imx: update Boundary Devices boards support
v2 cover imx: update Boundary Devices boards support
Hi,
As suggested by Thomas[1], updating the readme.txt and using genimage.sh.
As an FYI, we unfortunately cannot use the genimage.sh as the args are already used by the imx8-bootloader-prepare.sh.
So we keep using post-image.sh for all nitrogen boards for consistency.
Regards,
Gary
[1] http://lists.busybox.net/pipermail/buildroot/2020-March/278224.html
Gary Bisson (3):
board/boundarydevices/common/post-image.sh: use genimage.sh board/boundarydevices: update readme.txt configs/nitrogen8mm: Add new defconfig
board/boundarydevices/common/post-image.sh | 13 +---- board/boundarydevices/common/readme.txt | 12 ++++- configs/nitrogen8mm_defconfig | 56 ++++++++++++++++++++++ 3 files changed, 67 insertions(+), 14 deletions(-) create mode 100644 configs/nitrogen8mm_defconfig
Signature · 1 line
2.25.1
PATCH v2 1/3 board/boundarydevices/common/post-image.sh: use genimage.sh
- To avoid code duplication and to benefit from support script improvements like empty target dir.
- Note that currently genimage.sh can't be set in defconfig directly for i.MX8 targets as the POST_SCRIPT_ARGS is used by imx8-bootloader-prepare.sh
--- board/boundarydevices/common/post-image.sh | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-)
board/boundarydevices/common/post-image.sh +1 -12
@@ -1,16 +1,5 @@ #!/bin/sh -BOARD_DIR="$(dirname $0)" -GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg" -GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp" - -rm -rf "${GENIMAGE_TMP}" - -genimage \ - --rootpath "${TARGET_DIR}" \ - --tmppath "${GENIMAGE_TMP}" \ - --inputpath "${BINARIES_DIR}" \ - --outputpath "${BINARIES_DIR}" \ - --config "${GENIMAGE_CFG}" +support/scripts/genimage.sh -c $(dirname $0)/genimage.cfg exit $?
Signature · 1 line
2.25.1
PATCH v2 2/3 board/boundarydevices: update readme.txt
In reply to Gary Bisson- update outdated website URL
- add missing Nitrogen8M configuration
- reword procedure to make it clear it works for all storages
--- board/boundarydevices/common/readme.txt | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
board/boundarydevices/common/readme.txt +6 -2
@@ -1,6 +1,6 @@ Buildroot for Boundary Devices platforms: -https://boundarydevices.com/product-category/popular-sbc-and-som-modules/ +https://boundarydevices.com/nitrogen-sbcs-and-soms/ Here is the list of targeted platforms per defconfig:
@@ -19,7 +19,11 @@ Here is the list of targeted platforms per defconfig: - nitrogen7_defconfig - Nitrogen7 -To install, simply copy the image to a uSD card: +- nitrogen8m_defconfig + - Nitrogen8M + - Nitrogen8M_SOM + +To install, simply copy the image to your storage (SD, eMMC, USB): $ sudo dd if=output/images/sdcard.img of=/dev/sdX
Signature · 1 line
2.25.1
PATCH v2 3/3 configs/nitrogen8mm: Add new defconfig
In reply to Gary BissonNXP i.MX8MMini based SBC with 2GB of LPDDR4 and 8GB eMMC.
More details on the platform here:
https://boundarydevices.com/product/nitrogen8m-mini
--- board/boundarydevices/common/readme.txt | 4 ++ configs/nitrogen8mm_defconfig | 56 +++++++++++++++++++++++++ 2 files changed, 60 insertions(+) create mode 100644 configs/nitrogen8mm_defconfig
board/boundarydevices/common/readme.txt +4 -0
@@ -23,6 +23,10 @@ Here is the list of targeted platforms per defconfig: - Nitrogen8M - Nitrogen8M_SOM +- nitrogen8mm_defconfig + - Nitrogen8MMini + - Nitrogen8MMini_SOM + To install, simply copy the image to your storage (SD, eMMC, USB): $ sudo dd if=output/images/sdcard.img of=/dev/sdX
configs/nitrogen8mm_defconfig new file +56 -0
56 lines not on this page · raw message
Signature · 1 line
2.25.1