Doc: drop support for docbook-xsl before 1.74
Subsystems (2)
cover Doc: drop support for docbook-xsl before 1.74
In the documentation Makefile and a few helper conf and xsl files, we carry various workarounds to make the docs build at all or to look better with older docbook-xsl versions. Let's see if we can't just drop that support. All of this seems to have been useful at one point, but I doubt that anyone needs this nowadays. This was also suggested in [1].
The final commit in this series bumps the minimum required version of docbook-xsl to 1.74.0, which is from June 2008. The whole series should be a no-op unless you're on an older release than that. That said, I've only tested this with the version that comes with my OS, 1.79.1.
After this series, user-manual.conf still refers to older docbook-xsl versions. The proper fix there might be to actually be a bit more aggressive and drop that hunk, making the rendered docs prettier. There's some history there, including mentions of texinfo, which is outside my comfort zone. I've got work in progress there, but I'd rather submit that separately from these "expected no-op" patches.
Martin
[1] https://lore.kernel.org/git/[email protected]/
Martin Ågren (6):
Doc: drop support for docbook-xsl before 1.71.1
Doc: drop support for docbook-xsl before 1.72.0
Doc: drop support for docbook-xsl before 1.73.0 manpage-bold-literal.xsl: stop using git.docbook.backslash manpage-normal.xsl: fold in manpage-base.xsl
INSTALL: drop support for docbook-xsl before 1.74
Documentation/Makefile | 23 ----------------- Documentation/asciidoc.conf | 19 -------------- Documentation/manpage-1.72.xsl | 14 ----------- Documentation/manpage-base.xsl | 35 -------------------------- Documentation/manpage-bold-literal.xsl | 6 ++--- Documentation/manpage-normal.xsl | 25 +++++++++++++----- Documentation/manpage-suppress-sp.xsl | 21 ---------------- Makefile | 6 ----- INSTALL | 4 +-- 9 files changed, 22 insertions(+), 131 deletions(-) delete mode 100644 Documentation/manpage-1.72.xsl delete mode 100644 Documentation/manpage-base.xsl delete mode 100644 Documentation/manpage-suppress-sp.xsl
Signature · 1 line
2.26.0
PATCH 1/6 Doc: drop support for docbook-xsl before 1.71.1
Drop the DOCBOOK_SUPPRESS_SP mechanism, which needs to be used with docbook-xsl versions 1.69.1 through 1.71.0.
We probably broke this for Asciidoctor builds in f6461b82b9 ("Documentation: fix build with Asciidoctor 2", 2019-09-15). That is, we should/could fix this similar to 55aca515eb ("manpage-bold-literal.xsl:
match for namespaced "d:literal" in template", 2019-10-31). But rather than digging out such an old version of docbook-xsl to test that, let's just use this as an excuse for dropping this decade-old workaround.
DOCBOOK_SUPPRESS_SP was not needed with docbook-xsl 1.69.0 and older. Maybe such old versions still work fine on our docs, or maybe not. Let's just refer to everything before 1.71.1 as "not supported". The next commit will increase the required/assumed version further.
