Switching among serial consoles
Hi,
long time ago I was playing with switching among consoles. I have two IPs with the same driver where main console is probed and used which is visible via dm tree.
serial 1 [ + ] serial_zynq | |-- serial at ff000000 serial 2 [ ] serial_zynq | |-- serial at ff010000
then I have also dcc which can be also used as a console
serial 0 [ ] arm_dcc |-- dcc
Lastly I have enabled netconsole feature.
I have no problem to switch between serial at ff000000 and nc but I can't switch it to dcc or second instance.
dhcp
setenv ncip 192.168.0.105
setenv nc 'setenv stdout nc;setenv stdin nc'
setenv dcc 'setenv stdout dcc;setenv stdin dcc'
setenv serial0 'setenv stdout serial at ff000000;setenv stdin serial at ff000000' setenv serial1 'setenv stdout serial at ff010000;setenv stdin serial at ff010000' run nc
and then via netconsole
run serial0
works to get back.
Console info is showing only available and registered instances.
ZynqMP> con
List of available devices:
serial at ff000000 00000007 IO
serial 00000003 IO stdin stdout stderr nulldev 00000003 IO nc 00000003 IO
It means the question is how to probe second instance of serial_zynq serial at ff010000 and dcc. I expect when probe is done it will show up in console list and switch is possible.
I found SERIAL_SEARCH_ALL symbol but it is just search not probe.
I am quite sure that it was working in past but not sure if this was before DM but I would like to know how you are doing it/testing it today.
Thanks,
Michal
Quoted 42 lines · Michal Simek
Hi,
long time ago I was playing with switching among consoles. I have two IPs with the same driver where main console is probed and used which is visible via dm tree.
serial 1 [ + ] serial_zynq | |-- serial at ff000000 serial 2 [ ] serial_zynq | |-- serial at ff010000then I have also dcc which can be also used as a console
serial 0 [ ]
arm_dcc|-- dccLastly I have enabled netconsole feature.
I have no problem to switch between serial at
ff000000and nc but I can't switch it to dcc or second instance.dhcp
setenv ncip 192.168.0.105
setenv nc 'setenv stdout nc;setenv stdin nc'
setenv dcc 'setenv stdout dcc;setenv stdin dcc'
setenv serial0 'setenv stdout serial at ff000000;setenv stdin serial atff000000' setenv serial1 'setenv stdout serial at ff010000;setenv stdin serial atff010000' run ncand then via netconsole
run serial0
works to get back.
Console info is showing only available and registered instances.
ZynqMP> con
List of available devices:
serial atff00000000000007 IOserial 00000003 IO stdin stdout stderr nulldev 00000003 IO nc 00000003 IO
Quoted 8 lines
It means the question is how to probe second instance of
serial_zynqserial atff010000and dcc. I expect when probe is done it will show up in console list and switch is possible.I found
SERIAL_SEARCH_ALLsymbol but it is just search not probe.I am quite sure that it was working in past but not sure if this was before DM but I would like to know how you are doing it/testing it today.
I think the answer is we don't have any tests for multiple consoles to start with, so it's not tested. I'd start by grabbing an old platform and bisect'ing back the years to see when it did last work as the first thing. Sorry!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200320/b5ba9701/attachment.sig>
Hi,
Quoted 50 lines · Tom Rini
Quoted 48 lines · Michal Simek
Hi,
long time ago I was playing with switching among consoles. I have two IPs with the same driver where main console is probed and used which is visible via dm tree.
serial 1 [ + ] serial_zynq | |-- serial at ff000000 serial 2 [ ] serial_zynq | |-- serial at ff010000then I have also dcc which can be also used as a console
serial 0 [ ]
arm_dcc|-- dccLastly I have enabled netconsole feature.
I have no problem to switch between serial at
ff000000and nc but I can't switch it to dcc or second instance.dhcp
setenv ncip 192.168.0.105
setenv nc 'setenv stdout nc;setenv stdin nc'
setenv dcc 'setenv stdout dcc;setenv stdin dcc'
setenv serial0 'setenv stdout serial at ff000000;setenv stdin serial atff000000' setenv serial1 'setenv stdout serial at ff010000;setenv stdin serial atff010000' run ncand then via netconsole
run serial0
works to get back.
Console info is showing only available and registered instances.
ZynqMP> con
List of available devices:
serial atff00000000000007 IOserial 00000003 IO stdin stdout stderr nulldev 00000003 IO nc 00000003 IOIt means the question is how to probe second instance of
serial_zynqserial atff010000and dcc. I expect when probe is done it will show up in console list and switch is possible.I found
SERIAL_SEARCH_ALLsymbol but it is just search not probe.
Quoted 7 lines
Quoted 2 lines
I am quite sure that it was working in past but not sure if this was before DM but I would like to know how you are doing it/testing it today.
I think the answer is we don't have any tests for multiple consoles to start with, so it's not tested. I'd start by grabbing an old platform and bisect'ing back the years to see when it did last work as the first thing. Sorry!
Note there is special logic in stdio_get_by_name() for vidconsole (so when you say 'setenv stdout vidconsole' it probes the video). It might need another look, or need to be generalised.
Regards,
Simon