drm/i915: Disable Panel Self Refresh (PSR) by default
Subsystems (3)
cover drm/i915: Disable Panel Self Refresh (PSR) by default
From: Sultan Alsawaf <[email protected]>
Hi,
Laptops which support an esoteric power-saving mechanism called Panel Self Refresh (PSR) suffer from severe graphical corruption and flickering. Enabled by default in 5.0, PSR causes graphical corruption to the point of unusability on many Dell laptops made within the past few years, since they typically support PSR. A bug was filed with Intel several months ago for this with more information [1]. I suspect most of the community hasn't been affected by this bug because ThinkPads and many other laptops I checked didn't support PSR. As of writing, the issues I observed with PSR are neither fully fixed in Intel's drm-tip branch nor in 5.6. Disabling PSR by default brings us safely back to pre-5.0 behavior, remedying the glitches. Also, Ubuntu now ships with PSR disabled by default in its affected kernels, so there is distro support behind this change.
Thanks,
Sultan
[1] https://gitlab.freedesktop.org/drm/intel/issues/425
Sultan Alsawaf (1):
drm/i915: Disable Panel Self Refresh (PSR) by default
drivers/gpu/drm/i915/i915_params.c | 3 +-- drivers/gpu/drm/i915/i915_params.h | 2 +- 2 files changed, 2 insertions(+), 3 deletions(-)
Signature · 1 line
2.26.0
PATCH 1/1 drm/i915: Disable Panel Self Refresh (PSR) by default
From: Sultan Alsawaf <[email protected]>
On all Dell laptops with panels and chipsets that support PSR (an esoteric power-saving mechanism), both PSR1 and PSR2 cause flickering and graphical glitches, sometimes to the point of making the laptop unusable. Many laptops don't support PSR so it isn't known if PSR works correctly on any consumer hardware right now. PSR was enabled by default in 5.0 for capable hardware, so this patch just restores the previous functionality of PSR being disabled by default.
More info is available on the freedesktop bug:
https://gitlab.freedesktop.org/drm/intel/issues/425
--- drivers/gpu/drm/i915/i915_params.c | 3 +-- drivers/gpu/drm/i915/i915_params.h | 2 +- 2 files changed, 2 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/i915_params.c +1 -2
@@ -85,8 +85,7 @@ i915_param_named_unsafe(enable_hangcheck, bool, 0600,i915_param_named_unsafe (enable_psr, int,0600 ,"Enable PSR " -"(0=disabled, 1=enabled) " -"Default: -1 (use per-chip default)" ); +"(-1=use per-chip default, 0=disabled [default], 1=enabled) " );i915_param_named_unsafe (force_probe, charp,0400 , "Force probe the driver for specified devices. "
drivers/gpu/drm/i915/i915_params.h +1 -1
@@ -50,7 +50,7 @@ struct drm_printer; param(int, vbt_sdvo_panel_type, -1) \ param(int, enable_dc, -1) \ param(int, enable_fbc, -1) \ - param(int, enable_psr, -1) \ + param(int, enable_psr, 0) \ param(int, disable_power_well, -1) \ param(int, enable_ips, 1) \param (int, invert_brightness,0 ) \
Signature · 1 line
2.26.0