Skip to contentSkip to conversation

docs: Fix our url schemes to use https

PATCH In review Ian Jackson 3 participants 8 messages Mar 30, 2020

lore
Share & tools
lore
#0 lore raw

cover docs: Fix our url schemes to use https

Obviously we should be publishing https: URLs instead of http: ones where possible. I have not changed URLs referring to other projects at this stage because that would have involved checking whether
https:// works for them.

Ian Jackson (3):
docs etc.: https: Fix references to wiki.xen[project.org docs etc.: https: Fix references to other Xen pages docs/README: Fix a broken url

 README                               | 24 ++++++++++++------------
 SUPPORT.md                           |  2 +-
 config/Paths.mk.in                   |  2 +-
 configure                            |  6 +++---
 configure.ac                         |  2 +-
 docs/README.colo                     |  2 +-
 docs/README.remus                    |  2 +-
 docs/configure                       |  6 +++---
 docs/configure.ac                    |  2 +-
 docs/misc/9pfs.pandoc                |  4 ++--
 docs/misc/livepatch.pandoc           |  4 ++--
 docs/misc/pvcalls.pandoc             |  6 +++---
 docs/misc/stubdom.txt                |  2 +-
 docs/misc/vtd.txt                    |  2 +-
 docs/misc/xen-command-line.pandoc    |  4 ++--
 docs/misc/xenstore-paths.pandoc      | 22 +++++++++++-----------
 docs/misc/xenstore.txt               |  2 +-
 docs/misc/xsm-flask.txt              |  4 ++--
 docs/process/branching-checklist.txt |  2 +-
 stubdom/configure                    |  6 +++---
 stubdom/configure.ac                 |  2 +-
 tools/configure                      |  6 +++---
 tools/configure.ac                   |  2 +-
 tools/libxl/libxlu_cfg.c             |  2 +-
 xen/arch/x86/hvm/vmx/vmx.c           |  2 +-
 xen/include/public/io/blkif.h        |  2 +-
 26 files changed, 61 insertions(+), 61 deletions(-)
Signature · 39 lines
2.11.0



Ian Jackson (3):
  docs etc.: https: Fix references to wiki.xen[project.org
  docs etc.: https: Fix references to other Xen pages
  docs/README: Fix a broken url

 README                               | 24 ++++++++++++------------
 SUPPORT.md                           |  2 +-
 config/Paths.mk.in                   |  2 +-
 configure                            |  6 +++---
 configure.ac                         |  2 +-
 docs/README.colo                     |  2 +-
 docs/README.remus                    |  2 +-
 docs/configure                       |  6 +++---
 docs/configure.ac                    |  2 +-
 docs/misc/9pfs.pandoc                |  4 ++--
 docs/misc/livepatch.pandoc           |  4 ++--
 docs/misc/pvcalls.pandoc             |  6 +++---
 docs/misc/stubdom.txt                |  2 +-
 docs/misc/vtd.txt                    |  2 +-
 docs/misc/xen-command-line.pandoc    |  4 ++--
 docs/misc/xenstore-paths.pandoc      | 22 +++++++++++-----------
 docs/misc/xenstore.txt               |  2 +-
 docs/misc/xsm-flask.txt              |  4 ++--
 docs/process/branching-checklist.txt |  2 +-
 stubdom/configure                    |  6 +++---
 stubdom/configure.ac                 |  2 +-
 tools/configure                      |  6 +++---
 tools/configure.ac                   |  2 +-
 tools/libxl/libxlu_cfg.c             |  2 +-
 xen/arch/x86/hvm/vmx/vmx.c           |  2 +-
 xen/include/public/io/blkif.h        |  2 +-
 26 files changed, 61 insertions(+), 61 deletions(-)

-- 
2.11.0
#1 lore raw

PATCH 1/3 docs etc.: https: Fix references to wiki.xen[project.org

Change the url scheme to https. This is all in-tree references to the Xen wiki.

---
 README                            | 16 ++++++++--------
 config/Paths.mk.in                |  2 +-
 docs/README.colo                  |  2 +-
 docs/README.remus                 |  2 +-
 docs/misc/stubdom.txt             |  2 +-
 docs/misc/vtd.txt                 |  2 +-
 docs/misc/xen-command-line.pandoc |  2 +-
 docs/misc/xenstore.txt            |  2 +-
 tools/libxl/libxlu_cfg.c          |  2 +-
 9 files changed, 16 insertions(+), 16 deletions(-)
README +8 -8
index 92b1de9938..712d05d69d 100644
@@ -21,15 +21,15 @@ development community, spearheaded by xen.org (http://www.xen.org).
 
 This file contains some quick-start instructions to install Xen on
 your system. For more information see http:/www.xen.org/ and
-http://wiki.xen.org/
+https://wiki.xen.org/
 
 Quick-Start Guide
 =================
 
 First, this is just a quick-start guide. For more comprehensive
 information see the INSTALL file and the Xen wiki at
-http://wiki.xenproject.org and in particular
-http://wiki.xenproject.org/wiki/Getting_Started.
+https://wiki.xenproject.org and in particular
+https://wiki.xenproject.org/wiki/Getting_Started.
 
 Second, there are a number of prerequisites for building a Xen source
 release. Make sure you have all the following installed, either by
@@ -88,10 +88,10 @@ disabled at compile time:
 Second, you need to acquire a suitable kernel for use in domain 0. If
 possible you should use a kernel provided by your OS distributor. If
 no suitable kernel is available from your OS distributor then refer to
-http://wiki.xen.org/wiki/XenDom0Kernels for suggestions for
+https://wiki.xen.org/wiki/XenDom0Kernels for suggestions for
 suitable kernels to use.
 If you are looking to compile a Dom0 kernel from source, please refer to
-http://wiki.xen.org/wiki/XenParavirtOps.
+https://wiki.xen.org/wiki/XenParavirtOps.
 
 [NB. Unless noted otherwise, all the following steps should be
 performed with root privileges.]
@@ -168,9 +168,9 @@ You can change the preferred xenstored you want to use in the configuration
 but since we cannot stop the daemon a reboot will be required to make the
 change take effect.
 
-[0] http://wiki.xen.org/wiki/XenStore
-[1] http://wiki.xen.org/wiki/XenStoreReference
-[2] http://wiki.xen.org/wiki/Xenstored
+[0] https://wiki.xen.org/wiki/XenStore
+[1] https://wiki.xen.org/wiki/XenStoreReference
+[2] https://wiki.xen.org/wiki/Xenstored
 
 Python Runtime Libraries
 ========================
config/Paths.mk.in +1 -1
index dc9d0c0353..416fc7aab9 100644
@@ -10,7 +10,7 @@
 #
 # For more documentation you can refer to the wiki:
 #
-# http://wiki.xen.org/wiki/Category:Host_Configuration#System_wide_xen_configuration
+# https://wiki.xen.org/wiki/Category:Host_Configuration#System_wide_xen_configuration
 
 PACKAGE_TARNAME          := @PACKAGE_TARNAME@
 prefix                   := @prefix@
docs/README.colo +1 -1
index 466eb72152..acb4ee5a0a 100644
@@ -5,5 +5,5 @@ response in parallel too. If the response packets from PVM and SVM are
 identical, they are released immediately. Otherwise, a VM checkpoint (on demand)
 is conducted.
 
