ARM: dts: stm32: Enable I2C2 on DHCOM PDK2 carrier board
PATCH 1/1 ARM: dts: stm32: Enable I2C2 on DHCOM PDK2 carrier board
The I2C2 is routed out to header X21, enable it to make it available. Add a comment to I2C5, which is routed to header X22 right next to it.
Signed-off-by Marek Vasut <[email protected]>
Cc Alexandre Torgue <[email protected]>
Cc Maxime Coquelin <[email protected]>
Cc Patrice Chotard <[email protected]>
Cc Patrick Delaunay <[email protected]>
--- arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)
arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts +13 -1
@@ -97,7 +97,19 @@ phy0: ethernet-phy@1 { }; }; -&i2c5 { +&i2c2 { /* Header X22 */ + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&i2c5 { /* Header X21 */ pinctrl-names = "default"; pinctrl-0 = <&i2c5_pins_a>; i2c-scl-rising-time-ns = <185>;
Signature · 7 lines
2.25.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Hi Marek
Quoted 11 lines · Marek Vasut
The I2C2 is routed out to header X21, enable it to make it available. Add a comment to I2C5, which is routed to header X22 right next to it.
Signed-off-by Marek Vasut <[email protected]>Cc Alexandre Torgue <[email protected]>Cc Maxime Coquelin <[email protected]>Cc Patrice Chotard <[email protected]>Cc Patrick Delaunay <[email protected]>To: [email protected]
---
Applied on stm32-next.
Thanks.
Alex
Quoted 19 lines
arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts +6
-1@@ -97,7 +97,19 @@ phy0: ethernet-phy@1 { }; }; -&i2c5 { +&i2c2 { /* Header X22 */ + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay";
arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts phy0: ethernet-phy@1 { · line 115
Quoted 10 lines
arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts +7
-0+ /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&i2c5 { /* Header X21 */ pinctrl-names = "default"; pinctrl-0 = <&i2c5_pins_a>; i2c-scl-rising-time-ns = <185>;
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel