unbound: new package
PATCH 1/1 unbound: new package
Unbound: validating, recursive & caching DNS resolver with DNSSEC, QNAME minimisation, DNSCrypt and DNS-over-TLS support.
Patch based on an earlier patch by Stefan Fr?berg
--- DEVELOPERS | 3 ++ package/Config.in | 1 + package/unbound/Config.in | 35 ++++++++++++++++++++++ package/unbound/S70unbound | 26 ++++++++++++++++ package/unbound/unbound.hash | 3 ++ package/unbound/unbound.mk | 57 ++++++++++++++++++++++++++++++++++++ 6 files changed, 125 insertions(+) create mode 100644 package/unbound/Config.in create mode 100755 package/unbound/S70unbound create mode 100644 package/unbound/unbound.hash create mode 100644 package/unbound/unbound.mk
DEVELOPERS +3 -0
@@ -2338,6 +2338,9 @@ F: package/libvpx/ F: package/mesa3d-demos/ F: package/ti-gfx/ +N: Stefan Ott <[email protected]> +F: package/unbound/ + N: Stefan S?rensen <[email protected]> F: package/cracklib/ F: package/libpwquality/
package/Config.in +1 -0
@@ -2193,6 +2193,7 @@ endif source "package/uftp/Config.in" source "package/uhttpd/Config.in" source "package/ulogd/Config.in" + source "package/unbound/Config.in" source "package/ushare/Config.in" source "package/ussp-push/Config.in" source "package/vde2/Config.in"
package/unbound/Config.in new file +35 -0
@@ -0,0 +1,35 @@ +config BR2_PACKAGE_UNBOUND + bool "unbound" + select BR2_PACKAGE_EXPAT + select BR2_PACKAGE_LIBEVENT + select BR2_PACKAGE_OPENSSL + help + Unbound is a validating, recursive, and caching DNS resolver. + It supports DNSSEC, QNAME minimisation, DNS-over-TLS and + DNSCrypt. + + https://www.unbound.net + +if BR2_PACKAGE_UNBOUND + config BR2_PACKAGE_UNBOUND_DNSCRYPT + bool "Enable DNSCrypt" + select BR2_PACKAGE_LIBSODIUM + help + DNSCrypt wraps unmodified DNS queries between a client and + a DNS resolver. Default port used is 443 and like with + normal unencrypted DNS, it uses UDP first and falling back + to TCP if response too large. + + There is also DNS-over-TLS, a TCP only version + of proposed standard for DNS encryption (RFC 7858). + Default port for DNS-over-TLS is 853 and Unbound has + built-in support for it. + + https://tools.ietf.org/html/rfc7858 + + Note: Neither DNSCrypt or DNS-over-TLS encrypt the SNI. + Here is some suggestions how to handle SNI encryption: + + https://tools.ietf.org/html/draft-ietf-tls-sni-encryption-00 + +endif
package/unbound/S70unbound new file +26 -0
@@ -0,0 +1,26 @@ +#!/bin/sh + +[ -f /etc/unbound/unbound.conf ] || exit 0 + +case "$1" in + start) + printf "Starting unbound DNS server: " + start-stop-daemon -S -x /usr/sbin/unbound + [ $? = 0 ] && echo "OK" || echo "FAIL" + ;; + stop) + printf "Stopping unbound DNS server: " + start-stop-daemon -K -q -x /usr/sbin/unbound + [ $? = 0 ] && echo "OK" || echo "FAIL" + ;; + restart|reload) + $0 stop + sleep 1 + $0 start + ;; + *) + echo "Usage: $0 {start|stop|restart}" + exit 1 +esac + +exit 0
package/unbound/unbound.hash new file +3 -0
@@ -0,0 +1,3 @@ +# Locally calculated +sha256 152f486578242fe5c36e89995d0440b78d64c05123990aae16246b7f776ce955 unbound-1.10.0.tar.gz +sha256 8eb9a16cbfb8703090bbfa3a2028fd46bb351509a2f90dc1001e51fbe6fd45db LICENSE
package/unbound/unbound.mk new file +57 -0
57 lines not on this page · raw message
Signature · 1 line
2.25.2
PATCH 1/1 unbound: new package
Hi Stefan,
Quoted 53 lines · Stefan Ott
Unbound: validating, recursive & caching DNS resolver with DNSSEC, QNAME minimisation, DNSCrypt and DNS-over-TLS support.
Patch based on an earlier patch by Stefan Fr?berg
Signed-off-by Stefan Ott <[email protected]>--- DEVELOPERS | 3 ++ package/Config.in | 1 + package/unbound/Config.in | 35 ++++++++++++++++++++++ package/unbound/S70unbound | 26 ++++++++++++++++ package/unbound/unbound.hash | 3 ++ package/unbound/unbound.mk | 57 ++++++++++++++++++++++++++++++++++++ 6 files changed, 125 insertions(+) create mode 100644 package/unbound/Config.in create mode 100755 package/unbound/S70unbound create mode 100644 package/unbound/unbound.hash create mode 100644 package/unbound/unbound.mkDEVELOPERS +3
-0@@ -2338,6 +2338,9 @@ F: package/libvpx/ F: package/mesa3d-demos/ F: package/ti-gfx/ +N: Stefan Ott <[email protected]> +F: package/unbound/ + N: Stefan S?rensen <[email protected]> F: package/cracklib/ F: package/libpwquality/package/Config.in +1
-0@@ -2193,6 +2193,7 @@ endif source "package/uftp/Config.in" source "package/uhttpd/Config.in" source "package/ulogd/Config.in" + source "package/unbound/Config.in" source "package/ushare/Config.in" source "package/ussp-push/Config.in" source "package/vde2/Config.in"package/unbound/Config.in new file +1
-0@@ -0,0 +1,35 @@ +config BR2_PACKAGE_UNBOUND
package/unbound/Config.in line 11
Quoted 10 lines
package/unbound/Config.in new file +10
-0+ bool "unbound" + select BR2_PACKAGE_EXPAT + select BR2_PACKAGE_LIBEVENT + select BR2_PACKAGE_OPENSSL + help + Unbound is a validating, recursive, and caching DNS resolver. + It supports DNSSEC, QNAME minimisation, DNS-over-TLS and + DNSCrypt. + + https://www.unbound.net
Looks like you have two tabs instead of one tab and two spaces.
Quoted 12 lines
package/unbound/Config.in new file +12
-0+ +if BR2_PACKAGE_UNBOUND + config BR2_PACKAGE_UNBOUND_DNSCRYPT + bool "Enable DNSCrypt" + select BR2_PACKAGE_LIBSODIUM + help + DNSCrypt wraps unmodified DNS queries between a client and + a DNS resolver. Default port used is 443 and like with + normal unencrypted DNS, it uses UDP first and falling back + to TCP if response too large. + + There is also DNS-over-TLS, a TCP only version
package/unbound/Config.in line 33
Quoted 10 lines
package/unbound/Config.in new file +10
-0+ of proposed standard for DNS encryption (RFC 7858). + Default port for DNS-over-TLS is 853 and Unbound has + built-in support for it. + + https://tools.ietf.org/html/rfc7858 + + Note: Neither DNSCrypt or DNS-over-TLS encrypt the SNI. + Here is some suggestions how to handle SNI encryption: + + https://tools.ietf.org/html/draft-ietf-tls-sni-encryption-00
same here.
Yegor
Quoted 113 lines
package/unbound/Config.in new file +2
-0+ +endifpackage/unbound/S70unbound new file +26
-0@@ -0,0 +1,26 @@ +#!/bin/sh + +[ -f /etc/unbound/unbound.conf ] || exit 0 + +case "$1" in + start) + printf "Starting unbound DNS server: " + start-stop-daemon -S -x /usr/sbin/unbound + [ $? = 0 ] && echo "OK" || echo "FAIL" + ;; + stop) + printf "Stopping unbound DNS server: " + start-stop-daemon -K -q -x /usr/sbin/unbound + [ $? = 0 ] && echo "OK" || echo "FAIL" + ;; + restart|reload) + $0 stop + sleep 1 + $0 start + ;; + *) + echo "Usage: $0 {start|stop|restart}" + exit 1 +esac + +exit 0package/unbound/unbound.hash new file +3
-0@@ -0,0 +1,3 @@ +# Locally calculated +sha256 152f486578242fe5c36e89995d0440b78d64c05123990aae16246b7f776ce955 unbound-1.10.0.tar.gz +sha256 8eb9a16cbfb8703090bbfa3a2028fd46bb351509a2f90dc1001e51fbe6fd45db LICENSEpackage/unbound/unbound.mk new file +57