--- Documentation/Makefile | 7 +------ Documentation/manpage-suppress-sp.xsl | 21 --------------------- INSTALL | 1 + 3 files changed, 2 insertions(+), 27 deletions(-) delete mode 100644 Documentation/manpage-suppress-sp.xsl
Documentation/Makefile +1 -6
@@ -151,9 +151,7 @@ endif # # For docbook-xsl ... -# -1.68.1, no extra settings are needed? -# 1.69.0, set ASCIIDOC_ROFF? -# 1.69.1-1.71.0, set DOCBOOK_SUPPRESS_SP? +# -1.71.0, not supported # 1.71.1, set ASCIIDOC_ROFF? # 1.72.0, set DOCBOOK_XSL_172. # 1.73.0-, no extra settings are needed
@@ -172,9 +170,6 @@ endif ifndef NO_MAN_BOLD_LITERAL XMLTO_EXTRA += -m manpage-bold-literal.xsl endif -ifdef DOCBOOK_SUPPRESS_SP -XMLTO_EXTRA += -m manpage-suppress-sp.xsl -endif # Newer DocBook stylesheet emits warning cruft in the output when # this is not set, and if set it shows an absolute link. Older
Documentation/manpage-suppress-sp.xsl deleted +0 -21
@@ -1,21 +0,0 @@ -<!-- manpage-suppress-sp.xsl: - special settings for manpages rendered from asciidoc+docbook - handles erroneous, inline .sp in manpage output of some - versions of docbook-xsl --> -<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" - version="1.0"> - -<!-- attempt to work around spurious .sp at the tail of the line - that some versions of docbook stylesheets seem to add --> -<xsl:template match="simpara"> - <xsl:variable name="content"> - <xsl:apply-templates/> - </xsl:variable> - <xsl:value-of select="normalize-space($content)"/> - <xsl:if test="not(ancestor::authorblurb) and - not(ancestor::personblurb)"> - <xsl:text> </xsl:text> - </xsl:if> -</xsl:template> - -</xsl:stylesheet>
INSTALL +1 -0
@@ -206,6 +206,7 @@ Issues of note: clone two separate git-htmldocs and git-manpages repositories next to the clone of git itself. + The minimum supported version of docbook-xsl is 1.71.1. It has been reported that docbook-xsl version 1.72 and 1.73 are buggy; 1.72 misformats manual pages for callouts, and 1.73 needs the patch in contrib/patches/docbook-xsl-manpages-charmap.patch
Signature · 1 line
2.26.0
PATCH 2/6 Doc: drop support for docbook-xsl before 1.72.0
In reply to Martin Ågrendocbook-xsl 1.72.0 is thirteen years old. Drop the ASCIIDOC_ROFF knob which was needed to support 1.68.1 - 1.71.1. The next commit will increase the required/assumed version further.
--- Documentation/Makefile | 10 +--------- Documentation/asciidoc.conf | 19 ------------------- Makefile | 3 --- INSTALL | 2 +- 4 files changed, 2 insertions(+), 32 deletions(-)
Documentation/Makefile +1 -9
@@ -151,21 +151,13 @@ endif # # For docbook-xsl ... -# -1.71.0, not supported -# 1.71.1, set ASCIIDOC_ROFF? +# -1.71.1, not supported # 1.72.0, set DOCBOOK_XSL_172. # 1.73.0-, no extra settings are needed # ifdef DOCBOOK_XSL_172 -ASCIIDOC_EXTRA += -a git-asciidoc-no-roff MANPAGE_XSL = manpage-1.72.xsl -else - ifndef ASCIIDOC_ROFF - # docbook-xsl after 1.72 needs the regular XSL, but will not - # pass-thru raw roff codes from asciidoc.conf, so turn them off. - ASCIIDOC_EXTRA += -a git-asciidoc-no-roff - endif endif ifndef NO_MAN_BOLD_LITERAL XMLTO_EXTRA += -m manpage-bold-literal.xsl
Documentation/asciidoc.conf +0 -19
@@ -31,24 +31,6 @@ ifdef::backend-docbook[] endif::backend-docbook[] ifdef::backend-docbook[] -ifndef::git-asciidoc-no-roff[] -# "unbreak" docbook-xsl v1.68 for manpages. v1.69 works with or without this. -# v1.72 breaks with this because it replaces dots not in roff requests. -[listingblock] -<example><title>{title}</title> -<literallayout class="monospaced"> -ifdef::doctype-manpage[] - .ft C -endif::doctype-manpage[] -| -ifdef::doctype-manpage[] - .ft -endif::doctype-manpage[] -</literallayout> -{title#}</example> -endif::git-asciidoc-no-roff[] - -ifdef::git-asciidoc-no-roff[] ifdef::doctype-manpage[] # The following two small workarounds insert a simple paragraph after screen [listingblock]
@@ -67,7 +49,6 @@ ifdef::doctype-manpage[] {title#}</para></formalpara> {title%}<simpara></simpara> endif::doctype-manpage[] -endif::git-asciidoc-no-roff[] endif::backend-docbook[] ifdef::doctype-manpage[]
Makefile +0 -3
@@ -285,9 +285,6 @@ all:: # Define DOCBOOK_XSL_172 if you want to format man pages with DocBook XSL v1.72 # (not v1.73 or v1.71). # -# Define ASCIIDOC_ROFF if your DocBook XSL does not escape raw roff directives -# (versions 1.68.1 through v1.72). -# # Define GNU_ROFF if your target system uses GNU groff. This forces # apostrophes to be ASCII so that cut&pasting examples to the shell # will work.
