use_defaults) t->bus_freq_hz =I2C_MAX_STANDARD_MODE_FREQ ;
@@ -1632,19 +1630,25 @@ void i2c_parse_fw_timings(struct device *dev, struct i2c_timings *t, bool use_de t->scl_fall_ns =120 ; } -device_property_read_u32 (dev,"i2c-scl-internal-delay-ns" , &t->scl_int_delay_ns); + ret =device_property_read_u32 (dev,"i2c-scl-internal-delay-ns" , &t->scl_int_delay_ns); +if (ret && use_defaults) + t->scl_int_delay_ns =0 ; ret =device_property_read_u32 (dev,"i2c-sda-falling-time-ns" , &t->sda_fall_ns);if (ret && use_defaults) t->sda_fall_ns = t->scl_fall_ns; -device_property_read_u32 (dev,"i2c-sda-hold-time-ns" , &t->sda_hold_ns); + ret =device_property_read_u32 (dev,"i2c-sda-hold-time-ns" , &t->sda_hold_ns); +if (ret && use_defaults) + t->sda_hold_ns =0 ; -device_property_read_u32 (dev,"i2c-digital-filter-width-ns" , - &t->digital_filter_width_ns); + ret =device_property_read_u32 (dev,"i2c-digital-filter-width-ns" , &t->digital_filter_width_ns); +if (ret && use_defaults) + t->digital_filter_width_ns =0 ; -device_property_read_u32 (dev,"i2c-analog-filter-cutoff-frequency" , - &t->analog_filter_cutoff_freq_hz); + ret =device_property_read_u32 (dev,"i2c-analog-filter-cutoff-frequency" , &t->analog_filter_cutoff_freq_hz); +if (ret && use_defaults) + t->analog_filter_cutoff_freq_hz =0 ; }EXPORT_SYMBOL_GPL (i2c_parse_fw_timings);
Signature · 1 line
2.25.1
Re: [PATCH v3 2/6] i2c: core: Allow override timing properties with 0
drivers/i2c/busses/i2c-rcar.c static int rcar_i2c_probe(struct platform_device *pdev) · line 923
Quoted 2 lines
drivers/i2c/busses/i2c-rcar.c +1
-0+struct i2c_timings i2c_t = {0 };
Simply '... = { }'?
Re: [PATCH v3 2/6] i2c: core: Allow override timing properties with 0
Quoted 4 lines · Wolfram Sang
drivers/i2c/busses/i2c-rcar.c static int rcar_i2c_probe(struct platform_device *pdev) · line 923
Quoted 2 lines
drivers/i2c/busses/i2c-rcar.c +1
-0+struct i2c_timings i2c_t = {0 };Simply '... = { }'?
I prefer C standard over GCC extension.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: [PATCH v3 2/6] i2c: core: Allow override timing properties with 0
Quoted 7 lines · Andy Shevchenko
Quoted 4 lines · Wolfram Sang
drivers/i2c/busses/i2c-rcar.c static int rcar_i2c_probe(struct platform_device *pdev) · line 923
Quoted 2 lines
drivers/i2c/busses/i2c-rcar.c +1
-0+struct i2c_timings i2c_t = {0 };Simply '... = { }'?
I prefer C standard over GCC extension.
Okay. I don't care too much. But '{ 0 }' then, with kernel style spacing?
Re: [PATCH v3 2/6] i2c: core: Allow override timing properties with 0
Quoted 10 lines · Wolfram Sang
Quoted 7 lines · Andy Shevchenko
Quoted 4 lines · Wolfram Sang
drivers/i2c/busses/i2c-rcar.c static int rcar_i2c_probe(struct platform_device *pdev) · line 923
Quoted 2 lines
drivers/i2c/busses/i2c-rcar.c +1
-0+struct i2c_timings i2c_t = {0 };Simply '... = { }'?
I prefer C standard over GCC extension.
Okay. I don't care too much. But '{ 0 }' then, with kernel style spacing?
Works for me!