-1@@ -0,0 +1,57 @@ +################################################################################ +# +# unbound +# +################################################################################ + +UNBOUND_VERSION = 1.10.0 +UNBOUND_SITE = https://www.unbound.net/downloads +UNBOUND_DEPENDENCIES = host-pkgconf expat libevent openssl +UNBOUND_LICENSE = BSD-3-Clause +UNBOUND_LICENSE_FILES = LICENSE +UNBOUND_CONF_OPTS += \ + --disable-rpath \ + --disable-debug \ + --with-conf-file=/etc/unbound/unbound.conf \ + --with-pidfile=/var/run/unbound.pid \ + --with-rootkey-file=/etc/unbound/root.key \ + --enable-tfo-server \ + --enable-relro-now \ + --with-pic \ + --enable-pie \ + --with-ssl=$(STAGING_DIR)/usr + +# uClibc-ng does not have MSG_FASTOPEN +# so TCP Fast Open client mode disabled for it +ifeq ($(BR2_TOOLCHAIN_USES_UCLIBC),y) +UNBOUND_CONF_OPTS += --disable-tfo-client +else +UNBOUND_CONF_OPTS += --enable-tfo-client +endif + +ifeq ($(BR2_TOOLCHAIN_HAS_THREADS),y) +UNBOUND_CONF_OPTS += --with-pthreads +else +UNBOUND_CONF_OPTS += --without-pthreads +endif + +ifeq ($(BR2_GCC_ENABLE_LTO),y) +UNBOUND_CONF_OPTS += --enable-flto +else +UNBOUND_CONF_OPTS += --disable-flto +endif + +ifeq ($(BR2_PACKAGE_UNBOUND_DNSCRYPT),y) +UNBOUND_CONF_OPTS += --enable-dnscrypt +UNBOUND_DEPENDENCIES += libsodium +else +UNBOUND_CONF_OPTS += --disable-dnscrypt +endif + +define UNBOUND_INSTALL_INIT_SYSV + $(INSTALL) -D -m 755 package/unbound/S70unbound \ + $(TARGET_DIR)/etc/init.d/S70unbound +endef + +$(eval $(autotools-package)) + --2.25.2
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
PATCH 1/1 unbound: new package
Hi Yegor
Thanks for your feedback.
Quoted 30 lines · Yegor Yefremov
package/unbound/Config.in line 11
Quoted 12 lines
package/unbound/Config.in new file +11
-0+config BR2_PACKAGE_UNBOUND + bool "unbound" + select BR2_PACKAGE_EXPAT + select BR2_PACKAGE_LIBEVENT + select BR2_PACKAGE_OPENSSL + help + Unbound is a validating, recursive, and caching DNS resolver. + It supports DNSSEC, QNAME minimisation, DNS-over-TLS and + DNSCrypt. + + https://www.unbound.netLooks like you have two tabs instead of one tab and two spaces.
Quoted 15 lines
package/unbound/Config.in new file +15
-0+if BR2_PACKAGE_UNBOUND + config BR2_PACKAGE_UNBOUND_DNSCRYPT + bool "Enable DNSCrypt" + select BR2_PACKAGE_LIBSODIUM + help + DNSCrypt wraps unmodified DNS queries between a client and + a DNS resolver. Default port used is 443 and like with + normal unencrypted DNS, it uses UDP first and falling back + to TCP if response too large. + + There is also DNS-over-TLS, a TCP only version + of proposed standard for DNS encryption (RFC 7858). + Default port for DNS-over-TLS is 853 and Unbound has + built-in support for it. +
Quoted 8 lines
package/unbound/Config.in line 33
Quoted 6 lines
package/unbound/Config.in new file +6
-0+ https://tools.ietf.org/html/rfc7858 + + Note: Neither DNSCrypt or DNS-over-TLS encrypt the SNI. + Here is some suggestions how to handle SNI encryption: + + https://tools.ietf.org/html/draft-ietf-tls-sni-encryption-00same here.
Ah yes, I had missed that in the manual. Patch v2 should be with the proper indentation, thanks for pointing it out.
Signature · 2 lines
Stefan Ott https://www.ott.net/
PATCH 1/1 unbound: new package
In reply to Stefan OttHello Stefan,
Thanks for your patch, here are some more comments, on top of what Yegor already reported.
Quoted 13 lines · On Sat, 21 Mar 2020 01:57:06 +0100 Stefan Ott <[email protected]> wrote:
package/unbound/Config.in new file +7
-0@@ -0,0 +1,35 @@ +config BR2_PACKAGE_UNBOUND + bool "unbound" + select BR2_PACKAGE_EXPAT + select BR2_PACKAGE_LIBEVENT + select BR2_PACKAGE_OPENSSL + help + Unbound is a validating, recursive, and caching DNS resolver.
package/unbound/Config.in line 17
Quoted 10 lines
package/unbound/Config.in new file +10
-0+ It supports DNSSEC, QNAME minimisation, DNS-over-TLS and + DNSCrypt. + + https://www.unbound.net + +if BR2_PACKAGE_UNBOUND + config BR2_PACKAGE_UNBOUND_DNSCRYPT + bool "Enable DNSCrypt" + select BR2_PACKAGE_LIBSODIUM + help
Sub-options should not be indented. Also, we normally don't capitalize options, so "enable DNSCrypt" would be more appropriate here.
Side note: it is "interesting" to see that unbound unconditionally uses one crypto library (openssl), and then requires another crypto library (libsodium) for dnscrypt support. Kind of strange.
package/unbound/S70unbound
Quoted 5 lines
package/unbound/S70unbound new file +0
-0
Could you rework your init script to be modeled after the template in package/busybox/S01syslogd ? We are trying to unify our init scripts so that they are as similar as possible to each other.
Quoted 8 lines
package/unbound/unbound.mk new file +2
-0@@ -0,0 +1,57 @@ +################################################################################ +#
package/unbound/unbound.mk line 12
Quoted 10 lines
package/unbound/unbound.mk new file +10
-0+# unbound +# +################################################################################ + +UNBOUND_VERSION = 1.10.0 +UNBOUND_SITE = https://www.unbound.net/downloads +UNBOUND_DEPENDENCIES = host-pkgconf expat libevent openssl +UNBOUND_LICENSE = BSD-3-Clause +UNBOUND_LICENSE_FILES = LICENSE +UNBOUND_CONF_OPTS += \
The += here can be just =
package/unbound/unbound.mk line 19
Quoted 7 lines
package/unbound/unbound.mk new file +7
-0+ --disable-rpath \ + --disable-debug \ + --with-conf-file=/etc/unbound/unbound.conf \ + --with-pidfile=/var/run/unbound.pid \ + --with-rootkey-file=/etc/unbound/root.key \ + --enable-tfo-server \ + --enable-relro-now \
relro-now support is enabled system-wide using BR2_RELRO_PARTIAL / BR2_RELRO_FULL, so individual packages should not enable it.
package/unbound/unbound.mk line 21
Quoted 2 lines
package/unbound/unbound.mk new file +2
-0+ --with-pic \ + --enable-pie \
Are these needed ?
Otherwise, looks good. Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH 1/1 unbound: new package
In reply to Stefan OttStefan, All,
On 2020-03-21 01:57 +0100, Stefan Ott spake thusly:
Quoted 6 lines
Unbound: validating, recursive & caching DNS resolver with DNSSEC, QNAME minimisation, DNSCrypt and DNS-over-TLS support.
Patch based on an earlier patch by Stefan Fr?berg
Signed-off-by Stefan Ott <[email protected]>
In addition to the review by Yegor and Thomas, and as discussed on IRC the other day: unbound at least requires threads, probably even NPTL.
Regards,
Yann E. MORIN.
Quoted 191 lines
--- DEVELOPERS | 3 ++ package/Config.in | 1 + package/unbound/Config.in | 35 ++++++++++++++++++++++ package/unbound/S70unbound | 26 ++++++++++++++++ package/unbound/unbound.hash | 3 ++ package/unbound/unbound.mk | 57 ++++++++++++++++++++++++++++++++++++ 6 files changed, 125 insertions(+) create mode 100644 package/unbound/Config.in create mode 100755 package/unbound/S70unbound create mode 100644 package/unbound/unbound.hash create mode 100644 package/unbound/unbound.mkDEVELOPERS +3
-0@@ -2338,6 +2338,9 @@ F: package/libvpx/ F: package/mesa3d-demos/ F: package/ti-gfx/ +N: Stefan Ott <[email protected]> +F: package/unbound/ + N: Stefan S?rensen <[email protected]> F: package/cracklib/ F: package/libpwquality/package/Config.in +1
-0@@ -2193,6 +2193,7 @@ endif source "package/uftp/Config.in" source "package/uhttpd/Config.in" source "package/ulogd/Config.in" + source "package/unbound/Config.in" source "package/ushare/Config.in" source "package/ussp-push/Config.in" source "package/vde2/Config.in"package/unbound/Config.in new file +35
