Skip to contentSkip to conversation

lpfc: Change default SCSI LUN QD to 64

PATCH New James Smart 1 participant 1 message Mar 23, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 9/12 lpfc: Change default SCSI LUN QD to 64

The default lun queue depth by the driver has been 30 for many years. However, this value, when used with more recent hardware, has actually throttled some tests that concentrate io on a lun.

Increase the default lun queue depth to 64.

Queue full handling, reported by the target, remains in effect and unchanged.

---
repost:
Respond to review comment on the value in the comment. Removed min, max, default from comment. No need to state when they are clearly specified in the macro.

---
 drivers/scsi/lpfc/lpfc_attr.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/scsi/lpfc/lpfc_attr.c +2 -2
index 4317c9ce7eca..63affb2269e7 100644
@@ -3868,9 +3868,9 @@ LPFC_VPORT_ATTR_R(enable_da_id, 1, 0, 1,
 
 /*
 # lun_queue_depth:  This parameter is used to limit the number of outstanding
-# commands per FCP LUN. Value range is [1,512]. Default value is 30.
+# commands per FCP LUN.
 */
-LPFC_VPORT_ATTR_R(lun_queue_depth, 30, 1, 512,
+LPFC_VPORT_ATTR_R(lun_queue_depth, 64, 1, 512,
 		  "Max number of FCP commands we can queue to a specific LUN");
 
 /*
Signature · 1 line
2.16.4