INSTALL +1 -1
@@ -206,7 +206,7 @@ Issues of note: clone two separate git-htmldocs and git-manpages repositories next to the clone of git itself. - The minimum supported version of docbook-xsl is 1.71.1. + The minimum supported version of docbook-xsl is 1.72. It has been reported that docbook-xsl version 1.72 and 1.73 are buggy; 1.72 misformats manual pages for callouts, and 1.73 needs the patch in contrib/patches/docbook-xsl-manpages-charmap.patch
Signature · 1 line
2.26.0
PATCH 3/6 Doc: drop support for docbook-xsl before 1.73.0
In reply to Martin ÅgrenDrop the DOCBOOK_XSL_172 config knob, which was needed with docbook-xsl 1.72 (but neither 1.71 nor 1.73). Version 1.73.0 is more than twelve years old.
Together with the last few commits, we are now at a point where we don't have any Makefile knobs to cater to old/broken versions of docbook-xsl.
--- Documentation/Makefile | 10 ---------- Documentation/manpage-1.72.xsl | 14 -------------- Documentation/manpage-normal.xsl | 3 +-- Makefile | 3 --- INSTALL | 5 ++--- 5 files changed, 3 insertions(+), 32 deletions(-) delete mode 100644 Documentation/manpage-1.72.xsl
Documentation/Makefile +0 -10
@@ -149,16 +149,6 @@ endif -include ../config.mak.autogen -include ../config.mak -# -# For docbook-xsl ... -# -1.71.1, not supported -# 1.72.0, set DOCBOOK_XSL_172. -# 1.73.0-, no extra settings are needed -# - -ifdef DOCBOOK_XSL_172 -MANPAGE_XSL = manpage-1.72.xsl -endif ifndef NO_MAN_BOLD_LITERAL XMLTO_EXTRA += -m manpage-bold-literal.xsl endif
Documentation/manpage-1.72.xsl deleted +0 -14
@@ -1,14 +0,0 @@ -<!-- manpage-1.72.xsl: - special settings for manpages rendered from asciidoc+docbook - handles peculiarities in docbook-xsl 1.72.0 --> -<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" - version="1.0"> - -<xsl:import href="manpage-base.xsl"/> - -<!-- these are the special values for the roff control characters - needed for docbook-xsl 1.72.0 --> -<xsl:param name="git.docbook.backslash">▓</xsl:param> -<xsl:param name="git.docbook.dot" >⌂</xsl:param> - -</xsl:stylesheet>
Documentation/manpage-normal.xsl +1 -2
@@ -1,6 +1,5 @@ <!-- manpage-normal.xsl: - special settings for manpages rendered from asciidoc+docbook - handles anything we want to keep away from docbook-xsl 1.72.0 --> + special settings for manpages rendered from asciidoc+docbook --> <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
Makefile +0 -3
@@ -282,9 +282,6 @@ all:: # Define NO_ST_BLOCKS_IN_STRUCT_STAT if your platform does not have st_blocks # field that counts the on-disk footprint in 512-byte blocks. # -# Define DOCBOOK_XSL_172 if you want to format man pages with DocBook XSL v1.72 -# (not v1.73 or v1.71). -# # Define GNU_ROFF if your target system uses GNU groff. This forces # apostrophes to be ASCII so that cut&pasting examples to the shell # will work.