-0@@ -0,0 +1,35 @@ +config BR2_PACKAGE_UNBOUND + bool "unbound" + select BR2_PACKAGE_EXPAT + select BR2_PACKAGE_LIBEVENT + select BR2_PACKAGE_OPENSSL + help + Unbound is a validating, recursive, and caching DNS resolver. + It supports DNSSEC, QNAME minimisation, DNS-over-TLS and + DNSCrypt. + + https://www.unbound.net + +if BR2_PACKAGE_UNBOUND + config BR2_PACKAGE_UNBOUND_DNSCRYPT + bool "Enable DNSCrypt" + select BR2_PACKAGE_LIBSODIUM + help + DNSCrypt wraps unmodified DNS queries between a client and + a DNS resolver. Default port used is 443 and like with + normal unencrypted DNS, it uses UDP first and falling back + to TCP if response too large. + + There is also DNS-over-TLS, a TCP only version + of proposed standard for DNS encryption (RFC 7858). + Default port for DNS-over-TLS is 853 and Unbound has + built-in support for it. + + https://tools.ietf.org/html/rfc7858 + + Note: Neither DNSCrypt or DNS-over-TLS encrypt the SNI. + Here is some suggestions how to handle SNI encryption: + + https://tools.ietf.org/html/draft-ietf-tls-sni-encryption-00 + +endifpackage/unbound/S70unbound new file +26
-0@@ -0,0 +1,26 @@ +#!/bin/sh + +[ -f /etc/unbound/unbound.conf ] || exit 0 + +case "$1" in + start) + printf "Starting unbound DNS server: " + start-stop-daemon -S -x /usr/sbin/unbound + [ $? = 0 ] && echo "OK" || echo "FAIL" + ;; + stop) + printf "Stopping unbound DNS server: " + start-stop-daemon -K -q -x /usr/sbin/unbound + [ $? = 0 ] && echo "OK" || echo "FAIL" + ;; + restart|reload) + $0 stop + sleep 1 + $0 start + ;; + *) + echo "Usage: $0 {start|stop|restart}" + exit 1 +esac + +exit 0package/unbound/unbound.hash new file +3
-0@@ -0,0 +1,3 @@ +# Locally calculated +sha256 152f486578242fe5c36e89995d0440b78d64c05123990aae16246b7f776ce955 unbound-1.10.0.tar.gz +sha256 8eb9a16cbfb8703090bbfa3a2028fd46bb351509a2f90dc1001e51fbe6fd45db LICENSEpackage/unbound/unbound.mk new file +57
-0@@ -0,0 +1,57 @@ +################################################################################ +# +# unbound +# +################################################################################ + +UNBOUND_VERSION = 1.10.0 +UNBOUND_SITE = https://www.unbound.net/downloads +UNBOUND_DEPENDENCIES = host-pkgconf expat libevent openssl +UNBOUND_LICENSE = BSD-3-Clause +UNBOUND_LICENSE_FILES = LICENSE +UNBOUND_CONF_OPTS += \ + --disable-rpath \ + --disable-debug \ + --with-conf-file=/etc/unbound/unbound.conf \ + --with-pidfile=/var/run/unbound.pid \ + --with-rootkey-file=/etc/unbound/root.key \ + --enable-tfo-server \ + --enable-relro-now \ + --with-pic \ + --enable-pie \ + --with-ssl=$(STAGING_DIR)/usr + +# uClibc-ng does not have MSG_FASTOPEN +# so TCP Fast Open client mode disabled for it +ifeq ($(BR2_TOOLCHAIN_USES_UCLIBC),y) +UNBOUND_CONF_OPTS += --disable-tfo-client +else +UNBOUND_CONF_OPTS += --enable-tfo-client +endif + +ifeq ($(BR2_TOOLCHAIN_HAS_THREADS),y) +UNBOUND_CONF_OPTS += --with-pthreads +else +UNBOUND_CONF_OPTS += --without-pthreads +endif + +ifeq ($(BR2_GCC_ENABLE_LTO),y) +UNBOUND_CONF_OPTS += --enable-flto +else +UNBOUND_CONF_OPTS += --disable-flto +endif + +ifeq ($(BR2_PACKAGE_UNBOUND_DNSCRYPT),y) +UNBOUND_CONF_OPTS += --enable-dnscrypt +UNBOUND_DEPENDENCIES += libsodium +else +UNBOUND_CONF_OPTS += --disable-dnscrypt +endif + +define UNBOUND_INSTALL_INIT_SYSV + $(INSTALL) -D -m 755 package/unbound/S70unbound \ + $(TARGET_DIR)/etc/init.d/S70unbound +endef + +$(eval $(autotools-package)) +Signature · 6 lines
2.25.2 _______________________________________________ buildroot mailing list buildroot at busybox.net http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH 1/1 unbound: new package
Hi Yann
Quoted 3 lines · Yann E. MORIN
In addition to the review by Yegor and Thomas, and as discussed on IRC the other day: unbound at least requires threads, probably even NPTL.
I investigated a bit and while it doesn't strictly require pthreads (i.e., there is an option to compile it without them), if pthreads are enabled it *does* required NPTL.
A new patch that adjusts the build script accordingly should be ready later tonight.
Kind regards
Signature · 2 lines
Stefan Ott https://www.ott.net/