Skip to contentSkip to conversation

staging: hp100: Resolve indentation and space warnings generated by checkpatch

PATCH In review Soumyajit Deb 2 participants 5 messages Mar 23, 2020 – Mar 24, 2020 Staging

lore
Share & tools
lore
#0 lore raw

cover staging: hp100: Resolve indentation and space warnings generated by checkpatch

Patch 1:

No change introduced

Patch 2:

No change introduced.

Patch 3:

1.Change the patch subject to describe the changes more accurately. 2.Add space between signed of line and line before it.

Soumyajit Deb (3):
staging: hp100: Add space around operator +
staging: hp100: Remove space after * in pointer declarations
staging: hp100: Remove uneccessary blank lines

 drivers/staging/hp/hp100.c | 61 ++++++++++++++++----------------------
 1 file changed, 26 insertions(+), 35 deletions(-)
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/3 staging: hp100: Add space around operator +

Add space around operator + to improve code readability. Reported by checkpatch.pl

---
 drivers/staging/hp/hp100.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/hp/hp100.c +1 -1
index b89c4dcf53f5..00b3db8144c3 100644
@@ -119,7 +119,7 @@
 #define HP100_REGION_SIZE	0x20	/* for ioports */
 #define HP100_SIG_LEN		8	/* same as EISA_SIG_LEN */
 
-#define HP100_MAX_PACKET_SIZE	(1536+4)
+#define HP100_MAX_PACKET_SIZE	(1536 + 4)
 #define HP100_MIN_PACKET_SIZE	60
 
 #ifndef HP100_DEFAULT_RX_RATIO
Signature · 1 line
2.17.1
#2 lore raw

PATCH 2/3 staging: hp100: Remove space after * in pointer declarations

In reply to Soumyajit Deb

Remove space after * in pointer declaration to improve code readability and to adhere to the standard coding style.
Reported by checkpatch.pl

---
 drivers/staging/hp/hp100.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/staging/hp/hp100.c +5 -5
index 00b3db8144c3..2cf1104cd2dd 100644
@@ -246,11 +246,11 @@ static void hp100_BM_shutdown(struct net_device *dev);
 static void hp100_mmuinit(struct net_device *dev);
 static void hp100_init_pdls(struct net_device *dev);
 static int hp100_init_rxpdl(struct net_device *dev,
-			    register hp100_ring_t * ringptr,
-			    register u_int * pdlptr);
+			    register hp100_ring_t *ringptr,
+			    register u_int *pdlptr);
 static int hp100_init_txpdl(struct net_device *dev,
-			    register hp100_ring_t * ringptr,
-			    register u_int * pdlptr);
+			    register hp100_ring_t *ringptr,
+			    register u_int *pdlptr);
 static void hp100_rxfill(struct net_device *dev);
 static void hp100_hwinit(struct net_device *dev);
 static void hp100_clean_txring(struct net_device *dev);
@@ -264,7 +264,7 @@ static void hp100_RegisterDump(struct net_device *dev);
  * because it was properly DMA allocated via pci_alloc_consistent(),
  * so we just need to "retrieve" the original mapping to bus/phys/dma
  * address - Jean II */
-static inline dma_addr_t virt_to_whatever(struct net_device *dev, u32 * ptr)
+static inline dma_addr_t virt_to_whatever(struct net_device *dev, u32 *ptr)
 {
 	struct hp100_private *lp = netdev_priv(dev);
 	return ((u_long) ptr) + lp->whatever_offset;
Signature · 1 line
2.17.1
#3 lore raw

PATCH 3/3 staging: hp100: Remove uneccessary blank lines

In reply to Soumyajit Deb

Remove uneccessary blank lines which are flagged by checkpatch.pl as warning. Remove space between function name and ( . Add space after , and remove space between ( and next character in the if statement. Reported by checkpatch.pl

---
 drivers/staging/hp/hp100.c | 49 ++++++++++++++++----------------------
 1 file changed, 20 insertions(+), 29 deletions(-)
drivers/staging/hp/hp100.c +20 -29
index 2cf1104cd2dd..fe76d53b1675 100644
@@ -220,7 +220,6 @@ module_param(hp100_mode, int, 0);
 static int hp100_probe1(struct net_device *dev, int ioaddr, u_char bus,
 			struct pci_dev *pci_dev);
 
-
 static int hp100_open(struct net_device *dev);
 static int hp100_close(struct net_device *dev);
 static netdev_tx_t hp100_start_xmit(struct sk_buff *skb,
@@ -297,7 +296,7 @@ static const char *hp100_read_id(int ioaddr)
 	int i;
 	static char str[HP100_SIG_LEN];
 	unsigned char sig[4], sum;
-        unsigned short rev;
+	unsigned short rev;
 
 	hp100_page(ID_MAC_ADDR);
 	sum = 0;
@@ -346,8 +345,8 @@ static __init int hp100_isa_probe1(struct net_device *dev, int ioaddr)
 	return hp100_probe1(dev, ioaddr, HP100_BUS_ISA, NULL);
  err:
 	return -ENODEV;
-
 }
+
 /*
  * Probe for ISA board.
  * EISA and PCI are handled by device infrastructure.
@@ -555,8 +554,8 @@ static int hp100_probe1(struct net_device *dev, int ioaddr, u_char bus,
 			 * can map the full 32bit address space.
 			 * Also, we can have EISA Busmaster cards (not tested),
 			 * so beware !!! - Jean II */
-			if((bus == HP100_BUS_PCI) &&
-			   (pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32)))) {
+			if ((bus == HP100_BUS_PCI) &&
+			    (pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32)))) {
 				/* Gracefully fallback to shared memory */
 				goto busmasterfail;
 			}
@@ -603,7 +602,7 @@ static int hp100_probe1(struct net_device *dev, int ioaddr, u_char bus,
 		if (local_mode != 1) {	/* = not busmaster */
 			/* We try with smaller memory sizes, if ioremap fails */
 			for (virt_memory_size = memory_size; virt_memory_size > 16383; virt_memory_size >>= 1) {
-				if ((mem_ptr_virt = ioremap((u_long) mem_ptr_phys, virt_memory_size)) == NULL) {
+				if ((mem_ptr_virt = ioremap((u_long)mem_ptr_phys, virt_memory_size)) == NULL) {
 #ifdef HP100_DEBUG
 					printk("hp100: %s: ioremap for 0x%x bytes high PCI memory at 0x%lx failed\n", dev->name, virt_memory_size, mem_ptr_phys);
 #endif
@@ -871,14 +870,13 @@ static void hp100_hwinit(struct net_device *dev)
 	/* Finally try to log in the Hub if there may be a VG connection. */
 	if ((lp->lan_type == HP100_LAN_100) || (lp->lan_type == HP100_LAN_ERR))
 		hp100_login_to_vg_hub(dev, 0);	/* relogin */
-
 }
 
-
 /*
  * mmuinit - Reinitialise Cascade MMU and MAC settings.
  * Note: Must already be in reset and leaves card in reset.
  */
+
 static void hp100_mmuinit(struct net_device *dev)
 {
 	int ioaddr = dev->base_addr;
@@ -1127,10 +1125,10 @@ static int hp100_close(struct net_device *dev)
 	return 0;
 }
 
-
 /*
  * Configure the PDL Rx rings and LAN
  */
+
 static void hp100_init_pdls(struct net_device *dev)
 {
 	struct hp100_private *lp = netdev_priv(dev);
@@ -1209,7 +1207,6 @@ static int hp100_init_rxpdl(struct net_device *dev,
 	return roundup(MAX_RX_FRAG * 2 + 2, 4);
 }
 
-
 static int hp100_init_txpdl(struct net_device *dev,
 			    register hp100_ring_t * ringptr,
 			    register u32 * pdlptr)
@@ -1568,7 +1565,6 @@ static netdev_tx_t hp100_start_xmit_bm(struct sk_buff *skb,
 	return NETDEV_TX_OK;
 }
 
-
 /* clean_txring checks if packets have been sent by the card by reading
  * the TX_PDL register from the performance page and comparing it to the
  * number of committed packets. It then frees the skb's of the packets that
@@ -1576,6 +1572,7 @@ static netdev_tx_t hp100_start_xmit_bm(struct sk_buff *skb,
  *
  * Needs the PERFORMANCE page selected.
  */
+
 static void hp100_clean_txring(struct net_device *dev)
 {
 	struct hp100_private *lp = netdev_priv(dev);
@@ -1732,10 +1729,8 @@ static netdev_tx_t hp100_start_xmit(struct sk_buff *skb,
 drop:
 	dev_kfree_skb(skb);
 	return NETDEV_TX_OK;
-
 }
 
-
 /*
  * Receive Function (Non-Busmaster mode)
  * Called when an "Receive Packet" interrupt occurs, i.e. the receive
@@ -1803,7 +1798,7 @@ static void hp100_rx(struct net_device *dev)
 
 			u_char *ptr;
 
-			skb_reserve(skb,2);
+			skb_reserve(skb, 2);
 
 			/* ptr to start of the sk_buff data area */
 			skb_put(skb, pkt_len);
@@ -1811,7 +1806,7 @@ static void hp100_rx(struct net_device *dev)
 
 			/* Now transfer the data from the card into that area */
 			if (lp->mode == 2)
-				memcpy_fromio(ptr, lp->mem_ptr_virt,pkt_len);
+				memcpy_fromio(ptr, lp->mem_ptr_virt, pkt_len);
 			else	/* io mapped */
 				insl(ioaddr + HP100_REG_DATA32, ptr, pkt_len >> 2);
 
@@ -1946,13 +1941,13 @@ static void hp100_rx_bm(struct net_device *dev)
 			hp100_outl((u32) lp->rxrtail->pdl_paddr, RX_PDA);
 			lp->rxrtail = lp->rxrtail->next;
 		}
-
 	}
 }
 
 /*
  *  statistics
  */
+
 static struct net_device_stats *hp100_get_stats(struct net_device *dev)
 {
 	unsigned long flags;
@@ -2030,7 +2025,6 @@ static void hp100_clear_stats(struct hp100_private *lp, int ioaddr)
 	spin_unlock_irqrestore(&lp->lock, flags);
 }
 
-
 /*
  *  multicast setup
  */
@@ -2454,11 +2448,11 @@ static int hp100_sense_lan(struct net_device *dev)
 	}
 
 	/* Those cards don't have a 100 Mbit connector */
-	if ( !strcmp(lp->id, "HWP1920")  ||
-	     (lp->pci_dev &&
-	      lp->pci_dev->vendor == PCI_VENDOR_ID &&
-	      (lp->pci_dev->device == PCI_DEVICE_ID_HP_J2970A ||
-	       lp->pci_dev->device == PCI_DEVICE_ID_HP_J2973A)))
+	if (!strcmp(lp->id, "HWP1920")  ||
+	    (lp->pci_dev &&
+	     lp->pci_dev->vendor == PCI_VENDOR_ID &&
+	     (lp->pci_dev->device == PCI_DEVICE_ID_HP_J2970A ||
+	      lp->pci_dev->device == PCI_DEVICE_ID_HP_J2973A)))
 		return HP100_LAN_ERR;
 
 	if (val_VG & HP100_LINK_CABLE_ST)	/* Can hear the HUBs tone. */
@@ -2797,7 +2791,6 @@ void hp100_RegisterDump(struct net_device *dev)
 }
 #endif
 
-
 static void cleanup_dev(struct net_device *d)
 {
 	struct hp100_private *p = netdev_priv(d);
@@ -2918,7 +2911,6 @@ static void hp100_pci_remove(struct pci_dev *pdev)
 	pci_disable_device(pdev);
 }
 
-
 static struct pci_driver hp100_pci_driver = {
 	.name		= "hp100",
 	.id_table	= hp100_pci_tbl,
@@ -2944,7 +2936,7 @@ MODULE_DESCRIPTION("HP CASCADE Architecture Driver for 100VG-AnyLan Network Adap
 #if defined(MODULE) && defined(CONFIG_ISA)
 #define HP100_DEVICES 5
 /* Parameters set by insmod */
-static int hp100_port[HP100_DEVICES] = { 0, [1 ... (HP100_DEVICES-1)] = -1 };
+static int hp100_port[HP100_DEVICES] = { 0, [1 ... (HP100_DEVICES - 1)] = -1 };
 module_param_hw_array(hp100_port, int, ioport, NULL, 0);
 
 /* List of devices */
@@ -3010,18 +3002,17 @@ static int __init hp100_module_init(void)
  out:
 	return err;
  out3:
-	eisa_driver_unregister (&hp100_eisa_driver);
+	eisa_driver_unregister(&hp100_eisa_driver);
  out2:
 	hp100_isa_cleanup();
 	goto out;
 }
 
-
 static void __exit hp100_module_exit(void)
 {
 	hp100_isa_cleanup();
-	eisa_driver_unregister (&hp100_eisa_driver);
-	pci_unregister_driver (&hp100_pci_driver);
+	eisa_driver_unregister(&hp100_eisa_driver);
+	pci_unregister_driver(&hp100_pci_driver);
 }
 
 module_init(hp100_module_init)
Signature · 1 line
2.17.1
maintainer
#4 lore raw
In reply to Soumyajit Deb
Quoted 4 lines · Soumyajit Deb

Patch 1:

No change introduced

Quoted 8 lines

Patch 2:

No change introduced.

Patch 3:

1.Change the patch subject to describe the changes more accurately. 2.Add space between signed of line and line before it.

I already applied some of these, right?

Please rebase the series on my tree and only send the remaining patches that I have not applied.

thanks,

greg k-h