INSTALL +2 -3
@@ -206,9 +206,8 @@ Issues of note: clone two separate git-htmldocs and git-manpages repositories next to the clone of git itself. - The minimum supported version of docbook-xsl is 1.72. - It has been reported that docbook-xsl version 1.72 and 1.73 are - buggy; 1.72 misformats manual pages for callouts, and 1.73 needs + The minimum supported version of docbook-xsl is 1.73. + It has been reported that docbook-xsl version 1.73 is buggy; it needs the patch in contrib/patches/docbook-xsl-manpages-charmap.patch Users attempting to build the documentation on Cygwin may need to ensure
Signature · 1 line
2.26.0
PATCH 4/6 manpage-bold-literal.xsl: stop using git.docbook.backslash
In reply to Martin ÅgrenWe used to assign git.docbook.backslash one of two different values -- one "normal" and one for working around a problem with docbook-xsl 1.72. After the previous commit, we don't support that version anymore and always use the "normal" value, a literal backslash.
Just explicitly use a backslash instead of using git.docbook.backslash. The next commit will drop the definition of git.docbook.backslash entirely.
--- Documentation/manpage-bold-literal.xsl | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
Documentation/manpage-bold-literal.xsl +2 -4
@@ -8,11 +8,9 @@ this makes literal text easier to distinguish in manpages viewed on a tty --> <xsl:template match="literal|d:literal"> - <xsl:value-of select="$git.docbook.backslash"/> - <xsl:text>fB</xsl:text> + <xsl:text>\fB</xsl:text> <xsl:apply-templates/> - <xsl:value-of select="$git.docbook.backslash"/> - <xsl:text>fR</xsl:text> + <xsl:text>\fR</xsl:text> </xsl:template> </xsl:stylesheet>
Signature · 1 line
2.26.0
PATCH 5/6 manpage-normal.xsl: fold in manpage-base.xsl
In reply to Martin ÅgrenAfter an earlier commit, we only include manpage-base.xsl from a single file, manpage-normal.xsl. Fold the former into the latter.
We only ever needed the "base, normal and non-normal" construct to support a single non-normal case, namely to work around issues with docbook-xsl 1.72 handling backslashes and dots. If we ever need something like this again, we can re-introduce manpage-base.xsl and friends. Whatever issue we'd be trying to work around, it probably wouldn't involve dots and backslashes like this, anyway.
--- Documentation/manpage-base.xsl | 35 -------------------------------- Documentation/manpage-normal.xsl | 22 ++++++++++++++++---- 2 files changed, 18 insertions(+), 39 deletions(-) delete mode 100644 Documentation/manpage-base.xsl
Documentation/manpage-base.xsl deleted +0 -35
@@ -1,35 +0,0 @@ -<!-- manpage-base.xsl: - special formatting for manpages rendered from asciidoc+docbook --> -<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" - version="1.0"> - -<!-- these params silence some output from xmlto --> -<xsl:param name="man.output.quietly" select="1"/> -<xsl:param name="refentry.meta.get.quietly" select="1"/> - -<!-- convert asciidoc callouts to man page format; - git.docbook.backslash and git.docbook.dot params - must be supplied by another XSL file or other means --> -<xsl:template match="co"> - <xsl:value-of select="concat( - $git.docbook.backslash,'fB(', - substring-after(@id,'-'),')', - $git.docbook.backslash,'fR')"/> -</xsl:template> -<xsl:template match="calloutlist"> - <xsl:value-of select="$git.docbook.dot"/> - <xsl:text>sp </xsl:text> - <xsl:apply-templates/> - <xsl:text> </xsl:text> -</xsl:template> -<xsl:template match="callout"> - <xsl:value-of select="concat( - $git.docbook.backslash,'fB', - substring-after(@arearefs,'-'), - '. ',$git.docbook.backslash,'fR')"/> - <xsl:apply-templates/> - <xsl:value-of select="$git.docbook.dot"/> - <xsl:text>br </xsl:text> -</xsl:template> - -</xsl:stylesheet>
