Skip to contentSkip to conversation

bugfix/improvements for IMX-based modules

PATCH New Igor Opaniuk 3 participants 24 messages Mar 27, 2020 – Apr 18, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v2 cover bugfix/improvements for IMX-based modules

1. Enable relocation of fdt and initrd for all Toradex modules;
2. Add nfsboot wrapper to env for Verdin i.MX8M Mini
3. i.MX8M Mini EVK/Verdin: adjust dram size in case bl32 is used
4. Set gpr1 ENET_CLK_SEL for Colibri iMX6S/DL, which fixes PHY negotiation issues.
5. Colibri i.MX8QXP/QM pd_dma nodes should be accessible before U-Boot relocation.

v2:
- Applied R-b tags
- Put all pending patches into one patch-series to easier track stuff

Igor Opaniuk (13):
ARM: dts: imx8qm-apalis: replace dm-spl with dm-pre-proper
ARM: dts: imx8qxp-colibri: replace dm-spl with dm-pre-proper
ARM: dts: imx8qm-apalis: dm-pre-proper for pd_dma nodes
ARM: dts: imx8qxp-colibri: dm-pre-proper for pd_dma nodes
colibri_imx6: set gpr1 ENET_CLK_SEL
verdin-imx8mm: adjust dram size in case bl32 is used
imx8mm_evk: adjust dram size in case bl32 is used
verdin-imx8mm: add nfsboot wrapper to env
colibri_vf: enable relocation of fdt and initrd
colibri_imx7: enable relocation of fdt and initrd
apalis_imx6: enable relocation of fdt and initrd
colibri-imx6ull: enable relocation of fdt and initrd
colibri_imx6: enable relocation of fdt and initrd

 arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi   | 70 +++++++++++---------
 arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi | 68 +++++++++++--------
 board/freescale/imx8mm_evk/imx8mm_evk.c      |  6 +-
 board/toradex/colibri_imx6/colibri_imx6.c    |  3 +
 board/toradex/verdin-imx8mm/verdin-imx8mm.c  |  7 +-
 include/configs/apalis_imx6.h                |  2 -
 include/configs/colibri-imx6ull.h            |  2 -
 include/configs/colibri_imx6.h               |  2 -
 include/configs/colibri_imx7.h               |  2 -
 include/configs/colibri_vf.h                 |  2 -
 include/configs/verdin-imx8mm.h              |  6 ++
 11 files changed, 99 insertions(+), 71 deletions(-)
Signature · 1 line
2.17.1
#1 lore raw

PATCH v2 1/13 ARM: dts: imx8qm-apalis: replace dm-spl with dm-pre-proper

From: Igor Opaniuk <[email protected]>

For non-SPL/TPL setups dm-spl, dm-tpl, dm-pre-proper, dm-pre-reloc are handled equally, forcing the nodes with these properties
to be accessible and device being probed
before pre-relocation of U-Boot proper (drivers/core/util.c):

bool ofnode_pre_reloc(ofnode node)

{
    /* for SPL and TPL the remaining nodes after the fdtgrep 1st pass
     * had property dm-pre-reloc or u-boot,dm-spl/tpl.
     * They are removed in final dtb (fdtgrep 2nd pass)
     */
    return true;
    if (ofnode_read_bool(node, "u-boot,dm-pre-reloc"))
        return true;
    if (ofnode_read_bool(node, "u-boot,dm-pre-proper"))
        return true;

    /*
     * In regular builds individual spl and tpl handling both
     * count as handled pre-relocation for later second init.
     */
    if (ofnode_read_bool(node, "u-boot,dm-spl") ||
        ofnode_read_bool(node, "u-boot,dm-tpl"))
        return true;

    return false;
}

Howewer, to avoid confusion in future, replace dm-spl %s/dm-spl/dm-pre-proper/g properties to dm-pre-proper to explicitly state that they are handled during pre-relocation stage of U-Boot proper.

---

 arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi | 62 +++++++++++-----------
 1 file changed, 31 insertions(+), 31 deletions(-)
arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi +31 -31
index 7b1a9550e4..6cdf58c8ad 100644
@@ -4,125 +4,125 @@
  */
 
 &mu {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &clk {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &iomuxc {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &pd_lsio {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &pd_lsio_gpio0 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &pd_lsio_gpio1 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &pd_lsio_gpio2 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &pd_lsio_gpio3 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &pd_lsio_gpio4 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &pd_lsio_gpio5 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &pd_lsio_gpio6 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &pd_lsio_gpio7 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &pd_conn {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &pd_conn_sdch0 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &pd_conn_sdch1 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &pd_conn_sdch2 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &gpio0 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &gpio1 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &gpio2 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &gpio3 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &gpio4 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &gpio5 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &gpio6 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &gpio7 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &lpuart0 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &lpuart1 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &lpuart2 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &lpuart3 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &usdhc1 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &usdhc2 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &usdhc3 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
Signature · 1 line
2.17.1
#2 lore raw

PATCH v2 2/13 ARM: dts: imx8qxp-colibri: replace dm-spl with dm-pre-proper

In reply to Igor Opaniuk

From: Igor Opaniuk <[email protected]>

For non-SPL/TPL setups dm-spl, dm-tpl, dm-pre-proper, dm-pre-reloc are handled equally, forcing the nodes with these properties
to be accessible and device being probed
before pre-relocation of U-Boot proper (drivers/core/util.c):

bool ofnode_pre_reloc(ofnode node)

{
    /* for SPL and TPL the remaining nodes after the fdtgrep 1st pass
     * had property dm-pre-reloc or u-boot,dm-spl/tpl.
     * They are removed in final dtb (fdtgrep 2nd pass)
     */
    return true;
    if (ofnode_read_bool(node, "u-boot,dm-pre-reloc"))
        return true;
    if (ofnode_read_bool(node, "u-boot,dm-pre-proper"))
        return true;

    /*
     * In regular builds individual spl and tpl handling both
     * count as handled pre-relocation for later second init.
     */
    if (ofnode_read_bool(node, "u-boot,dm-spl") ||
        ofnode_read_bool(node, "u-boot,dm-tpl"))
        return true;

    return false;
}

Howewer, to avoid confusion in future, replace dm-spl %s/dm-spl/dm-pre-proper/g properties to dm-pre-proper to explicitly state that they are handled during pre-relocation stage of U-Boot proper.

---

 arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi | 56 ++++++++++----------
 1 file changed, 28 insertions(+), 28 deletions(-)
arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi +28 -28
index 5b061f94ba..87de9b5653 100644
@@ -5,113 +5,113 @@
 
 &{/imx8qx-pm} {
 
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &mu {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &clk {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &iomuxc {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &pd_lsio {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &pd_lsio_gpio0 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &pd_lsio_gpio1 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &pd_lsio_gpio2 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &pd_lsio_gpio3 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &pd_lsio_gpio4 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &pd_lsio_gpio5 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &pd_lsio_gpio6 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &pd_lsio_gpio7 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &pd_conn {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &pd_conn_sdch0 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &pd_conn_sdch1 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &pd_conn_sdch2 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &gpio0 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &gpio1 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &gpio2 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &gpio3 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &gpio4 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &gpio5 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &gpio6 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &gpio7 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &lpuart3 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &usdhc1 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
 
 &usdhc2 {
-	u-boot,dm-spl;
+	u-boot,dm-pre-proper;
 };
Signature · 1 line
2.17.1
#3 lore raw

PATCH v2 3/13 ARM: dts: imx8qm-apalis: dm-pre-proper for pd_dma nodes

In reply to Igor Opaniuk

From: Igor Opaniuk <[email protected]>

pd_dma_* nodes should be accessible during pre-relocation stage of U-Boot proper for properly handling power domains.

This fixes the issue with permanent failing of invocation of power_domain_get_by_index() in the common code of DM power domain uclass (drivers/power/domain/power-domain-uclass.c).

Fixes f0cc4eae9a ("core: device: use dev_power_domain_on")

---

 arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi +8 -0
index 6cdf58c8ad..956d724979 100644
@@ -51,6 +51,14 @@
 	u-boot,dm-pre-proper;
 };
 
+&pd_dma {
+	u-boot,dm-pre-proper;
+};
+
+&pd_dma_lpuart1 {
+	u-boot,dm-pre-proper;
+};
+
 &pd_conn {
 	u-boot,dm-pre-proper;
 };
Signature · 1 line
2.17.1
#4 lore raw

PATCH v2 4/13 ARM: dts: imx8qxp-colibri: dm-pre-proper for pd_dma nodes

In reply to Igor Opaniuk

From: Igor Opaniuk <[email protected]>

pd_dma_* nodes should be accessible during pre-relocation stage of U-Boot proper for properly handling power domains.

This fixes the issue with permanent failing of invocation of power_domain_get_by_index() in the common code of DM power domain uclass (drivers/power/domain/power-domain-uclass.c).

Fixes f0cc4eae9a ("core: device: use dev_power_domain_on")

---

 arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)
arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi +12 -0
index 87de9b5653..322429a98a 100644
@@ -56,6 +56,18 @@
 	u-boot,dm-pre-proper;
 };
 
+&pd_dma {
+	u-boot,dm-pre-proper;
+};
+
+&pd_dma_lpuart0 {
+	u-boot,dm-pre-proper;
+};
+
+&pd_dma_lpuart3 {
+	u-boot,dm-pre-proper;
+};
+
 &pd_conn {
 	u-boot,dm-pre-proper;
 };
Signature · 1 line
2.17.1
#5 lore raw

PATCH v2 5/13 colibri_imx6: set gpr1 ENET_CLK_SEL

In reply to Igor Opaniuk

From: Igor Opaniuk <[email protected]>

This fixes the issue when PHY auto negotiation never completes.

Fixes 431cd76dd8("colibri_imx6: migrate to DM_ETH")

---

 board/toradex/colibri_imx6/colibri_imx6.c | 3 +++
 1 file changed, 3 insertions(+)
board/toradex/colibri_imx6/colibri_imx6.c +3 -0
index f04b749311..d11401ecab 100644
@@ -354,12 +354,15 @@ int board_phy_config(struct phy_device *phydev)
 int setup_fec(void)
 {
 	int ret;
+	struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
 
 	/* provide the PHY clock from the i.MX 6 */
 	ret = enable_fec_anatop_clock(0, ENET_50MHZ);
 	if (ret)
 		return ret;
 
+	setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_ENET_CLK_SEL_MASK);
+
 	return 0;
 }
 
Signature · 1 line
2.17.1
#6 lore raw

PATCH v2 6/13 verdin-imx8mm: adjust dram size in case bl32 is used

In reply to Igor Opaniuk

From: Igor Opaniuk <[email protected]>

Adjust DRAM size in case BL32 secure payload is loaded (OP-TEE/Trusty), so during MMU initialization U-Boot won't touch this mem area.

BL32 is loaded to the end of DRAM, bl32 payload size is read from rom_pointer[1]. This relates to the issue described in 59efa6b52b("imx8m: Fix MMU table issue for OPTEE memory").

---

 board/toradex/verdin-imx8mm/verdin-imx8mm.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
board/toradex/verdin-imx8mm/verdin-imx8mm.c +6 -1
index 16b9fa1ec1..cb9b4e3b0a 100644
@@ -5,6 +5,7 @@
 
 #include <common.h>
 #include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
 #include <asm/io.h>
 #include <miiphy.h>
 #include <netdev.h>
@@ -13,7 +14,11 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int dram_init(void)
 {
-	gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
+	/* rom_pointer[1] contains the size of TEE occupies */
+	if (rom_pointer[1])
+		gd->ram_size = PHYS_SDRAM_SIZE - rom_pointer[1];
+	else
+		gd->ram_size = PHYS_SDRAM_SIZE;
 
 	return 0;
 }
Signature · 1 line
2.17.1
#7 lore raw

PATCH v2 6/13 verdin-imx8mm: adjust dram size in case bl32 is used

Quoted 7 lines

From: Igor Opaniuk <[email protected]>
Adjust DRAM size in case BL32 secure payload is loaded (OP-TEE/Trusty), so during MMU initialization U-Boot won't touch this mem area. BL32 is loaded to the end of DRAM, bl32 payload size is read from rom_pointer[1]. This relates to the issue described in 59efa6b52b("imx8m: Fix MMU table issue for OPTEE memory").

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#8 lore raw

PATCH v2 7/13 imx8mm_evk: adjust dram size in case bl32 is used

In reply to Igor Opaniuk

From: Igor Opaniuk <[email protected]>

Adjust DRAM size in case BL32 secure payload is loaded (OP-TEE/Trusty), so during MMU initialization U-Boot won't touch this mem area.

BL32 is loaded to the end of DRAM, bl32 payload size is read from rom_pointer[1]. This relates to the issue described in 59efa6b52b("imx8m: Fix MMU table issue for OPTEE memory").

---

 board/freescale/imx8mm_evk/imx8mm_evk.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
board/freescale/imx8mm_evk/imx8mm_evk.c +5 -1
index c5fd940eeb..53ebb949df 100644
@@ -15,7 +15,11 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int dram_init(void)
 {
-	gd->ram_size = PHYS_SDRAM_SIZE;
+	/* rom_pointer[1] contains the size of TEE occupies */
+	if (rom_pointer[1])
+		gd->ram_size = PHYS_SDRAM_SIZE - rom_pointer[1];
+	else
+		gd->ram_size = PHYS_SDRAM_SIZE;
 
 	return 0;
 }
Signature · 1 line
2.17.1
#9 lore raw

PATCH v2 7/13 imx8mm_evk: adjust dram size in case bl32 is used

Quoted 23 lines · Igor Opaniuk

From: Igor Opaniuk <[email protected]>

Adjust DRAM size in case BL32 secure payload is loaded (OP-TEE/Trusty), so during MMU initialization U-Boot won't touch this mem area.

BL32 is loaded to the end of DRAM, bl32 payload size is read from rom_pointer[1]. This relates to the issue described in 59efa6b52b("imx8m: Fix MMU table issue for OPTEE memory").

---

 board/freescale/imx8mm_evk/imx8mm_evk.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
board/freescale/imx8mm_evk/imx8mm_evk.c +0 -0
index c5fd940eeb..53ebb949df 100644
@@ -15,7 +15,11 @@ DECLARE_GLOBAL_DATA_PTR;
 

board/freescale/imx8mm_evk/imx8mm_evk.c DECLARE_GLOBAL_DATA_PTR; · line 24

Quoted 10 lines
board/freescale/imx8mm_evk/imx8mm_evk.c +5 -1
 int dram_init(void)
 {
-       gd->ram_size = PHYS_SDRAM_SIZE;
 
 
+       /* rom_pointer[1] contains the size of TEE occupies */
+       if (rom_pointer[1])
+               gd->ram_size = PHYS_SDRAM_SIZE - rom_pointer[1];
+       else
+               gd->ram_size = PHYS_SDRAM_SIZE;

Is not this code equivalent to just one line?

      gd->ram_size = PHYS_SDRAM_SIZE - rom_pointer[1];

If rom_pointer[1] == 0, so the gd->ram_size gets the PHYS_SDRAM_SIZE value.

Quoted 6 lines
board/freescale/imx8mm_evk/imx8mm_evk.c +0 -0
        return 0;

}
--
2.17.1

Signature · 5 lines
Best regards
Oleksandr Suvorov

Toradex AG
Ebenaustrasse 10 | 6048 Horw | Switzerland | T: +41 41 500 48 00
#10 lore raw

PATCH v2 7/13 imx8mm_evk: adjust dram size in case bl32 is used

In reply to Igor Opaniuk
Quoted 7 lines

From: Igor Opaniuk <[email protected]>
Adjust DRAM size in case BL32 secure payload is loaded (OP-TEE/Trusty), so during MMU initialization U-Boot won't touch this mem area. BL32 is loaded to the end of DRAM, bl32 payload size is read from rom_pointer[1]. This relates to the issue described in 59efa6b52b("imx8m: Fix MMU table issue for OPTEE memory").

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#11 lore raw

PATCH v2 8/13 verdin-imx8mm: add nfsboot wrapper to env

In reply to Igor Opaniuk

From: Igor Opaniuk <[email protected]>

Add nfsboot wrapper to env to boot Linux kernel from TFTP/NFS.

---

 include/configs/verdin-imx8mm.h | 6 ++++++
 1 file changed, 6 insertions(+)
include/configs/verdin-imx8mm.h +6 -0
index dc0a2efec6..82bff3608c 100644
@@ -66,6 +66,12 @@
 	"initrd_addr=0x43800000\0" \
 	"initrd_high=0xffffffffffffffff\0" \
 	"kernel_image=Image\0" \
+	"netargs=setenv bootargs console=${console},${baudrate} " \
+		"root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \
+		"\0" \
+	"nfsboot=run netargs; dhcp ${loadaddr} ${kernel_image}; " \
+		"tftp ${fdt_addr} verdin/${fdtfile}; " \
+		"booti ${loadaddr} - ${fdt_addr}\0" \
 	"setup=setenv setupargs console=${console},${baudrate} " \
 		"console=tty1 consoleblank=0 earlycon\0" \
 	"update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
Signature · 1 line
2.17.1
#12 lore raw

PATCH v2 8/13 verdin-imx8mm: add nfsboot wrapper to env

Quoted 6 lines · Igor Opaniuk

From: Igor Opaniuk <[email protected]>

Add nfsboot wrapper to env to boot Linux kernel from TFTP/NFS.

Quoted 25 lines

---

 include/configs/verdin-imx8mm.h | 6 ++++++
 1 file changed, 6 insertions(+)
include/configs/verdin-imx8mm.h +6 -1
index dc0a2efec6..82bff3608c 100644
@@ -66,6 +66,12 @@
        "initrd_addr=0x43800000\0" \
        "initrd_high=0xffffffffffffffff\0" \
        "kernel_image=Image\0" \
+       "netargs=setenv bootargs console=${console},${baudrate} " \
+               "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \
+               "\0" \
+       "nfsboot=run netargs; dhcp ${loadaddr} ${kernel_image}; " \
+               "tftp ${fdt_addr} verdin/${fdtfile}; " \
+               "booti ${loadaddr} - ${fdt_addr}\0" \
        "setup=setenv setupargs console=${console},${baudrate} " \
                "console=tty1 consoleblank=0 earlycon\0" \
        "update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
--

2.17.1

Signature · 5 lines
Best regards
Oleksandr Suvorov

Toradex AG
Ebenaustrasse 10 | 6048 Horw | Switzerland | T: +41 41 500 48 00
#13 lore raw

PATCH v2 8/13 verdin-imx8mm: add nfsboot wrapper to env

In reply to Igor Opaniuk
Quoted 4 lines

From: Igor Opaniuk <[email protected]>
Add nfsboot wrapper to env to boot Linux kernel from TFTP/NFS.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#14 lore raw

PATCH v2 9/13 colibri_vf: enable relocation of fdt and initrd

In reply to Igor Opaniuk

From: Igor Opaniuk <[email protected]>

Remove 'fdt_high' and 'initrd_high' environment variables (set to 0xFFFFFFFF) from default environment which prevents relocation of FDT and initrd. Rely on 'bootm_size' value instead to safely relocate kernel, device tree and initrd.

---

 include/configs/colibri_vf.h | 2 --
 1 file changed, 2 deletions(-)
include/configs/colibri_vf.h +0 -2
index 1478ea844e..b03ccaf094 100644
@@ -51,8 +51,6 @@
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"bootm_size=0x10000000\0" \
 	"fdt_addr_r=0x82000000\0" \
-	"fdt_high=0xffffffff\0" \
-	"initrd_high=0xffffffff\0" \
 	"kernel_addr_r=0x81000000\0" \
 	"pxefile_addr_r=0x87100000\0" \
 	"ramdisk_addr_r=0x82100000\0" \
Signature · 1 line
2.17.1
#15 lore raw

PATCH v2 9/13 colibri_vf: enable relocation of fdt and initrd

Quoted 7 lines

From: Igor Opaniuk <[email protected]>
Remove 'fdt_high' and 'initrd_high' environment variables (set to 0xFFFFFFFF) from default environment which prevents relocation of FDT and initrd. Rely on 'bootm_size' value instead to safely relocate kernel, device tree and initrd.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#16 lore raw

PATCH v2 10/13 colibri_imx7: enable relocation of fdt and initrd

In reply to Igor Opaniuk

From: Igor Opaniuk <[email protected]>

Remove 'fdt_high' and 'initrd_high' environment variables (set to 0xFFFFFFFF) from default environment which prevents relocation of FDT and initrd. Rely on 'bootm_size' value instead to safely relocate kernel, device tree and initrd.

---

 include/configs/colibri_imx7.h | 2 --
 1 file changed, 2 deletions(-)
include/configs/colibri_imx7.h +0 -2
index 603ea3a053..7c00f78ef1 100644
@@ -108,8 +108,6 @@
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"bootm_size=0x10000000\0" \
 	"fdt_addr_r=0x82000000\0" \
-	"fdt_high=0xffffffff\0" \
-	"initrd_high=0xffffffff\0" \
 	"kernel_addr_r=0x81000000\0" \
 	"ramdisk_addr_r=0x82100000\0" \
 	"scriptaddr=0x82500000\0"
Signature · 1 line
2.17.1
#17 lore raw

PATCH v2 10/13 colibri_imx7: enable relocation of fdt and initrd

Quoted 7 lines

From: Igor Opaniuk <[email protected]>
Remove 'fdt_high' and 'initrd_high' environment variables (set to 0xFFFFFFFF) from default environment which prevents relocation of FDT and initrd. Rely on 'bootm_size' value instead to safely relocate kernel, device tree and initrd.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#18 lore raw

PATCH v2 11/13 apalis_imx6: enable relocation of fdt and initrd

In reply to Igor Opaniuk

From: Igor Opaniuk <[email protected]>

Remove 'fdt_high' and 'initrd_high' environment variables (set to 0xFFFFFFFF) from default environment which prevents relocation of FDT and initrd. Rely on 'bootm_size' value instead to safely relocate kernel, device tree and initrd.

---

 include/configs/apalis_imx6.h | 2 --
 1 file changed, 2 deletions(-)
include/configs/apalis_imx6.h +0 -2
index d2ff7e9534..fb0037444f 100644
@@ -146,8 +146,6 @@
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"bootm_size=0x20000000\0" \
 	"fdt_addr_r=0x12100000\0" \
-	"fdt_high=0xffffffff\0" \
-	"initrd_high=0xffffffff\0" \
 	"kernel_addr_r=0x11000000\0" \
 	"pxefile_addr_r=0x17100000\0" \
 	"ramdisk_addr_r=0x12200000\0" \
Signature · 1 line
2.17.1
#19 lore raw

PATCH v2 11/13 apalis_imx6: enable relocation of fdt and initrd

Quoted 7 lines

From: Igor Opaniuk <[email protected]>
Remove 'fdt_high' and 'initrd_high' environment variables (set to 0xFFFFFFFF) from default environment which prevents relocation of FDT and initrd. Rely on 'bootm_size' value instead to safely relocate kernel, device tree and initrd.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#20 lore raw

PATCH v2 12/13 colibri-imx6ull: enable relocation of fdt and initrd

In reply to Igor Opaniuk

From: Igor Opaniuk <[email protected]>

Remove 'fdt_high' and 'initrd_high' environment variables (set to 0xFFFFFFFF) from default environment which prevents relocation of FDT and initrd. Rely on 'bootm_size' value instead to safely relocate kernel, device tree and initrd.

---

 include/configs/colibri-imx6ull.h | 2 --
 1 file changed, 2 deletions(-)
include/configs/colibri-imx6ull.h +0 -2
index ea5ba6bfce..2a76f576a8 100644
@@ -40,8 +40,6 @@
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"bootm_size=0x10000000\0" \
 	"fdt_addr_r=0x82100000\0" \
-	"fdt_high=0xffffffff\0" \
-	"initrd_high=0xffffffff\0" \
 	"kernel_addr_r=0x81000000\0" \
 	"pxefile_addr_r=0x87100000\0" \
 	"ramdisk_addr_r=0x82200000\0" \
Signature · 1 line
2.17.1
#21 lore raw

PATCH v2 12/13 colibri-imx6ull: enable relocation of fdt and initrd

Quoted 7 lines

From: Igor Opaniuk <[email protected]>
Remove 'fdt_high' and 'initrd_high' environment variables (set to 0xFFFFFFFF) from default environment which prevents relocation of FDT and initrd. Rely on 'bootm_size' value instead to safely relocate kernel, device tree and initrd.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#22 lore raw

PATCH v2 13/13 colibri_imx6: enable relocation of fdt and initrd

In reply to Igor Opaniuk

From: Igor Opaniuk <[email protected]>

Remove 'fdt_high' and 'initrd_high' environment variables (set to 0xFFFFFFFF) from default environment which prevents relocation of FDT and initrd. Rely on 'bootm_size' value instead to safely relocate kernel, device tree and initrd.

---

 include/configs/colibri_imx6.h | 2 --
 1 file changed, 2 deletions(-)
include/configs/colibri_imx6.h +0 -2
index cbc7501bcc..4cdd3c53af 100644
@@ -134,8 +134,6 @@
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"bootm_size=0x10000000\0" \
 	"fdt_addr_r=0x12100000\0" \
-	"fdt_high=0xffffffff\0" \
-	"initrd_high=0xffffffff\0" \
 	"kernel_addr_r=0x11000000\0" \
 	"pxefile_addr_r=0x17100000\0" \
 	"ramdisk_addr_r=0x12200000\0" \
Signature · 1 line
2.17.1
#23 lore raw

PATCH v2 13/13 colibri_imx6: enable relocation of fdt and initrd

Quoted 7 lines

From: Igor Opaniuk <[email protected]>
Remove 'fdt_high' and 'initrd_high' environment variables (set to 0xFFFFFFFF) from default environment which prevents relocation of FDT and initrd. Rely on 'bootm_size' value instead to safely relocate kernel, device tree and initrd.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================