Signature · 2 lines
With Best Regards, Andy Shevchenko
PATCH v3 3/6 i2c: rcar: Consolidate timings calls in rcar_i2c_clock_calculate()
In reply to Andy ShevchenkoMove i2c_parse_fw_timings() to rcar_i2c_clock_calculate() to consolidate timings calls in one place.
While here, replace hard coded values with standard bus frequency definitions.
---
v3: new patch
drivers/i2c/busses/i2c-rcar.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/i2c/busses/i2c-rcar.c +9 -9
@@ -235,17 +235,20 @@ static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv)return i2c_recover_bus (&priv->adap); } -static int rcar_i2c_clock_calculate (struct rcar_i2c_priv *priv,struct i2c_timings *t) +static int rcar_i2c_clock_calculate (struct rcar_i2c_priv *priv) {u32 scgd, cdf, round, ick, sum, scl, cdf_width;unsigned long rate;struct device *dev =rcar_i2c_priv_to_dev (priv); +struct i2c_timings i2c_t, *t = &i2c_t;/* Fall back to previously used values if not supplied */ - t->bus_freq_hz = t->bus_freq_hz ?:100000 ; - t->scl_fall_ns = t->scl_fall_ns ?:35 ; - t->scl_rise_ns = t->scl_rise_ns ?:200 ; - t->scl_int_delay_ns = t->scl_int_delay_ns ?:50 ; + t->bus_freq_hz =I2C_MAX_STANDARD_MODE_FREQ ; + t->scl_fall_ns =35 ; + t->scl_rise_ns =200 ; + t->scl_int_delay_ns =50 ; + +i2c_parse_fw_timings (dev, &i2c_t, false);switch (priv->devtype) {case I2C_RCAR_GEN1 :
@@ -920,7 +923,6 @@ static int rcar_i2c_probe(struct platform_device *pdev)struct rcar_i2c_priv *priv;struct i2c_adapter *adap;struct device *dev = &pdev->dev; -struct i2c_timings i2c_t = {0 };int ret;/* Otherwise logic will break because some bytes must always use PIO */
@@ -957,8 +959,6 @@ static int rcar_i2c_probe(struct platform_device *pdev)i2c_set_adapdata (adap, priv);strlcpy (adap->name, pdev->name,sizeof (adap->name)); -i2c_parse_fw_timings (dev, &i2c_t, false); -/* Init DMA */ sg_init_table (&priv->sg,1 ); priv->dma_direction =DMA_NONE ;
@@ -967,7 +967,7 @@ static int rcar_i2c_probe(struct platform_device *pdev)/* Activate device for clock calculation */ pm_runtime_enable (dev);pm_runtime_get_sync (dev); - ret =rcar_i2c_clock_calculate (priv, &i2c_t); + ret =rcar_i2c_clock_calculate (priv);if (ret <0 ) goto out_pm_put;
Signature · 1 line
2.25.1
Re: [PATCH v3 3/6] i2c: rcar: Consolidate timings calls in rcar_i2c_clock_calculate()
drivers/i2c/busses/i2c-rcar.c static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv) · line 249
Quoted 12 lines
drivers/i2c/busses/i2c-rcar.c +5
-4+struct i2c_timings i2c_t, *t = &i2c_t;/* Fall back to previously used values if not supplied */ - t->bus_freq_hz = t->bus_freq_hz ?:100000 ; - t->scl_fall_ns = t->scl_fall_ns ?:35 ; - t->scl_rise_ns = t->scl_rise_ns ?:200 ; - t->scl_int_delay_ns = t->scl_int_delay_ns ?:50 ; + t->bus_freq_hz =I2C_MAX_STANDARD_MODE_FREQ ; + t->scl_fall_ns =35 ; + t->scl_rise_ns =200 ; + t->scl_int_delay_ns =50 ;
Here, the initialization to 0 is missing, so some values are broken.
Why don't we just drop the pointer and init the array directly?
struct i2c_timings t = {
.bus_freq_hz = ...
...
}Re: [PATCH v3 3/6] i2c: rcar: Consolidate timings calls in rcar_i2c_clock_calculate()
Quoted 14 lines · Wolfram Sang
drivers/i2c/busses/i2c-rcar.c static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv) · line 249
Quoted 12 lines
drivers/i2c/busses/i2c-rcar.c +5
-4+struct i2c_timings i2c_t, *t = &i2c_t;/* Fall back to previously used values if not supplied */ - t->bus_freq_hz = t->bus_freq_hz ?:100000 ; - t->scl_fall_ns = t->scl_fall_ns ?:35 ; - t->scl_rise_ns = t->scl_rise_ns ?:200 ; - t->scl_int_delay_ns = t->scl_int_delay_ns ?:50 ; + t->bus_freq_hz =I2C_MAX_STANDARD_MODE_FREQ ; + t->scl_fall_ns =35 ; + t->scl_rise_ns =200 ; + t->scl_int_delay_ns =50 ;Here, the initialization to 0 is missing, so some values are broken.
Yes, and this is fine. They are not being used. So, the idea is, whenever we pass "false" as a parameter to the function we must take care of all fields we are using.
Quoted 6 lines
Why don't we just drop the pointer and init the array directly?
struct i2c_timings t = { .bus_freq_hz = ... ... }
I can do it if you think it's better. I have no strong opinion here.
Quoted 1 line
From code prospective I guess it will be something similar anyway.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: [PATCH v3 3/6] i2c: rcar: Consolidate timings calls in rcar_i2c_clock_calculate()
Hi Andy,
Quoted 5 lines
Quoted 1 line
Here, the initialization to 0 is missing, so some values are broken.
Yes, and this is fine. They are not being used. So, the idea is, whenever we pass "false" as a parameter to the function we must take care of all fields we are using.
Can be argued. Still, uninitialized values look a little sloppy IMO. I had a patch on top of this series to print the generated values as debug output, and '0' looks much more intentional there.
Quoted 9 lines
Quoted 6 lines
Why don't we just drop the pointer and init the array directly?
struct i2c_timings t = { .bus_freq_hz = ... ... }I can do it if you think it's better. I have no strong opinion here. From code prospective I guess it will be something similar anyway.
I like it better. Easier to read in the code, no need for a seperate pointer. I can fix it locally here, though.
Thanks!
Wolfram
Re: [PATCH v3 3/6] i2c: rcar: Consolidate timings calls in rcar_i2c_clock_calculate()
Quoted 19 lines · Wolfram Sang
Hi Andy,
Quoted 5 lines
Quoted 1 line
Here, the initialization to 0 is missing, so some values are broken.
Yes, and this is fine. They are not being used. So, the idea is, whenever we pass "false" as a parameter to the function we must take care of all fields we are using.
Can be argued. Still, uninitialized values look a little sloppy IMO. I had a patch on top of this series to print the generated values as debug output, and '0' looks much more intentional there.
Quoted 7 lines
Quoted 6 lines
Why don't we just drop the pointer and init the array directly?
struct i2c_timings t = { .bus_freq_hz = ... ... }
Quoted 5 lines
Quoted 2 lines
I can do it if you think it's better. I have no strong opinion here. From code prospective I guess it will be something similar anyway.
I like it better. Easier to read in the code, no need for a seperate pointer. I can fix it locally here, though.
I already sent v4 the other day, but can update since I have got new tags to pick up.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: [PATCH v3 3/6] i2c: rcar: Consolidate timings calls in rcar_i2c_clock_calculate()
Quoted 20 lines · Andy Shevchenko
Quoted 19 lines · Wolfram Sang
Hi Andy,
Quoted 5 lines
Quoted 1 line
Here, the initialization to 0 is missing, so some values are broken.
Yes, and this is fine. They are not being used. So, the idea is, whenever we pass "false" as a parameter to the function we must take care of all fields we are using.
Can be argued. Still, uninitialized values look a little sloppy IMO. I had a patch on top of this series to print the generated values as debug output, and '0' looks much more intentional there.
Quoted 7 lines
Quoted 6 lines
Why don't we just drop the pointer and init the array directly?
struct i2c_timings t = { .bus_freq_hz = ... ... }
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
I can do it if you think it's better. I have no strong opinion here. From code prospective I guess it will be something similar anyway.
I like it better. Easier to read in the code, no need for a seperate pointer. I can fix it locally here, though.
I already sent v4 the other day, but can update since I have got new tags to pick up.
Okay, v5 is fine with me as well.
PATCH v3 4/6 i2c: stm32f7: switch to I²C generic property parsing
In reply to Andy ShevchenkoSwitch to the new generic functions: i2c_parse_fw_timings().
While here, replace hard coded values with standard bus frequency definitions.
---
v3: new patch instead of simple frequency conversion
drivers/i2c/busses/i2c-stm32f7.c | 57 +++++++++++++++----------------- 1 file changed, 26 insertions(+), 31 deletions(-)
drivers/i2c/busses/i2c-stm32f7.c +26 -31
@@ -344,9 +344,9 @@ struct stm32f7_i2c_dev {*/ static struct stm32f7_i2c_spec i2c_specs[] = { [STM32_I2C_SPEED_STANDARD ] = { - .rate =100000 , - .rate_min =80000 , - .rate_max =100000 , + .rate =I2C_MAX_STANDARD_MODE_FREQ , + .rate_min =I2C_MAX_STANDARD_MODE_FREQ *8 /10 ,/* 80% */ + .rate_max =I2C_MAX_STANDARD_MODE_FREQ , .fall_max =300 , .rise_max =1000 , .hddat_min =0 ,
@@ -356,9 +356,9 @@ static struct stm32f7_i2c_spec i2c_specs[] = { .h_min = 4000, }, [STM32_I2C_SPEED_FAST] = { - .rate = 400000, - .rate_min = 320000, - .rate_max = 400000, + .rate = I2C_MAX_FAST_MODE_FREQ, + .rate_min = I2C_MAX_FAST_MODE_FREQ * 8 / 10, /* 80% */ + .rate_max = I2C_MAX_FAST_MODE_FREQ, .fall_max = 300, .rise_max = 300, .hddat_min = 0,
@@ -368,9 +368,9 @@ static struct stm32f7_i2c_spec i2c_specs[] = { .h_min = 600, }, [STM32_I2C_SPEED_FAST_PLUS] = { - .rate = 1000000, - .rate_min = 800000, - .rate_max = 1000000, + .rate = I2C_MAX_FAST_MODE_PLUS_FREQ, + .rate_min = I2C_MAX_FAST_MODE_PLUS_FREQ * 8 / 10, /* 80% */ + .rate_max = I2C_MAX_FAST_MODE_PLUS_FREQ, .fall_max = 100, .rise_max = 120, .hddat_min = 0,
@@ -610,8 +610,25 @@ static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev,static int stm32f7_i2c_setup_timing (struct stm32f7_i2c_dev *i2c_dev,struct stm32f7_i2c_setup *setup) { +struct i2c_timings timings, *t = &timings;int ret =0 ; + t->bus_freq_hz =I2C_MAX_STANDARD_MODE_FREQ ; + t->scl_rise_ns = i2c_dev->setup.rise_time; + t->scl_fall_ns = i2c_dev->setup.fall_time; + +i2c_parse_fw_timings (&pdev->dev, t, false); + +if (t->bus_freq_hz >=I2C_MAX_FAST_MODE_PLUS_FREQ ) + i2c_dev->speed =STM32_I2C_SPEED_FAST_PLUS ; +else if (t->bus_freq_hz >=I2C_MAX_FAST_MODE_FREQ ) + i2c_dev->speed =STM32_I2C_SPEED_FAST ; +else + i2c_dev->speed =STM32_I2C_SPEED_STANDARD ; + + i2c_dev->setup.rise_time = t->scl_rise_ns; + i2c_dev->setup.fall_time = t->scl_fall_ns; + setup->speed = i2c_dev->speed; setup->speed_freq = i2c_specs[setup->speed].rate; setup->clock_src =clk_get_rate (i2c_dev->clk);
@@ -1914,7 +1931,6 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)struct stm32f7_i2c_dev *i2c_dev;const struct stm32f7_i2c_setup *setup;struct resource *res; -u32 clk_rate, rise_time, fall_time;struct i2c_adapter *adap;struct reset_control *rst;dma_addr_t phy_addr;
@@ -1961,17 +1977,6 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)return ret; } - i2c_dev->speed =STM32_I2C_SPEED_STANDARD ; - ret =device_property_read_u32 (&pdev->dev,"clock-frequency" , - &clk_rate); -if (!ret && clk_rate >=1000000 ) { - i2c_dev->speed =STM32_I2C_SPEED_FAST_PLUS ; - }else if (!ret && clk_rate >=400000 ) { - i2c_dev->speed =STM32_I2C_SPEED_FAST ; - }else if (!ret && clk_rate >=100000 ) { - i2c_dev->speed =STM32_I2C_SPEED_STANDARD ; - } - rst =devm_reset_control_get (&pdev->dev,NULL );if (IS_ERR (rst)) {dev_err (&pdev->dev,"Error: Missing controller reset\n" );