Documentation/manpage-normal.xsl +18 -4
@@ -3,10 +3,24 @@ <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0"> -<xsl:import href="manpage-base.xsl"/> -<!-- these are the normal values for the roff control characters --> -<xsl:param name="git.docbook.backslash">\</xsl:param> -<xsl:param name="git.docbook.dot" >.</xsl:param> +<!-- these params silence some output from xmlto --> +<xsl:param name="man.output.quietly" select="1"/> +<xsl:param name="refentry.meta.get.quietly" select="1"/> + +<!-- convert asciidoc callouts to man page format --> +<xsl:template match="co"> + <xsl:value-of select="concat('\fB(',substring-after(@id,'-'),')\fR')"/> +</xsl:template> +<xsl:template match="calloutlist"> + <xsl:text>.sp </xsl:text> + <xsl:apply-templates/> + <xsl:text> </xsl:text> +</xsl:template> +<xsl:template match="callout"> + <xsl:value-of select="concat('\fB',substring-after(@arearefs,'-'),'. \fR')"/> + <xsl:apply-templates/> + <xsl:text>.br </xsl:text> +</xsl:template> </xsl:stylesheet>
Signature · 1 line
2.26.0
PATCH 6/6 INSTALL: drop support for docbook-xsl before 1.74
In reply to Martin ÅgrenSeveral of the previous commits have been bumping the minimum supported version of docbook-xsl and dropping various workarounds. Most recently, we made the minimum be 1.73.0.
In INSTALL, we claim that with 1.73, one needs a certain patch in contrib/patches/. There is no such patch. It was added in 2ec39edad9 ("INSTALL: add warning on docbook-xsl 1.72 and 1.73", 2007-08-03) and dropped in 9721ac9010 ("contrib: remove continuous/ and patches/", 2013-06-03).
Rather than resurrecting version 1.73 and the patch and testing them, just raise our minimum supported docbook-xsl version to 1.74.
--- INSTALL | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
INSTALL +1 -3
@@ -206,9 +206,7 @@ Issues of note: clone two separate git-htmldocs and git-manpages repositories next to the clone of git itself. - The minimum supported version of docbook-xsl is 1.73. - It has been reported that docbook-xsl version 1.73 is buggy; it needs - the patch in contrib/patches/docbook-xsl-manpages-charmap.patch + The minimum supported version of docbook-xsl is 1.74. Users attempting to build the documentation on Cygwin may need to ensure that the /etc/xml/catalog file looks something like this:
Signature · 1 line
2.26.0
Re: [PATCH 6/6] INSTALL: drop support for docbook-xsl before 1.74
Quoted 9 lines · Martin Ågren
Several of the previous commits have been bumping the minimum supported version of docbook-xsl and dropping various workarounds. Most recently, we made the minimum be 1.73.0.
In INSTALL, we claim that with 1.73, one needs a certain patch in contrib/patches/. There is no such patch. It was added in
2ec39edad9("INSTALL: add warning on docbook-xsl 1.72 and 1.73", 2007-08-03) and dropped in9721ac9010("contrib: remove continuous/ and patches/", 2013-06-03).
Perhaps nobody asking about the missing patch since 2013 should be a hint that nobody cares about these old versions. :)
Quoted 2 lines
Rather than resurrecting version 1.73 and the patch and testing them, just raise our minimum supported docbook-xsl version to 1.74.
Makes sense.