-See the website at http://wiki.xen.org/wiki/COLO_-_Coarse_Grain_Lock_Stepping
+See the website at https://wiki.xen.org/wiki/COLO_-_Coarse_Grain_Lock_Stepping
 for details.
docs/README.remus +1 -1
index 20783c93da..e41e045a10 100644
@@ -1,7 +1,7 @@
 Remus provides fault tolerance for virtual machines by sending continuous
 checkpoints to a backup, which will activate if the target VM fails.
 
-See the website at http://wiki.xen.org/wiki/Remus for details.
+See the website at https://wiki.xen.org/wiki/Remus for details.
 
 Using Remus with libxl on Xen 4.5 and higher:
  To enable network buffering, you need libnl 3.2.8
docs/misc/stubdom.txt +1 -1
index de7b6c7d96..882a18cab4 100644
@@ -19,7 +19,7 @@ config:
     device_model_stubdomain_override = 1
 
 See xl.cfg(5) for more details of the xl domain configuration syntax
-and http://wiki.xen.org/wiki/Device_Model_Stub_Domains for more
+and https://wiki.xen.org/wiki/Device_Model_Stub_Domains for more
 information on device model stub domains
 
 
docs/misc/vtd.txt +1 -1
index 88b2102e3e..89076a0776 100644
@@ -208,7 +208,7 @@ http://www.dell.com/content/products/category.aspx/optix?c=us&cs=555&l=en&s=biz
 - HP Compaq:  DC7800
 http://h10010.www1.hp.com/wwpc/us/en/en/WF04a/12454-12454-64287-321860-3328898.html
 
-For more information, pls refer to http://wiki.xen.org/wiki/VTdHowTo.
+For more information, pls refer to https://wiki.xen.org/wiki/VTdHowTo.
 
 
 Assigning devices to HVM domains
docs/misc/xen-command-line.pandoc +1 -1
index 02432bdb25..6ff317d15d 100644
@@ -843,7 +843,7 @@ So `<sz>` being `1G+25%` on a 256 GB host would result in 65 GB.
 If you use this option then it is highly recommended that you disable
 any dom0 autoballooning feature present in your toolstack. See the
 _xl.conf(5)_ man page or [Xen Best
-Practices](http://wiki.xen.org/wiki/Xen_Best_Practices#Xen_dom0_dedicated_memory_and_preventing_dom0_memory_ballooning).
+Practices](https://wiki.xen.org/wiki/Xen_Best_Practices#Xen_dom0_dedicated_memory_and_preventing_dom0_memory_ballooning).
 
 This option doesn't have effect if pv-shim mode is enabled.
 
docs/misc/xenstore.txt +1 -1
index 7f2b388dd5..04ce0ba607 100644
@@ -168,7 +168,7 @@ SET_PERMS		<path>|<perm-as-string>|+?
 		r<domid>	read only
 		b<domid>	both read and write
 		n<domid>	no access
-	See http://wiki.xen.org/wiki/XenBus section
+	See https://wiki.xen.org/wiki/XenBus section
 	`Permissions' for details of the permissions system.
 
 ---------- Watches ----------
tools/libxl/libxlu_cfg.c +1 -1
index cafc632fc1..f9e8aa2f3a 100644
@@ -74,7 +74,7 @@ static void parse(CfgParseContext *ctx) {
         fputs(
  "warning: Config file looks like it contains Python code.\n"
  "warning:  Arbitrary Python is no longer supported.\n"
- "warning:  See http://wiki.xen.org/wiki/PythonInXlConfig\n",
+ "warning:  See https://wiki.xen.org/wiki/PythonInXlConfig\n",
               ctx->cfg->report);
     }
 }
Signature · 1 line
2.11.0
#2 lore raw

Re: [Xen-devel] [PATCH 1/3] docs etc.: https: Fix references to wiki.xen[project.org

Hi Ian,

Title: Did you intend to use {,project} rather than [project?

Cheers,

Quoted 168 lines · Ian Jackson

Change the url scheme to https. This is all in-tree references to the Xen wiki.

---
  README                            | 16 ++++++++--------
  config/Paths.mk.in                |  2 +-
  docs/README.colo                  |  2 +-
  docs/README.remus                 |  2 +-
  docs/misc/stubdom.txt             |  2 +-
  docs/misc/vtd.txt                 |  2 +-
  docs/misc/xen-command-line.pandoc |  2 +-
  docs/misc/xenstore.txt            |  2 +-
  tools/libxl/libxlu_cfg.c          |  2 +-
  9 files changed, 16 insertions(+), 16 deletions(-)
README +8 -8
index 92b1de9938..712d05d69d 100644
@@ -21,15 +21,15 @@ development community, spearheaded by xen.org (http://www.xen.org).
 
  This file contains some quick-start instructions to install Xen on
  your system. For more information see http:/www.xen.org/ and
-http://wiki.xen.org/
+https://wiki.xen.org/
 
  Quick-Start Guide
  =================
 
  First, this is just a quick-start guide. For more comprehensive
  information see the INSTALL file and the Xen wiki at
-http://wiki.xenproject.org and in particular
-http://wiki.xenproject.org/wiki/Getting_Started.
+https://wiki.xenproject.org and in particular
+https://wiki.xenproject.org/wiki/Getting_Started.
 
  Second, there are a number of prerequisites for building a Xen source
  release. Make sure you have all the following installed, either by
@@ -88,10 +88,10 @@ disabled at compile time:
  Second, you need to acquire a suitable kernel for use in domain 0. If
  possible you should use a kernel provided by your OS distributor. If
  no suitable kernel is available from your OS distributor then refer to
-http://wiki.xen.org/wiki/XenDom0Kernels for suggestions for
+https://wiki.xen.org/wiki/XenDom0Kernels for suggestions for
  suitable kernels to use.
  If you are looking to compile a Dom0 kernel from source, please refer to
-http://wiki.xen.org/wiki/XenParavirtOps.
+https://wiki.xen.org/wiki/XenParavirtOps.
 
  [NB. Unless noted otherwise, all the following steps should be
  performed with root privileges.]
@@ -168,9 +168,9 @@ You can change the preferred xenstored you want to use in the configuration
  but since we cannot stop the daemon a reboot will be required to make the
  change take effect.
 
-[0] http://wiki.xen.org/wiki/XenStore
-[1] http://wiki.xen.org/wiki/XenStoreReference
-[2] http://wiki.xen.org/wiki/Xenstored
+[0] https://wiki.xen.org/wiki/XenStore
+[1] https://wiki.xen.org/wiki/XenStoreReference
+[2] https://wiki.xen.org/wiki/Xenstored
 
  Python Runtime Libraries
  ========================
config/Paths.mk.in +1 -1
index dc9d0c0353..416fc7aab9 100644
@@ -10,7 +10,7 @@
  #
  # For more documentation you can refer to the wiki:
  #
-# http://wiki.xen.org/wiki/Category:Host_Configuration#System_wide_xen_configuration
+# https://wiki.xen.org/wiki/Category:Host_Configuration#System_wide_xen_configuration
 
  PACKAGE_TARNAME          := @PACKAGE_TARNAME@
  prefix                   := @prefix@
docs/README.colo +1 -1
index 466eb72152..acb4ee5a0a 100644
@@ -5,5 +5,5 @@ response in parallel too. If the response packets from PVM and SVM are
  identical, they are released immediately. Otherwise, a VM checkpoint (on demand)
  is conducted.
 
