dts: ARM: e60k02: add interrupt for PMIC
PATCH 1/1 dts: ARM: e60k02: add interrupt for PMIC
Since the PMIC driver now has IRQ handling, add the GPIO to listen to things like RTC alarm or ADC conversion completion.
---
The corresponding property is added to the bindings documentation in
https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git/log/?h=ib-mfd-iio-rtc-5.7
arch/arm/boot/dts/e60k02.dtsi | 2 ++ 1 file changed, 2 insertions(+)
arch/arm/boot/dts/e60k02.dtsi +2 -0
@@ -117,6 +117,8 @@ ricoh619: pmic@32 { compatible = "ricoh,rc5t619"; reg = <0x32>; + interrupt-parent = <&gpio5>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; system-power-controller; regulators {
Signature · 1 line
2.20.1
ping...
Regards,
Andreas
Quoted 23 lines · On Sun, 29 Mar 2020 12:42:50 +0200 Andreas Kemnade <[email protected]> wrote:
Since the PMIC driver now has IRQ handling, add the GPIO to listen to things like RTC alarm or ADC conversion completion.
Signed-off-by Andreas Kemnade <[email protected]>---
The corresponding property is added to the bindings documentation in
https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git/log/?h=ib-mfd-iio-rtc-5.7arch/arm/boot/dts/e60k02.dtsi | 2 ++ 1 file changed, 2 insertions(+)arch/arm/boot/dts/e60k02.dtsi +2
-0@@ -117,6 +117,8 @@ ricoh619: pmic@32 { compatible = "ricoh,rc5t619"; reg = <0x32>; + interrupt-parent = <&gpio5>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; system-power-controller; regulators {
Quoted 4 lines · Andreas Kemnade
Since the PMIC driver now has IRQ handling, add the GPIO to listen to things like RTC alarm or ADC conversion completion.
Signed-off-by Andreas Kemnade <[email protected]>
Subject should be prefixed like 'ARM: dts: ...'
I fixed it up and applied the patch.
Shawn