@@ -2011,16 +2016,6 @@ static int stm32f7_i2c_probe(struct platform_device *pdev) } i2c_dev->setup = *setup; - ret =device_property_read_u32 (i2c_dev->dev,"i2c-scl-rising-time-ns" , - &rise_time); -if (!ret) - i2c_dev->setup.rise_time = rise_time; - - ret =device_property_read_u32 (i2c_dev->dev,"i2c-scl-falling-time-ns" , - &fall_time); -if (!ret) - i2c_dev->setup.fall_time = fall_time; - ret =stm32f7_i2c_setup_timing (i2c_dev, &i2c_dev->setup);if (ret) goto clk_free;
Signature · 1 line
2.25.1
Re: [PATCH v3 4/6] i2c: stm32f7: switch to I²C generic property parsing
Quoted 58 lines · Andy Shevchenko
Switch to the new generic functions:
i2c_parse_fw_timings().While here, replace hard coded values with standard bus frequency definitions.
Cc Pierre-Yves MORDRET <[email protected]>Cc Maxime Coquelin <[email protected]>Cc Alexandre Torgue <[email protected]>Signed-off-by Andy Shevchenko <[email protected]>---
v3: new patch instead of simple frequency conversiondrivers/i2c/busses/i2c-stm32f7.c | 57 +++++++++++++++----------------- 1 file changed, 26 insertions(+), 31 deletions(-)drivers/i2c/busses/i2c-stm32f7.c +9
-9@@ -344,9 +344,9 @@ struct stm32f7_i2c_dev {*/ static struct stm32f7_i2c_spec i2c_specs[] = { [STM32_I2C_SPEED_STANDARD ] = { - .rate =100000 , - .rate_min =80000 , - .rate_max =100000 , + .rate =I2C_MAX_STANDARD_MODE_FREQ , + .rate_min =I2C_MAX_STANDARD_MODE_FREQ *8 /10 ,/* 80% */ + .rate_max =I2C_MAX_STANDARD_MODE_FREQ , .fall_max =300 , .rise_max =1000 , .hddat_min =0 ,@@ -356,9 +356,9 @@ static struct stm32f7_i2c_spec i2c_specs[] = { .h_min = 4000, }, [STM32_I2C_SPEED_FAST] = { - .rate = 400000, - .rate_min = 320000, - .rate_max = 400000, + .rate = I2C_MAX_FAST_MODE_FREQ, + .rate_min = I2C_MAX_FAST_MODE_FREQ * 8 / 10, /* 80% */ + .rate_max = I2C_MAX_FAST_MODE_FREQ, .fall_max = 300, .rise_max = 300, .hddat_min = 0,@@ -368,9 +368,9 @@ static struct stm32f7_i2c_spec i2c_specs[] = { .h_min = 600, }, [STM32_I2C_SPEED_FAST_PLUS] = { - .rate = 1000000, - .rate_min = 800000, - .rate_max = 1000000, + .rate = I2C_MAX_FAST_MODE_PLUS_FREQ, + .rate_min = I2C_MAX_FAST_MODE_PLUS_FREQ * 8 / 10, /* 80% */ + .rate_max = I2C_MAX_FAST_MODE_PLUS_FREQ, .fall_max = 100, .rise_max = 120, .hddat_min = 0,@@ -610,8 +610,25 @@ static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev, static int stm32f7_i2c_setup_timing(struct stm32f7_i2c_dev *i2c_dev,
drivers/i2c/busses/i2c-stm32f7.c static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev, · line 620
Quoted 10 lines
drivers/i2c/busses/i2c-stm32f7.c +6
-0struct stm32f7_i2c_setup *setup) { +struct i2c_timings timings, *t = &timings;int ret =0 ; + t->bus_freq_hz =I2C_MAX_STANDARD_MODE_FREQ ; + t->scl_rise_ns = i2c_dev->setup.rise_time; + t->scl_fall_ns = i2c_dev->setup.fall_time; + +i2c_parse_fw_timings (&pdev->dev, t, false);
Andy, thanks for the patch.