-See the website at http://wiki.xen.org/wiki/COLO_-_Coarse_Grain_Lock_Stepping
+See the website at https://wiki.xen.org/wiki/COLO_-_Coarse_Grain_Lock_Stepping
  for details.
docs/README.remus +1 -1
index 20783c93da..e41e045a10 100644
@@ -1,7 +1,7 @@
  Remus provides fault tolerance for virtual machines by sending continuous
  checkpoints to a backup, which will activate if the target VM fails.
 
-See the website at http://wiki.xen.org/wiki/Remus for details.
+See the website at https://wiki.xen.org/wiki/Remus for details.
 
  Using Remus with libxl on Xen 4.5 and higher:
   To enable network buffering, you need libnl 3.2.8
docs/misc/stubdom.txt +1 -1
index de7b6c7d96..882a18cab4 100644
@@ -19,7 +19,7 @@ config:
      device_model_stubdomain_override = 1
 
  See xl.cfg(5) for more details of the xl domain configuration syntax
-and http://wiki.xen.org/wiki/Device_Model_Stub_Domains for more
+and https://wiki.xen.org/wiki/Device_Model_Stub_Domains for more
  information on device model stub domains
 
 
docs/misc/vtd.txt +1 -1
index 88b2102e3e..89076a0776 100644
@@ -208,7 +208,7 @@ http://www.dell.com/content/products/category.aspx/optix?c=us&cs=555&l=en&s=biz
  - HP Compaq:  DC7800
  http://h10010.www1.hp.com/wwpc/us/en/en/WF04a/12454-12454-64287-321860-3328898.html
 
-For more information, pls refer to http://wiki.xen.org/wiki/VTdHowTo.
+For more information, pls refer to https://wiki.xen.org/wiki/VTdHowTo.
 
 
  Assigning devices to HVM domains
docs/misc/xen-command-line.pandoc +1 -1
index 02432bdb25..6ff317d15d 100644
@@ -843,7 +843,7 @@ So `<sz>` being `1G+25%` on a 256 GB host would result in 65 GB.
  If you use this option then it is highly recommended that you disable
  any dom0 autoballooning feature present in your toolstack. See the
  _xl.conf(5)_ man page or [Xen Best
-Practices](http://wiki.xen.org/wiki/Xen_Best_Practices#Xen_dom0_dedicated_memory_and_preventing_dom0_memory_ballooning).
+Practices](https://wiki.xen.org/wiki/Xen_Best_Practices#Xen_dom0_dedicated_memory_and_preventing_dom0_memory_ballooning).
 
  This option doesn't have effect if pv-shim mode is enabled.
 
docs/misc/xenstore.txt +1 -1
index 7f2b388dd5..04ce0ba607 100644
@@ -168,7 +168,7 @@ SET_PERMS		<path>|<perm-as-string>|+?
  		r<domid>	read only
  		b<domid>	both read and write
  		n<domid>	no access
-	See http://wiki.xen.org/wiki/XenBus section
+	See https://wiki.xen.org/wiki/XenBus section
  	`Permissions' for details of the permissions system.
 
  ---------- Watches ----------
tools/libxl/libxlu_cfg.c +1 -1
index cafc632fc1..f9e8aa2f3a 100644
@@ -74,7 +74,7 @@ static void parse(CfgParseContext *ctx) {
          fputs(
   "warning: Config file looks like it contains Python code.\n"
   "warning:  Arbitrary Python is no longer supported.\n"
- "warning:  See http://wiki.xen.org/wiki/PythonInXlConfig\n",
+ "warning:  See https://wiki.xen.org/wiki/PythonInXlConfig\n",
                ctx->cfg->report);
      }
  }
Signature · 1 line
Julien Grall
#3 lore raw

Re: [Xen-devel] [PATCH 1/3] docs etc.: https: Fix references to wiki.xen[project.org

Julien Grall writes ("Re: [PATCH 1/3] docs etc.: https: Fix references to wiki.xen[project.org"):

Quoted 3 lines

Hi Ian,

Title: Did you intend to use {,project} rather than [project?

I intended to use [project]. Will fix.

Ian.

#4 lore raw

PATCH 2/3 docs etc.: https: Fix references to other Xen pages

In reply to Ian Jackson

Change the url scheme to https. This is all in-tree references to xenbits and the main website except for those in Config.mk.

We leave Config.mk alone for now because those urls are used by CI systems and we need to check that nothing breaks when we change the download method.

---
 README                               |  8 ++++----
 SUPPORT.md                           |  2 +-
 configure                            |  6 +++---
 configure.ac                         |  2 +-
 docs/configure                       |  6 +++---
 docs/configure.ac                    |  2 +-
 docs/misc/9pfs.pandoc                |  4 ++--
 docs/misc/livepatch.pandoc           |  4 ++--
 docs/misc/pvcalls.pandoc             |  6 +++---
 docs/misc/xen-command-line.pandoc    |  2 +-
 docs/misc/xenstore-paths.pandoc      | 22 +++++++++++-----------
 docs/misc/xsm-flask.txt              |  4 ++--
 docs/process/branching-checklist.txt |  2 +-
 stubdom/configure                    |  6 +++---
 stubdom/configure.ac                 |  2 +-
 tools/configure                      |  6 +++---
 tools/configure.ac                   |  2 +-
 xen/arch/x86/hvm/vmx/vmx.c           |  2 +-
 xen/include/public/io/blkif.h        |  2 +-
 19 files changed, 45 insertions(+), 45 deletions(-)
README +4 -4
index 712d05d69d..555f3415fa 100644
@@ -7,7 +7,7 @@
 
 #################################
 
-http://www.xen.org/
+https://www.xen.org/
 
 What is Xen?
 ============
@@ -17,10 +17,10 @@ Systems Research Group of the University of Cambridge Computer
 Laboratory, as part of the UK-EPSRC funded XenoServers project.  Xen
 is freely-distributable Open Source software, released under the GNU
 GPL. Since its initial public release, Xen has grown a large
-development community, spearheaded by xen.org (http://www.xen.org).
+development community, spearheaded by xen.org (https://www.xen.org).
 
