PCI: tegra: Print -EPROBE_DEFER error message at debug level
PATCH 1/1 PCI: tegra: Print -EPROBE_DEFER error message at debug level
From: Thierry Reding <[email protected]>
Probe deferral is an expected error condition that will usually be recovered from. Print such error messages at debug level to make them available for diagnostic purposes when building with debugging enabled and hide them otherwise to not spam the kernel log with them.
--- drivers/pci/controller/dwc/pcie-tegra194.c | 42 ++++++++++++++++++---- 1 file changed, 35 insertions(+), 7 deletions(-)
drivers/pci/controller/dwc/pcie-tegra194.c +35 -7
@@ -1159,17 +1159,31 @@ static int tegra_pcie_dw_parse_dt(struct tegra_pcie_dw *pcie)/* Endpoint mode specific DT entries */ pcie->pex_rst_gpiod =devm_gpiod_get (pcie->dev,"reset" ,GPIOD_IN );if (IS_ERR (pcie->pex_rst_gpiod)) { -dev_err (pcie->dev,"Failed to get PERST GPIO: %ld\n" , -PTR_ERR (pcie->pex_rst_gpiod)); -return PTR_ERR (pcie->pex_rst_gpiod); +int err =PTR_ERR (pcie->pex_rst_gpiod); +const char *level =KERN_ERR ; + +if (err == -EPROBE_DEFER ) + level =KERN_DEBUG ; + +dev_printk (level, pcie->dev, +dev_fmt ("Failed to get PERST GPIO: %d\n" ), + err); +return err; } pcie->pex_refclk_sel_gpiod =devm_gpiod_get (pcie->dev,"nvidia,refclk-select" ,GPIOD_OUT_HIGH );if (IS_ERR (pcie->pex_refclk_sel_gpiod)) { -dev_info (pcie->dev,"Failed to get REFCLK select GPIOs: %ld\n" , -PTR_ERR (pcie->pex_refclk_sel_gpiod)); +int err =PTR_ERR (pcie->pex_refclk_sel_gpiod); +const char *level =KERN_ERR ; + +if (err == -EPROBE_DEFER ) + level =KERN_DEBUG ; + +dev_printk (level, pcie->dev, +dev_fmt ("Failed to get REFCLK select GPIOs: %d\n" ), + err); pcie->pex_refclk_sel_gpiod =NULL ; }
@@ -2058,13 +2072,27 @@ static int tegra_pcie_dw_probe(struct platform_device *pdev) ret =tegra_pcie_dw_parse_dt (pcie);if (ret <0 ) { -dev_err (dev,"Failed to parse device tree: %d\n" , ret); +const char *level =KERN_ERR ; + +if (ret == -EPROBE_DEFER ) + level =KERN_DEBUG ; + +dev_printk (level, dev, +dev_fmt ("Failed to parse device tree: %d\n" ), + ret);return ret; } ret =tegra_pcie_get_slot_regulators (pcie);if (ret <0 ) { -dev_err (dev,"Failed to get slot regulators: %d\n" , ret); +const char *level =KERN_ERR ; + +if (ret == -EPROBE_DEFER ) + level =KERN_DEBUG ; + +dev_printk (level, dev, +dev_fmt ("Failed to get slot regulators: %d\n" ), + ret);return ret; }
Signature · 1 line
2.24.1
Quoted 87 lines · Thierry Reding
External email: Use caution opening links or attachments
From: Thierry Reding <[email protected]>
Probe deferral is an expected error condition that will usually be recovered from. Print such error messages at debug level to make them available for diagnostic purposes when building with debugging enabled and hide them otherwise to not spam the kernel log with them.
Signed-off-by Thierry Reding <[email protected]>--- drivers/pci/controller/dwc/pcie-tegra194.c | 42 ++++++++++++++++++---- 1 file changed, 35 insertions(+), 7 deletions(-)drivers/pci/controller/dwc/pcie-tegra194.c +35
-8@@ -1159,17 +1159,31 @@ static int tegra_pcie_dw_parse_dt(struct tegra_pcie_dw *pcie)/* Endpoint mode specific DT entries */ pcie->pex_rst_gpiod =devm_gpiod_get (pcie->dev,"reset" ,GPIOD_IN );if (IS_ERR (pcie->pex_rst_gpiod)) { -dev_err (pcie->dev,"Failed to get PERST GPIO: %ld\n" , -PTR_ERR (pcie->pex_rst_gpiod)); -return PTR_ERR (pcie->pex_rst_gpiod); +int err =PTR_ERR (pcie->pex_rst_gpiod); +const char *level =KERN_ERR ; + +if (err == -EPROBE_DEFER ) + level =KERN_DEBUG ; + +dev_printk (level, pcie->dev, +dev_fmt ("Failed to get PERST GPIO: %d\n" ), + err); +return err; } pcie->pex_refclk_sel_gpiod =devm_gpiod_get (pcie->dev,"nvidia,refclk-select" ,GPIOD_OUT_HIGH );if (IS_ERR (pcie->pex_refclk_sel_gpiod)) { -dev_info (pcie->dev,"Failed to get REFCLK select GPIOs: %ld\n" , -PTR_ERR (pcie->pex_refclk_sel_gpiod)); +int err =PTR_ERR (pcie->pex_refclk_sel_gpiod); +const char *level =KERN_ERR ; + +if (err == -EPROBE_DEFER ) + level =KERN_DEBUG ; + +dev_printk (level, pcie->dev, +dev_fmt ("Failed to get REFCLK select GPIOs: %d\n" ), + err); pcie->pex_refclk_sel_gpiod =NULL ; }@@ -2058,13 +2072,27 @@ static int tegra_pcie_dw_probe(struct platform_device *pdev) ret =tegra_pcie_dw_parse_dt (pcie);if (ret <0 ) { -dev_err (dev,"Failed to parse device tree: %d\n" , ret); +const char *level =KERN_ERR ; + +if (ret == -EPROBE_DEFER ) + level =KERN_DEBUG ; + +dev_printk (level, dev, +dev_fmt ("Failed to parse device tree: %d\n" ), + ret);return ret; } ret =tegra_pcie_get_slot_regulators (pcie);if (ret <0 ) { -dev_err (dev,"Failed to get slot regulators: %d\n" , ret); +const char *level =KERN_ERR ; + +if (ret == -EPROBE_DEFER ) + level =KERN_DEBUG ; + +dev_printk (level, dev, +dev_fmt ("Failed to get slot regulators: %d\n" ), + ret);return ret; } --
Quoted 2 lines
2.24.1
Quoted 11 lines · Thierry Reding
From: Thierry Reding <[email protected]>
Probe deferral is an expected error condition that will usually be recovered from. Print such error messages at debug level to make them available for diagnostic purposes when building with debugging enabled and hide them otherwise to not spam the kernel log with them.
Signed-off-by Thierry Reding <[email protected]>--- drivers/pci/controller/dwc/pcie-tegra194.c | 42 ++++++++++++++++++---- 1 file changed, 35 insertions(+), 7 deletions(-)
Hi Thierry,
what tree/branch is it based on ? I assume it may depend on some patches queued in one of my branches so please let me know and I will apply accordingly.
Thanks,
Lorenzo
Quoted 74 lines
drivers/pci/controller/dwc/pcie-tegra194.c +35
-7@@ -1159,17 +1159,31 @@ static int tegra_pcie_dw_parse_dt(struct tegra_pcie_dw *pcie)/* Endpoint mode specific DT entries */ pcie->pex_rst_gpiod =devm_gpiod_get (pcie->dev,"reset" ,GPIOD_IN );if (IS_ERR (pcie->pex_rst_gpiod)) { -dev_err (pcie->dev,"Failed to get PERST GPIO: %ld\n" , -PTR_ERR (pcie->pex_rst_gpiod)); -return PTR_ERR (pcie->pex_rst_gpiod); +int err =PTR_ERR (pcie->pex_rst_gpiod); +const char *level =KERN_ERR ; + +if (err == -EPROBE_DEFER ) + level =KERN_DEBUG ; + +dev_printk (level, pcie->dev, +dev_fmt ("Failed to get PERST GPIO: %d\n" ), + err); +return err; } pcie->pex_refclk_sel_gpiod =devm_gpiod_get (pcie->dev,"nvidia,refclk-select" ,GPIOD_OUT_HIGH );if (IS_ERR (pcie->pex_refclk_sel_gpiod)) { -dev_info (pcie->dev,"Failed to get REFCLK select GPIOs: %ld\n" , -PTR_ERR (pcie->pex_refclk_sel_gpiod)); +int err =PTR_ERR (pcie->pex_refclk_sel_gpiod); +const char *level =KERN_ERR ; + +if (err == -EPROBE_DEFER ) + level =KERN_DEBUG ; + +dev_printk (level, pcie->dev, +dev_fmt ("Failed to get REFCLK select GPIOs: %d\n" ), + err); pcie->pex_refclk_sel_gpiod =NULL ; }@@ -2058,13 +2072,27 @@ static int tegra_pcie_dw_probe(struct platform_device *pdev) ret =tegra_pcie_dw_parse_dt (pcie);if (ret <0 ) { -dev_err (dev,"Failed to parse device tree: %d\n" , ret); +const char *level =KERN_ERR ; + +if (ret == -EPROBE_DEFER ) + level =KERN_DEBUG ; + +dev_printk (level, dev, +dev_fmt ("Failed to parse device tree: %d\n" ), + ret);return ret; } ret =tegra_pcie_get_slot_regulators (pcie);if (ret <0 ) { -dev_err (dev,"Failed to get slot regulators: %d\n" , ret); +const char *level =KERN_ERR ; + +if (ret == -EPROBE_DEFER ) + level =KERN_DEBUG ; + +dev_printk (level, dev, +dev_fmt ("Failed to get slot regulators: %d\n" ), + ret);return ret; }Signature · 1 line
2.24.1
Quoted 13 lines · Lorenzo Pieralisi
Quoted 11 lines · Thierry Reding
From: Thierry Reding <[email protected]>
Probe deferral is an expected error condition that will usually be recovered from. Print such error messages at debug level to make them available for diagnostic purposes when building with debugging enabled and hide them otherwise to not spam the kernel log with them.
