MIPS: ralink: drop ralink_clk_init for mt7621
Subsystems (3)
PATCH 1/1 MIPS: ralink: drop ralink_clk_init for mt7621
ralink_clk_init is only called in arch/mips/ralink/clk.c which isn't compiled for mt7621. And it doesn't export a proper cpu clock. Drop this unused function.
Signed-off-by Chuanhong Guo <[email protected]>
--- arch/mips/ralink/mt7621.c | 43 --------------------------------------- 1 file changed, 43 deletions(-)
arch/mips/ralink/mt7621.c +0 -43
@@ -20,11 +20,6 @@#include "common.h" -#define SYSC_REG_SYSCFG 0x10 -#define SYSC_REG_CPLL_CLKCFG0 0x2c -#define SYSC_REG_CUR_CLK_STS 0x44 -#define CPU_CLK_SEL (BIT(30) | BIT(31)) -#define MT7621_GPIO_MODE_UART1 1#define MT7621_GPIO_MODE_I2C 2#define MT7621_GPIO_MODE_UART3_MASK 0x3
@@ -115,44 +110,6 @@ phys_addr_t mips_cpc_default_phys_base(void)panic ("Cannot detect cpc address" ); } -void __init ralink_clk_init (void ) -{ -int cpu_fdiv =0 ; -int cpu_ffrac =0 ; -int fbdiv =0 ; -u32 clk_sts, syscfg; -u8 clk_sel =0 , xtal_mode; -u32 cpu_clk; - -if ((rt_sysc_r32 (SYSC_REG_CPLL_CLKCFG0 ) &CPU_CLK_SEL ) !=0 ) - clk_sel =1 ; - -switch (clk_sel) { -case 0 : - clk_sts =rt_sysc_r32 (SYSC_REG_CUR_CLK_STS ); - cpu_fdiv = ((clk_sts >>8 ) &0x1F ); - cpu_ffrac = (clk_sts &0x1F ); - cpu_clk = (500 * cpu_ffrac / cpu_fdiv) *1000 *1000 ; -break ; - -case 1 : - fbdiv = ((rt_sysc_r32 (0x648 ) >>4 ) &0x7F ) +1 ; - syscfg =rt_sysc_r32 (SYSC_REG_SYSCFG ); - xtal_mode = (syscfg >>6 ) &0x7 ; -if (xtal_mode >=6 ) { -/* 25Mhz Xtal */ - cpu_clk =25 * fbdiv *1000 *1000 ; - }else if (xtal_mode >=3 ) { -/* 40Mhz Xtal */ - cpu_clk =40 * fbdiv *1000 *1000 ; - }else { -/* 20Mhz Xtal */ - cpu_clk =20 * fbdiv *1000 *1000 ; - } -break ; - } -} -void __init ralink_of_remap (void ) { rt_sysc_membase =plat_of_remap_node ("mtk,mt7621-sysc" );
Signature · 1 line
2.25.1
Quoted 8 lines · Chuanhong Guo
ralink_clk_initis only called inarch/mips/ralink/clk.cwhich isn't compiled for mt7621. And it doesn't export a proper cpu clock. Drop this unused function.Signed-off-by Chuanhong Guo <[email protected]>--- arch/mips/ralink/mt7621.c | 43 --------------------------------------- 1 file changed, 43 deletions(-)
applied to mips-next.
Thomas.
Signature · 2 lines
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a good idea. [ RFC1925, 2.3 ]