Looks fine overall, apart from the above line which should be
i2c_parse_fw_timings(i2c_dev->dev, t, false);
Quoted 60 lines
drivers/i2c/busses/i2c-stm32f7.c +11
-22+ +if (t->bus_freq_hz >=I2C_MAX_FAST_MODE_PLUS_FREQ ) + i2c_dev->speed =STM32_I2C_SPEED_FAST_PLUS ; +else if (t->bus_freq_hz >=I2C_MAX_FAST_MODE_FREQ ) + i2c_dev->speed =STM32_I2C_SPEED_FAST ; +else + i2c_dev->speed =STM32_I2C_SPEED_STANDARD ; + + i2c_dev->setup.rise_time = t->scl_rise_ns; + i2c_dev->setup.fall_time = t->scl_fall_ns; + setup->speed = i2c_dev->speed; setup->speed_freq = i2c_specs[setup->speed].rate; setup->clock_src =clk_get_rate (i2c_dev->clk);@@ -1914,7 +1931,6 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)struct stm32f7_i2c_dev *i2c_dev;const struct stm32f7_i2c_setup *setup;struct resource *res; -u32 clk_rate, rise_time, fall_time;struct i2c_adapter *adap;struct reset_control *rst;dma_addr_t phy_addr;@@ -1961,17 +1977,6 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)return ret; } - i2c_dev->speed =STM32_I2C_SPEED_STANDARD ; - ret =device_property_read_u32 (&pdev->dev,"clock-frequency" , - &clk_rate); -if (!ret && clk_rate >=1000000 ) { - i2c_dev->speed =STM32_I2C_SPEED_FAST_PLUS ; - }else if (!ret && clk_rate >=400000 ) { - i2c_dev->speed =STM32_I2C_SPEED_FAST ; - }else if (!ret && clk_rate >=100000 ) { - i2c_dev->speed =STM32_I2C_SPEED_STANDARD ; - } - rst =devm_reset_control_get (&pdev->dev,NULL );if (IS_ERR (rst)) {dev_err (&pdev->dev,"Error: Missing controller reset\n" );@@ -2011,16 +2016,6 @@ static int stm32f7_i2c_probe(struct platform_device *pdev) } i2c_dev->setup = *setup; - ret =device_property_read_u32 (i2c_dev->dev,"i2c-scl-rising-time-ns" , - &rise_time); -if (!ret) - i2c_dev->setup.rise_time = rise_time; - - ret =device_property_read_u32 (i2c_dev->dev,"i2c-scl-falling-time-ns" , - &fall_time); -if (!ret) - i2c_dev->setup.fall_time = fall_time; - ret =stm32f7_i2c_setup_timing (i2c_dev, &i2c_dev->setup);if (ret) goto clk_free;Signature · 1 line
2.25.1
Re: [PATCH v3 4/6] i2c: stm32f7: switch to I²C generic property parsing
Quoted 4 lines · Alain Volmat
Quoted 3 lines · Andy Shevchenko
Switch to the new generic functions:
i2c_parse_fw_timings().While here, replace hard coded values with standard bus frequency definitions.
...
Quoted 10 lines
drivers/i2c/busses/i2c-stm32f7.c static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev, · line 620
Quoted 5 lines
static int stm32f7_i2c_setup_timing(struct
stm32f7_i2c_dev*i2c_dev,drivers/i2c/busses/i2c-stm32f7.c +1
-0struct stm32f7_i2c_setup *setup) { +i2c_parse_fw_timings (&pdev->dev, t, false);Andy, thanks for the patch.
