Better discard support for block devices
v8 cover Better discard support for block devices
The series is a respin of v7:
https://lore.kernel.org/lkml/[email protected]/
with "Reviewed-by" from Gwendal and Bart for PATCH 1/2 and an improved comment in loop_config_discard() in PATCH 2/2.
This series addresses some errors seen when using the loop device directly backed by a block device. The first change plumbs out the correct error message, and the second change prevents the error from occurring in many cases.
The errors look like this:
[ 90.880875] print_req_error: I/O error, dev loop5, sector 0
The errors occur when trying to do a discard or write zeroes operation on a loop device backed by a block device that does not support write zeroes. Firstly, the error itself is incorrectly reported as I/O error, but is actually EOPNOTSUPP. The first patch plumbs out EOPNOTSUPP to properly report the error.
The second patch prevents these errors from occurring by mirroring the zeroing capabilities of the underlying block device into the loop device. Before this change, discard was always reported as being supported, and the loop device simply turns around and does an fallocate operation on the backing device. After this change, backing block devices that do support zeroing will continue to work as before, and continue to get all the benefits of doing that. Backing devices that do not support zeroing will fail earlier, avoiding hitting the loop device at all and ultimately avoiding this error in the logs.
I can also confirm that this fixes test block/003 in the blktests, when running blktests on a loop device backed by a block device.
Changes in v8:
- Improved comment in loop_config_discard() (Darrick/Evan)
Changes in v7:
- Use errno_to_blk_status() (Christoph)
- Rebase on top of Darrick's patch
- Tweak opening line of commit description (Darrick)
Changes in v6:
- Updated tags
Changes in v5:
- Don't mirror discard if lo_encrypt_key_size is non-zero (Gwendal)
Changes in v4:
- Mirror blkdev's write_zeroes into loopdev's discard_sectors.
Changes in v3:
- Updated tags
- Updated commit description
Changes in v2:
- Unnested error if statement (Bart)
Evan Green (2):
loop: Report EOPNOTSUPP properly
loop: Better discard support for block devices
Evan Green (2):
loop: Report EOPNOTSUPP properly
loop: Better discard support for block devices
Evan Green (2):
loop: Report EOPNOTSUPP properly
loop: Better discard support for block devices
drivers/block/loop.c | 48 ++++++++++++++++++++++++++++++++------------ 1 file changed, 35 insertions(+), 13 deletions(-)
Signature · 1 line
2.17.1
PATCH v8 1/2 loop: Report EOPNOTSUPP properly
From: Evan Green <[email protected]>
Properly plumb out EOPNOTSUPP from loop driver operations, which may get returned when for instance a discard operation is attempted but not supported by the underlying block device. Before this change, everything was reported in the log as an I/O error, which is scary and not helpful in debugging.
--- drivers/block/loop.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/block/loop.c +5 -2
@@ -461,7 +461,7 @@ static void lo_complete_rq(struct request *rq)if (!cmd->use_aio || cmd->ret <0 || cmd->ret ==blk_rq_bytes (rq) ||req_op (rq) !=REQ_OP_READ ) {if (cmd->ret <0 ) - ret =BLK_STS_IOERR ; + ret =errno_to_blk_status (cmd->ret); goto end_io; }
@@ -1953,7 +1953,10 @@ static void loop_handle_cmd(struct loop_cmd *cmd) failed:/* complete non-aio request */ if (!cmd->use_aio || ret) { - cmd->ret = ret ? -EIO :0 ; +if (ret == -EOPNOTSUPP ) + cmd->ret = ret; +else + cmd->ret = ret ? -EIO :0 ;blk_mq_complete_request (rq); } }
Signature · 1 line
2.17.1
Re: [PATCH v8 1/2] loop: Report EOPNOTSUPP properly
Quoted 8 lines · Andrzej Pietrasiewicz
From: Evan Green <[email protected]>
Properly plumb out EOPNOTSUPP from loop driver operations, which may get returned when for instance a discard operation is attempted but not supported by the underlying block device. Before this change, everything was reported in the log as an I/O error, which is scary and not helpful in debugging.
Quoted 4 lines
Signed-off-by Evan Green <[email protected]>Reviewed-by Gwendal Grignou <[email protected]>Reviewed-by Bart Van Assche <[email protected]>Signed-off-by Andrzej Pietrasiewicz <[email protected]>
Looks good,
PATCH v8 2/2 loop: Better discard support for block devices
In reply to Andrzej PietrasiewiczFrom: Evan Green <[email protected]>
If the backing device for a loop device is itself a block device, then mirror the "write zeroes" capabilities of the underlying block device into the loop device. Copy this capability into both max_write_zeroes_sectors and max_discard_sectors of the loop device.
The reason for this is that REQ_OP_DISCARD on a loop device translates into blkdev_issue_zeroout(), rather than blkdev_issue_discard(). This presents a consistent interface for loop devices (that discarded data is zeroed), regardless of the backing device type of the loop device. There should be no behavior change for loop devices backed by regular files.
This change fixes blktest block/003, and removes an extraneous error print in block/013 when testing on a loop device backed by a block device that does not support discard.
--- drivers/block/loop.c | 41 ++++++++++++++++++++++++++++++----------- 1 file changed, 30 insertions(+), 11 deletions(-)
drivers/block/loop.c +30 -11
@@ -427,11 +427,12 @@ static int lo_fallocate(struct loop_device *lo, struct request *rq, loff_t pos,* information. */ struct file *file = lo->lo_backing_file; +struct request_queue *q = lo->lo_queue;int ret; mode |=FALLOC_FL_KEEP_SIZE ; -if ((!file->f_op->fallocate) || lo->lo_encrypt_key_size) { +if (!blk_queue_discard (q)) { ret = -EOPNOTSUPP ; goto out; }
@@ -864,6 +865,22 @@ static void loop_config_discard(struct loop_device *lo)struct file *file = lo->lo_backing_file;struct inode *inode = file->f_mapping->host;struct request_queue *q = lo->lo_queue; +struct request_queue *backingq; + +/* +* If the backing device is a block device, mirror its zeroing +* capability. Set the discard sectors to the block device's zeroing +* capabilities because loop discards result in blkdev_issue_zeroout(), +* not blkdev_issue_discard(). This maintains consistent behavior with +* file-backed loop devices: discarded regions read back as zero. +*/ +if (S_ISBLK (inode->i_mode) && !lo->lo_encrypt_key_size) { + backingq =bdev_get_queue (inode->i_bdev); +blk_queue_max_discard_sectors (q, + backingq->limits.max_write_zeroes_sectors); + +blk_queue_max_write_zeroes_sectors (q, + backingq->limits.max_write_zeroes_sectors);/* * We use punch hole to reclaim the free space used by the
@@ -871,22 +888,24 @@ static void loop_config_discard(struct loop_device *lo)* encryption is enabled, because it may give an attacker * useful information. */ -if ((!file->f_op->fallocate) || - lo->lo_encrypt_key_size) { + }else if ((!file->f_op->fallocate) || lo->lo_encrypt_key_size) { q->limits.discard_granularity =0 ; q->limits.discard_alignment =0 ;blk_queue_max_discard_sectors (q,0 );blk_queue_max_write_zeroes_sectors (q,0 ); -blk_queue_flag_clear (QUEUE_FLAG_DISCARD , q); -return ; - } - q->limits.discard_granularity = inode->i_sb->s_blocksize; - q->limits.discard_alignment =0 ; + }else { + q->limits.discard_granularity = inode->i_sb->s_blocksize; + q->limits.discard_alignment =0 ; -blk_queue_max_discard_sectors (q,UINT_MAX >>9 ); -blk_queue_max_write_zeroes_sectors (q,UINT_MAX >>9 ); -blk_queue_flag_set (QUEUE_FLAG_DISCARD , q); +blk_queue_max_discard_sectors (q,UINT_MAX >>9 ); +blk_queue_max_write_zeroes_sectors (q,UINT_MAX >>9 ); + } + +if (q->limits.max_write_zeroes_sectors) +blk_queue_flag_set (QUEUE_FLAG_DISCARD , q); +else +blk_queue_flag_clear (QUEUE_FLAG_DISCARD , q); }static void loop_unprepare_queue (struct loop_device *lo)
Signature · 1 line
2.17.1
Re: [PATCH v8 2/2] loop: Better discard support for block devices
Quoted 50 lines · Andrzej Pietrasiewicz
From: Evan Green <[email protected]>
If the backing device for a loop device is itself a block device, then mirror the "write zeroes" capabilities of the underlying block device into the loop device. Copy this capability into both
max_write_zeroes_sectorsandmax_discard_sectorsof the loop device.The reason for this is that
REQ_OP_DISCARDon a loop device translates intoblkdev_issue_zeroout(), rather thanblkdev_issue_discard(). This presents a consistent interface for loop devices (that discarded data is zeroed), regardless of the backing device type of the loop device. There should be no behavior change for loop devices backed by regular files.This change fixes blktest block/003, and removes an extraneous error print in block/013 when testing on a loop device backed by a block device that does not support discard.
Signed-off-by Evan Green <[email protected]>Reviewed-by Gwendal Grignou <[email protected]>Reviewed-by Chaitanya Kulkarni <[email protected]>[used updated version of Evan's comment in loop_config_discard()]Signed-off-by Andrzej Pietrasiewicz <[email protected]>--- drivers/block/loop.c | 41 ++++++++++++++++++++++++++++++----------- 1 file changed, 30 insertions(+), 11 deletions(-)drivers/block/loop.c +3
-1@@ -427,11 +427,12 @@ static int lo_fallocate(struct loop_device *lo, struct request *rq, loff_t pos,* information. */ struct file *file = lo->lo_backing_file; +struct request_queue *q = lo->lo_queue;int ret; mode |=FALLOC_FL_KEEP_SIZE ; -if ((!file->f_op->fallocate) || lo->lo_encrypt_key_size) { +if (!blk_queue_discard (q)) { ret = -EOPNOTSUPP ; goto out; }@@ -864,6 +865,22 @@ static void loop_config_discard(struct loop_device *lo)struct file *file = lo->lo_backing_file;struct inode *inode = file->f_mapping->host;struct request_queue *q = lo->lo_queue; +struct request_queue *backingq;
drivers/block/loop.c static void loop_config_discard(struct loop_device *lo) · line 878
Quoted 10 lines
drivers/block/loop.c +10
-0+ +/* +* If the backing device is a block device, mirror its zeroing +* capability. Set the discard sectors to the block device's zeroing +* capabilities because loop discards result in blkdev_issue_zeroout(), +* not blkdev_issue_discard(). This maintains consistent behavior with +* file-backed loop devices: discarded regions read back as zero. +*/ +if (S_ISBLK (inode->i_mode) && !lo->lo_encrypt_key_size) { + backingq =bdev_get_queue (inode->i_bdev);
The backingq could move into this local scope.
drivers/block/loop.c static void loop_config_discard(struct loop_device *lo) · line 891
Quoted 1 line
drivers/block/loop.c +1
-0+ }else if ((!file->f_op->fallocate) || lo->lo_encrypt_key_size) {
No need for the inner braces.
But the actual functionality looks good to me.
Re: [PATCH v8 2/2] loop: Better discard support for block devices
Hi Christoph,
W dniu 03.04.2020 o 08:39, Christoph Hellwig pisze:
Quoted 3 lines · Andrzej Pietrasiewicz
Quoted 2 lines
From: Evan Green <[email protected]>
<snip>
Quoted 14 lines
drivers/block/loop.c static void loop_config_discard(struct loop_device *lo) · line 878
Quoted 11 lines
drivers/block/loop.c +11
-0+struct request_queue *backingq; + +/* +* If the backing device is a block device, mirror its zeroing +* capability. Set the discard sectors to the block device's zeroing +* capabilities because loop discards result in blkdev_issue_zeroout(), +* not blkdev_issue_discard(). This maintains consistent behavior with +* file-backed loop devices: discarded regions read back as zero. +*/ +if (S_ISBLK (inode->i_mode) && !lo->lo_encrypt_key_size) { + backingq =bdev_get_queue (inode->i_bdev);The backingq could move into this local scope.
Quoted 6 lines
drivers/block/loop.c static void loop_config_discard(struct loop_device *lo) · line 891
Quoted 1 line
drivers/block/loop.c +1
-0+ }else if ((!file->f_op->fallocate) || lo->lo_encrypt_key_size) {No need for the inner braces.
But the actual functionality looks good to me.
Would you A-b or R-b if I corrected the two small issues which you found?
Andrzej
Christoph Hellwig
Reviewed-byRe: [PATCH v8 2/2] loop: Better discard support for block devices
Quoted 10 lines · Andrzej Pietrasiewicz
Quoted 8 lines
The backingq could move into this local scope.
drivers/block/loop.c static void loop_config_discard(struct loop_device *lo) · line 891
Quoted 1 line
drivers/block/loop.c +1
-0+ }else if ((!file->f_op->fallocate) || lo->lo_encrypt_key_size) {No need for the inner braces.
But the actual functionality looks good to me.
Would you A-b or R-b if I corrected the two small issues which you found?
Sure: