ASoC: rt5682: Add a property for DMIC clock rate setting
Subsystems (4)
Oder Chiou
maintainerPATCH v2 1/3 ASoC: rt5682: Add a property for DMIC clock rate setting
The patch adds a property for DMIC clock rate setting and changes the default clock rate to the common optimize DMIC clock rate.
Signed-off-by Oder Chiou <[email protected]>
--- include/sound/rt5682.h | 1 + sound/soc/codecs/rt5682.c | 9 +++++++-- 2 files changed, 8 insertions(+), 2 deletions(-)
include/sound/rt5682.h +1 -0
@@ -38,6 +38,7 @@ struct rt5682_platform_data {enum rt5682_dmic1_clk_pin dmic1_clk_pin;enum rt5682_jd_src jd_src;unsigned int btndet_delay; +unsigned int dmic_clk_rate;const char *dai_clk_names[RT5682_DAI_NUM_CLKS ]; };
sound/soc/codecs/rt5682.c +7 -2
@@ -1231,10 +1231,13 @@ static int set_dmic_clk(struct snd_soc_dapm_widget *w,struct snd_soc_component *component =snd_soc_dapm_to_component (w->dapm);struct rt5682_priv *rt5682 =snd_soc_component_get_drvdata (component); -int idx = -EINVAL ; +int idx = -EINVAL , dmic_clk_rate =3072000 ;static const int div[] = {2 ,4 ,6 ,8 ,12 ,16 ,24 ,32 ,48 ,64 ,96 ,128 }; - idx =rt5682_div_sel (rt5682,1500000 , div,ARRAY_SIZE (div)); +if (rt5682->pdata.dmic_clk_rate) + dmic_clk_rate = rt5682->pdata.dmic_clk_rate; + + idx =rt5682_div_sel (rt5682, dmic_clk_rate, div,ARRAY_SIZE (div));snd_soc_component_update_bits (component,RT5682_DMIC_CTRL_1 ,RT5682_DMIC_CLK_MASK , idx <<RT5682_DMIC_CLK_SFT );
@@ -3231,6 +3234,8 @@ static int rt5682_parse_dt(struct rt5682_priv *rt5682, struct device *dev) &rt5682->pdata.jd_src);device_property_read_u32 (dev,"realtek,btndet-delay" , &rt5682->pdata.btndet_delay); +device_property_read_u32 (dev,"realtek,dmic-clk-rate" , + &rt5682->pdata.dmic_clk_rate); rt5682->pdata.ldo1_en =of_get_named_gpio (dev->of_node,"realtek,ldo1-en-gpios" ,0 );
Signature · 1 line
2.25.1
Oder Chiou
maintainerPATCH v3 2/3 ASoC: rt5682: Add a property for DMIC delay
The patch adds a property for DMIC delay (ms) to avoid pop noise and changes the default delay setting.
Signed-off-by Oder Chiou <[email protected]>
--- include/sound/rt5682.h | 1 + sound/soc/codecs/rt5682.c | 12 +++++++++++- 2 files changed, 12 insertions(+), 1 deletion(-)
include/sound/rt5682.h +1 -0
@@ -39,6 +39,7 @@ struct rt5682_platform_data {enum rt5682_jd_src jd_src;unsigned int btndet_delay;unsigned int dmic_clk_rate; +unsigned int dmic_delay;const char *dai_clk_names[RT5682_DAI_NUM_CLKS ]; };
sound/soc/codecs/rt5682.c +11 -1
@@ -1544,10 +1544,18 @@ static int rt5682_hp_event(struct snd_soc_dapm_widget *w,static int set_dmic_power (struct snd_soc_dapm_widget *w,struct snd_kcontrol *kcontrol,int event) { +struct snd_soc_component *component = +snd_soc_dapm_to_component (w->dapm); +struct rt5682_priv *rt5682 =snd_soc_component_get_drvdata (component); +unsigned int delay =50 ; + +if (rt5682->pdata.dmic_delay) + delay = rt5682->pdata.dmic_delay; +switch (event) {case SND_SOC_DAPM_POST_PMU :/*Add delay to avoid pop noise*/ -msleep (150 ); +msleep (delay);break ;default :
@@ -3236,6 +3244,8 @@ static int rt5682_parse_dt(struct rt5682_priv *rt5682, struct device *dev) &rt5682->pdata.btndet_delay);device_property_read_u32 (dev,"realtek,dmic-clk-rate-hz" , &rt5682->pdata.dmic_clk_rate); +device_property_read_u32 (dev,"realtek,dmic-delay-ms" , + &rt5682->pdata.dmic_delay); rt5682->pdata.ldo1_en =of_get_named_gpio (dev->of_node,"realtek,ldo1-en-gpios" ,0 );
Signature · 1 line
2.25.1
Oder Chiou
maintainerPATCH v3 3/3 ASoC: rt5682: Add the descriptions for the DMIC clock rate and delay settings
In reply to Oder ChiouThe patch adds the descriptions for the DMIC clock rate and delay settings.
Signed-off-by Oder Chiou <[email protected]>
--- Documentation/devicetree/bindings/sound/rt5682.txt | 6 ++++++ 1 file changed, 6 insertions(+)
Documentation/devicetree/bindings/sound/rt5682.txt +6 -0
@@ -38,6 +38,12 @@ Optional properties: - clocks : phandle and clock specifier for codec MCLK. - clock-names : Clock name string for 'clocks' attribute, should be "mclk". +- realtek,dmic-clk-rate-hz : Set the clock rate (hz) for the requirement of + the particular DMIC. + +- realtek,dmic-delay-ms : Set the delay time (ms) for the requirement of + the particular DMIC. + Pins on the device (for linking into audio routes) for RT5682: * DMIC L1
Signature · 1 line
2.25.1