Signed-off-by Thierry Reding <[email protected]>--- drivers/pci/controller/dwc/pcie-tegra194.c | 42 ++++++++++++++++++---- 1 file changed, 35 insertions(+), 7 deletions(-)
Quoted 5 lines
Hi Thierry,
what tree/branch is it based on ? I assume it may depend on some patches queued in one of my branches so please let me know and I will apply accordingly.
Hi Lorenzo,
This should apply on top of commit 5b645b7fade9 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194") which is currently in linux-next.
Looking at your "pci" tree, that commit seems to be in a branch called pci/endpoint, though the equivalent commit there has a slightly different SHA:
f4746b0ccef9 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
git range-diff shows that the only difference is that in the patch in linux-next there are a couple of additional exported symbols that are not in your pci/endpoint branch. That shouldn't be relevant, though, since this patch touches another area of the code, so applying this to your pci/endpoint branch should work.
Thierry
Quoted 74 lines
Quoted 74 lines
drivers/pci/controller/dwc/pcie-tegra194.c +35
-7@@ -1159,17 +1159,31 @@ static int tegra_pcie_dw_parse_dt(struct tegra_pcie_dw *pcie)/* Endpoint mode specific DT entries */ pcie->pex_rst_gpiod =devm_gpiod_get (pcie->dev,"reset" ,GPIOD_IN );if (IS_ERR (pcie->pex_rst_gpiod)) { -dev_err (pcie->dev,"Failed to get PERST GPIO: %ld\n" , -PTR_ERR (pcie->pex_rst_gpiod)); -return PTR_ERR (pcie->pex_rst_gpiod); +int err =PTR_ERR (pcie->pex_rst_gpiod); +const char *level =KERN_ERR ; + +if (err == -EPROBE_DEFER ) + level =KERN_DEBUG ; + +dev_printk (level, pcie->dev, +dev_fmt ("Failed to get PERST GPIO: %d\n" ), + err); +return err; } pcie->pex_refclk_sel_gpiod =devm_gpiod_get (pcie->dev,"nvidia,refclk-select" ,GPIOD_OUT_HIGH );if (IS_ERR (pcie->pex_refclk_sel_gpiod)) { -dev_info (pcie->dev,"Failed to get REFCLK select GPIOs: %ld\n" , -PTR_ERR (pcie->pex_refclk_sel_gpiod)); +int err =PTR_ERR (pcie->pex_refclk_sel_gpiod); +const char *level =KERN_ERR ; + +if (err == -EPROBE_DEFER ) + level =KERN_DEBUG ; + +dev_printk (level, pcie->dev, +dev_fmt ("Failed to get REFCLK select GPIOs: %d\n" ), + err); pcie->pex_refclk_sel_gpiod =NULL ; }@@ -2058,13 +2072,27 @@ static int tegra_pcie_dw_probe(struct platform_device *pdev) ret =tegra_pcie_dw_parse_dt (pcie);if (ret <0 ) { -dev_err (dev,"Failed to parse device tree: %d\n" , ret); +const char *level =KERN_ERR ; + +if (ret == -EPROBE_DEFER ) + level =KERN_DEBUG ; + +dev_printk (level, dev, +dev_fmt ("Failed to parse device tree: %d\n" ), + ret);return ret; } ret =tegra_pcie_get_slot_regulators (pcie);if (ret <0 ) { -dev_err (dev,"Failed to get slot regulators: %d\n" , ret); +const char *level =KERN_ERR ; + +if (ret == -EPROBE_DEFER ) + level =KERN_DEBUG ; + +dev_printk (level, dev, +dev_fmt ("Failed to get slot regulators: %d\n" ), + ret);return ret; }Signature · 1 line
2.24.1
Lorenzo Pieralisi
AppliedQuoted 30 lines · Thierry Reding
Quoted 13 lines · Lorenzo Pieralisi
Quoted 11 lines · Thierry Reding
From: Thierry Reding <[email protected]>
Probe deferral is an expected error condition that will usually be recovered from. Print such error messages at debug level to make them available for diagnostic purposes when building with debugging enabled and hide them otherwise to not spam the kernel log with them.
Signed-off-by Thierry Reding <[email protected]>--- drivers/pci/controller/dwc/pcie-tegra194.c | 42 ++++++++++++++++++---- 1 file changed, 35 insertions(+), 7 deletions(-)Quoted 5 lines
Hi Thierry,
what tree/branch is it based on ? I assume it may depend on some patches queued in one of my branches so please let me know and I will apply accordingly.
Hi Lorenzo,
This should apply on top of commit
5b645b7fade9("PCI: tegra: Add support for PCIe endpoint mode in Tegra194") which is currently in linux-next.Looking at your "pci" tree, that commit seems to be in a branch called pci/endpoint, though the equivalent commit there has a slightly different SHA:
Quoted 7 lines
f4746b0ccef9("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")git range-diff shows that the only difference is that in the patch in linux-next there are a couple of additional exported symbols that are not in your pci/endpoint branch. That shouldn't be relevant, though, since this patch touches another area of the code, so applying this to your pci/endpoint branch should work.
Applied to pci/endpoint, thanks !
Lorenzo
Quoted 76 lines
Thierry
Quoted 74 lines
Quoted 74 lines
drivers/pci/controller/dwc/pcie-tegra194.c +35
-7@@ -1159,17 +1159,31 @@ static int tegra_pcie_dw_parse_dt(struct tegra_pcie_dw *pcie)/* Endpoint mode specific DT entries */ pcie->pex_rst_gpiod =devm_gpiod_get (pcie->dev,"reset" ,GPIOD_IN );if (IS_ERR (pcie->pex_rst_gpiod)) { -dev_err (pcie->dev,"Failed to get PERST GPIO: %ld\n" , -PTR_ERR (pcie->pex_rst_gpiod)); -return PTR_ERR (pcie->pex_rst_gpiod); +int err =PTR_ERR (pcie->pex_rst_gpiod); +const char *level =KERN_ERR ; + +if (err == -EPROBE_DEFER ) + level =KERN_DEBUG ; + +dev_printk (level, pcie->dev, +dev_fmt ("Failed to get PERST GPIO: %d\n" ), + err); +return err; } pcie->pex_refclk_sel_gpiod =devm_gpiod_get (pcie->dev,"nvidia,refclk-select" ,GPIOD_OUT_HIGH );if (IS_ERR (pcie->pex_refclk_sel_gpiod)) { -dev_info (pcie->dev,"Failed to get REFCLK select GPIOs: %ld\n" , -PTR_ERR (pcie->pex_refclk_sel_gpiod)); +int err =PTR_ERR (pcie->pex_refclk_sel_gpiod); +const char *level =KERN_ERR ; + +if (err == -EPROBE_DEFER ) + level =KERN_DEBUG ; + +dev_printk (level, pcie->dev, +dev_fmt ("Failed to get REFCLK select GPIOs: %d\n" ), + err); pcie->pex_refclk_sel_gpiod =NULL ; }@@ -2058,13 +2072,27 @@ static int tegra_pcie_dw_probe(struct platform_device *pdev) ret =tegra_pcie_dw_parse_dt (pcie);if (ret <0 ) { -dev_err (dev,"Failed to parse device tree: %d\n" , ret); +const char *level =KERN_ERR ; + +if (ret == -EPROBE_DEFER ) + level =KERN_DEBUG ; + +dev_printk (level, dev, +dev_fmt ("Failed to parse device tree: %d\n" ), + ret);return ret; } ret =tegra_pcie_get_slot_regulators (pcie);if (ret <0 ) { -dev_err (dev,"Failed to get slot regulators: %d\n" , ret); +const char *level =KERN_ERR ; + +if (ret == -EPROBE_DEFER ) + level =KERN_DEBUG ; + +dev_printk (level, dev, +dev_fmt ("Failed to get slot regulators: %d\n" ), + ret);return ret; }Signature · 1 line
2.24.1