 This file contains some quick-start instructions to install Xen on
-your system. For more information see http:/www.xen.org/ and
+your system. For more information see https:/www.xen.org/ and
 https://wiki.xen.org/
 
 Quick-Start Guide
@@ -99,7 +99,7 @@ performed with root privileges.]
 1. Download and untar the source tarball file. This will be a
    file named xen-unstable-src.tgz, or xen-$version-src.tgz.
    You can also pull the current version from the git or mercurial
-   repositories at http://xenbits.xen.org/
+   repositories at https://xenbits.xen.org/
 
     # tar xzf xen-unstable-src.tgz
 
SUPPORT.md +1 -1
index 169b6f8fcf..7270c9b021 100644
@@ -627,7 +627,7 @@ Virtual Performance Management Unit for HVM guests
     Status, x86: Supported, Not security supported
 
 Disabled by default (enable with hypervisor command line option).
-This feature is not security supported: see http://xenbits.xen.org/xsa/advisory-163.html
+This feature is not security supported: see https://xenbits.xen.org/xsa/advisory-163.html
 
 ### Argo: Inter-domain message delivery by hypercall
 
configure +3 -3
index 83f84b049f..9da3970cef 100755
@@ -582,7 +582,7 @@ PACKAGE_TARNAME='xen'
 PACKAGE_VERSION='4.14'
 PACKAGE_STRING='Xen Hypervisor 4.14'
 PACKAGE_BUGREPORT='[email protected]'
-PACKAGE_URL='http://www.xen.org/'
+PACKAGE_URL='https://www.xen.org/'
 
 ac_unique_file="./xen/common/kernel.c"
 enable_option_checking=no
@@ -1336,7 +1336,7 @@ Optional Packages:
                           [PREFIX/lib/debug]
 
 Report bugs to <[email protected]>.
-Xen Hypervisor home page: <http://www.xen.org/>.
+Xen Hypervisor home page: <https://www.xen.org/>.
 _ACEOF
 ac_status=$?
 fi
@@ -2904,7 +2904,7 @@ Configuration files:
 $config_files
 
 Report bugs to <[email protected]>.
-Xen Hypervisor home page: <http://www.xen.org/>."
+Xen Hypervisor home page: <https://www.xen.org/>."
 
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
configure.ac +1 -1
index 7388b282f9..3aea407153 100644
@@ -3,7 +3,7 @@
 
 AC_PREREQ([2.67])
 AC_INIT([Xen Hypervisor], m4_esyscmd([./version.sh ./xen/Makefile]),
-    [[email protected]], [xen], [http://www.xen.org/])
+    [[email protected]], [xen], [https://www.xen.org/])
 AC_CONFIG_SRCDIR([./xen/common/kernel.c])
 AC_CONFIG_FILES([
 	config/Toplevel.mk
docs/configure +3 -3
index fdfc110311..9e3ed60462 100755
@@ -582,7 +582,7 @@ PACKAGE_TARNAME='xen'
 PACKAGE_VERSION='4.14'
 PACKAGE_STRING='Xen Hypervisor Documentation 4.14'
 PACKAGE_BUGREPORT='[email protected]'
-PACKAGE_URL='http://www.xen.org/'
+PACKAGE_URL='https://www.xen.org/'
 
 ac_unique_file="misc/xen-command-line.pandoc"
 ac_subst_vars='LTLIBOBJS
@@ -1320,7 +1320,7 @@ Use these variables to override the choices made by `configure' or to help
 it to find libraries and programs with nonstandard names/locations.
 
 Report bugs to <[email protected]>.
-Xen Hypervisor Documentation home page: <http://www.xen.org/>.
+Xen Hypervisor Documentation home page: <https://www.xen.org/>.
 _ACEOF
 ac_status=$?
 fi
@@ -2857,7 +2857,7 @@ Configuration files:
 $config_files
 
 Report bugs to <[email protected]>.
-Xen Hypervisor Documentation home page: <http://www.xen.org/>."
+Xen Hypervisor Documentation home page: <https://www.xen.org/>."
 
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
docs/configure.ac +1 -1
index e795bec04c..cb5a6eaa4c 100644
@@ -3,7 +3,7 @@
 
 AC_PREREQ([2.67])
 AC_INIT([Xen Hypervisor Documentation], m4_esyscmd([../version.sh ../xen/Makefile]),
-    [[email protected]], [xen], [http://www.xen.org/])
+    [[email protected]], [xen], [https://www.xen.org/])
 AC_CONFIG_SRCDIR([misc/xen-command-line.pandoc])
 AC_CONFIG_FILES([
 ../config/Docs.mk
docs/misc/9pfs.pandoc +2 -2
index a4dc86f639..b034fb5fa6 100644
@@ -415,5 +415,5 @@ the *size* field of the 9pfs header.
 
 [paper]: https://www.usenix.org/legacy/event/usenix05/tech/freenix/full_papers/hensbergen/hensbergen.pdf
 [website]: https://github.com/chaos/diod/blob/master/protocol.md
-[XenbusStateInitialising]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,xenbus.h.html
-[ring.h]: http://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=xen/include/public/io/ring.h;hb=HEAD
+[XenbusStateInitialising]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,xenbus.h.html
+[ring.h]: https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=xen/include/public/io/ring.h;hb=HEAD
docs/misc/livepatch.pandoc +2 -2
index 9473ad5991..d38e4ce074 100644
@@ -88,7 +88,7 @@ mechanism. See `Trampoline (e9 opcode)` section for more details.
 ### Example of trampoline and in-place splicing
 
 As example we will assume the hypervisor does not have XSA-132 (see
-[domctl/sysctl: don't leak hypervisor stack to toolstacks](http://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=4ff3449f0e9d175ceb9551d3f2aecb59273f639d))
+[domctl/sysctl: don't leak hypervisor stack to toolstacks](https://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=4ff3449f0e9d175ceb9551d3f2aecb59273f639d))
 and we would like to binary patch the hypervisor with it. The original code
 looks as so:
 
@@ -157,7 +157,7 @@ CPU branching logic (I-cache, but it is just one unconditional jump).
 
 For this example we will assume that the hypervisor has not been compiled with
 XSA-125 (see
-[pre-fill structures for certain HYPERVISOR_xen_version sub-ops](http://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=fe2e079f642effb3d24a6e1a7096ef26e691d93e))
+[pre-fill structures for certain HYPERVISOR_xen_version sub-ops](https://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=fe2e079f642effb3d24a6e1a7096ef26e691d93e))
 which mem-sets an structure in `xen_version` hypercall. This function is not
 called **anywhere** in the hypervisor (it is called by the guest) but
 referenced in the `compat_hypercall_table` and `hypercall_table` (and
docs/misc/pvcalls.pandoc +3 -3
index 729cf97bdf..665dad556c 100644
@@ -1078,8 +1078,8 @@ only as many bytes as available in the buffer up to *[in|out]_prod*.
 reading from the socket.
 
 
-[xenstore]: http://xenbits.xen.org/docs/unstable/misc/xenstore.txt
-[XenbusStateInitialising]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,xenbus.h.html
+[xenstore]: https://xenbits.xen.org/docs/unstable/misc/xenstore.txt
+[XenbusStateInitialising]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,xenbus.h.html
 [address]: http://pubs.opengroup.org/onlinepubs/7908799/xns/syssocket.h.html
 [in]: http://pubs.opengroup.org/onlinepubs/000095399/basedefs/netinet/in.h.html
 [socket]: http://pubs.opengroup.org/onlinepubs/009695399/functions/socket.html
@@ -1089,4 +1089,4 @@ reading from the socket.
 [listen]: http://pubs.opengroup.org/onlinepubs/7908799/xns/listen.html
 [accept]: http://pubs.opengroup.org/onlinepubs/7908799/xns/accept.html
 [poll]: http://pubs.opengroup.org/onlinepubs/7908799/xsh/poll.html
-[ring.h]: http://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=xen/include/public/io/ring.h;hb=HEAD
+[ring.h]: https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=xen/include/public/io/ring.h;hb=HEAD
docs/misc/xen-command-line.pandoc +1 -1
index 6ff317d15d..acd0b3d994 100644
@@ -2294,7 +2294,7 @@ provide access to a wealth of low level processor information.
 
 *Warning:*
 As the virtualisation is not 100% safe, don't use the vpmu flag on
-production systems (see http://xenbits.xen.org/xsa/advisory-163.html)!
+production systems (see https://xenbits.xen.org/xsa/advisory-163.html)!
 
 ### vwfi (arm)
 > `= trap | native`
docs/misc/xenstore-paths.pandoc +11 -11
index ff3ca04069..a152f5ea68 100644
@@ -636,14 +636,14 @@ for the toolstack to obtain e.g. the domain id of a xenstore domain.
 Domain Id of the xenstore domain in case xenstore is provided via a
 domain instead of a daemon in dom0.
 
-[BLKIF]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,blkif.h.html
-[FBIF]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,fbif.h.html
-[HVMPARAMS]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,hvm,params.h.html
-[KBDIF]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,kbdif.h.html
-[LIBXLMEM]: http://xenbits.xen.org/docs/unstable/misc/libxl_memory.txt
-[NETIF]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,netif.h.html
-[SCSIIF]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,vscsiif.h.html
-[SI]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,xen.h.html#Struct_start_info
-[USBIF]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,usbif.h.html
-[VCPU]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,vcpu.h.html
-[XSWIRE]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,xs_wire.h.html
+[BLKIF]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,blkif.h.html
+[FBIF]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,fbif.h.html
+[HVMPARAMS]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,hvm,params.h.html
+[KBDIF]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,kbdif.h.html
+[LIBXLMEM]: https://xenbits.xen.org/docs/unstable/misc/libxl_memory.txt
+[NETIF]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,netif.h.html
+[SCSIIF]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,vscsiif.h.html
+[SI]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,xen.h.html#Struct_start_info
+[USBIF]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,usbif.h.html
+[VCPU]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,vcpu.h.html
+[XSWIRE]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,xs_wire.h.html
docs/misc/xsm-flask.txt +2 -2
index 40e5fc845e..2419c5cf29 100644
@@ -49,13 +49,13 @@ driver domains, or stub xenstored - even if those bugs do no worse
 than reduce the security of such a system to one whose device models,
 backend drivers, or xenstore, run in dom0.
 
-For more information see http://xenbits.xen.org/xsa/advisory-77.html.
+For more information see https://xenbits.xen.org/xsa/advisory-77.html.
 
 The following interfaces are covered by this statement.  Interfaces
 not listed here are considered safe for disaggregation, security
 issues found in interfaces not listed here will be handled according
 to the normal security problem response policy
-http://www.xenproject.org/security-policy.html.
+https://www.xenproject.org/security-policy.html.
 
 __HYPERVISOR_domctl (xen/include/public/domctl.h)
 
docs/process/branching-checklist.txt +1 -1
index 1dfa1a2ec7..e286e65962 100644
@@ -25,7 +25,7 @@ ov=4.0
 
 # update xendocs@xenbits docs generator to generate new stable branch
 #  docs too. commit to git.
-* make 13:37 <ijc> http://xenbits.xen.org/docs/4.2-testing/ is now live true
+* make 13:37 <ijc> https://xenbits.xen.org/docs/4.2-testing/ is now live true
 #14:17 <ijc> HOWTO: login to xenbits. become "xendocs" . cd cronjobs . edit
 #            xenbits-docs-all.sh in the obvious way. git commit
 	ssh [email protected]
stubdom/configure +3 -3
index 8f0bdcf191..da03da535a 100755
@@ -582,7 +582,7 @@ PACKAGE_TARNAME='xen'
 PACKAGE_VERSION='4.14'
 PACKAGE_STRING='Xen Hypervisor Stub Domains 4.14'
 PACKAGE_BUGREPORT='[email protected]'
-PACKAGE_URL='http://www.xen.org/'
+PACKAGE_URL='https://www.xen.org/'
 
 ac_unique_file="xenstore-minios.cfg"
 ac_subst_vars='LTLIBOBJS
@@ -1376,7 +1376,7 @@ Use these variables to override the choices made by `configure' or to help
 it to find libraries and programs with nonstandard names/locations.
 
 Report bugs to <[email protected]>.
-Xen Hypervisor Stub Domains home page: <http://www.xen.org/>.
+Xen Hypervisor Stub Domains home page: <https://www.xen.org/>.
 _ACEOF
 ac_status=$?
 fi
@@ -4296,7 +4296,7 @@ Configuration files:
 $config_files
 
 Report bugs to <[email protected]>.
-Xen Hypervisor Stub Domains home page: <http://www.xen.org/>."
+Xen Hypervisor Stub Domains home page: <https://www.xen.org/>."
 
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
stubdom/configure.ac +1 -1
index 9066dfaaa7..a2d514c021 100644
@@ -3,7 +3,7 @@
 
 AC_PREREQ([2.67])
 AC_INIT([Xen Hypervisor Stub Domains], m4_esyscmd([../version.sh ../xen/Makefile]),
-    [[email protected]], [xen], [http://www.xen.org/])
+    [[email protected]], [xen], [https://www.xen.org/])
 AC_CONFIG_SRCDIR([xenstore-minios.cfg])
 AC_CONFIG_FILES([../config/Stubdom.mk])
 AC_CONFIG_AUX_DIR([../])
tools/configure +3 -3
index 13ee7f135c..4fa5f7b937 100755
@@ -583,7 +583,7 @@ PACKAGE_TARNAME='xen'
 PACKAGE_VERSION='4.14'
 PACKAGE_STRING='Xen Hypervisor Tools 4.14'
 PACKAGE_BUGREPORT='[email protected]'
-PACKAGE_URL='http://www.xen.org/'
+PACKAGE_URL='https://www.xen.org/'
 
 ac_unique_file="libxl/libxl.c"
 # Factoring default headers for most tests.
@@ -1611,7 +1611,7 @@ Use these variables to override the choices made by `configure' or to help
 it to find libraries and programs with nonstandard names/locations.
 
 Report bugs to <[email protected]>.
-Xen Hypervisor Tools home page: <http://www.xen.org/>.
+Xen Hypervisor Tools home page: <https://www.xen.org/>.
 _ACEOF
 ac_status=$?
 fi
@@ -10373,7 +10373,7 @@ Configuration headers:
 $config_headers
 
 Report bugs to <[email protected]>.
-Xen Hypervisor Tools home page: <http://www.xen.org/>."
+Xen Hypervisor Tools home page: <https://www.xen.org/>."
 
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
tools/configure.ac +1 -1
index f288d2cc3f..ea0272766f 100644
@@ -3,7 +3,7 @@
 
 AC_PREREQ([2.67])
 AC_INIT([Xen Hypervisor Tools], m4_esyscmd([../version.sh ../xen/Makefile]),
-    [[email protected]], [xen], [http://www.xen.org/])
+    [[email protected]], [xen], [https://www.xen.org/])
 AC_CONFIG_SRCDIR([libxl/libxl.c])
 AC_CONFIG_FILES([
 ../config/Tools.mk
xen/arch/x86/hvm/vmx/vmx.c +1 -1
index d265ed46ad..1c398fdb6e 100644
@@ -2490,7 +2490,7 @@ const struct hvm_function_table * __init start_vmx(void)
 
     /*
      * Do not enable EPT when (!cpu_has_vmx_pat), to prevent security hole
-     * (refer to http://xenbits.xen.org/xsa/advisory-60.html).
+     * (refer to https://xenbits.xen.org/xsa/advisory-60.html).
      */
     if ( cpu_has_vmx_ept && (cpu_has_vmx_pat || opt_force_ept) )
     {
xen/include/public/io/blkif.h +1 -1
index d4a34de94c..4cdba79aba 100644
@@ -118,7 +118,7 @@
  *
  *      The underlying storage is not affected by the direct IO memory
  *      lifetime bug.  See:
- *        http://lists.xen.org/archives/html/xen-devel/2012-12/msg01154.html
+ *        https://lists.xen.org/archives/html/xen-devel/2012-12/msg01154.html
  *
  *      Therefore this option gives the backend permission to use
  *      O_DIRECT, notwithstanding that bug.
Signature · 1 line
2.11.0
Reviewed-by on v1 2/3
#5 lore raw

Re: [Xen-devel] [PATCH 2/3] docs etc.: https: Fix references to other Xen pages

Hi Ian,

Quoted 8 lines · Ian Jackson

Change the url scheme to https. This is all in-tree references to xenbits and the main website except for those in Config.mk.

We leave Config.mk alone for now because those urls are used by CI systems and we need to check that nothing breaks when we change the download method.

Cheers,

Quoted 404 lines
---
  README                               |  8 ++++----
  SUPPORT.md                           |  2 +-
  configure                            |  6 +++---
  configure.ac                         |  2 +-
  docs/configure                       |  6 +++---
  docs/configure.ac                    |  2 +-
  docs/misc/9pfs.pandoc                |  4 ++--
  docs/misc/livepatch.pandoc           |  4 ++--
  docs/misc/pvcalls.pandoc             |  6 +++---
  docs/misc/xen-command-line.pandoc    |  2 +-
  docs/misc/xenstore-paths.pandoc      | 22 +++++++++++-----------
  docs/misc/xsm-flask.txt              |  4 ++--
  docs/process/branching-checklist.txt |  2 +-
  stubdom/configure                    |  6 +++---
  stubdom/configure.ac                 |  2 +-
  tools/configure                      |  6 +++---
  tools/configure.ac                   |  2 +-
  xen/arch/x86/hvm/vmx/vmx.c           |  2 +-
  xen/include/public/io/blkif.h        |  2 +-
  19 files changed, 45 insertions(+), 45 deletions(-)
README +4 -4
index 712d05d69d..555f3415fa 100644
@@ -7,7 +7,7 @@
 
  #################################
 
-http://www.xen.org/
+https://www.xen.org/
 
  What is Xen?
  ============
@@ -17,10 +17,10 @@ Systems Research Group of the University of Cambridge Computer
  Laboratory, as part of the UK-EPSRC funded XenoServers project.  Xen
  is freely-distributable Open Source software, released under the GNU
  GPL. Since its initial public release, Xen has grown a large
-development community, spearheaded by xen.org (http://www.xen.org).
+development community, spearheaded by xen.org (https://www.xen.org).
 
  This file contains some quick-start instructions to install Xen on
-your system. For more information see http:/www.xen.org/ and
+your system. For more information see https:/www.xen.org/ and
  https://wiki.xen.org/
 
  Quick-Start Guide
@@ -99,7 +99,7 @@ performed with root privileges.]
  1. Download and untar the source tarball file. This will be a
     file named xen-unstable-src.tgz, or xen-$version-src.tgz.
     You can also pull the current version from the git or mercurial
-   repositories at http://xenbits.xen.org/
+   repositories at https://xenbits.xen.org/
 
      # tar xzf xen-unstable-src.tgz
 
SUPPORT.md +1 -1
index 169b6f8fcf..7270c9b021 100644
@@ -627,7 +627,7 @@ Virtual Performance Management Unit for HVM guests
      Status, x86: Supported, Not security supported
 
  Disabled by default (enable with hypervisor command line option).
-This feature is not security supported: see http://xenbits.xen.org/xsa/advisory-163.html
+This feature is not security supported: see https://xenbits.xen.org/xsa/advisory-163.html
 
  ### Argo: Inter-domain message delivery by hypercall
 
configure +3 -3
index 83f84b049f..9da3970cef 100755
@@ -582,7 +582,7 @@ PACKAGE_TARNAME='xen'
  PACKAGE_VERSION='4.14'
  PACKAGE_STRING='Xen Hypervisor 4.14'
  PACKAGE_BUGREPORT='[email protected]'
-PACKAGE_URL='http://www.xen.org/'
+PACKAGE_URL='https://www.xen.org/'
 
  ac_unique_file="./xen/common/kernel.c"
  enable_option_checking=no
@@ -1336,7 +1336,7 @@ Optional Packages:
                            [PREFIX/lib/debug]
 
  Report bugs to <[email protected]>.
-Xen Hypervisor home page: <http://www.xen.org/>.
+Xen Hypervisor home page: <https://www.xen.org/>.
  _ACEOF
  ac_status=$?
  fi
@@ -2904,7 +2904,7 @@ Configuration files:
  $config_files
 
  Report bugs to <[email protected]>.
-Xen Hypervisor home page: <http://www.xen.org/>."
+Xen Hypervisor home page: <https://www.xen.org/>."
 
  _ACEOF
  cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
configure.ac +1 -1
index 7388b282f9..3aea407153 100644
@@ -3,7 +3,7 @@
 
  AC_PREREQ([2.67])
  AC_INIT([Xen Hypervisor], m4_esyscmd([./version.sh ./xen/Makefile]),
-    [[email protected]], [xen], [http://www.xen.org/])
+    [[email protected]], [xen], [https://www.xen.org/])
  AC_CONFIG_SRCDIR([./xen/common/kernel.c])
  AC_CONFIG_FILES([
  	config/Toplevel.mk
docs/configure +3 -3
index fdfc110311..9e3ed60462 100755
@@ -582,7 +582,7 @@ PACKAGE_TARNAME='xen'
  PACKAGE_VERSION='4.14'
  PACKAGE_STRING='Xen Hypervisor Documentation 4.14'
  PACKAGE_BUGREPORT='[email protected]'
-PACKAGE_URL='http://www.xen.org/'
+PACKAGE_URL='https://www.xen.org/'
 
  ac_unique_file="misc/xen-command-line.pandoc"
  ac_subst_vars='LTLIBOBJS
@@ -1320,7 +1320,7 @@ Use these variables to override the choices made by `configure' or to help
  it to find libraries and programs with nonstandard names/locations.
 
  Report bugs to <[email protected]>.
-Xen Hypervisor Documentation home page: <http://www.xen.org/>.
+Xen Hypervisor Documentation home page: <https://www.xen.org/>.
  _ACEOF
  ac_status=$?
  fi
@@ -2857,7 +2857,7 @@ Configuration files:
  $config_files
 
  Report bugs to <[email protected]>.
-Xen Hypervisor Documentation home page: <http://www.xen.org/>."
+Xen Hypervisor Documentation home page: <https://www.xen.org/>."
 
  _ACEOF
  cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
docs/configure.ac +1 -1
index e795bec04c..cb5a6eaa4c 100644
@@ -3,7 +3,7 @@
 
  AC_PREREQ([2.67])
  AC_INIT([Xen Hypervisor Documentation], m4_esyscmd([../version.sh ../xen/Makefile]),
-    [[email protected]], [xen], [http://www.xen.org/])
+    [[email protected]], [xen], [https://www.xen.org/])
  AC_CONFIG_SRCDIR([misc/xen-command-line.pandoc])
  AC_CONFIG_FILES([
  ../config/Docs.mk
docs/misc/9pfs.pandoc +2 -2
index a4dc86f639..b034fb5fa6 100644
@@ -415,5 +415,5 @@ the *size* field of the 9pfs header.
 
  [paper]: https://www.usenix.org/legacy/event/usenix05/tech/freenix/full_papers/hensbergen/hensbergen.pdf
  [website]: https://github.com/chaos/diod/blob/master/protocol.md
-[XenbusStateInitialising]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,xenbus.h.html
-[ring.h]: http://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=xen/include/public/io/ring.h;hb=HEAD
+[XenbusStateInitialising]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,xenbus.h.html
+[ring.h]: https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=xen/include/public/io/ring.h;hb=HEAD
docs/misc/livepatch.pandoc +2 -2
index 9473ad5991..d38e4ce074 100644
@@ -88,7 +88,7 @@ mechanism. See `Trampoline (e9 opcode)` section for more details.
  ### Example of trampoline and in-place splicing
 
  As example we will assume the hypervisor does not have XSA-132 (see
-[domctl/sysctl: don't leak hypervisor stack to toolstacks](http://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=4ff3449f0e9d175ceb9551d3f2aecb59273f639d))
+[domctl/sysctl: don't leak hypervisor stack to toolstacks](https://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=4ff3449f0e9d175ceb9551d3f2aecb59273f639d))
  and we would like to binary patch the hypervisor with it. The original code
  looks as so:
 
@@ -157,7 +157,7 @@ CPU branching logic (I-cache, but it is just one unconditional jump).
 
  For this example we will assume that the hypervisor has not been compiled with
  XSA-125 (see
-[pre-fill structures for certain HYPERVISOR_xen_version sub-ops](http://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=fe2e079f642effb3d24a6e1a7096ef26e691d93e))
+[pre-fill structures for certain HYPERVISOR_xen_version sub-ops](https://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=fe2e079f642effb3d24a6e1a7096ef26e691d93e))
  which mem-sets an structure in `xen_version` hypercall. This function is not
  called **anywhere** in the hypervisor (it is called by the guest) but
  referenced in the `compat_hypercall_table` and `hypercall_table` (and
docs/misc/pvcalls.pandoc +3 -3
index 729cf97bdf..665dad556c 100644
@@ -1078,8 +1078,8 @@ only as many bytes as available in the buffer up to *[in|out]_prod*.
  reading from the socket.
 
 
-[xenstore]: http://xenbits.xen.org/docs/unstable/misc/xenstore.txt
-[XenbusStateInitialising]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,xenbus.h.html
+[xenstore]: https://xenbits.xen.org/docs/unstable/misc/xenstore.txt
+[XenbusStateInitialising]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,xenbus.h.html
  [address]: http://pubs.opengroup.org/onlinepubs/7908799/xns/syssocket.h.html
  [in]: http://pubs.opengroup.org/onlinepubs/000095399/basedefs/netinet/in.h.html
  [socket]: http://pubs.opengroup.org/onlinepubs/009695399/functions/socket.html
@@ -1089,4 +1089,4 @@ reading from the socket.
  [listen]: http://pubs.opengroup.org/onlinepubs/7908799/xns/listen.html
  [accept]: http://pubs.opengroup.org/onlinepubs/7908799/xns/accept.html
  [poll]: http://pubs.opengroup.org/onlinepubs/7908799/xsh/poll.html
-[ring.h]: http://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=xen/include/public/io/ring.h;hb=HEAD
+[ring.h]: https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=xen/include/public/io/ring.h;hb=HEAD
docs/misc/xen-command-line.pandoc +1 -1
index 6ff317d15d..acd0b3d994 100644
@@ -2294,7 +2294,7 @@ provide access to a wealth of low level processor information.
 
  *Warning:*
  As the virtualisation is not 100% safe, don't use the vpmu flag on
-production systems (see http://xenbits.xen.org/xsa/advisory-163.html)!
+production systems (see https://xenbits.xen.org/xsa/advisory-163.html)!
 
  ### vwfi (arm)
  > `= trap | native`
docs/misc/xenstore-paths.pandoc +11 -11
index ff3ca04069..a152f5ea68 100644
@@ -636,14 +636,14 @@ for the toolstack to obtain e.g. the domain id of a xenstore domain.
  Domain Id of the xenstore domain in case xenstore is provided via a
  domain instead of a daemon in dom0.
 
-[BLKIF]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,blkif.h.html
-[FBIF]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,fbif.h.html
-[HVMPARAMS]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,hvm,params.h.html
-[KBDIF]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,kbdif.h.html
-[LIBXLMEM]: http://xenbits.xen.org/docs/unstable/misc/libxl_memory.txt
-[NETIF]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,netif.h.html
-[SCSIIF]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,vscsiif.h.html
-[SI]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,xen.h.html#Struct_start_info
-[USBIF]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,usbif.h.html
-[VCPU]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,vcpu.h.html
-[XSWIRE]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,xs_wire.h.html
+[BLKIF]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,blkif.h.html
+[FBIF]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,fbif.h.html
+[HVMPARAMS]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,hvm,params.h.html
+[KBDIF]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,kbdif.h.html
+[LIBXLMEM]: https://xenbits.xen.org/docs/unstable/misc/libxl_memory.txt
+[NETIF]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,netif.h.html
+[SCSIIF]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,vscsiif.h.html
+[SI]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,xen.h.html#Struct_start_info
+[USBIF]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,usbif.h.html
+[VCPU]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,vcpu.h.html
+[XSWIRE]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,xs_wire.h.html
docs/misc/xsm-flask.txt +2 -2
index 40e5fc845e..2419c5cf29 100644
@@ -49,13 +49,13 @@ driver domains, or stub xenstored - even if those bugs do no worse
  than reduce the security of such a system to one whose device models,
  backend drivers, or xenstore, run in dom0.
 
-For more information see http://xenbits.xen.org/xsa/advisory-77.html.
+For more information see https://xenbits.xen.org/xsa/advisory-77.html.
 
  The following interfaces are covered by this statement.  Interfaces
  not listed here are considered safe for disaggregation, security
  issues found in interfaces not listed here will be handled according
  to the normal security problem response policy
-http://www.xenproject.org/security-policy.html.
+https://www.xenproject.org/security-policy.html.
 
  __HYPERVISOR_domctl (xen/include/public/domctl.h)
 
docs/process/branching-checklist.txt +1 -1
index 1dfa1a2ec7..e286e65962 100644
@@ -25,7 +25,7 @@ ov=4.0
 
  # update xendocs@xenbits docs generator to generate new stable branch
  #  docs too. commit to git.
-* make 13:37 <ijc> http://xenbits.xen.org/docs/4.2-testing/ is now live true
+* make 13:37 <ijc> https://xenbits.xen.org/docs/4.2-testing/ is now live true
  #14:17 <ijc> HOWTO: login to xenbits. become "xendocs" . cd cronjobs . edit
  #            xenbits-docs-all.sh in the obvious way. git commit
  	ssh [email protected]
stubdom/configure +3 -3
index 8f0bdcf191..da03da535a 100755
@@ -582,7 +582,7 @@ PACKAGE_TARNAME='xen'
  PACKAGE_VERSION='4.14'
  PACKAGE_STRING='Xen Hypervisor Stub Domains 4.14'
  PACKAGE_BUGREPORT='[email protected]'
-PACKAGE_URL='http://www.xen.org/'
+PACKAGE_URL='https://www.xen.org/'
 
  ac_unique_file="xenstore-minios.cfg"
  ac_subst_vars='LTLIBOBJS
@@ -1376,7 +1376,7 @@ Use these variables to override the choices made by `configure' or to help
  it to find libraries and programs with nonstandard names/locations.
 
  Report bugs to <[email protected]>.
-Xen Hypervisor Stub Domains home page: <http://www.xen.org/>.
+Xen Hypervisor Stub Domains home page: <https://www.xen.org/>.
  _ACEOF
  ac_status=$?
  fi
@@ -4296,7 +4296,7 @@ Configuration files:
  $config_files
 
  Report bugs to <[email protected]>.
-Xen Hypervisor Stub Domains home page: <http://www.xen.org/>."
+Xen Hypervisor Stub Domains home page: <https://www.xen.org/>."
 
  _ACEOF
  cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
stubdom/configure.ac +1 -1
index 9066dfaaa7..a2d514c021 100644
@@ -3,7 +3,7 @@
 
  AC_PREREQ([2.67])
  AC_INIT([Xen Hypervisor Stub Domains], m4_esyscmd([../version.sh ../xen/Makefile]),
-    [[email protected]], [xen], [http://www.xen.org/])
+    [[email protected]], [xen], [https://www.xen.org/])
  AC_CONFIG_SRCDIR([xenstore-minios.cfg])
  AC_CONFIG_FILES([../config/Stubdom.mk])
  AC_CONFIG_AUX_DIR([../])
tools/configure +3 -3
index 13ee7f135c..4fa5f7b937 100755
@@ -583,7 +583,7 @@ PACKAGE_TARNAME='xen'
  PACKAGE_VERSION='4.14'
  PACKAGE_STRING='Xen Hypervisor Tools 4.14'
  PACKAGE_BUGREPORT='[email protected]'
-PACKAGE_URL='http://www.xen.org/'
+PACKAGE_URL='https://www.xen.org/'
 
  ac_unique_file="libxl/libxl.c"
  # Factoring default headers for most tests.
@@ -1611,7 +1611,7 @@ Use these variables to override the choices made by `configure' or to help
  it to find libraries and programs with nonstandard names/locations.
 
  Report bugs to <[email protected]>.
-Xen Hypervisor Tools home page: <http://www.xen.org/>.
+Xen Hypervisor Tools home page: <https://www.xen.org/>.
  _ACEOF
  ac_status=$?
  fi
@@ -10373,7 +10373,7 @@ Configuration headers:
  $config_headers
 
  Report bugs to <[email protected]>.
-Xen Hypervisor Tools home page: <http://www.xen.org/>."
+Xen Hypervisor Tools home page: <https://www.xen.org/>."
 
  _ACEOF
  cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
tools/configure.ac +1 -1
index f288d2cc3f..ea0272766f 100644
@@ -3,7 +3,7 @@
 
  AC_PREREQ([2.67])
  AC_INIT([Xen Hypervisor Tools], m4_esyscmd([../version.sh ../xen/Makefile]),
-    [[email protected]], [xen], [http://www.xen.org/])
+    [[email protected]], [xen], [https://www.xen.org/])
  AC_CONFIG_SRCDIR([libxl/libxl.c])
  AC_CONFIG_FILES([
  ../config/Tools.mk
xen/arch/x86/hvm/vmx/vmx.c +1 -1
index d265ed46ad..1c398fdb6e 100644
@@ -2490,7 +2490,7 @@ const struct hvm_function_table * __init start_vmx(void)
 
      /*
       * Do not enable EPT when (!cpu_has_vmx_pat), to prevent security hole
-     * (refer to http://xenbits.xen.org/xsa/advisory-60.html).
+     * (refer to https://xenbits.xen.org/xsa/advisory-60.html).
       */
      if ( cpu_has_vmx_ept && (cpu_has_vmx_pat || opt_force_ept) )
      {
xen/include/public/io/blkif.h +1 -1
index d4a34de94c..4cdba79aba 100644
@@ -118,7 +118,7 @@
   *
   *      The underlying storage is not affected by the direct IO memory
   *      lifetime bug.  See:
- *        http://lists.xen.org/archives/html/xen-devel/2012-12/msg01154.html
+ *        https://lists.xen.org/archives/html/xen-devel/2012-12/msg01154.html
   *
   *      Therefore this option gives the backend permission to use
   *      O_DIRECT, notwithstanding that bug.
Signature · 1 line
Julien Grall
#6 lore raw

PATCH 3/3 docs/README: Fix a broken url

In reply to Ian Jackson

There was a / missing here.

---
 README | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
README +1 -1
index 555f3415fa..d0c87a78f0 100644
@@ -20,7 +20,7 @@ GPL. Since its initial public release, Xen has grown a large
 development community, spearheaded by xen.org (https://www.xen.org).
 
 This file contains some quick-start instructions to install Xen on
-your system. For more information see https:/www.xen.org/ and
+your system. For more information see https://www.xen.org/ and
 https://wiki.xen.org/
 
 Quick-Start Guide
Signature · 1 line
2.11.0
Reviewed-by on v1 3/3
#7 lore raw

Re: [Xen-devel] [PATCH 3/3] docs/README: Fix a broken url

Hi Ian,

Quoted 3 lines · Ian Jackson

There was a / missing here.

Cheers,

Quoted 18 lines
---
  README | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
README +1 -1
index 555f3415fa..d0c87a78f0 100644
@@ -20,7 +20,7 @@ GPL. Since its initial public release, Xen has grown a large
  development community, spearheaded by xen.org (https://www.xen.org).
 
  This file contains some quick-start instructions to install Xen on
-your system. For more information see https:/www.xen.org/ and
+your system. For more information see https://www.xen.org/ and
  https://wiki.xen.org/
 
  Quick-Start Guide
Signature · 1 line
Julien Grall