-Peff
Quoted 6 lines · Martin Ågren
After this series, user-manual.conf still refers to older docbook-xsl versions. The proper fix there might be to actually be a bit more aggressive and drop that hunk, making the rendered docs prettier. There's some history there, including mentions of texinfo, which is outside my comfort zone. I've got work in progress there, but I'd rather submit that separately from these "expected no-op" patches.
It certainly is long overdue to write off these versions as too old to matter.
Thanks. Will queue.
Quoted 5 lines · Martin Ågren
In the documentation
Makefileand a few helper conf and xsl files, we carry various workarounds to make the docs build at all or to look better with older docbook-xsl versions. Let's see if we can't just drop that support. All of this seems to have been useful at one point, but I doubt that anyone needs this nowadays. This was also suggested in [1].
Yay, I'm very happy to see this series. I'd be happy to go even further if there's some benefit, but I think this removes the last of the Makefile knobs.
Thanks for splitting each version bump into its own patch. That made it a lot easier to see what we we're gaining from each one.
I double-checked that there's no difference with doc-diff when using a modern asciidoc/docbook combo, though I'm sure you did as well.
Quoted 6 lines
After this series, user-manual.conf still refers to older docbook-xsl versions. The proper fix there might be to actually be a bit more aggressive and drop that hunk, making the rendered docs prettier. There's some history there, including mentions of texinfo, which is outside my comfort zone. I've got work in progress there, but I'd rather submit that separately from these "expected no-op" patches.
Yeah, dropping that bit from user-manual.conf seems reasonable. That shouldn't show anything in doc-diff because it's not installed with the manpages. And the HTML build wouldn't use docbook. I installed the zillion packages needed to build user-manual.pdf. The behavior without that block looks significantly nicer (the example blocks are actually shaded).
The very first example block in section 1.1 has some funny indentation, but that's true before or after.
Anyway, that was just for my own curiosity. If you've got further work in that area and prefer to do it as a separate series, that's fine by me.
-Peff
Quoted 6 lines · Jeff King
On Sun, Mar 29, 2020 at 03:18:04PM +0200, Martin Ågren wrote:
Yay, I'm very happy to see this series. I'd be happy to go even further if there's some benefit, but I think this removes the last of the
Makefileknobs.
Yes, I should have been clear about that: This does remove the last Makefile knob. At least I couldn't find any more with some browsing and grepping.
Quoted 7 lines
Quoted 6 lines
After this series, user-manual.conf still refers to older docbook-xsl versions. The proper fix there might be to actually be a bit more aggressive and drop that hunk, making the rendered docs prettier. There's some history there, including mentions of texinfo, which is outside my comfort zone. I've got work in progress there, but I'd rather submit that separately from these "expected no-op" patches.
Quoted 6 lines
Yeah, dropping that bit from user-manual.conf seems reasonable. That shouldn't show anything in doc-diff because it's not installed with the manpages. And the HTML build wouldn't use docbook. I installed the zillion packages needed to build user-manual.pdf. The behavior without that block looks significantly nicer (the example blocks are actually shaded).
This matches what I've seen.
Quoted 3 lines
Anyway, that was just for my own curiosity. If you've got further work in that area and prefer to do it as a separate series, that's fine by me.
Not sure about "further work" really. I'm pretty sure you tried out the exact same diff that I have, and I'm glad you agree it looks prettier / "significantly nicer". A small part of why I didn't submit it is that it's user manual vs man pages. Another part is that it's an intentional change as opposed to an intended no-op.
But most importantly: When I looked into the history, I came upon c2a7f5d438 ("docs: monospace listings in docbook output", 2012-08-07), which made me worry about breaking "make info". On second thought, I might have broken it many times already over the past few years, since I've never built the info. So maybe worrying about that all of a sudden is a bit unfounded in a way. :-/
(I tried to build "info" while working on this. It works in the sense that it doesn't error out, but I don't get anything that looks remotely useful. I've never used info at all though, to be honest, so could be missing something fundamental.)
Here's what I have. I suppose it could be framed as a patch 1/7 instead.
Martin
-- >8 --
Subject: [PATCH 7/6?] user-manual.conf: don't specify [listingblock]
This is the config file we use when we build the user manual with AsciiDoc. The comment at the top of this chunk that we're removing says the following:
"unbreak" docbook-xsl v1.68 for manpages (sic!). v1.69 works with or without this.
This comes from d19fbc3c17 ("Documentation: add git user's manual", 2007-01-07), where it looks like this conf file in general and this snippet in particular was copy-pasted from asciidoc.conf.
This chunk is very similar to something we just got rid of for the manpages, and because this appears to be aimed at v1.68 -- which we no longer support for the manpages as of a few commits ago --, it's tempting to get rid of this. That reveals an interesting aspect of "works with or without this": it turns out it actually works /better/ without!
Dropping this makes us render code snippets and shell listings using <screen> rather than <literallayout>, just like Asciidoctor does. In user-manual.pdf, this puts the contents into dimmed-background, easy-to-distinguish-from-the-surrounding-text boxes, as opposed to white-background (transparent) boxes.
--- Documentation/user-manual.conf | 10 ---------- 1 file changed, 10 deletions(-)
Documentation/user-manual.conf +0 -10
@@ -9,13 +9,3 @@ tilde=~ [linkgit-inlinemacro] <ulink url="{target}.html">{target}{0?({0})}</ulink> - -ifdef::backend-docbook[] -# "unbreak" docbook-xsl v1.68 for manpages. v1.69 works with or without this. -[listingblock] -<example><title>{title}</title> -<literallayout class="monospaced"> -| -</literallayout> -{title#}</example> -endif::backend-docbook[]
Quoted 11 lines · Martin Ågren
But most importantly: When I looked into the history, I came upon
c2a7f5d438("docs: monospace listings in docbook output", 2012-08-07), which made me worry about breaking "make info". On second thought, I might have broken it many times already over the past few years, since I've never built the info. So maybe worrying about that all of a sudden is a bit unfounded in a way. :-/(I tried to build "info" while working on this. It works in the sense that it doesn't error out, but I don't get anything that looks remotely useful. I've never used info at all though, to be honest, so could be missing something fundamental.)
I don't find "info" useful, either. The big thing it offers over "man" is actual hyperlinks, but linkgit attributes (the only thing we actually bother annotating) don't seem to actually become links! These days I'd expect most people interested in hyperlinking to just use HTML. I wouldn't be surprised if there's some emacs integration with info, though, so maybe people use it there. I dunno. I'd be happy to see all of the info bits go away.
I've add brian to the cc, since he was the last person to touch texi stuff (though he may have just been doing it out of a sense of cleanup/duty).
The .texi generated for the user-manual is the same before and after your patch, so I think it's OK to do.
There _is_ an older regression in the user-manual, though. After commit 03920ac69b (asciidoctor: fix user-manual to be built by asciidoctor, 2017-01-02), the whole front-matter is missing from the generated "git.info" file, and there's a funky ": idm4" node. Nobody seems to have noticed or complained since then (though perhaps people are more likely to look at the manpages than the user manual).
Quoted 2 lines
-- >8 --
Subject: [PATCH 7/6?] user-manual.conf: don't specify [listingblock]
Yeah, this looks good to me (and it looks like Junio already picked it up on top of your series).
-Peff
Quoted 4 lines · Jeff King
Quoted 1 line
Subject: [PATCH 7/6?] user-manual.conf: don't specify [listingblock]
Yeah, this looks good to me (and it looks like Junio already picked it up on top of your series).
Yup, thanks, both.
Quoted 14 lines · Jeff King
Quoted 11 lines · Martin Ågren
But most importantly: When I looked into the history, I came upon
c2a7f5d438("docs: monospace listings in docbook output", 2012-08-07), which made me worry about breaking "make info". On second thought, I might have broken it many times already over the past few years, since I've never built the info. So maybe worrying about that all of a sudden is a bit unfounded in a way. :-/(I tried to build "info" while working on this. It works in the sense that it doesn't error out, but I don't get anything that looks remotely useful. I've never used info at all though, to be honest, so could be missing something fundamental.)
Quoted 7 lines
I don't find "info" useful, either. The big thing it offers over "man" is actual hyperlinks, but linkgit attributes (the only thing we actually bother annotating) don't seem to actually become links! These days I'd expect most people interested in hyperlinking to just use HTML. I wouldn't be surprised if there's some emacs integration with info, though, so maybe people use it there. I dunno. I'd be happy to see all of the info bits go away.
I believe Emacs does have good integration with the info format. I personally prefer documentation in almost any other format and would also be happy to see it go away, but Emacs users may find it convenient.
Junio, I believe you use Emacs. Do you have an opinion on whether, on the whole, Emacs users are likely to make good use of the info documentation?
Quoted 3 lines
I've add brian to the cc, since he was the last person to touch texi stuff (though he may have just been doing it out of a sense of cleanup/duty).
I clearly see the commit in the history with my name on it and the explanation seems like something I might have written, but I have no recollection of touching that code or writing the patch at all. I very likely only touched it because I felt compelled not to introduce a regression (although, as you mentioned, I failed).
Quoted 9 lines
The .texi generated for the user-manual is the same before and after your patch, so I think it's OK to do.
There _is_ an older regression in the user-manual, though. After commit
03920ac69b(asciidoctor: fix user-manual to be built byasciidoctor, 2017-01-02), the whole front-matter is missing from the generated "git.info" file, and there's a funky ": idm4" node. Nobody seems to have noticed or complained since then (though perhaps people are more likely to look at the manpages than the user manual).
If nobody seems to care very much for the info documentation, we could drop it. I've put a query out on Twitter to see if anyone I know is using it.
Signature · 2 lines
brian m. carlson: Houston, Texas, US OpenPGP: https://keybase.io/bk2204
Quoted 7 lines · brian m. carlson
I believe Emacs does have good integration with the info format. I personally prefer documentation in almost any other format and would also be happy to see it go away, but Emacs users may find it convenient.
Junio, I believe you use Emacs. Do you have an opinion on whether, on the whole, Emacs users are likely to make good use of the info documentation?
I probably am very atypical; I used to read even system manuals via info in Emacs, but for the last 10 years or more, I don't. Another reason that makes me a bad judge is because I do not use our doc in any formatted form---"git grep -e ... Documentation/" is easier and faster. So, no, I have no opinion.
Quoted 3 lines
If nobody seems to care very much for the info documentation, we could drop it. I've put a query out on Twitter to see if anyone I know is using it.
Thanks.
Quoted 11 lines · Martin Ågren
In the documentation
Makefileand a few helper conf and xsl files, we carry various workarounds to make the docs build at all or to look better with older docbook-xsl versions. Let's see if we can't just drop that support. All of this seems to have been useful at one point, but I doubt that anyone needs this nowadays. This was also suggested in [1].The final commit in this series bumps the minimum required version of docbook-xsl to 1.74.0, which is from June 2008. The whole series should be a no-op unless you're on an older release than that. That said, I've only tested this with the version that comes with my OS, 1.79.1.
Quoted 6 lines
After this series, user-manual.conf still refers to older docbook-xsl versions. The proper fix there might be to actually be a bit more aggressive and drop that hunk, making the rendered docs prettier. There's some history there, including mentions of texinfo, which is outside my comfort zone. I've got work in progress there, but I'd rather submit that separately from these "expected no-op" patches.
This seems sane to me and I'm all for dropping support for a twelve-year-old version of the DocBook XSL stylesheets. On the odd chance that someone did need to download a newer version, this is a dependency that's easy to set up and build.
Signature · 2 lines
brian m. carlson: Houston, Texas, US OpenPGP: https://keybase.io/bk2204