Looks fine overall, apart from the above line which should bei2c_parse_fw_timings(i2c_dev->dev, t, false);
Oh, good catch!
If I read the code correctly it's an equivalent, but I see that we don't supply pdev.
I will fix it for v4.
Signature · 2 lines
With Best Regards, Andy Shevchenko
PATCH v3 5/6 i2c: algo: Use generic definitions for bus frequencies
In reply to Andy ShevchenkoSince we have generic definitions for bus frequencies, let's use them.
---
v3: no changes
drivers/i2c/algos/i2c-algo-pca.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/i2c/algos/i2c-algo-pca.c +3 -3
@@ -459,17 +459,17 @@ static int pca_init(struct i2c_adapter *adap)/* To avoid integer overflow, use clock/100 for calculations */ clock =pca_clock (pca_data) /100 ; -if (pca_data->i2c_clock >1000000 ) { +if (pca_data->i2c_clock >I2C_MAX_FAST_MODE_PLUS_FREQ ) { mode =I2C_PCA_MODE_TURBO ; min_tlow =14 ; min_thi =5 ; raise_fall_time =22 ;/* Raise 11e-8s, Fall 11e-8s */ - }else if (pca_data->i2c_clock >400000 ) { + }else if (pca_data->i2c_clock >I2C_MAX_FAST_MODE_FREQ ) { mode =I2C_PCA_MODE_FASTP ; min_tlow =17 ; min_thi =9 ; raise_fall_time =22 ;/* Raise 11e-8s, Fall 11e-8s */ - }else if (pca_data->i2c_clock >100000 ) { + }else if (pca_data->i2c_clock >I2C_MAX_STANDARD_MODE_FREQ ) { mode =I2C_PCA_MODE_FAST ; min_tlow =44 ; min_thi =20 ;
Signature · 1 line
2.25.1
Quoted 7 lines · Andy Shevchenko
There are few maximum bus frequencies being used in the I²C core code. Provide generic definitions for bus frequencies and use them in the core.
The drivers may use predefined constants where it is appropriate. Some of them are already using these under slightly different names. We will convert them later to use newly introduced defines.
Quoted 5 lines
Note, the name of modes are chosen to follow well established naming scheme [1].
These definitions will also help to avoid typos in the numbers that may lead to subtle errors.
Wolfram, is any chance to get applied at least 1, 5 and 6 from this series?
Quoted 77 lines
[1]: https://en.wikipedia.org/wiki/I%C2%B2C#Differences_between_modes
Acked-by Mika Westerberg <[email protected]>Signed-off-by Andy Shevchenko <[email protected]>---
v3: added link to Wiki to point the mode naming scheme outdrivers/i2c/i2c-core-acpi.c | 2 +- drivers/i2c/i2c-core-base.c | 8 ++++---- include/linux/i2c.h | 8 ++++++++ 3 files changed, 13 insertions(+), 5 deletions(-)drivers/i2c/i2c-core-acpi.c +1
-1@@ -318,7 +318,7 @@ static acpi_status i2c_acpi_lookup_speed(acpi_handle handle, u32 level, lookup->min_speed = lookup->speed;if (acpi_match_device_ids (adev, i2c_acpi_force_400khz_device_ids) ==0 ) - lookup->force_speed =400000 ; + lookup->force_speed =I2C_MAX_FAST_MODE_FREQ ;return AE_OK ; }drivers/i2c/i2c-core-base.c +4
-4@@ -1612,13 +1612,13 @@ void i2c_parse_fw_timings(struct device *dev, struct i2c_timings *t, bool use_de ret =device_property_read_u32 (dev,"clock-frequency" , &t->bus_freq_hz);if (ret && use_defaults) - t->bus_freq_hz =100000 ; + t->bus_freq_hz =I2C_MAX_STANDARD_MODE_FREQ ; ret =device_property_read_u32 (dev,"i2c-scl-rising-time-ns" , &t->scl_rise_ns);if (ret && use_defaults) { -if (t->bus_freq_hz <=100000 ) +if (t->bus_freq_hz <=I2C_MAX_STANDARD_MODE_FREQ ) t->scl_rise_ns =1000 ; -else if (t->bus_freq_hz <=400000 ) +else if (t->bus_freq_hz <=I2C_MAX_FAST_MODE_FREQ ) t->scl_rise_ns =300 ;else t->scl_rise_ns =120 ;@@ -1626,7 +1626,7 @@ void i2c_parse_fw_timings(struct device *dev, struct i2c_timings *t, bool use_de ret =device_property_read_u32 (dev,"i2c-scl-falling-time-ns" , &t->scl_fall_ns);if (ret && use_defaults) { -if (t->bus_freq_hz <=400000 ) +if (t->bus_freq_hz <=I2C_MAX_FAST_MODE_FREQ ) t->scl_fall_ns =300 ;else t->scl_fall_ns =120 ;include/linux/i2c.h +8
-0@@ -39,6 +39,14 @@ enum i2c_slave_event;typedef int (*i2c_slave_cb_t )(struct i2c_client *client,enum i2c_slave_event event,u8 *val); +/* I2C Frequency Modes */ +#define I2C_MAX_STANDARD_MODE_FREQ 100000 +#define I2C_MAX_FAST_MODE_FREQ 400000 +#define I2C_MAX_FAST_MODE_PLUS_FREQ 1000000 +#define I2C_MAX_TURBO_MODE_FREQ 1400000 +#define I2C_MAX_HIGH_SPEED_MODE_FREQ 3400000 +#define I2C_MAX_ULTRA_FAST_MODE_FREQ 5000000 +struct module ;struct property_entry ;Signature · 1 line
2.25.1
Signature · 2 lines
With Best Regards, Andy Shevchenko
Quoted 8 lines · Andy Shevchenko
Quoted 7 lines · Andy Shevchenko
There are few maximum bus frequencies being used in the I²C core code. Provide generic definitions for bus frequencies and use them in the core.
The drivers may use predefined constants where it is appropriate. Some of them are already using these under slightly different names. We will convert them later to use newly introduced defines.
Quoted 7 lines
Quoted 5 lines
Note, the name of modes are chosen to follow well established naming scheme [1].
These definitions will also help to avoid typos in the numbers that may lead to subtle errors.
Wolfram, is any chance to get applied at least 1, 5 and 6 from this series?
Yes, just make sure v4 is based on i2c/for-next to minimize merge conflicts.
Quoted 12 lines · Wolfram Sang
Quoted 11 lines · Andy Shevchenko
Quoted 10 lines · Andy Shevchenko
There are few maximum bus frequencies being used in the I²C core code. Provide generic definitions for bus frequencies and use them in the core.
The drivers may use predefined constants where it is appropriate. Some of them are already using these under slightly different names. We will convert them later to use newly introduced defines.
Note, the name of modes are chosen to follow well established naming scheme [1].
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
These definitions will also help to avoid typos in the numbers that may lead to subtle errors.
Wolfram, is any chance to get applied at least 1, 5 and 6 from this series?
Yes, just make sure v4 is based on i2c/for-next to minimize merge conflicts.
Will do, thank you!
Signature · 2 lines
With Best Regards, Andy Shevchenko
A message that is not in the archive (sent off-list or not yet received): [email protected]
Dmitry Osipenko
Reviewed-byRe: [PATCH v3 6/6] i2c: drivers: Use generic definitions for bus frequencies
16.03.2020 18:49, Andy Shevchenko пишет:
Quoted 1 line
Since we have generic definitions for bus frequencies, let's use them.
...
drivers/i2c/busses/i2c-tegra.c line 128
Quoted 11 lines
drivers/i2c/busses/i2c-tegra.c +0
-3@@ -123,10 +123,6 @@#define I2C_THIGH_SHIFT 8#define I2C_INTERFACE_TIMING_1 0x98 -#define I2C_STANDARD_MODE 100000 -#define I2C_FAST_MODE 400000 -#define I2C_FAST_PLUS_MODE 1000000
...
For NVIDIA Tegra I2C: