Skip to contentSkip to conversation

meson: enable USB Gadget support fot GXL/GXM SoCs

PATCH New Neil Armstrong 2 participants 14 messages Mar 30, 2020 – Apr 17, 2020

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

cover meson: enable USB Gadget support fot GXL/GXM SoCs

Thit patchset adds support for OTG Gadget mode on the GXL/GXM SoCs.

It adds a new API generic_phy_get_by_node() to get the PHY by it's node.

It enabled Gadget and USB Mass Storage for libretech-cc, libretech-ac, khadas-vim, khadas-vim2, libretech-s905d-pc and libretech-s912-pc boards.

Neil Armstrong (10):
generic-phy: add generic_phy_get_by_node()
phy: meson-gxl-usb: add set_mode call to force switch to peripheral
mode
arm: meson-gx: add board_usb_init()/cleanup() for USB gadget
arm: dts: meson-gxl: Add USB Gadget nodes for U-Boot
configs: libretech-cc: Enable USB gadget with Mass Storage function
configs: libretech-ac: Enable USB gadget with Mass Storage function
configs: khadas-vim2: Enable USB gadget with Mass Storage function
configs: khadas-vim: Enable USB gadget with Mass Storage function
configs: libretech-s905d-pc: Enable USB gadget with Mass Storage
function
configs: libretech-s912-pc: Enable USB gadget with Mass Storage
function

 .../meson-gxl-s905x-khadas-vim-u-boot.dtsi    |   2 +-
 .../meson-gxl-s905x-libretech-cc-u-boot.dtsi  |   6 +-
 arch/arm/dts/meson-gxl-s905x-p212-u-boot.dtsi |   2 +-
 arch/arm/dts/meson-gxl-u-boot.dtsi            |  23 ++++
 arch/arm/include/asm/arch-meson/usb-gx.h      |  16 +++
 arch/arm/mach-meson/board-gx.c                | 118 ++++++++++++++++++
 configs/khadas-vim2_defconfig                 |   7 ++
 configs/khadas-vim_defconfig                  |   7 ++
 configs/libretech-ac_defconfig                |   7 ++
 configs/libretech-cc_defconfig                |   7 ++
 configs/libretech-s905d-pc_defconfig          |   7 ++
 configs/libretech-s912-pc_defconfig           |   7 ++
 drivers/phy/meson-gxl-usb2.c                  |  30 ++++-
 drivers/phy/meson-gxl-usb3.c                  |  44 +++++--
 drivers/phy/phy-uclass.c                      |  17 ++-
 include/generic-phy.h                         |  27 ++++
 16 files changed, 301 insertions(+), 26 deletions(-)
 create mode 100644 arch/arm/dts/meson-gxl-u-boot.dtsi
 create mode 100644 arch/arm/include/asm/arch-meson/usb-gx.h
Signature · 1 line
2.22.0
#1 lore raw

PATCH 1/10 generic-phy: add generic_phy_get_by_node()

Add generic_phy_get_by_node() to get a PHY phandle from a node instead of a udevice.

---
 drivers/phy/phy-uclass.c | 17 ++++++++++++-----
 include/generic-phy.h    | 27 +++++++++++++++++++++++++++
 2 files changed, 39 insertions(+), 5 deletions(-)
drivers/phy/phy-uclass.c +11 -5
index e201a90c8c..de2c3d2b8e 100644
@@ -31,20 +31,20 @@ static int generic_phy_xlate_offs_flags(struct phy *phy,
 	return 0;
 }
 
-int generic_phy_get_by_index(struct udevice *dev, int index,
-			     struct phy *phy)
+int generic_phy_get_by_node(ofnode node, int index, struct phy *phy)
 {
 	struct ofnode_phandle_args args;
 	struct phy_ops *ops;
 	struct udevice *phydev;
 	int i, ret;
 
-	debug("%s(dev=%p, index=%d, phy=%p)\n", __func__, dev, index, phy);
+	debug("%s(node=%s, index=%d, phy=%p)\n",
+	      __func__, ofnode_get_name(node), index, phy);
 
 	assert(phy);
 	phy->dev = NULL;
-	ret = dev_read_phandle_with_args(dev, "phys", "#phy-cells", 0, index,
-					 &args);
+	ret = ofnode_parse_phandle_with_args(node, "phys", "#phy-cells", 0,
+					     index, &args);
 	if (ret) {
 		debug("%s: dev_read_phandle_with_args failed: err=%d\n",
 		      __func__, ret);
@@ -88,6 +88,12 @@ int generic_phy_get_by_index(struct udevice *dev, int index,
 
 err:
 	return ret;
+}
+
+int generic_phy_get_by_index(struct udevice *dev, int index,
+			     struct phy *phy)
+{
+	return generic_phy_get_by_node(dev_ofnode(dev), index, phy);
 }
 
 int generic_phy_get_by_name(struct udevice *dev, const char *phy_name,
include/generic-phy.h +27 -0
index 95caf58341..5873ffb2e0 100644
@@ -193,6 +193,33 @@ int generic_phy_power_off(struct phy *phy);
 int generic_phy_get_by_index(struct udevice *user, int index,
 			     struct phy *phy);
 
+/**
+ * generic_phy_get_by_node() - Get a PHY device by integer index on ofnode
+ *
+ * @node:	the device node
+ * @index:	The index in the list of available PHYs
+ * @phy:	A pointer to the PHY port
+ *
+ * This looks up a PHY device for a client device based on its ofnode and on
+ * its position in the list of the possible PHYs.
+ *
+ * example:
+ * usb1: usb_otg_ss at xxx {
+ *       compatible = "xxx";
+ *       reg = <xxx>;
+ *   .
+ *   .
+ *   phys = <&usb2_phy>, <&usb3_phy>;
+ *   .
+ *   .
+ * };
+ * the USB2 phy can be accessed by passing index '0' and the USB3 phy can
+ * be accessed by passing index '1'
+ *
+ * @return 0 if OK, or a negative error code
+ */
+int generic_phy_get_by_node(ofnode node, int index, struct phy *phy);
+
 /**
  * generic_phy_get_by_name() - Get a PHY device by its name.
  *
Signature · 1 line
2.22.0
#2 lore raw

PATCH 1/10 generic-phy: add generic_phy_get_by_node()

Tom, Marek,

Quoted 8 lines · Neil Armstrong

Add generic_phy_get_by_node() to get a PHY phandle from a node instead of a udevice.

---
 drivers/phy/phy-uclass.c | 17 ++++++++++++-----
 include/generic-phy.h    | 27 +++++++++++++++++++++++++++
 2 files changed, 39 insertions(+), 5 deletions(-)

Are you ok with this change ?

Neil

Quoted 83 lines
drivers/phy/phy-uclass.c +11 -5
index e201a90c8c..de2c3d2b8e 100644
@@ -31,20 +31,20 @@ static int generic_phy_xlate_offs_flags(struct phy *phy,
 	return 0;
 }
 
-int generic_phy_get_by_index(struct udevice *dev, int index,
-			     struct phy *phy)
+int generic_phy_get_by_node(ofnode node, int index, struct phy *phy)
 {
 	struct ofnode_phandle_args args;
 	struct phy_ops *ops;
 	struct udevice *phydev;
 	int i, ret;
 
-	debug("%s(dev=%p, index=%d, phy=%p)\n", __func__, dev, index, phy);
+	debug("%s(node=%s, index=%d, phy=%p)\n",
+	      __func__, ofnode_get_name(node), index, phy);
 
 	assert(phy);
 	phy->dev = NULL;
-	ret = dev_read_phandle_with_args(dev, "phys", "#phy-cells", 0, index,
-					 &args);
+	ret = ofnode_parse_phandle_with_args(node, "phys", "#phy-cells", 0,
+					     index, &args);
 	if (ret) {
 		debug("%s: dev_read_phandle_with_args failed: err=%d\n",
 		      __func__, ret);
@@ -88,6 +88,12 @@ int generic_phy_get_by_index(struct udevice *dev, int index,
 
 err:
 	return ret;
+}
+
+int generic_phy_get_by_index(struct udevice *dev, int index,
+			     struct phy *phy)
+{
+	return generic_phy_get_by_node(dev_ofnode(dev), index, phy);
 }
 
 int generic_phy_get_by_name(struct udevice *dev, const char *phy_name,
include/generic-phy.h +27 -0
index 95caf58341..5873ffb2e0 100644
@@ -193,6 +193,33 @@ int generic_phy_power_off(struct phy *phy);
 int generic_phy_get_by_index(struct udevice *user, int index,
 			     struct phy *phy);
 
+/**
+ * generic_phy_get_by_node() - Get a PHY device by integer index on ofnode
+ *
+ * @node:	the device node
+ * @index:	The index in the list of available PHYs
+ * @phy:	A pointer to the PHY port
+ *
+ * This looks up a PHY device for a client device based on its ofnode and on
+ * its position in the list of the possible PHYs.
+ *
+ * example:
+ * usb1: usb_otg_ss at xxx {
+ *       compatible = "xxx";
+ *       reg = <xxx>;
+ *   .
+ *   .
+ *   phys = <&usb2_phy>, <&usb3_phy>;
+ *   .
+ *   .
+ * };
+ * the USB2 phy can be accessed by passing index '0' and the USB3 phy can
+ * be accessed by passing index '1'
+ *
+ * @return 0 if OK, or a negative error code
+ */
+int generic_phy_get_by_node(ofnode node, int index, struct phy *phy);
+
 /**
  * generic_phy_get_by_name() - Get a PHY device by its name.
  *
#3 lore raw

PATCH 1/10 generic-phy: add generic_phy_get_by_node()

Quoted 6 lines · Neil Armstrong

Tom, Marek,

Quoted 3 lines · Neil Armstrong

Add generic_phy_get_by_node() to get a PHY phandle from a node instead of a udevice.

Quoted 8 lines
Quoted 5 lines
---
 drivers/phy/phy-uclass.c | 17 ++++++++++++-----
 include/generic-phy.h    | 27 +++++++++++++++++++++++++++
 2 files changed, 39 insertions(+), 5 deletions(-)

Are you ok with this change ?

Quoted 87 lines

Neil

Quoted 83 lines
drivers/phy/phy-uclass.c +11 -5
index e201a90c8c..de2c3d2b8e 100644
@@ -31,20 +31,20 @@ static int generic_phy_xlate_offs_flags(struct phy *phy,
 	return 0;
 }
 
-int generic_phy_get_by_index(struct udevice *dev, int index,
-			     struct phy *phy)
+int generic_phy_get_by_node(ofnode node, int index, struct phy *phy)
 {
 	struct ofnode_phandle_args args;
 	struct phy_ops *ops;
 	struct udevice *phydev;
 	int i, ret;
 
-	debug("%s(dev=%p, index=%d, phy=%p)\n", __func__, dev, index, phy);
+	debug("%s(node=%s, index=%d, phy=%p)\n",
+	      __func__, ofnode_get_name(node), index, phy);
 
 	assert(phy);
 	phy->dev = NULL;
-	ret = dev_read_phandle_with_args(dev, "phys", "#phy-cells", 0, index,
-					 &args);
+	ret = ofnode_parse_phandle_with_args(node, "phys", "#phy-cells", 0,
+					     index, &args);
 	if (ret) {
 		debug("%s: dev_read_phandle_with_args failed: err=%d\n",
 		      __func__, ret);
@@ -88,6 +88,12 @@ int generic_phy_get_by_index(struct udevice *dev, int index,
 
 err:
 	return ret;
+}
+
+int generic_phy_get_by_index(struct udevice *dev, int index,
+			     struct phy *phy)
+{
+	return generic_phy_get_by_node(dev_ofnode(dev), index, phy);
 }
 
 int generic_phy_get_by_name(struct udevice *dev, const char *phy_name,
include/generic-phy.h +27 -0
index 95caf58341..5873ffb2e0 100644
@@ -193,6 +193,33 @@ int generic_phy_power_off(struct phy *phy);
 int generic_phy_get_by_index(struct udevice *user, int index,
 			     struct phy *phy);
 
+/**
+ * generic_phy_get_by_node() - Get a PHY device by integer index on ofnode
+ *
+ * @node:	the device node
+ * @index:	The index in the list of available PHYs
+ * @phy:	A pointer to the PHY port
+ *
+ * This looks up a PHY device for a client device based on its ofnode and on
+ * its position in the list of the possible PHYs.
+ *
+ * example:
+ * usb1: usb_otg_ss at xxx {
+ *       compatible = "xxx";
+ *       reg = <xxx>;
+ *   .
+ *   .
+ *   phys = <&usb2_phy>, <&usb3_phy>;
+ *   .
+ *   .
+ * };
+ * the USB2 phy can be accessed by passing index '0' and the USB3 phy can
+ * be accessed by passing index '1'
+ *
+ * @return 0 if OK, or a negative error code
+ */
+int generic_phy_get_by_node(ofnode node, int index, struct phy *phy);
+
 /**
  * generic_phy_get_by_name() - Get a PHY device by its name.
  *
Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200416/ada5ed4c/attachment.sig>
#4 lore raw

PATCH 2/10 phy: meson-gxl-usb: add set_mode call to force switch to peripheral mode

In reply to Neil Armstrong

Add set_mode function in the Amlogic GXL PHYs that will be called by the arch code to switch PHYs from/to gadget mode.

---
 arch/arm/include/asm/arch-meson/usb-gx.h | 16 +++++++++
 drivers/phy/meson-gxl-usb2.c             | 30 ++++++++++++----
 drivers/phy/meson-gxl-usb3.c             | 44 +++++++++++++++++-------
 3 files changed, 72 insertions(+), 18 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-meson/usb-gx.h
arch/arm/include/asm/arch-meson/usb-gx.h new file +16 -0
new file mode 100644
index 0000000000..aeb8e0c673
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 BayLibre SAS
+ * Author: Neil Armstrong <[email protected]>
+ */
+#ifndef _ARCH_MESON_USB_GX_H_
+#define _ARCH_MESON_USB_GX_H_
+
+#include <generic-phy.h>
+#include <linux/usb/otg.h>
+
+/* TOFIX add set_mode to struct phy_ops */
+void phy_meson_gxl_usb2_set_mode(struct phy *phy, enum usb_dr_mode mode);
+void phy_meson_gxl_usb3_set_mode(struct phy *phy, enum usb_dr_mode mode);
+
+#endif
drivers/phy/meson-gxl-usb2.c +24 -6
index c98d12b627..b4f4c3c76b 100644
@@ -17,6 +17,9 @@
 #include <regmap.h>
 #include <power/regulator.h>
 #include <clk.h>
+#include <linux/usb/otg.h>
+
+#include <asm/arch/usb-gx.h>
 
 #include <linux/bitops.h>
 #include <linux/compat.h>
@@ -121,15 +124,30 @@ static void phy_meson_gxl_usb2_reset(struct phy_meson_gxl_usb2_priv *priv)
 	udelay(RESET_COMPLETE_TIME);
 }
 
-static void
-phy_meson_gxl_usb2_set_host_mode(struct phy_meson_gxl_usb2_priv *priv)
+void phy_meson_gxl_usb2_set_mode(struct phy *phy, enum usb_dr_mode mode)
 {
+	struct udevice *dev = phy->dev;
+	struct phy_meson_gxl_usb2_priv *priv = dev_get_priv(dev);
 	uint val;
 
 	regmap_read(priv->regmap, U2P_R0, &val);
-	val |= U2P_R0_DM_PULLDOWN;
-	val |= U2P_R0_DP_PULLDOWN;
-	val &= ~U2P_R0_ID_PULLUP;
+
+	switch (mode) {
+	case USB_DR_MODE_UNKNOWN:
+	case USB_DR_MODE_HOST:
+	case USB_DR_MODE_OTG:
+		val |= U2P_R0_DM_PULLDOWN;
+		val |= U2P_R0_DP_PULLDOWN;
+		val &= ~U2P_R0_ID_PULLUP;
+		break;
+
+	case USB_DR_MODE_PERIPHERAL:
+		val &= ~U2P_R0_DM_PULLDOWN;
+		val &= ~U2P_R0_DP_PULLDOWN;
+		val |= U2P_R0_ID_PULLUP;
+		break;
+	}
+
 	regmap_write(priv->regmap, U2P_R0, val);
 
 	phy_meson_gxl_usb2_reset(priv);
@@ -146,7 +164,7 @@ static int phy_meson_gxl_usb2_power_on(struct phy *phy)
 	val &= ~U2P_R0_POWER_ON_RESET;
 	regmap_write(priv->regmap, U2P_R0, val);
 
-	phy_meson_gxl_usb2_set_host_mode(priv);
+	phy_meson_gxl_usb2_set_mode(phy, USB_DR_MODE_HOST);
 
 #if CONFIG_IS_ENABLED(DM_REGULATOR)
 	if (priv->phy_supply) {
drivers/phy/meson-gxl-usb3.c +32 -12

65 lines not on this page · raw message

Signature · 1 line
2.22.0
#5 lore raw

PATCH 3/10 arm: meson-gx: add board_usb_init()/cleanup() for USB gadget

In reply to Neil Armstrong

Add arch code to initialize USB Gadget mode using the DWC2 controller, and using the previously added set_mode() phy functions.

---
 arch/arm/mach-meson/board-gx.c | 118 +++++++++++++++++++++++++++++++++
 1 file changed, 118 insertions(+)
arch/arm/mach-meson/board-gx.c +118 -0
index 191fd49005..1a7e102c38 100644
@@ -14,6 +14,11 @@
 #include <asm/io.h>
 #include <asm/armv8/mmu.h>
 #include <linux/sizes.h>
+#include <usb.h>
+#include <linux/usb/otg.h>
+#include <asm/arch/usb-gx.h>
+#include <usb/dwc2_udc.h>
+#include <clk.h>
 #include <phy.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -149,3 +154,116 @@ void meson_eth_init(phy_interface_t mode, unsigned int flags)
 	/* Enable power gate */
 	clrbits_le32(GX_MEM_PD_REG_0, GX_MEM_PD_REG_0_ETH_MASK);
 }
+
+#if CONFIG_IS_ENABLED(USB_XHCI_DWC3_OF_SIMPLE) && \
+	CONFIG_IS_ENABLED(USB_GADGET_DWC2_OTG)
+static struct dwc2_plat_otg_data meson_gx_dwc2_data;
+static struct phy usb_phys[2];
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+	struct ofnode_phandle_args args;
+	struct udevice *clk_dev;
+	ofnode dwc2_node;
+	struct clk clk;
+	int ret, i;
+	u32 val;
+
+	/* find the dwc2 node */
+	dwc2_node = ofnode_by_compatible(ofnode_null(), "snps,dwc2");
+	if (!ofnode_valid(dwc2_node)) {
+		debug("Not found dwc2 node\n");
+		return -ENODEV;
+	}
+
+	if (!ofnode_is_available(dwc2_node)) {
+		debug("dwc2 is disabled in the device tree\n");
+		return -ENODEV;
+	}
+
+	/* get the PHYs */
+	for (i = 0; i < 2; i++) {
+		ret = generic_phy_get_by_node(dwc2_node, i, &usb_phys[i]);
+		if (ret && ret != -ENOENT) {
+			pr_err("Failed to get USB PHY%d for %s\n",
+			       i, ofnode_get_name(dwc2_node));
+			return ret;
+		}
+	}
+
+	for (i = 0; i < 2; i++) {
+		ret = generic_phy_init(&usb_phys[i]);
+		if (ret) {
+			pr_err("Can't init USB PHY%d for %s\n",
+			       i, ofnode_get_name(dwc2_node));
+			return ret;
+		}
+	}
+
+	for (i = 0; i < 2; i++) {
+		ret = generic_phy_power_on(&usb_phys[i]);
+		if (ret) {
+			pr_err("Can't power USB PHY%d for %s\n",
+			       i, ofnode_get_name(dwc2_node));
+			return ret;
+		}
+	}
+
+	phy_meson_gxl_usb3_set_mode(&usb_phys[0], USB_DR_MODE_PERIPHERAL);
+	phy_meson_gxl_usb2_set_mode(&usb_phys[1], USB_DR_MODE_PERIPHERAL);
+
+	meson_gx_dwc2_data.regs_otg = ofnode_get_addr(dwc2_node);
+	if (meson_gx_dwc2_data.regs_otg == FDT_ADDR_T_NONE) {
+		debug("usbotg: can't get base address\n");
+		return -ENODATA;
+	}
+
+	/* Enable clock */
+	ret = ofnode_parse_phandle_with_args(dwc2_node, "clocks",
+					     "#clock-cells", 0, 0, &args);
+	if (ret) {
+		debug("usbotg has no clocks defined in the device tree\n");
+		return ret;
+	}
+
+	ret = uclass_get_device_by_ofnode(UCLASS_CLK, args.node, &clk_dev);
+	if (ret)
+		return ret;
+
+	if (args.args_count != 1) {
+		debug("Can't find clock ID in the device tree\n");
+		return -ENODATA;
+	}
+
+	clk.dev = clk_dev;
+	clk.id = args.args[0];
+
+	ret = clk_enable(&clk);
+	if (ret) {
+		debug("Failed to enable usbotg clock\n");
+		return ret;
+	}
+
+	ofnode_read_u32(dwc2_node, "g-rx-fifo-size", &val);
+	meson_gx_dwc2_data.rx_fifo_sz = val;
+	ofnode_read_u32(dwc2_node, "g-np-tx-fifo-size", &val);
+	meson_gx_dwc2_data.np_tx_fifo_sz = val;
+	ofnode_read_u32(dwc2_node, "g-tx-fifo-size", &val);
+	meson_gx_dwc2_data.tx_fifo_sz = val;
+
+	return dwc2_udc_probe(&meson_gx_dwc2_data);
+}
+
+int board_usb_cleanup(int index, enum usb_init_type init)
+{
+	int i;
+
+	phy_meson_gxl_usb3_set_mode(&usb_phys[0], USB_DR_MODE_HOST);
+	phy_meson_gxl_usb3_set_mode(&usb_phys[1], USB_DR_MODE_HOST);
+
+	for (i = 0; i < 2; i++)
+		usb_phys[i].dev = NULL;
+
+	return 0;
+}
+#endif
Signature · 1 line
2.22.0
#6 lore raw

PATCH 4/10 arm: dts: meson-gxl: Add USB Gadget nodes for U-Boot

In reply to Neil Armstrong

Add the USB DWC2 node to u-boot specific dtsi files since Gadget support is not (yet) available in upstream Linux yet.

---
 .../meson-gxl-s905x-khadas-vim-u-boot.dtsi    |  2 +-
 .../meson-gxl-s905x-libretech-cc-u-boot.dtsi  |  6 ++++-
 arch/arm/dts/meson-gxl-s905x-p212-u-boot.dtsi |  2 +-
 arch/arm/dts/meson-gxl-u-boot.dtsi            | 23 +++++++++++++++++++
 4 files changed, 30 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/dts/meson-gxl-u-boot.dtsi
arch/arm/dts/meson-gxl-s905x-khadas-vim-u-boot.dtsi +1 -1
index c35158d7e9..39270ea71c 100644
@@ -4,4 +4,4 @@
  * Author: Neil Armstrong <[email protected]>
  */
 
-#include "meson-gx-u-boot.dtsi"
+#include "meson-gxl-u-boot.dtsi"
arch/arm/dts/meson-gxl-s905x-libretech-cc-u-boot.dtsi +5 -1
index c35158d7e9..474a3e1604 100644
@@ -4,4 +4,8 @@
  * Author: Neil Armstrong <[email protected]>
  */
 
-#include "meson-gx-u-boot.dtsi"
+#include "meson-gxl-u-boot.dtsi"
+
+&dwc2 {
+	status = "okay";
+};
arch/arm/dts/meson-gxl-s905x-p212-u-boot.dtsi +1 -1
index c35158d7e9..39270ea71c 100644
@@ -4,4 +4,4 @@
  * Author: Neil Armstrong <[email protected]>
  */
 
-#include "meson-gx-u-boot.dtsi"
+#include "meson-gxl-u-boot.dtsi"
arch/arm/dts/meson-gxl-u-boot.dtsi new file +23 -0
new file mode 100644
index 0000000000..9e88afd30e
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Neil Armstrong <[email protected]>
+ */
+
+#include "meson-gx-u-boot.dtsi"
+
+&usb0 {
+	dwc2: usb at c9100000 {
+		compatible = "snps,dwc2";
+		reg = <0x0 0xc9100000 0x0 0x40000>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+		clock-names = "ddr";
+		phys = <&usb3_phy>, <&usb2_phy1>;
+		dr_mode = "peripheral";
+		g-rx-fifo-size = <192>;
+		g-np-tx-fifo-size = <128>;
+		g-tx-fifo-size = <128 128 16 16 16>;
+		status = "disabled";
+	};
+};
Signature · 1 line
2.22.0
#7 lore raw

PATCH 5/10 configs: libretech-cc: Enable USB gadget with Mass Storage function

In reply to Neil Armstrong

Enable configs to support USB gadget and Mass Storage

---
 configs/libretech-cc_defconfig | 7 +++++++
 1 file changed, 7 insertions(+)
configs/libretech-cc_defconfig +7 -0
index 7c257b33b3..2c512ebc1e 100644
@@ -19,6 +19,7 @@ CONFIG_CMD_GPIO=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_REGULATOR=y
 CONFIG_OF_CONTROL=y
@@ -51,6 +52,12 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
 CONFIG_USB_DWC3=y
+# CONFIG_USB_DWC3_GADGET is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e
+CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_DM_VIDEO=y
 # CONFIG_VIDEO_BPP8 is not set
 # CONFIG_VIDEO_BPP16 is not set
Signature · 1 line
2.22.0
#8 lore raw

PATCH 6/10 configs: libretech-ac: Enable USB gadget with Mass Storage function

In reply to Neil Armstrong

Enable configs to support USB gadget and Mass Storage

---
 configs/libretech-ac_defconfig | 7 +++++++
 1 file changed, 7 insertions(+)
configs/libretech-ac_defconfig +7 -0
index 09b87c54d5..7e486757a2 100644
@@ -27,6 +27,7 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_SF_TEST=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_REGULATOR=y
 CONFIG_OF_CONTROL=y
@@ -69,6 +70,12 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_KEYBOARD=y
+# CONFIG_USB_DWC3_GADGET is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e
+CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_DM_VIDEO=y
 # CONFIG_VIDEO_BPP8 is not set
 # CONFIG_VIDEO_BPP16 is not set
Signature · 1 line
2.22.0
#9 lore raw

PATCH 7/10 configs: khadas-vim2: Enable USB gadget with Mass Storage function

In reply to Neil Armstrong

Enable configs to support USB gadget and Mass Storage

---
 configs/khadas-vim2_defconfig | 7 +++++++
 1 file changed, 7 insertions(+)
configs/khadas-vim2_defconfig +7 -0
index 9cb377e55e..a533566410 100644
@@ -20,6 +20,7 @@ CONFIG_CMD_GPIO=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_REGULATOR=y
 CONFIG_OF_CONTROL=y
@@ -49,4 +50,10 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
 CONFIG_USB_DWC3=y
+# CONFIG_USB_DWC3_GADGET is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e
+CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_OF_LIBFDT_OVERLAY=y
Signature · 1 line
2.22.0
#10 lore raw

PATCH 8/10 configs: khadas-vim: Enable USB gadget with Mass Storage function

In reply to Neil Armstrong

Enable configs to support USB gadget and Mass Storage

---
 configs/khadas-vim_defconfig | 7 +++++++
 1 file changed, 7 insertions(+)
configs/khadas-vim_defconfig +7 -0
index e18a5e62bb..8a0af5cebb 100644
@@ -20,6 +20,7 @@ CONFIG_CMD_GPIO=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_REGULATOR=y
 CONFIG_OF_CONTROL=y
@@ -50,4 +51,10 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
 CONFIG_USB_DWC3=y
+# CONFIG_USB_DWC3_GADGET is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e
+CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_OF_LIBFDT_OVERLAY=y
Signature · 1 line
2.22.0
#11 lore raw

PATCH 9/10 configs: libretech-s905d-pc: Enable USB gadget with Mass Storage function

In reply to Neil Armstrong

Enable configs to support USB gadget and Mass Storage

---
 configs/libretech-s905d-pc_defconfig | 7 +++++++
 1 file changed, 7 insertions(+)
configs/libretech-s905d-pc_defconfig +7 -0
index 7e0c95872a..531d519a7c 100644
@@ -26,6 +26,7 @@ CONFIG_CMD_SF=y
 CONFIG_CMD_SF_TEST=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_REGULATOR=y
 CONFIG_OF_CONTROL=y
@@ -65,6 +66,12 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
 CONFIG_USB_DWC3=y
+# CONFIG_USB_DWC3_GADGET is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e
+CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_USB_KEYBOARD=y
 CONFIG_DM_VIDEO=y
 CONFIG_SYS_WHITE_ON_BLACK=y
Signature · 1 line
2.22.0
#12 lore raw

PATCH 10/10 configs: libretech-s912-pc: Enable USB gadget with Mass Storage function

In reply to Neil Armstrong

Enable configs to support USB gadget and Mass Storage

---
 configs/libretech-s912-pc_defconfig | 7 +++++++
 1 file changed, 7 insertions(+)
configs/libretech-s912-pc_defconfig +7 -0
index 5f4ee329e2..595ec21da7 100644
@@ -26,6 +26,7 @@ CONFIG_CMD_SF=y
 CONFIG_CMD_SF_TEST=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_REGULATOR=y
 CONFIG_OF_CONTROL=y
@@ -65,6 +66,12 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
 CONFIG_USB_DWC3=y
+# CONFIG_USB_DWC3_GADGET is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e
+CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_USB_KEYBOARD=y
 CONFIG_DM_VIDEO=y
 CONFIG_SYS_WHITE_ON_BLACK=y
Signature · 1 line
2.22.0
#13 lore raw

cover meson: enable USB Gadget support fot GXL/GXM SoCs

In reply to Neil Armstrong
Quoted 33 lines · Neil Armstrong

Thit patchset adds support for OTG Gadget mode on the GXL/GXM SoCs.

It adds a new API generic_phy_get_by_node() to get the PHY by it's node.

It enabled Gadget and USB Mass Storage for libretech-cc, libretech-ac, khadas-vim, khadas-vim2, libretech-s905d-pc and libretech-s912-pc boards.

Neil Armstrong (10):
generic-phy: add generic_phy_get_by_node()
phy: meson-gxl-usb: add set_mode call to force switch to peripheral
mode
arm: meson-gx: add board_usb_init()/cleanup() for USB gadget
arm: dts: meson-gxl: Add USB Gadget nodes for U-Boot
configs: libretech-cc: Enable USB gadget with Mass Storage function
configs: libretech-ac: Enable USB gadget with Mass Storage function
configs: khadas-vim2: Enable USB gadget with Mass Storage function
configs: khadas-vim: Enable USB gadget with Mass Storage function
configs: libretech-s905d-pc: Enable USB gadget with Mass Storage
function
configs: libretech-s912-pc: Enable USB gadget with Mass Storage
function

 .../meson-gxl-s905x-khadas-vim-u-boot.dtsi    |   2 +-
 .../meson-gxl-s905x-libretech-cc-u-boot.dtsi  |   6 +-
 arch/arm/dts/meson-gxl-s905x-p212-u-boot.dtsi |   2 +-
 arch/arm/dts/meson-gxl-u-boot.dtsi            |  23 ++++
 arch/arm/include/asm/arch-meson/usb-gx.h      |  16 +++
 arch/arm/mach-meson/board-gx.c                | 118 ++++++++++++++++++
 configs/khadas-vim2_defconfig                 |   7 ++
 configs/khadas-vim_defconfig                  |   7 ++
 configs/libretech-ac_defconfig                |   7 ++
 configs/libretech-cc_defconfig                |   7 ++
 configs/libretech-s905d-pc_defconfig          |   7 ++
Quoted 9 lines
 configs/libretech-s912-pc_defconfig           |   7 ++
 drivers/phy/meson-gxl-usb2.c                  |  30 ++++-
 drivers/phy/meson-gxl-usb3.c                  |  44 +++++--
 drivers/phy/phy-uclass.c                      |  17 ++-
 include/generic-phy.h                         |  27 ++++
 16 files changed, 301 insertions(+), 26 deletions(-)
 create mode 100644 arch/arm/dts/meson-gxl-u-boot.dtsi
 create mode 100644 arch/arm/include/asm/arch-meson/usb-gx.h

Applied to u-boot-amlogic with tom's review tag on patch 1