i915 lpsp support for lpsp igt
Subsystems (3)
v2 cover i915 lpsp support for lpsp igt
This series adds i915_lpsp_info connector debugfs.
Resend to test with below msgid of igt.
Test-with: [email protected]
Anshuman Gupta (3):
drm/i915: Power well id for ICL PG3 drm/i915: Add i915_lpsp_info debugfs drm/i915: Add connector dbgfs for all connectors
.../gpu/drm/i915/display/intel_connector.c | 3 + .../drm/i915/display/intel_display_debugfs.c | 104 ++++++++++++++++++ .../drm/i915/display/intel_display_power.c | 6 +- .../drm/i915/display/intel_display_power.h | 2 +- drivers/gpu/drm/i915/display/intel_dp.c | 3 - drivers/gpu/drm/i915/display/intel_hdmi.c | 3 - 6 files changed, 111 insertions(+), 10 deletions(-)
Signature · 6 lines
2.25.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 1/3 drm/i915: Power well id for ICL PG3
Gen11 onwards PG3 is contains functions for pipe B, external displays, and VGA. It make sense to add a power well id with name ICL_DISP_PW_3 rather then TGL_DISP_PW_3, Also PG3 power well id requires to know if lpsp is enabled.
--- drivers/gpu/drm/i915/display/intel_display_power.c | 6 +++--- drivers/gpu/drm/i915/display/intel_display_power.h | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/display/intel_display_power.c +3 -3
@@ -943,7 +943,7 @@ static void assert_can_enable_dc5(struct drm_i915_private *dev_priv)/* Power wells at this level and above must be disabled for DC5 entry */ if (INTEL_GEN (dev_priv) >=12 ) - high_pg =TGL_DISP_PW_3 ; + high_pg =ICL_DISP_PW_3 ;else high_pg =SKL_DISP_PW_2 ;
@@ -3564,7 +3564,7 @@ static const struct i915_power_well_desc icl_power_wells[] = { .name = "power well 3", .domains = ICL_PW_3_POWER_DOMAINS, .ops = &hsw_power_well_ops, - .id = DISP_PW_ID_NONE, + .id = ICL_DISP_PW_3, { .hsw.regs = &hsw_power_well_regs, .hsw.idx = ICL_PW_CTL_IDX_PW_3,
@@ -3942,7 +3942,7 @@ static const struct i915_power_well_desc tgl_power_wells[] = { .name = "power well 3", .domains = TGL_PW_3_POWER_DOMAINS, .ops = &hsw_power_well_ops, - .id = TGL_DISP_PW_3, + .id = ICL_DISP_PW_3, { .hsw.regs = &hsw_power_well_regs, .hsw.idx = ICL_PW_CTL_IDX_PW_3,
drivers/gpu/drm/i915/display/intel_display_power.h +1 -1
@@ -100,7 +100,7 @@ enum i915_power_well_id {SKL_DISP_PW_MISC_IO ,SKL_DISP_PW_1 ,SKL_DISP_PW_2 , -TGL_DISP_PW_3 , +ICL_DISP_PW_3 , SKL_DISP_DC_OFF, };
Signature · 6 lines
2.25.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 2/3 drm/i915: Add i915_lpsp_info debugfs
In reply to Anshuman GuptaNew i915_pm_lpsp igt solution approach relies on connector specific debugfs attribute i915_lpsp_info, it exposes whether an output is capable of driving lpsp and exposes lpsp enablement info.
v2:
- CI fixup.
--- .../drm/i915/display/intel_display_debugfs.c | 104 ++++++++++++++++++ 1 file changed, 104 insertions(+)
drivers/gpu/drm/i915/display/intel_display_debugfs.c +104 -0
@@ -9,6 +9,7 @@#include "i915_debugfs.h" #include "intel_csr.h" #include "intel_display_debugfs.h" +#include "intel_display_power.h" #include "intel_display_types.h" #include "intel_dp.h" #include "intel_fbc.h"
@@ -611,6 +612,95 @@ static void intel_hdcp_info(struct seq_file *m,seq_puts (m,"\n" ); } +static bool intel_have_embedded_panel (struct drm_connector *connector) +{ +return connector->connector_type ==DRM_MODE_CONNECTOR_DSI || + connector->connector_type == DRM_MODE_CONNECTOR_eDP; +} + +static bool intel_have_gen9_lpsp_panel (struct drm_connector *connector) +{ +return intel_have_embedded_panel (connector) || + connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort; +} + +static int +intel_lpsp_power_well_enabled (struct drm_i915_private *dev_priv, +enum i915_power_well_id power_well_id) +{ +struct i915_power_domains *power_domains = &dev_priv->power_domains; +struct i915_power_well *power_well =NULL , *pw_itr; +bool is_enabled; + +mutex_lock (&power_domains->lock); + +for_each_power_well (dev_priv, pw_itr) +if (pw_itr->desc->id == power_well_id) { + power_well = pw_itr; +break ; + } + +if (drm_WARN_ON (&dev_priv->drm, !power_well)) { +mutex_unlock (&power_domains->lock); +/* Assume that BIOS has enabled the power well*/ +return true; + } + + is_enabled = !!power_well->count; +mutex_unlock (&power_domains->lock); + +return is_enabled; +} + +static void +intel_lpsp_capable_info (struct seq_file *m,struct drm_connector *connector) +{ +struct intel_encoder *encoder = +intel_attached_encoder (to_intel_connector (connector)); +struct drm_i915_private *dev_priv =to_i915 (connector->dev); +bool lpsp_capable = false; + +if (IS_TIGERLAKE (dev_priv) && encoder->port <=PORT_C ) { + lpsp_capable = true; + }else if (INTEL_GEN (dev_priv) >=11 &&intel_have_embedded_panel (connector)) { + lpsp_capable = true; + }else if (INTEL_GEN (dev_priv) >=9 && (encoder->port ==PORT_A && +intel_have_gen9_lpsp_panel (connector))) { + lpsp_capable = true; + }else if ((IS_HASWELL (dev_priv) ||IS_BROADWELL (dev_priv)) && + connector->connector_type == DRM_MODE_CONNECTOR_eDP) { + lpsp_capable = true; + }else { +seq_puts (m,"LPSP not supported\n" ); +return ; + } + + lpsp_capable ?seq_puts (m,"LPSP capable\n" ) :seq_puts (m,"LPSP incapable\n" ); +} + +static void +intel_lpsp_enable_info (struct seq_file *m,struct drm_connector *connector) +{ +struct drm_i915_private *dev_priv =to_i915 (connector->dev); +bool is_lpsp = false; + +if (INTEL_GEN (dev_priv) >=11 ) { + is_lpsp = !intel_lpsp_power_well_enabled (dev_priv, +ICL_DISP_PW_3 ); + }else if (INTEL_GEN (dev_priv) >=9 ) { + is_lpsp = !intel_lpsp_power_well_enabled (dev_priv, +SKL_DISP_PW_2 ); + }else if (IS_HASWELL (dev_priv) ||IS_BROADWELL (dev_priv)) { + is_lpsp = !intel_lpsp_power_well_enabled (dev_priv, +HSW_DISP_PW_GLOBAL ); + }else { +seq_puts (m,"LPSP not supported\n" ); +return ; + } + + is_lpsp ?seq_puts (m,"LPSP enabled\n" ) :seq_puts (m,"LPSP disabled\n" ); +} +static void intel_dp_info (struct seq_file *m,struct intel_connector *intel_connector) {
@@ -1987,6 +2077,17 @@ static int i915_hdcp_sink_capability_show(struct seq_file *m, void *data) }DEFINE_SHOW_ATTRIBUTE (i915_hdcp_sink_capability); +static int i915_lpsp_info_show (struct seq_file *m,void *data) +{ +struct drm_connector *connector = m->private; + +intel_lpsp_capable_info (m, connector); +intel_lpsp_enable_info (m, connector); + +return 0 ; +} +DEFINE_SHOW_ATTRIBUTE (i915_lpsp_info); +static int i915_dsc_fec_support_show (struct seq_file *m,void *data) {struct drm_connector *connector = m->private;
@@ -2130,5 +2231,8 @@ int intel_connector_debugfs_add(struct drm_connector *connector)debugfs_create_file ("i915_dsc_fec_support" ,S_IRUGO , root, connector, &i915_dsc_fec_support_fops); +debugfs_create_file ("i915_lpsp_info" ,0444 , root, + connector, &i915_lpsp_info_fops); +return 0 ; }
Signature · 6 lines
2.25.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [Intel-gfx] [PATCH v2 2/3] drm/i915: Add i915_lpsp_info debugfs
Quoted 25 lines · Anshuman Gupta
New
i915_pm_lpspigt solution approach relies on connector specific debugfs attributei915_lpsp_info, it exposes whether an output is capable of driving lpsp and exposes lpsp enablement info.v2:
- CI fixup.Signed-off-by Anshuman Gupta <[email protected]>--- .../drm/i915/display/intel_display_debugfs.c | 104 ++++++++++++++++++ 1 file changed, 104 insertions(+)drivers/gpu/drm/i915/display/intel_display_debugfs.c +1
-0@@ -9,6 +9,7 @@#include "i915_debugfs.h" #include "intel_csr.h" #include "intel_display_debugfs.h" +#include "intel_display_power.h" #include "intel_display_types.h" #include "intel_dp.h" #include "intel_fbc.h"
drivers/gpu/drm/i915/display/intel_display_debugfs.c static void intel_hdcp_info(struct seq_file *m, · line 618
Quoted 7 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c +4
-0@@ -611,6 +612,95 @@ static void intel_hdcp_info(struct seq_file *m,seq_puts (m,"\n" ); } +static bool intel_have_embedded_panel (struct drm_connector *connector) +{ +return connector->connector_type ==DRM_MODE_CONNECTOR_DSI || + connector->connector_type == DRM_MODE_CONNECTOR_eDP;
I know you don't care for this use case, but the function naming leads one to believe this checks for at least LVDS panels too.
Quoted 13 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c +13
-0+} + +static bool intel_have_gen9_lpsp_panel (struct drm_connector *connector) +{ +return intel_have_embedded_panel (connector) || + connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort; +} + +static int +intel_lpsp_power_well_enabled (struct drm_i915_private *dev_priv, +enum i915_power_well_id power_well_id) +{ +struct i915_power_domains *power_domains = &dev_priv->power_domains;
drivers/gpu/drm/i915/display/intel_display_debugfs.c static void intel_hdcp_info(struct seq_file *m, · line 641
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c +10
-0+struct i915_power_well *power_well =NULL , *pw_itr; +bool is_enabled; + +mutex_lock (&power_domains->lock); + +for_each_power_well (dev_priv, pw_itr) +if (pw_itr->desc->id == power_well_id) { + power_well = pw_itr; +break ; + }
I don't think this code has any business looking inside the guts of the power well code. I see that intel_hdcp.c does this kind of loop too, and that *also* shouldn't be doing that.
See intel_display_power_well_is_enabled(). Does what you want, and does it correctly. So really, the whole intel_lpsp_power_well_enabled() function shouldn't be added.
Quoted 25 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c +25
-0+ +if (drm_WARN_ON (&dev_priv->drm, !power_well)) { +mutex_unlock (&power_domains->lock); +/* Assume that BIOS has enabled the power well*/ +return true; + } + + is_enabled = !!power_well->count; +mutex_unlock (&power_domains->lock); + +return is_enabled; +} + +static void +intel_lpsp_capable_info (struct seq_file *m,struct drm_connector *connector) +{ +struct intel_encoder *encoder = +intel_attached_encoder (to_intel_connector (connector)); +struct drm_i915_private *dev_priv =to_i915 (connector->dev); +bool lpsp_capable = false; + +if (IS_TIGERLAKE (dev_priv) && encoder->port <=PORT_C ) { + lpsp_capable = true; + }else if (INTEL_GEN (dev_priv) >=11 &&intel_have_embedded_panel (connector)) { + lpsp_capable = true;
drivers/gpu/drm/i915/display/intel_display_debugfs.c static void intel_hdcp_info(struct seq_file *m, · line 676
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c +10
-0+ }else if (INTEL_GEN (dev_priv) >=9 && (encoder->port ==PORT_A && +intel_have_gen9_lpsp_panel (connector))) { + lpsp_capable = true; + }else if ((IS_HASWELL (dev_priv) ||IS_BROADWELL (dev_priv)) && + connector->connector_type == DRM_MODE_CONNECTOR_eDP) { + lpsp_capable = true; + }else { +seq_puts (m,"LPSP not supported\n" ); +return ; + }
The whole if ladder above looks suspect, and I'm not sure your helpers are helping here.
drivers/gpu/drm/i915/display/intel_display_debugfs.c static void intel_hdcp_info(struct seq_file *m, · line 678
Quoted 2 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c +2
-0+ + lpsp_capable ?seq_puts (m,"LPSP capable\n" ) :seq_puts (m,"LPSP incapable\n" );
lpsp_capable is always true when you end up here.
Quoted 7 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c +7
-0+} + +static void +intel_lpsp_enable_info (struct seq_file *m,struct drm_connector *connector) +{ +struct drm_i915_private *dev_priv =to_i915 (connector->dev); +bool is_lpsp = false;
drivers/gpu/drm/i915/display/intel_display_debugfs.c static void intel_hdcp_info(struct seq_file *m, · line 695
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c +10
-0+ +if (INTEL_GEN (dev_priv) >=11 ) { + is_lpsp = !intel_lpsp_power_well_enabled (dev_priv, +ICL_DISP_PW_3 ); + }else if (INTEL_GEN (dev_priv) >=9 ) { + is_lpsp = !intel_lpsp_power_well_enabled (dev_priv, +SKL_DISP_PW_2 ); + }else if (IS_HASWELL (dev_priv) ||IS_BROADWELL (dev_priv)) { + is_lpsp = !intel_lpsp_power_well_enabled (dev_priv, +HSW_DISP_PW_GLOBAL );
The abstraction should probably be to figure out the correct power well id based on the platform, and then using the generic power well enabled call.
drivers/gpu/drm/i915/display/intel_display_debugfs.c static void intel_hdcp_info(struct seq_file *m, · line 697
Quoted 2 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c +2
-0+ }else { +seq_puts (m,"LPSP not supported\n" );
The "LPSP not supported" case differs from lpsp capable. Huh?
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c +6
-0+return ; + } + + is_lpsp ?seq_puts (m,"LPSP enabled\n" ) :seq_puts (m,"LPSP disabled\n" ); +} +static void intel_dp_info (struct seq_file *m,struct intel_connector *intel_connector) {
drivers/gpu/drm/i915/display/intel_display_debugfs.c static int i915_hdcp_sink_capability_show(struct seq_file *m, void *data) · line 2085
Quoted 9 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c +6
-0@@ -1987,6 +2077,17 @@ static int i915_hdcp_sink_capability_show(struct seq_file *m, void *data) }DEFINE_SHOW_ATTRIBUTE (i915_hdcp_sink_capability); +static int i915_lpsp_info_show (struct seq_file *m,void *data) +{ +struct drm_connector *connector = m->private; + +intel_lpsp_capable_info (m, connector); +intel_lpsp_enable_info (m, connector);
I'm not sure having these two separate do you any good. Probably would help *not* separating these.
Quoted 9 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c +5
-0+ +return 0 ; +} +DEFINE_SHOW_ATTRIBUTE (i915_lpsp_info); +static int i915_dsc_fec_support_show (struct seq_file *m,void *data) {struct drm_connector *connector = m->private;
drivers/gpu/drm/i915/display/intel_display_debugfs.c int intel_connector_debugfs_add(struct drm_connector *connector) · line 2235
Quoted 5 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c +2
-0@@ -2130,5 +2231,8 @@ int intel_connector_debugfs_add(struct drm_connector *connector)debugfs_create_file ("i915_dsc_fec_support" ,S_IRUGO , root, connector, &i915_dsc_fec_support_fops); +debugfs_create_file ("i915_lpsp_info" ,0444 , root, + connector, &i915_lpsp_info_fops);
The question is, why are you creating this for connectors that do not and can not support lpsp to begin with? Your igt test should check for the existence of the file anyway.
BR,
Jani.
Quoted 3 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c +1
-0+return 0 ; }
Signature · 5 lines
Jani Nikula, Intel Open Source Graphics Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [Intel-gfx] [PATCH v2 2/3] drm/i915: Add i915_lpsp_info debugfs
Quoted 65 lines · Jani Nikula
Quoted 25 lines · Anshuman Gupta
New
i915_pm_lpspigt solution approach relies on connector specific debugfs attributei915_lpsp_info, it exposes whether an output is capable of driving lpsp and exposes lpsp enablement info.v2:
- CI fixup.Signed-off-by Anshuman Gupta <[email protected]>--- .../drm/i915/display/intel_display_debugfs.c | 104 ++++++++++++++++++ 1 file changed, 104 insertions(+)drivers/gpu/drm/i915/display/intel_display_debugfs.c +1
-0@@ -9,6 +9,7 @@#include "i915_debugfs.h" #include "intel_csr.h" #include "intel_display_debugfs.h" +#include "intel_display_power.h" #include "intel_display_types.h" #include "intel_dp.h" #include "intel_fbc.h" drivers/gpu/drm/i915/display/intel_display_debugfs.c static void intel_hdcp_info(struct seq_file *m, · line 618
Quoted 7 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c +4
-0@@ -611,6 +612,95 @@ static void intel_hdcp_info(struct seq_file *m,seq_puts (m,"\n" ); } +static bool intel_have_embedded_panel (struct drm_connector *connector) +{ +return connector->connector_type ==DRM_MODE_CONNECTOR_DSI || + connector->connector_type == DRM_MODE_CONNECTOR_eDP;I know you don't care for this use case, but the function naming leads one to believe this checks for at least LVDS panels too.
Quoted 13 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c +13
-0+} + +static bool intel_have_gen9_lpsp_panel (struct drm_connector *connector) +{ +return intel_have_embedded_panel (connector) || + connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort; +} + +static int +intel_lpsp_power_well_enabled (struct drm_i915_private *dev_priv, +enum i915_power_well_id power_well_id) +{ +struct i915_power_domains *power_domains = &dev_priv->power_domains;drivers/gpu/drm/i915/display/intel_display_debugfs.c static void intel_hdcp_info(struct seq_file *m, · line 641
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c +10
-0+struct i915_power_well *power_well =NULL , *pw_itr; +bool is_enabled; + +mutex_lock (&power_domains->lock); + +for_each_power_well (dev_priv, pw_itr) +if (pw_itr->desc->id == power_well_id) { + power_well = pw_itr; +break ; + }I don't think this code has any business looking inside the guts of the power well code. I see that
intel_hdcp.cdoes this kind of loop too, and that *also* shouldn't be doing that.
Quoted 3 lines
See
intel_display_power_well_is_enabled(). Does what you want, and does it correctly. So really, the wholeintel_lpsp_power_well_enabled()function shouldn't be added.
Thanks Jani for review comments, actually at v1 version i had used used intel_display_power_well_is_enabled,
but i was getting below DMEAG_WARN on a CI run,
"PM wakelock ref not held during HW access"
Apperently it seemed to me intel_display_power_well_is_enabled() is meant for internal use in intel_display_power.c as it was not declared in header and it didn't held any PM wakeref.
May be i require below sequence to use intel_display_power_well_is_enabled,
wakeref = intel_runtime_pm_get(&dev_priv->runtime_pm); intel_display_power_well_is_enabled() intel_runtime_pm_put(&dev_priv->runtime_pm, wakeref);
Please correct me if i am wrong here.
Quoted 67 lines
Quoted 26 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c +25
-0+ +if (drm_WARN_ON (&dev_priv->drm, !power_well)) { +mutex_unlock (&power_domains->lock); +/* Assume that BIOS has enabled the power well*/ +return true; + } + + is_enabled = !!power_well->count; +mutex_unlock (&power_domains->lock); + +return is_enabled; +} + +static void +intel_lpsp_capable_info (struct seq_file *m,struct drm_connector *connector) +{ +struct intel_encoder *encoder = +intel_attached_encoder (to_intel_connector (connector)); +struct drm_i915_private *dev_priv =to_i915 (connector->dev); +bool lpsp_capable = false; + +if (IS_TIGERLAKE (dev_priv) && encoder->port <=PORT_C ) { + lpsp_capable = true; + }else if (INTEL_GEN (dev_priv) >=11 &&intel_have_embedded_panel (connector)) { + lpsp_capable = true;drivers/gpu/drm/i915/display/intel_display_debugfs.c static void intel_hdcp_info(struct seq_file *m, · line 676
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c +10
-0+ }else if (INTEL_GEN (dev_priv) >=9 && (encoder->port ==PORT_A && +intel_have_gen9_lpsp_panel (connector))) { + lpsp_capable = true; + }else if ((IS_HASWELL (dev_priv) ||IS_BROADWELL (dev_priv)) && + connector->connector_type == DRM_MODE_CONNECTOR_eDP) { + lpsp_capable = true; + }else { +seq_puts (m,"LPSP not supported\n" ); +return ; + }The whole if ladder above looks suspect, and I'm not sure your helpers are helping here.
drivers/gpu/drm/i915/display/intel_display_debugfs.c static void intel_hdcp_info(struct seq_file *m, · line 678
Quoted 2 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c +2
-0+ + lpsp_capable ?seq_puts (m,"LPSP capable\n" ) :seq_puts (m,"LPSP incapable\n" );
lpsp_capableis always true when you end up here.Quoted 7 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c +7
-0+} + +static void +intel_lpsp_enable_info (struct seq_file *m,struct drm_connector *connector) +{ +struct drm_i915_private *dev_priv =to_i915 (connector->dev); +bool is_lpsp = false;drivers/gpu/drm/i915/display/intel_display_debugfs.c static void intel_hdcp_info(struct seq_file *m, · line 695
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c +10
-0+ +if (INTEL_GEN (dev_priv) >=11 ) { + is_lpsp = !intel_lpsp_power_well_enabled (dev_priv, +ICL_DISP_PW_3 ); + }else if (INTEL_GEN (dev_priv) >=9 ) { + is_lpsp = !intel_lpsp_power_well_enabled (dev_priv, +SKL_DISP_PW_2 ); + }else if (IS_HASWELL (dev_priv) ||IS_BROADWELL (dev_priv)) { + is_lpsp = !intel_lpsp_power_well_enabled (dev_priv, +HSW_DISP_PW_GLOBAL );The abstraction should probably be to figure out the correct power well id based on the platform, and then using the generic power well enabled call.
Quoted 4 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c static void intel_hdcp_info(struct seq_file *m, · line 697
Quoted 2 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c +2
-0+ }else { +seq_puts (m,"LPSP not supported\n" );The "LPSP not supported" case differs from lpsp capable. Huh?
My bad while fixing regression on legacy platform i messed it, i will fix this.
Quoted 36 lines
Quoted 11 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c +6
-0+return ; + } + + is_lpsp ?seq_puts (m,"LPSP enabled\n" ) :seq_puts (m,"LPSP disabled\n" ); +} +static void intel_dp_info (struct seq_file *m,struct intel_connector *intel_connector) {drivers/gpu/drm/i915/display/intel_display_debugfs.c static int i915_hdcp_sink_capability_show(struct seq_file *m, void *data) · line 2085
Quoted 9 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c +6
-0@@ -1987,6 +2077,17 @@ static int i915_hdcp_sink_capability_show(struct seq_file *m, void *data) }DEFINE_SHOW_ATTRIBUTE (i915_hdcp_sink_capability); +static int i915_lpsp_info_show (struct seq_file *m,void *data) +{ +struct drm_connector *connector = m->private; + +intel_lpsp_capable_info (m, connector); +intel_lpsp_enable_info (m, connector);I'm not sure having these two separate do you any good. Probably would help *not* separating these.
Quoted 12 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c +5
-0+ +return 0 ; +} +DEFINE_SHOW_ATTRIBUTE (i915_lpsp_info); +static int i915_dsc_fec_support_show (struct seq_file *m,void *data) {struct drm_connector *connector = m->private;@@ -2130,5 +2231,8 @@ int intel_connector_debugfs_add(struct drm_connector *connector)debugfs_create_file ("i915_dsc_fec_support" ,S_IRUGO , root, connector, &i915_dsc_fec_support_fops);
Quoted 6 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c int intel_connector_debugfs_add(struct drm_connector *connector) · line 2235
Quoted 2 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c +2
-0+debugfs_create_file ("i915_lpsp_info" ,0444 , root, + connector, &i915_lpsp_info_fops);The question is, why are you creating this for connectors that do not and can not support lpsp to begin with? Your igt test should check for the existence of the file anyway.
igt checks for file existence and it will assert the subtest but this will also fail the test as earlier legacy platform were passing non-lpsp i915_pm_rpm test considering all non-edp paneld are non-lpsp
https://patchwork.freedesktop.org/patch/358652/?series=74647&rev=4
May be igt lib function i915_output_is_lpsp_capable() should return false for lgeacy platform and legacy connector,
Please correct me if there is any other better way to handle that.
Quoted 11 lines
BR,
Jani.Quoted 3 lines
drivers/gpu/drm/i915/display/intel_display_debugfs.c +1
-0+return 0 ; }Signature · 1 line
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 3/3 drm/i915: Add connector dbgfs for all connectors
In reply to Anshuman GuptaAdd connector debugfs attributes for each intel
connector which is getting register.
v2:
- adding connector debugfs for each connector in intel_connector_register() to fix CI failure for legacy connectors.
--- drivers/gpu/drm/i915/display/intel_connector.c | 3 +++ drivers/gpu/drm/i915/display/intel_dp.c | 3 --- drivers/gpu/drm/i915/display/intel_hdmi.c | 3 --- 3 files changed, 3 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/display/intel_connector.c +3 -0
@@ -33,6 +33,7 @@#include "i915_drv.h" #include "intel_connector.h" +#include "intel_display_debugfs.h" #include "intel_display_types.h" #include "intel_hdcp.h"
@@ -123,6 +124,8 @@ int intel_connector_register(struct drm_connector *connector) goto err_backlight; } +intel_connector_debugfs_add (connector); +return 0 ; err_backlight:
drivers/gpu/drm/i915/display/intel_dp.c +0 -3
@@ -48,7 +48,6 @@#include "intel_audio.h" #include "intel_connector.h" #include "intel_ddi.h" -#include "intel_display_debugfs.h" #include "intel_display_types.h" #include "intel_dp.h" #include "intel_dp_link_training.h"
@@ -6204,8 +6203,6 @@ intel_dp_connector_register(struct drm_connector *connector)if (ret)return ret; -intel_connector_debugfs_add (connector); -DRM_DEBUG_KMS ("registering %s bus for %s\n" , intel_dp->aux.name, connector->kdev->kobj.name);
drivers/gpu/drm/i915/display/intel_hdmi.c +0 -3
@@ -44,7 +44,6 @@#include "intel_audio.h" #include "intel_connector.h" #include "intel_ddi.h" -#include "intel_display_debugfs.h" #include "intel_display_types.h" #include "intel_dp.h" #include "intel_dpio_phy.h"
@@ -2813,8 +2812,6 @@ intel_hdmi_connector_register(struct drm_connector *connector)if (ret)return ret; -intel_connector_debugfs_add (connector); -intel_hdmi_create_i2c_symlink (connector);return ret;
Signature · 6 lines
2.25.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [Intel-gfx] [PATCH v2 3/3] drm/i915: Add connector dbgfs for all connectors
Quoted 2 lines · Anshuman Gupta
Add connector debugfs attributes for each intel
connector which is getting register.
Okay, so this is a good idea, and for that,
Quoted 3 lines
v2:
- adding connector debugfs for each connector inintel_connector_register()to fix CI failure for legacy connectors.
However, it's *not* a good idea for the purpose of registering the lpsp debugfs file for every connector out there. There's no point in that, at all. You need to register the file only when it makes sense in intel_connector_debugfs_add(), and not for every conceivable connector out there.
And your igt test absolutely *must* check if the debugfs is there or not, and handle it gracefully.
BR,
Jani.
Quoted 71 lines
Signed-off-by Anshuman Gupta <[email protected]>--- drivers/gpu/drm/i915/display/intel_connector.c | 3 +++ drivers/gpu/drm/i915/display/intel_dp.c | 3 --- drivers/gpu/drm/i915/display/intel_hdmi.c | 3 --- 3 files changed, 3 insertions(+), 6 deletions(-)drivers/gpu/drm/i915/display/intel_connector.c +3
-0@@ -33,6 +33,7 @@#include "i915_drv.h" #include "intel_connector.h" +#include "intel_display_debugfs.h" #include "intel_display_types.h" #include "intel_hdcp.h" @@ -123,6 +124,8 @@ int intel_connector_register(struct drm_connector *connector) goto err_backlight; } +intel_connector_debugfs_add (connector); +return 0 ; err_backlight:drivers/gpu/drm/i915/display/intel_dp.c +0
-3@@ -48,7 +48,6 @@#include "intel_audio.h" #include "intel_connector.h" #include "intel_ddi.h" -#include "intel_display_debugfs.h" #include "intel_display_types.h" #include "intel_dp.h" #include "intel_dp_link_training.h" @@ -6204,8 +6203,6 @@ intel_dp_connector_register(struct drm_connector *connector)if (ret)return ret; -intel_connector_debugfs_add (connector); -DRM_DEBUG_KMS ("registering %s bus for %s\n" , intel_dp->aux.name, connector->kdev->kobj.name);drivers/gpu/drm/i915/display/intel_hdmi.c +0
-3@@ -44,7 +44,6 @@#include "intel_audio.h" #include "intel_connector.h" #include "intel_ddi.h" -#include "intel_display_debugfs.h" #include "intel_display_types.h" #include "intel_dp.h" #include "intel_dpio_phy.h" @@ -2813,8 +2812,6 @@ intel_hdmi_connector_register(struct drm_connector *connector)if (ret)return ret; -intel_connector_debugfs_add (connector); -intel_hdmi_create_i2c_symlink (connector);return ret;
Signature · 5 lines
Jani Nikula, Intel Open Source Graphics Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI[Intel-gfx] ✗ Fi.CI.BUILD: failure for i915 lpsp support for lpsp igt (rev4)
In reply to Anshuman Gupta== Series Details ==
== Series Details ==
Series: i915 lpsp support for lpsp igt (rev4)
URL : https://patchwork.freedesktop.org/series/74648/
State : failure
== Summary ==
Patch is empty.
When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort".
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx